Very Nice Matthias! Those hand plane holsters are beautiful! I will say one of the advantages I have found to the french cleat system is the ability to grab a whole grouping of tools and bring them over to a work station. I keep a cleat on many of my tables, and can hook on my sandpaper organizer, small clamp collection, assorted drivers and so forth as needed. Thanks for the video!
Beauty is in the eye of the beholder. I have two walls in my shop using french cleats. I have rearranged each wall about five times so far. I like the ability to move cabinets, shelves, clamp racks, plane holders, etc. at will. I think the french cleats work well when the walls have been sheet rocked and it's hard to locate studs. In my next house, I plan to line the walls with OSB, and they I'll use your 'screw it on anywhere' method.
Both systems have their advantages. The main reason I like french cleats, regardless of shop project or not, is the ease of hanging. Being able to attach a cleat to the back of a wall cabinet and simply set it in place is so much easier than trying to hold it and screw it to the wall at the same time. Even if it's not a whole system of cleats mounted to the wall. Just put a cleat where you're going to hang something big and hanging is a breeze. I like what you did for smaller items. I like what I did for larger items. I might have to steal your plane holder idea though. Pretty nifty.
Matthias Wandel They take up a lot of depth space too, and in my shop, every cubic cm counts.I used french cleats to mount the cabinet itself, and wouldn't do it a different way. My planes would just not fit though. I'll make a separate cabinet for them, but next up is a sandpaper box. This is my year to organize, finally.
I would agree with the general consensus: Cleats for larger/heavier items and simple wall mounts for the small things. That said, I have found that for wall mounting it was generally faster, just as simple, and more adaptable to use peg board for the wall sheeting. it is still simple to make the hangers from scraps, but it allows for greater ease of arrangement and re-arrangement over time. My Grandfather placed a simple sheet of dark brown paper over his and used a white china marker to lable things, hiding the "extra" holes and greatly improving the contrast between the tools, racks, and wall.
I really like how you think of the little things like that little slot to stop the thing from sliding sidewise. There is always ingenuity in your creations.
Always greatly appreciate the time and care you put into something as insignificant as mounting a drill index to a wall. All the small touches of hogging away waste just for the perfect fit, the addition of water-based varnish. Just the pure enjoyment and satisfaction you get with something so simple, and the little things like that in a shop adds to the positive experience of working in a wood shop. Whenever it turns into a hurry, you've lost the joy in the process of making. Love your intelligent and experienced view of everything in the world of woodworking and beyond. Always learn something watching your videos and greatly appreciate your contributions and free education you contribute to the web.
I have to admit that I love french cleats and use them in my shop. But I do see your point. Your wall of tools looks nice and organized. Thanks for sharing.
good video matthias,very helpful. i used to use the "married cleat system"...i'd lend my wife a philips screwdriver and never see it again...very inefficient.
I'm a big fan of the "too many cleats not enough brains" system. I buy a set of bits, use one, set it on top of the fridge while getting a snack, lose all memory of doing so, spend four weeks looking for it, eventually buy another set because they don't come in single bits, and finally find it again when the cat gets up on the fridge and knocks it into my dinner.
percy thrillington I'm thrilled that she was an only child. My Brothers In Law don't mess with mere bits, they take the bit set, battery powered drill, charger, extra batteries, standing drill press, and the coolest shop radio, THEN it all disappears.
I recently arranged my tool cabinet. The first time, I hot glued everything and the first hot day (in Georgia) it all fell off and it stayed that way for 15 years. I finally got tired of not finding tools and made a mini-french-cleat system for part of it. I wish I hadn't done that now. For the rest of it, I made custom holders for each one like you did. I like them much better.I did the same thing for all my drill bits and router bits, but made wood blocks with holes for them. I am so pleased with how it turned out.
It's a good idea, but in our workshops new tools are always added, eliminating some or changing them for others. The french system has the enormous advantage of allowing the relocation of tools in a very easy and fast way. Thank you for the video. Greetings from Spain.
