Plastic to plastic screw holes and too high torque = stripped thread. No need to group cables together and this is highlighted by iRepairs problem getting the clam shell to stay together prior to screwing. Best to keep them separate and low profile to avoid crushing and stress on the screw holes. Simply no need to "group" cables. Seems your sell links are D.E.D but thanks for the video all the same, I learned a lot from you.
Without charger it won't start. And with charger it makes only the turn on sound no led's or something. I build in a new logicboard from you. Do i have to remove the rubber under the logic board? Pls help
I have a solid orange battery light in mine when I plug the charger in and press the power button. there is no light anywhere if I don't press the button. can someone tell me what that is please?
I had purchased a smart balance wheel a few days ago it was working great, and now the light where the power button is on, and there is no power to that wheel not registering or nothing, any help would be great! Will post a video if not understanding I apologize
Hi, I'm looking for a jkl-phc02-b-v02 board that activates switches of forward and reverse (uses two, one at left and one at right side)... thanks in advance 😊
Hi Prak, thank you so much for the video. You don't know how much it is appreciated sir! Now I know what's wrong with my board. Do you sell these logic boards? Where can I get one? Willing to pay any (affordable) price! Thanks a lot
Hey hoverboard one side won't work but there's one piece that I didn't see you work one all the wires are attached on mine expect one and the battery is fine I can't seem to find or see where to plug in the one thing
Hello good afternoon, you can repair the control board because when i connect to the charger the charger ligth turns off. I already checked with the battery and it's good.
my Hoverboard has the battery light green and that side pedal is working with its LED light, but the other side has solid red light and the pedal on this side is not working neither the LED light. any advice. tried reset didn't work
Hi recently bought one, however one of the charging port pin is broken and unable to charge. Port was removed, it has 3 pins but 2 wires connected, black and red. By chance do u know where I can locate one online, all I am seeing is the 3pins, 3 wires connected and what's it called. Thank u
I got my swagway on November 18th. On Saturday, the 21st, I crashed mine pretty bad. The right side of the board turned all the way in a full rotation. It worked for a little bit after that but then it shut off eventually. I charged it for like 2 hours and nothing happened. It just won't power on. I later opened up the left side and a little metal bar popped out and I put it back in the center and then the right side was fixed. But it still won't turn on. I'm afraid to do exactly what yu do. Is there another solution for this?
1. The light that shows my battery life is not working. I believe it is because one of the wires is unattached from its connector. Is there anywhere where I can buy this cable that attaches to this? 2. Also my headlight when I plug it back in stays on, even though my board is turned off. It is also dimmer than my other light when it is turned on. Do you know why this is? Thanks for any help!
Hi. I have one of these which spoilt after a day. It doesn't turn on when I press the power button. When I plug it in to charge, the green light on the board and charger flashes. Is the board the problem?
Would it matter if I'm missing a screw on one of the transistor things that hold in the logic board? Cause I'm missing a few screws there, so could that be the problem?
I have a similar problem. Mine turns on but the balance light stays red so i cant ride it. I tried recalibrating it multiple times but that doesn't seem like the problem. If anyone knows how to fix it please tell me. :)
My hoverboard has a problem where I tried to fix the Bluetooth and it stopped working where it would take about 20 seconds to turn on and then would not work then eventually I tried replacing the capacitor and when I plugged the battery in it would just spark at the connector when I had it barely touching and then it would turn on briefly for about 1 second then shut off when it was all the way connected to the battery is this the battery or the motherboard Best regards, Joesh Gray
hi looking to buy a part from you but im unsure if i need a new board or battery. had mine for a day it has two red boards on each side but doesnt have a large one like this video! the battery was getting low so i charged it for 2 hours and then i unplugged it .when i go to turn it on it lights up red on both indicators and then shuts off ! it says its fully charged but it wont work.
