Im really hating being just ok at doing stuff...especially when i used to be much better at doing stuff. I hate getting old and hope y'all stay young forever
Man, that rain depresses me all the way from Washington. I want my droughts back! On a positive note, I have never eaten cats, and I don't know this car but damn, that is a beautiful build!
When the second set of injectors come on would it be possible to drop the duty cycle on the first set so that you don't have to run the second set so low? Then ramp up from there?
You could yes. But remember thats on gate boost pressure during initial fire up/tune. As Pete starts increasing boost closer to the real world tune, the increase in air takes the over rich stumble right out of the equation. Your thinkin "make leaner" by cutting fuel. Petes just addin air to get the same result.
I been watching you engine builds on the LS at cleetus, could I pick someones brain I'm in Australia and I'm building an LS Stroker, ive got lunati crank, Manley 6.125 h-been rods JE Flat top pistons, heads are ported, I got sheet metal intake manifold & 102mm TB but may change that not sure, I've purchased yellas terra 1.7 shaft roller rockers, double valve springs moly retainers, full ARP stud kit mains and heads, I have got a 98mm turbo 2x 50mm wastegates' and 2x 50mm pop valves, 4" pipe kit 5.125" 600mm x 300mm air to air intercooler, 2400cc injectors custom made headers, I'm now at the point of getting a cam for it. I have no idea what to get currently no views of hyd or solid I'm easy, can someone give me an idea what size cam I should run? this is my 1st LS build I don't really know very much about them, car will be used for drag racing, anyone?
If you ever want to have an online digital guitar jam, or send some recordings over, let me know. I just got a nice line converter and digital processor setup for my new computer. I've got 1984 custom shop fender pickups in a custom 2 piece mahogany stratocaster body. The pickups were beeswax dipped, dated and signed by "J R P " 04/07/84
Interesting to see that Cleet will be running FuelTech, Holley and Haltech on his fleet. Doesn't feel like the easiest way to make the tuning and data analysis consistent!
@@craigm5511 yep, he could definitely ditch one or two and simplify things a little. But when you have his money and his exposure, they will bend over backwards to drop everything and help when needed
Huge weight saving! Newb question - after each dyno pull, he shifted to what I assume is a clean neutral. Why does it take about a second each time for the rpm to suddenly drop? Thanks!
Nevermind you answered ny question next pull. 😂Hold up is the ipw only like 2.56ms on these 20 psi pulls? So is that 2.56ms per set for at total of 5.12ms of fuel?
Definitely can't wait for content on the Nova and you did a pretty good job with the Dale truck today what do you think of putting nitrous on the trans button when he releases nitrous comes on for one second to help spool it quicker
The new song had me loling
I CAN'T WAIT!!! I WANNA BE REAL GOOD AT DOIN STUFF!!!
They’re eating the cats 😂😂😂😂❤
Damn Pete the Dale Truck is ripping. It's almost like you're real good at doing stuff.
Is that available on iTunes? lmao!
Hi Pete the last time I said where I was from I said the UK. it’s a town called Somerset in England. Good day to you sir.
Thank you, Peter, you the best at doing stuff!
1 downvote, you touched a nerve with the new song lmao 😅😂
Probably the best new single released in 2024.
Im really hating being just ok at doing stuff...especially when i used to be much better at doing stuff.
I hate getting old and hope y'all stay young forever
My eyes are watering from exhaust just watching lol
Trump Needs To Come Out To "They're Eating The Cats" At One Of His Rallies!!!!!!!!!!!!
Man, that rain depresses me all the way from Washington. I want my droughts back! On a positive note, I have never eaten cats, and I don't know this car but damn, that is a beautiful build!
That " what r they eatin song " sounds good on the system from hell " ... LOL
Nice job meat 🍖
Their eating the cats 😂classic
I can’t wait!
I CAN'T WAIT!
Your channel is awesome. I really enjoy your music clips with the words you use.😂
When the second set of injectors come on would it be possible to drop the duty cycle on the first set so that you don't have to run the second set so low? Then ramp up from there?
You could yes. But remember thats on gate boost pressure during initial fire up/tune. As Pete starts increasing boost closer to the real world tune, the increase in air takes the over rich stumble right out of the equation. Your thinkin "make leaner" by cutting fuel. Petes just addin air to get the same result.
Lemme get my RGADS shirt. LETS GO
bro they are eating the cats, trump 2024
They are eATING YOUR PETS!!!!
That's what the song said bro
Trump makes up some crazy shit.
I been watching you engine builds on the LS at cleetus, could I pick someones brain I'm in Australia and I'm building an LS Stroker, ive got lunati crank, Manley 6.125 h-been rods JE Flat top pistons, heads are ported, I got sheet metal intake manifold & 102mm TB but may change that not sure, I've purchased yellas terra 1.7 shaft roller rockers, double valve springs moly retainers, full ARP stud kit mains and heads, I have got a 98mm turbo 2x 50mm wastegates' and 2x 50mm pop valves, 4" pipe kit 5.125" 600mm x 300mm air to air intercooler, 2400cc injectors custom made headers, I'm now at the point of getting a cam for it. I have no idea what to get currently no views of hyd or solid I'm easy, can someone give me an idea what size cam I should run? this is my 1st LS build I don't really know very much about them, car will be used for drag racing, anyone?