I like your individual tool holders, in particular, the plane holders. I also like the concept of using French cleats, perhaps for those heavier items, i.e., cabinets, multiple clamp holders, etc... My " Man Cave " will have a combination of both systems once my shiplap boards are up in the very near future. It is all about getting organized... Thanks, Bill on the Hill... :-)
Tip: When drilling out rivets, start with a small bit at a slight angle that will punch through but not cut the outer profile of the rivet, follow it by a larger bit. This avoids the drill bit walking off the rivet head into your hand or scratching the case you may want to re purpose.
Love it. I just started setting up my garage and I just screwed in plywood over the drywall into the studs so I can hang what I want when I want. Thanks for posting your vids. Also I am almost done making three twin beds based on your plans I modified a bit here and there to fit our needs. I will take some pictures and send them your way.
Matthias Wandel hi bro , where are from , i want i meet you can u give me your contact number or skype viber whatsapp ,iwanna i see your workshop i like it
This is an awesome storage setup. I just got back from buying 1/2" birch plywood and 1"x8"x8ft maple planks to build a french cleat system but now I'm not so sure after seeing your setup. Thanks for that....
I made a toolboard with an mdf board and then filled it up with as many nails as needed to hold the tools. It's easy and effective, but not nearly as nice as your solution, Matthias. Maybe I'll get the chance to do something like that someday, I would like that. Nice work.
I'm 12 I just got my first real shop and I made a French cleat system but what I did to solve my dust and chip issue was I raised my French cleats off the wall. It solves the problem and I think it looks a little better too
Well I'm 50, totally disorganized with shit piled up on random shelves, but I came here to suggest a spaced cleat through which the dust could fall. It made me smile with optimism to know that a 12 year old not only beat me to the suggestion, but actually implemented the solution. Keep it up!
Love this. I recently moved and remodeled a garage into an electronics and woodworking workshop, so I'm definitely planning to copy your ideas since I too find pegboards really ugly.
I used to hang tools on the wall but then decided to just keep them all in my big tool boxes instead, I do keep my drill bits out close to my drill press.. All my hand planes are kept in a huge mahogany box just like great grandpa did.. Worked for him for 70+ years.. Nice setup Matthias.. Gary/Hk @ The Wood Shed..
I like french cleats for the "big" stuff and have four or five rows of them in the shop. I'm perfectly fine with hanging panels on them with holders for all the small tools though.
I started with a french cleat wall but got sick of making hanger cleats for each item. So I started making larger "panels" that hold more then one holder and all those cleats just ended up getting covered. Like other comments I've been seeing. I like both systems but each has a purpose that its better suited for. Cleats for big and just panel up for small.
I did something like this in my garage, but I hanged so much crap on it that it eventually fell on me one morning and I was left with tools scattered all over the floor. *Gearheads be warned, just because you found a really neat way of hanging your 17 pound bearing extractor to the wall, does not mean you should do it!*
Love the organization system. for the drill bits, have you ever thought of making the drills tilt towards you (angled a little bit away from the wall). it would be more work but you could save on wall space and avoid the clearance issue at 3:54. just a thought. keep up the great ideas
I love organized tools. It makes doing a project take a lot less time. I just simply use a 2 or 3 inch deck screw for things that only require it, like wrenches, but having a wooded holder is ideal.
Love this . Thank you for sharing. I am currently reclaiming my shop and this helped. There are so very many hand tools to organize. I did get the woodstove in before winter . :) I've watched a lot of vids but this one suits me well. Again, Thank you. Peace
Clean and easy. For getting the drills out a bit easier (especially those underneath) I got the idea of tilting the whole thing just a tiny little bit.
Matthias, I'm new to your channel, and enjoy your genius and organization. I find the level of your fastidiousness hilarious! And if you were on a job with me, I would throw you out of a window in fifteen minutes. Keep up the good work. Love the channel.