Hello, when you removed the logic board why did you remove each screw from the transistors? Why didn't you just unscrew the 4 screws on the metal plate below the logic board and remove it all together? Wouldn't that be faster? Thanks
+Sean Burke looking back , leaving the transistors to the heat sync plate, and just removing the 4 screw which fasten the logic board to the frame would be more efficient and safer. I found that our later thanks for the feedback
How to fix water damaged hover board. I mean to say my hover fell into the swimming pool. I just let it dry and after 3 hours I opened it let it for dry now my waiting for suggestion before putting hands on my board
My hover board still works but the left wheel has started making a clinking noise anytime I ride it. It seems like a problem with the axle. Do you think I this is something I'll be able to repair? I appreciate any advise. I'll be back to report on my findings after taking my board apart.
I've been debating whether to put the wires inside or outside the battery casing. If I put them outside the sharp edges of the battery casing might chew up the wires. If I put it inside the wires might deform the battery. Which is better?
my daughter's won't turn off and when I get in it It won't work and it sounds like a parked car running green lights on top are in but side ain't. what could it be so I can order the parts to fix it
Ok so maybe this question has been asked and even answered but i dont feel like searching so, i have a question. I was riding down a hill one day and when i got to the bottom of the hill and stopped, it jus flew out from under my feet. Without me even moving. Im pretty good on it so i know its not lack of experience. But now wen i turn it on the circle LED on top is flashing super fast but in green and neither on the front blue LEDs come on wen i step on it and it wont move. Rip?
+iRepairMD RUclips i took it apart and everything's okay. I think as far as the two things on each side that press in go. But its like its off and the green light on top is blinking so fast its almost constant
Are all chargers compatible with these boards? If I replace the three board set with a new one and use the old charger and battery, will it work together and not blow up? I have some no-name board, it is just called Smart Balance Wheel, no model number, nothing - repair man sad it has burned transistors and so all the boards might need to be replaced because it is cheaper than try to debug it and then maybe discover more and more burned elements. It turns on for a moment and then immediately shuts down, it happened after its center axis broke and was repaired.
Hi I have problem after run few minute it’s suddenly turn off itself and won’t turn on until I put it charger plug then switch on it’s always happen like that can you help me what fault it Thanks
Hello.. I tried to reset my airboard but at one point the red light would not come on instead it would stay green on top just the led on the right side would blink & just the right side work.. The left side had the led on (no blinks) & the left wheels has no sense.. What shall I do pls..
I've been using mine since Feb and i was out of town and when i came back i thing a family dropped it. It didn't beep anymore but still worked. couple days passed and while i was riding it just stopped. Now when i press the power button the power comes on and shuts off in a second. whats wrong with this?
Hey buddy,, question.. So my board was already charged up,, I got on it for like 5 minute. Den had it sitting for like a week.. I was suppose to go to Atlanta so I put it on the charger cus I wanted it to be fully charged for my trip, anyway I went to work that night and forgot to unplug it.. Now it won't cut on.. Any advice..??
I need help with my scooter there was something wrong with the green power signal it turn red and was making a sound . Later it just freez and all the light turn on and it stop working . When i turn it on all the lights are on but it does not funtion . Please help me
Can you please make a video on how to replace the little part where the charger goes inside? Mines got bend and when I tried to unbend it two of the three little things broke off. So now it won't charge.
The opposite side of the power button.I took the wheel off and found out that the wirings where broken a red one and a black wording was broke?Do I just buy a wheel
My hoverboard every time I turn it on I will be holding the button down and it will be beeping beep beep beep beep beep then it'll make a the speakers will turn on then when I let go of the button it stops beeping and it won't charge
Do these parts work for the 10 in. scooters as well? My issue is that the scooter turns off while riding with full charge.This happened a couple of times and it won't power on for 15 to 20 min. There are times that it wont turn on until I connect it to the charger. Could this be a battery problem?
Normally battery is 36v 4.0ah Your battery maybe is 2.2ah. Just change a new battery. If your Airboard is double system.you can fix two battery. Rang will be longer than normal
When unplugging the power connection and replacing the gyro sensors, the power connector kinda sparks a bit. Is this normal? I don't think it should do that?.
Been working on electric scooters for 8 years and imagine how it is having to explain that in front of a customer 😳😅 yes its completely normal happens all the time
when I bridge the connection on the on and off thing it does turns on and off.. is there a simple way to fix that without having to replace the whole motherboard?
