@ManRossDamn the single box weigth is 54kg, so not much load. The chain hoist is rated at 1t (using 1:8 safety ratio). This one doesn't have double brake, so it can bet used for lifting only, suspension has to be done with wire rope or sling.
Yup, people form Next (CVA) did a great work here. Most PA engineers are blown away by performance and list price of this system. We had several major local festivals with B class stars (Kate Ryan, Safri Duo, Mando Diao, etc.) - only good references. I've also supplied this kind of rigging solution for other brands speakers.
You're right, no cables were attached as this video was done in our warehouse to show just rigging procedure. Cables are about 90 seconds for such configuration. P.S. we did some bigger rigs this summer, with 14 boxes per frame and it went with no problems.
@BigHeartedMan65 well, I see your point, but there really is no place to put pins with cabinet, so we decided to have them with frames and bring always some extra. If we forget the frame box, then there is no need for pins anymore, is there? :)
@ffgato76 well, out guys been pushing different rigs arround long before and when we created the system we wanted it to be as portable as possible. This way you need only 2 people to carry whole rig. If it was done like Meyer style when there is dolly with 4 boxes stacked you wouldn't be able to get that upstairs and up/down the ramp without equipment. The system has been out for more than 200 events and so far no problems with assembly speed - whole rig (28 boxes) go up in less than hour.
Nope, no US activities so far - just Baltic states and bit of Scandinavia. If question stands about the solution shown in video, Next factory agreed that we produce and supply these parts for anyone interested.
Portugal is the BEST!!!!! Next is a portuguese company that some people knows has CVA!!!! congratulations for the system! I have the same system than you! felicidad!!!
KLA is not really a line array, that is multipurpose 15' speaker, so it falls in different category. Their locking mechanism is neat, however not sure will it last long.
@cardboardcat15 you either start as a freelancer in some local PA company and if you show some interest and skill you might go up the hierarchy with a time or you go to get enigneer degree in some technical university and then get some PA company to hire you as a specialist. Both can take about same time.
is hard work and movement that must be done and takes a long time to put together and this does not seem the best technique because what we want is that you can build in the shortest possible time, have to think about other ways to assemble these speakers
Del:español Al:inglés Traducción de texto o de páginas web es mucho trabajo y movimiento el que hay que hacer y se lleva mucho tiempo en armar y esta no me parece la mejor tecnica puesto que lo que se quiere es que se pueda armar en el menor tiempo posible, tienen que pensar en otras formas de armar estas bocinasTraducir del: español Escribe texto o la dirección de un sitio web, o bien, traduce un documento. Cancelar EscucharLeer fonéticamente
@ManRossDamn the single box weigth is 54kg, so not much load. The chain hoist is rated at 1t (using 1:8 safety ratio). This one doesn't have double brake, so it can bet used for lifting only, suspension has to be done with wire rope or sling.
Yup, people form Next (CVA) did a great work here. Most PA engineers are blown away by performance and list price of this system. We had several major local festivals with B class stars (Kate Ryan, Safri Duo, Mando Diao, etc.) - only good references. I've also supplied this kind of rigging solution for other brands speakers.
Nice video! Very professional!
You're right, no cables were attached as this video was done in our warehouse to show just rigging procedure. Cables are about 90 seconds for such configuration.
P.S. we did some bigger rigs this summer, with 14 boxes per frame and it went with no problems.
Hi there - what's up in Mexico? Next time I'll be in CA, will find few extra days to go and chec myself. The track is Belladonna - Meltin' Guitar
@BigHeartedMan65 well, I see your point, but there really is no place to put pins with cabinet, so we decided to have them with frames and bring always some extra. If we forget the frame box, then there is no need for pins anymore, is there? :)
This is awesome
@ffgato76 well, out guys been pushing different rigs arround long before and when we created the system we wanted it to be as portable as possible. This way you need only 2 people to carry whole rig. If it was done like Meyer style when there is dolly with 4 boxes stacked you wouldn't be able to get that upstairs and up/down the ramp without equipment. The system has been out for more than 200 events and so far no problems with assembly speed - whole rig (28 boxes) go up in less than hour.
Nope, no US activities so far - just Baltic states and bit of Scandinavia. If question stands about the solution shown in video, Next factory agreed that we produce and supply these parts for anyone interested.
Cool video
@leefanyee, well there actually is no problem to keep the pins in frame box. No frames, no pins :)
thank you very much amigo esta muy bueno el video felicidades 5 stars
Portugal is the BEST!!!!! Next is a portuguese company that some people knows has CVA!!!! congratulations for the system! I have the same system than you! felicidad!!!
KLA is not really a line array, that is multipurpose 15' speaker, so it falls in different category. Their locking mechanism is neat, however not sure will it last long.
@ManRossDamn , well I'd love to :) For now I show up there just for the NAMM
anyone notice that they didn't run the input?
imagine if that ENTIRE array just fell at a concert...dat damage.. lol :P
@cardboardcat15 you either start as a freelancer in some local PA company and if you show some interest and skill you might go up the hierarchy with a time or you go to get enigneer degree in some technical university and then get some PA company to hire you as a specialist. Both can take about same time.
is hard work and movement that must be done and takes a long time to put together and this does not seem the best technique because what we want is that you can build in the shortest possible time, have to think about other ways to assemble these speakers
@SanctumStudios any idea for replacement?
How does one become a part of this profession?
@djtes90 well, never happened to us during last 20 years, however I've seen these things happening. No fun at all
what music is lol good im mexican good 5*****
Del:español Al:inglés Traducción de texto o de páginas web
es mucho trabajo y movimiento el que hay que hacer y se lleva mucho tiempo en armar y esta no me parece la mejor tecnica puesto que lo que se quiere es que se pueda armar en el menor tiempo posible, tienen que pensar en otras formas de armar estas bocinasTraducir del: español
Escribe texto o la dirección de un sitio web, o bien, traduce un documento.
Cancelar
EscucharLeer fonéticamente
@ddfflv not sure but sounds like elevator music or bad porn music lol. maybe something with guitars & drums etc : )
QSC KLA line array is easier to fly