The configurability of a cleat system is good for a beginner (like myself) as I'm constantly adding new tools and needing to move things about. Mine have a cam lever on the bottom that locks them rigid.
Turn your drill bits over in the orgnizers...not only can you can see see the size markings on the bits, but more importantly it is much easier on your hands when you go to pull a bit out!
...when you're in-between projects and just want to spend time in the shop.... this is what happens. I love the plane storage idea... my favorite so far. Gonna steal it, or borrow it for my shop.
Five years later; I usually would go for the tang of a file or a reamer to remove a rivet, instead of a drill, even if the hole is that tiny. There's not that much metal to remove and like the video shows, a high speed drill slips and you can actually hurt yourself that way! Thanks so much for the content, keep up the good work. בס״ד
My next shop task is a tool wall storage system. I was TOTALLY sold on a French cleat system until I saw this video. Thanks for posting Matthias. Alistair
Just get a 4x8 foot custom neodymium magnet and you can just toss the tools to the wall and let them stick! Just need like $2,000 for that custom magnet and devise a way to stop any metals filling from getting ripped out of your mouth. :-)
Even though I'm reading your comment in 2017, you definitely won the internet today. I laughed loudly out and chuckled and chortled. Thanks for the giggles.
Love the brackets you made for the hand planes, could you show more on how they were made? I made a inclined till for the larger planes but would like to make something like those for the block planes.
Well that's a darn site neater than my system which mostly involves just nails and screws to hold my tools on the wall. Bit of a mish mash but it has a rustic charm, at least that's my story.
I love your videos. I want to make one of these, but a mobile version with the entire thing on casters, so I can store it in a different place from where I use it.
Some of us aren't satisfied with it staying the same forever and ever... That is the only reason I went with a french cleat system. Albeit it's more a double cleat system: Ran the boards thru a 3 1/8" fence with the saw at 45* angle and then flipped it so there is a cleat on both top and bottom. Spaced them so leftovers can slide between them on the wall so more options for mounting are opened up... Love yer work but a lot of us are redo-ing our work environment often enough to warrant a french cleat (I feel I have to defend it since I just spent 3 days cutting / mounting / painting mine!)
Fun stuff. I like it, because it represents a sense of order. Personally, I have a thing about keeping stuff out of sight. Not necessarily for reasons of theft either. Just a personal quirk. I like the little holders. I have a few of them as well, but they're inside a hanging tool cabinet. See *quirk* above.
Yeah I got annoyed with my drills in the box too and set them up the same way, it's really great. Can see what's missing, easy access and no more broken bits from closing or opening the box wrong.
The worst thing you can do is to place racks or shelving for storing tools. I like your system and others similar to it. I have to figure out how to get started given the quagmire which I created.
Matthias, In this project you talked about the length of time you left the project cure. When provided, I find the length of time very helpful and interesting. Could you expand on three way ratio between volume of glue used : curing time : strength or durability.
Personally, I still prefer the french cleats.. like you say, this is more work and reqs a bit more planning up front.. as I you swap in and out additional tools, another fixture needs to be created.. possibly a good idea against the debris getting into the cleat would be a filler strip?
I have gone through all your comments, my suggestion is just insert 3 to 4 mm washer between the fixed portion of the cleat and the Plywood/wall, so that a gap will form, whenever the saw dust falls on the cleat , it will automatically come down from the gap created by the washer. The issue of saw dust is solved.......
You're on the way. Now make a rolling cart to hold your most used hand tools to have them within reach wherever you are in the shop. Some of your tool holders can use some tweaking to make them hold the tools so you can grab the tools easily.
Very Nice Matthias! Those hand plane holsters are beautiful!
I will say one of the advantages I have found to the french cleat system is the ability to grab a whole grouping of tools and bring them over to a work station. I keep a cleat on many of my tables, and can hook on my sandpaper organizer, small clamp collection, assorted drivers and so forth as needed.