Its not hard to test the fets. Use a multimeter and check continuity from + power rail to each leg. If its shorted its blown. U can also check resistance. I think they should test around 5 or 8 ohm. Nowas for replacing them… its not that difficult teally just be sure to have a solder sucker and som wik as well as quality solder and iron. You can get them hot as hell without damaging them. First one i did took a long time to get out. And it got hot hot. It worked fine after as well as the surrounding components.
Hi i have seen your tutorial on youtube regarding logic board replacement, on mine wen u connect the screwdriver on the power connection nothing happens, but when i connect my charger it turns on and chargers and ont the actual logic board there is a led flashing but when u take charger out it turns off any advice please
help...powers on blue lights show up when stepping on board but that's it...it just won't go...no red lights..but also no second green light..help please!
Please can anyone help me My 14inches one wheel electric scrooter having a power problem If turn on It cult off power immediately with beebing noise Guys any tips for help fix the problem? Need help.
Yes, the reason is a Chinese built POS that could care less about you as long as the CEO makes tons of money. Ours is going to the dump and we're getting ripstick instead
+emeka anekwe hey i wanted to know if you was willing to giveaway your board or sell it because im interested get back to me if anything i collect damage boards
Bought a Hoover Board from Keystone Wizard April 2016, It stop working so I sent it back to them and no one was there to accept the UPS shipping so UPS left them a note to come and pick it up No one did,so I had to pay extra for the to extended the shipping. Call many time no one answered the phone. Very unhappy Grandson and Grandpa not happy.
If you have a red flashing light on one side and it wont move and Recalibrate doesn't fix it... Check all plugs and wires are getting good connection (Especially the 5 wire sockets). If they are and it still don't move then it probly has a blown output fet on the side thats red. They're easy to change.. MAKE SURE BATTERY IS UNPLUGGED!! Measure the Mosfets, 6 on a heatsink per side(GDS)... Usually only 1 or 2 short... DMM to Diode, Neg on Center pin (Drain), Gate approx +1.5v, Source approx .5v. YST7575C crosses to RU6888R 68v 88a TO220 *** For the 12 Fet Mainboard Model, one bank of Fets controls one drive wheel. Do a continuity test to figure out what bank controls what side.. Each bank of Fets, are broken into pairs per thick drive wheel wire (YGB).. Use Different Colored Sharpies on the connectors before unplugging...
Hi Good day. Nice video. The price of the spare parts quoted by the website you have posted are way too expensive. Might as well buy a new unit & cannibalize the old unit for parts, ??? Anyway, good tutorial video. Thank you & have a nice day
+Ty Fulmer Hi good day. Sorry I have no idea at all. I, too, would like to know where to get the spare parts at a low price. If the mother board is USD250 then it is not worth it, might as well get a new unit & cannibalize the old unit for parts for sale. If you have a smart wheel with malfunction motherboard, you should contact your seller. Thank you & have a nice day
+putianren hi I have another question. If I don't have all those screws in around the logic board, could that cause problems? Like could that be why mines not turning on? Because around the logic board, the screws that hold it down are in, except for 2. There are 2 missing
+Ty Fulmer Hi Good day What?? I really have no answer to missing screws, LOL. Really, this is something new to me, LOL. Your answer is as good as mine. OK, maybe it could be, sometime, the assembler could be lazy or forgetful & left out the the missing screws. When you open the casing & if there are no extra screws falling out, then it should not the cause. Thank you & have a nice day
My board fell into a pool and hasn't turned on since then. It turns on only of its plugged to a power source and then it starts blinking red and making noise. I purchased a new logic board but I doubt that's the problem. I need help.
