One thing I think might be very helpful to new folks is that even though holes are distributed evenly throughout the image, you've got to think of them as "lines of holes", because I couldn't figure out how a round hole could have an "angle"... but I noticed a difference in my test prints. It took me a while to recognize what was happening... but as soon as I was able to see them as lines of holes, it was much easier to see how the images were changing when only the angle was changing. Just a thought... ;-)
No, premium stretch uses a different time and temp. The latest instructions can be found here: www.icolorprint.com/resource-library/IColor_Premium_Stretch_2Step_Textile_Transfer_Paper_Instructions.pdf
its so informative for a beginner like myself. i just got Icolor650 my biggest issue is marrying two sheets, when ever i do that all the ink stick to the B sheet instead of just the glue. can someone tell me what i am doing wrong or is there anything I am missing. I have a Hotronix fusion heat press. with temp of 310 pressure 7 and time about 120 sec.
This can happen if you are not peeling fast enough! You must peel while hot on the press. Consider adding the White Toner Masterclass for a guided tutorial
Thank you so much for your hard work, very interesting and meaningful video.
Thank you!
One thing I think might be very helpful to new folks is that even though holes are distributed evenly throughout the image, you've got to think of them as "lines of holes", because I couldn't figure out how a round hole could have an "angle"... but I noticed a difference in my test prints. It took me a while to recognize what was happening... but as soon as I was able to see them as lines of holes, it was much easier to see how the images were changing when only the angle was changing. Just a thought... ;-)
My I550 arrives today! this will be very helpful, thanks for putting this series of videos together!
our pleasure, good luck with your printer!
HEllo Thank you! This was SUPER HELPFULL! Does the same time, and pressure apply to premium stretch?
No, premium stretch uses a different time and temp. The latest instructions can be found here: www.icolorprint.com/resource-library/IColor_Premium_Stretch_2Step_Textile_Transfer_Paper_Instructions.pdf
its so informative for a beginner like myself. i just got Icolor650 my biggest issue is marrying two sheets, when ever i do that all the ink stick to the B sheet instead of just the glue. can someone tell me what i am doing wrong or is there anything I am missing. I have a Hotronix fusion heat press. with temp of 310 pressure 7 and time about 120 sec.
This can happen if you are not peeling fast enough! You must peel while hot on the press. Consider adding the White Toner Masterclass for a guided tutorial
I have the Oki9541 and was wondering is the football graphic only available through the iColor package?
You can purchase the art libraries here: www.icolorprint.com/products/graphics
I can not figure out how to increase the ink, change colors to match my cymk, and keep lines smaller.. can you help
Check out her newer video on that subject: Improving Color For White Toner Printers
ruclips.net/video/9Lh4fwJJZZ4/видео.html