Thanks for the video!
This!
Beauty is in the eye of the beholder. I have two walls in my shop using french cleats. I have rearranged each wall about five times so far. I like the ability to move cabinets, shelves, clamp racks, plane holders, etc. at will. I think the french cleats work well when the walls have been sheet rocked and it's hard to locate studs. In my next house, I plan to line the walls with OSB, and they I'll use your 'screw it on anywhere' method.
Both systems have their advantages. The main reason I like french cleats, regardless of shop project or not, is the ease of hanging. Being able to attach a cleat to the back of a wall cabinet and simply set it in place is so much easier than trying to hold it and screw it to the wall at the same time. Even if it's not a whole system of cleats mounted to the wall. Just put a cleat where you're going to hang something big and hanging is a breeze.
I like what you did for smaller items. I like what I did for larger items. I might have to steal your plane holder idea though. Pretty nifty.
Or hang some ply on the french-cleats and screw small-tool-holders onto that.
For larger cabinets, I definitely agree. For individual tools, rows of cleats are too bulky, and cut down too much on flexibility.
Matthias Wandel They take up a lot of depth space too, and in my shop, every cubic cm counts.I used french cleats to mount the cabinet itself, and wouldn't do it a different way. My planes would just not fit though. I'll make a separate cabinet for them, but next up is a sandpaper box. This is my year to organize, finally.
I would agree with the general consensus: Cleats for larger/heavier items and simple wall mounts for the small things. That said, I have found that for wall mounting it was generally faster, just as simple, and more adaptable to use peg board for the wall sheeting. it is still simple to make the hangers from scraps, but it allows for greater ease of arrangement and re-arrangement over time. My Grandfather placed a simple sheet of dark brown paper over his and used a white china marker to lable things, hiding the "extra" holes and greatly improving the contrast between the tools, racks, and wall.
I really like how you think of the little things like that little slot to stop the thing from sliding sidewise. There is always ingenuity in your creations.
Always greatly appreciate the time and care you put into something as insignificant as mounting a drill index to a wall. All the small touches of hogging away waste just for the perfect fit, the addition of water-based varnish. Just the pure enjoyment and satisfaction you get with something so simple, and the little things like that in a shop adds to the positive experience of working in a wood shop. Whenever it turns into a hurry, you've lost the joy in the process of making. Love your intelligent and experienced view of everything in the world of woodworking and beyond. Always learn something watching your videos and greatly appreciate your contributions and free education you contribute to the web.
I have to admit that I love french cleats and use them in my shop. But I do see your point. Your wall of tools looks nice and organized. Thanks for sharing.
good video matthias,very helpful.
i used to use the "married cleat system"...i'd lend my wife a philips screwdriver and never see it again...very inefficient.
I'm a big fan of the "too many cleats not enough brains" system. I buy a set of bits, use one, set it on top of the fridge while getting a snack, lose all memory of doing so, spend four weeks looking for it, eventually buy another set because they don't come in single bits, and finally find it again when the cat gets up on the fridge and knocks it into my dinner.
percy thrillington I'm thrilled that she was an only child. My Brothers In Law don't mess with mere bits, they take the bit set, battery powered drill, charger, extra batteries, standing drill press, and the coolest shop radio, THEN it all disappears.
Percy, it's in the garden. She was using it as a seed drill, then the phone rang.
I recently arranged my tool cabinet. The first time, I hot glued everything and the first hot day (in Georgia) it all fell off and it stayed that way for 15 years. I finally got tired of not finding tools and made a mini-french-cleat system for part of it. I wish I hadn't done that now. For the rest of it, I made custom holders for each one like you did. I like them much better.I did the same thing for all my drill bits and router bits, but made wood blocks with holes for them. I am so pleased with how it turned out.
Making new holders and shelves is one of the best parts of woodworking I find.
It's a good idea, but in our workshops new tools are always added, eliminating some or changing them for others. The french system has the enormous advantage of allowing the relocation of tools in a very easy and fast way.