If you ever want to have an online digital guitar jam, or send some recordings over, let me know. I just got a nice line converter and digital processor setup for my new computer. I've got 1984 custom shop fender pickups in a custom 2 piece mahogany stratocaster body. The pickups were beeswax dipped, dated and signed by "J R P " 04/07/84
You're so talented. Thank you for the great entertainment. Thank you for sharing and teaching the masses.
Cats Lives Matter
1:03 heavy tune!
Great new song. Cool content as usual. Hope everyone west of y'all gets through the flooding OK. Brutal images so far.
Justin has a very nice drag/show car! From what I could see, it's immaculate! Plenty of power!
Awesome close out with the song. Good stuff my friend keep it up. Like button energized.
Thanks for the video Pete. My wife’s new code word(Eating the cat)😂
the new single rocks different!!!
also Justin's car is in my top 3 coolest race cars on the internet.
Great video as usual. Would be cool if you could elaborate on hub dyno number difference.
Are you real good at doing stuff🤏🏻🤘🏻🤘🏻
🐱🐈🐈🐈🐈😂😂😂😂🇺🇸
Justin's damn good at doin stuff. Beautiful!
Hello from 🇸🇪
/Real good stuff doer
Great content thanks for sharing
I’m still learning shit !
Great tune, music and engine!!
AND the damn ducks! We caint have it!
Praise The Lord.
Will you be tuning Cleetus's new Eagle? We wanna see that thing eat cats!
Interesting to see that Cleet will be running FuelTech, Holley and Haltech on his fleet. Doesn't feel like the easiest way to make the tuning and data analysis consistent!
@@craigm5511 yep, he could definitely ditch one or two and simplify things a little. But when you have his money and his exposure, they will bend over backwards to drop everything and help when needed
The channel is great but im sorry the music SUCKS SO BAD!!!!!!
Huge weight saving! Newb question - after each dyno pull, he shifted to what I assume is a clean neutral. Why does it take about a second each time for the rpm to suddenly drop? Thanks!
Nevermind you answered ny question next pull. 😂Hold up is the ipw only like 2.56ms on these 20 psi pulls? So is that 2.56ms per set for at total of 5.12ms of fuel?
That new 'cat song' sounds good Pete. That dirty bass is stanky :) Skills progressing nicely.
Is it just me or does going from one set of 325lb/hr injectors to 2 sets of 720"s seem a bit overkill for just switching to methanol alone?
Dude if you can get 2 sets of 720 to run clean together during spoolup and thru the 60ft that blows my mind.😮
Holley should make injector data more detailed so you can attempt to tell the computer what the injectors flow across their full range.
Content is on fire Pete. Please give us more uploads we need this content to be real good at doin stuff.... cheers from scotland 👍
Definitely can't wait for content on the Nova and you did a pretty good job with the Dale truck today what do you think of putting nitrous on the trans button when he releases nitrous comes on for one second to help spool it quicker
I can't wait I can't wait❤🏁💪🏼Nova badass 🤪 love it hope you boy's have a great weekend ok later
That is super nice car. I always wonder about turbo oiling and draining with the turbos on an angle like that.
Your kids turning 21, gonna start drinking heavy 😆
best OST's known to man. Arguably real good at doin stuff.
Love the breakdown in beginning of video seems like a fun guy
I didn’t think you could top the all intros, now they are all eating the cats!!!!
The new song is funny az. Thanks for the laughs from Australia.
I didnt expect the slam on hub dyno numbers yet was happy to hear it.
A tire dyno does tell you more real world numbers
Surprised you can get a solid pull with all that moisture in the air. Great looking unit.
Does he have any issues with oil in the turbos? I know some turbos have a maximum angle. But I like this set up
Freakin awesome man....and, they are eating the cats 😂
Some say he does stuff. Others say hes real good. Find out on todays episode!
Pete,y'all rock! Love the channel and content. There reading the cats!😂 Peace
Does the fire suppression system need any changes with the new fuel? Good stuff doooooers
Hell yeah.. they are most definitely eating the cats.... 😅
Thanks for sharing this awesome car he brought it to the right dude to get it tuned.👍
What in tarnation, twin turbo on a hub dyno and you don't make 5000hp lol.
“You can fix everything with boost!” That’s a t-shirt.
Proving once again, the greatest show RUclips.
Dang 3270? I guess i see why he needs all that fuel after all😂
That Opening RIff Thumps !!!🤘
THEY'RE EATING THE CATS! 😂
Lmfao.. they're eating the cat's. .
Awesome video as usual! I appreciate it!!
Interesting. You're good at doing stuff!
too many horse torques eating the cats 🤣
Awesome video thank you!
Good video on Methenol conversion....
I love this channel...
LMMFAO, There eating the cats!
This new tune slaps \m/
ARE YOU.....REAL GOOD AT GRILLIN STUFF
New tune has Mastodon vibes. I dig it.
Loving the new song!
Hope yall are safe from the hurricane
that chevelle is real nice, great work pete.
How did you get at doing good at doing stuff
they are eating the cats. LMAO!!!
I cant believe how little blow by there is.
Justin’s car is so bad a$$!
Hell yea brother
Thanks for the video.
Fix it with boost!
Lamayo @ the intro song.
Kay One Doubl U One
Can you tune bikes?
🙀Argghhh
Sweet awsome power