Thank you for the video. Greetings from Spain.
Once again you have offered a reasoned idea(s) that help me in the constant battle to organize my shop. Many thanks
I like your individual tool holders, in particular, the plane holders. I also like the concept of using French cleats, perhaps for those heavier items, i.e., cabinets, multiple clamp holders, etc... My " Man Cave " will have a combination of both systems once my shiplap boards are up in the very near future. It is all about getting organized...
Thanks,
Bill on the Hill... :-)
I so admire your patience and attention to detail, great video's
Bill
Nice system Matthias, a very good alternative. As always, your videos are well done, good sound quality, easy to understand,and very succinct.
Tip:
When drilling out rivets, start with a small bit at a slight angle that will punch through but not cut the outer profile of the rivet, follow it by a larger bit.
This avoids the drill bit walking off the rivet head into your hand or scratching the case you may want to re purpose.
Don't worry about a few screw holes. Tool storage isn't surgery. You have an excellent storage system and a perfect video!
Love it. I just started setting up my garage and I just screwed in plywood over the drywall into the studs so I can hang what I want when I want. Thanks for posting your vids. Also I am almost done making three twin beds based on your plans I modified a bit here and there to fit our needs. I will take some pictures and send them your way.
Not a french cleat system for organizing hand tools
Matthias Wandel hi bro , where are from , i want i meet you can u give me your contact number or skype viber whatsapp ,iwanna i see your workshop i like it
Matthias Wandel hey
Matthias Wandel كم سعر هذة الورشة
إنها جميلة جداً
Great storage system. I especially like your method of applying water based varnish from a bottle.
This is an awesome storage setup. I just got back from buying 1/2" birch plywood and 1"x8"x8ft maple planks to build a french cleat system but now I'm not so sure after seeing your setup. Thanks for that....
I made a toolboard with an mdf board and then filled it up with as many nails as needed to hold the tools. It's easy and effective, but not nearly as nice as your solution, Matthias. Maybe I'll get the chance to do something like that someday, I would like that. Nice work.
Wow Matthias your shop looks so nice and well lit and organized, I am inspired.
You are very organized Mr Wandel as well as very creative.
I'm 12 I just got my first real shop and I made a French cleat system but what I did to solve my dust and chip issue was I raised my French cleats off the wall. It solves the problem and I think it looks a little better too
Well I'm 50, totally disorganized with shit piled up on random shelves, but I came here to suggest a spaced cleat through which the dust could fall. It made me smile with optimism to know that a 12 year old not only beat me to the suggestion, but actually implemented the solution. Keep it up!
wow, awesome. I like your work and the way you present your videos, 100 stars!
Anyone else light-years away from this level of organization?
oh yeah
Yep I'm still light years away... And its almost 2021!
I could create an entire hobby of setting up the shop. And then make a cutting board with ease. And then sell it all because I lost interest. 😝
I have my clamps standing up in a barrel. Is that what you mean?
Love this. I recently moved and remodeled a garage into an electronics and woodworking workshop, so I'm definitely planning to copy your ideas since I too find pegboards really ugly.
I used to hang tools on the wall but then decided to just keep them all in my big tool boxes instead, I do keep my drill bits out close to my drill press.. All my hand planes are kept in a huge mahogany box just like great grandpa did.. Worked for him for 70+ years.. Nice setup Matthias.. Gary/Hk @ The Wood Shed..
Wonderful wall tools, looks great.
i really love your works.. i'm from Thailand. i hope this video will inspire and make wonderful works. Thanks for your knowledge.
I like french cleats for the "big" stuff and have four or five rows of them in the shop. I'm perfectly fine with hanging panels on them with holders for all the small tools though.
Me too!
Wow thank you for that video! I am going to start working on my garage now. I was going to go peg holes but your system seems so much more functional!
I started with a french cleat wall but got sick of making hanger cleats for each item. So I started making larger "panels" that hold more then one holder and all those cleats just ended up getting covered. Like other comments I've been seeing. I like both systems but each has a purpose that its better suited for. Cleats for big and just panel up for small.
Dude you're a wood working guru! You have given me some great ideas thank you so much
great and practical with no complications system what you have built there. thanks so much
руки из правильного места растут !!! молодец!!!
I like the DiResta speed-up technique. Good job!
Matthias Wandel: Fighting woodworking trends since 2009! ;D
I did something like this in my garage, but I hanged so much crap on it that it eventually fell on me one morning and I was left with tools scattered all over the floor.
*Gearheads be warned, just because you found a really neat way of hanging your 17 pound bearing extractor to the wall, does not mean you should do it!*
HANG !! THE !! CAR !! ON !! THE !! WALL !! TOO !!!
Love the organization system. for the drill bits, have you ever thought of making the drills tilt towards you (angled a little bit away from the wall). it would be more work but you could save on wall space and avoid the clearance issue at 3:54. just a thought. keep up the great ideas
I love organized tools. It makes doing a project take a lot less time. I just simply use a 2 or 3 inch deck screw for things that only require it, like wrenches, but having a wooded holder is ideal.
Everything organized and at hand! Claps!!!
Best idea I've seen in years.
Those are great plane holders! Thanks for the ideas.
I like your system a lot.
Love this . Thank you for sharing. I am currently reclaiming my shop and this helped. There are so very many hand tools to organize. I did get the woodstove in before winter . :) I've watched a lot of vids but this one suits me well. Again, Thank you. Peace
Clean and easy. For getting the drills out a bit easier (especially those underneath) I got the idea of tilting the whole thing just a tiny little bit.
It's a good idea. But it could potentially allow saw dust and chips to get caught in there which was one of the problems Matthias was trying to solve.
Matthias, I'm new to your channel, and enjoy your genius and organization. I find the level of your fastidiousness hilarious! And if you were on a job with me, I would throw you out of a window in fifteen minutes. Keep up the good work. Love the channel.
Lol!
This would work for my summer tools. Summer here, summer there, and summer where I can't find them. Nice shop.
honestly the best solution i´ve seen so far and it´s pretty too! well done :-)
Not sure I'm a huge French cleat advocate either. I like them ok but I really like how you're doing it too. I think it's just personal preference.
The configurability of a cleat system is good for a beginner (like myself) as I'm constantly adding new tools and needing to move things about. Mine have a cam lever on the bottom that locks them rigid.
Now that I’m not a beginner, I can confirm cleats suck
Very nice Matthias! I have been needing to create something like that for a long time.
Turn your drill bits over in the orgnizers...not only can you can see see the size markings on the bits, but more importantly it is much easier on your hands when you go to pull a bit out!
...when you're in-between projects and just want to spend time in the shop.... this is what happens.
I love the plane storage idea... my favorite so far. Gonna steal it, or borrow it for my shop.
The thing that I like about the french cleat system is that you can move them around and take a set off the wall and to the work site.
Five years later; I usually would go for the
tang of a file or a reamer to remove a rivet,
instead of a drill, even if the hole is that tiny.
There's not that much metal to remove and
like the video shows, a high speed drill slips
and you can actually hurt yourself that way!
Thanks so much for the content, keep up the
good work. בס״ד
i really never do any wood work, but i really like your channel content
Great looking bench.
My next shop task is a tool wall storage system. I was TOTALLY sold on a French cleat system until I saw this video. Thanks for posting Matthias. Alistair
Just get a 4x8 foot custom neodymium magnet and you can just toss the tools to the wall and let them stick! Just need like $2,000 for that custom magnet and devise a way to stop any metals filling from getting ripped out of your mouth. :-)
Even though I'm reading your comment in 2017, you definitely won the internet today. I laughed loudly out and chuckled and chortled. Thanks for the giggles.
😂
Man That is a well set up workshop
Love the brackets you made for the hand planes, could you show more on how they were made? I made a inclined till for the larger planes but would like to make something like those for the block planes.
This is a far inferior passive dust collection system to French cleats.
Screw a bucket to the wall. Problem solved.
Well that's a darn site neater than my system which mostly involves just nails and screws to hold my tools on the wall. Bit of a mish mash but it has a rustic charm, at least that's my story.
Du bon travail. Bravo Matthias
I love your videos. I want to make one of these, but a mobile version with the entire thing on casters, so I can store it in a different place from where I use it.
Some of us aren't satisfied with it staying the same forever and ever... That is the only reason I went with a french cleat system. Albeit it's more a double cleat system: Ran the boards thru a 3 1/8" fence with the saw at 45* angle and then flipped it so there is a cleat on both top and bottom. Spaced them so leftovers can slide between them on the wall so more options for mounting are opened up...
Love yer work but a lot of us are redo-ing our work environment often enough to warrant a french cleat (I feel I have to defend it since I just spent 3 days cutting / mounting / painting mine!)
Lovely and so organised.
Fun stuff. I like it, because it represents a sense of order. Personally, I have a thing about keeping stuff out of sight. Not necessarily for reasons of theft either. Just a personal quirk. I like the little holders. I have a few of them as well, but they're inside a hanging tool cabinet. See *quirk* above.
Yeah I got annoyed with my drills in the box too and set them up the same way, it's really great. Can see what's missing, easy access and no more broken bits from closing or opening the box wrong.
Bonjour Matthias et merci pour ta video.
C'est un atelier d'enfer que tu as là.
Un posto per ogni cosa e ogni cosa al suo posto, perfetto!
love the plane handles!
AWESOME Job Matt...
I like the french cleat its very easy to level the wall mount. After its level the rest will fall into place.
Great video's Mathias! I miss Waterloo ....used to go to school there in the 80's.
The worst thing you can do is to place racks or shelving for storing tools. I like your system and others similar to it. I have to figure out how to get started given the quagmire which I created.
Matthias, In this project you talked about the length of time you left the project cure. When provided, I find the length of time very helpful and interesting. Could you expand on three way ratio between volume of glue used : curing time : strength or durability.
beautiful job, congratulations
Impresive Wandel!
very nice set up
Matthias that’s great. I like this way of organizing tools... But those aren’t Forstner bits that you had mentioned but brad point drills
I like to make changes as needed so I think the French cleats are my go to...
Personally, I still prefer the french cleats.. like you say, this is more work and reqs a bit more planning up front.. as I you swap in and out additional tools, another fixture needs to be created..
possibly a good idea against the debris getting into the cleat would be a filler strip?
Then you have to deal with pulling the whole hanger off the wall, plus how much further off the wall all the hangers are.
I have gone through all your comments, my suggestion is just insert 3 to 4 mm washer between the fixed portion of the cleat and the Plywood/wall, so that a gap will form, whenever the saw dust falls on the cleat , it will automatically come down from the gap created by the washer. The issue of saw dust is solved.......
Amazing Organization!
A place for everything, and everything in its place.
Very nice workshop
Very logical approach
Excellent tool wall/ storage system
hes a special man that Matthias is
Excellent work, always godd idéas.
You are a member of the best of vidéos
very good congratulations all your work
Very nice. Strange looking forstner bits though.
looks really nice!
to keep the bits from tilting, may be just take a piece of thermopore and insert into the holder with properly drilled holes for all the bits...
That's pretty great. Just let me borrow your patience and I'll get started.
Greetings from Ukraine. Dear Matthias, thank you for the detailed review of your workplace. Please tell me how to work with a metal triangle?
You're on the way. Now make a rolling cart to hold your most used hand tools to have them within reach wherever you are in the shop. Some of your tool holders can use some tweaking to make them hold the tools so you can grab the tools easily.