+Chukwuemeka Anekwe mine fell in the pool today too!! and it took like 20 mins to take it out :( idk what to do anyone please help i turned it off the moment i took it out what am i supposed to do now
i live in egypt and i got it from dubai! so i don't really know how i can replace it.. do i need to like go to any electronic place that can change it for me or does it have to be replaced with a battery from another hoverboard
GLVCKY Everything will be broken inn the hover board not just the battery it will also be the motherboard,leds at the front,sensors and all the other circuit if you want you can get the full circuit here www.ebay.com/sch/i.html?_odkw=hoverboard+battery&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xhoverboard+motherboard.TRS0&_nkw=hoverboard+motherboard&_sacat=0 only 53.59$ but the battery doesnt come with that so you can get the battery from here: www.ebay.com/sch/i.html?_odkw=hoverboard+motherboard&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xhoverboard+battery.TRS0&_nkw=hoverboard+battery&_sacat=0 comment me if you dont trust ebay than il give you a few links from amazon or you can search it your self if you want
Hi i know you have a lot of people to respond to but PLEASE just look at mine as it seems im the only one experiencing this: Forget about the segway for now. The actual charger is what i need help with. The LED light on the charger is supposed to light up red when charging, green when charged. Mine just blinks red and green.!! What does this mean
I bought one for my sister , and it doesn't want to move , it kinda just twitches or one wheel starts spinning, also you have to press hard on the left pad to get it to come on any help would be appreciated :)
my board works but the problem is that i charge it for over 2 hours and start riding it and it would just turn off completly wile im riding it. the way i turn it on is plug it in and power it on. it wont hold a charge over 5 min. please help me
mine wouldn't turn on so i changed all the parts except the battery and now the problem is that the battery light doesn't turn on (i replaced that part too) and it doesn't let me charge it and i have tried different chargers and it just won't charge. can you please help?
![Chino Pacas - Modo Capone (with Drake & Fuerza Regida) [Video Oficial]](http://i.ytimg.com/vi/zjv8TQ0gBkg/mqdefault.jpg)
Plastic to plastic screw holes and too high torque = stripped thread. No need to group cables together and this is highlighted by iRepairs problem getting the clam shell to stay together prior to screwing. Best to keep them separate and low profile to avoid crushing and stress on the screw holes. Simply no need to "group" cables.
Seems your sell links are D.E.D but thanks for the video all the same, I learned a lot from you.
The best was when the kids in background said "good daddy, go daddy" very cool
Thank you this was the only helpful video I could find
Awesome video! 7:00 these are MOSFET , 23:18 u were unscrewing it! LOL
What are those tiny battery thing called like the ones saughterd in because one of mine exploded and I want to buy another one please help
Without charger it won't start. And with charger it makes only the turn on sound no led's or something.
I build in a new logicboard from you. Do i have to remove the rubber under the logic board?
Pls help
I have a solid orange battery light in mine when I plug the charger in and press the power button. there is no light anywhere if I don't press the button. can someone tell me what that is please?
I had purchased a smart balance wheel a few days ago it was working great, and now the light where the power button is on, and there is no power to that wheel not registering or nothing, any help would be great! Will post a video if not understanding I apologize
Hi, I'm looking for a jkl-phc02-b-v02 board that activates switches of forward and reverse (uses two, one at left and one at right side)... thanks in advance 😊
can u fix the led bluetooth hoverboards? and where u located maybe i could bring it to you
Hi Prak, thank you so much for the video. You don't know how much it is appreciated sir! Now I know what's wrong with my board. Do you sell these logic boards? Where can I get one? Willing to pay any (affordable) price! Thanks a lot
thanks for this video. but does this new blue logic board works on a 10inch balance wheel that comes with a red color logic board???????
Hey hoverboard one side won't work but there's one piece that I didn't see you work one all the wires are attached on mine expect one and the battery is fine I can't seem to find or see where to plug in the one thing
Hello sir. Do you have an idea, where can buy a new one mainboard S1-15 SMART BALANCE WHEEL?
My board switch can't be turned off. i to use the remote control in order to make it off. Any idea what to do. thanks for the useful videos.
Hello good afternoon, you can repair the control board because when i connect to the charger the charger ligth turns off. I already checked with the battery and it's good.
my Hoverboard has the battery light green and that side pedal is working with its LED light, but the other side has solid red light and the pedal on this side is not working neither the LED light. any advice. tried reset didn't work
Hi recently bought one, however one of the charging port pin is broken and unable to charge. Port was removed, it has 3 pins but 2 wires connected, black and red. By chance do u know where I can locate one online, all I am seeing is the 3pins, 3 wires connected and what's it called. Thank u
I got my swagway on November 18th. On Saturday, the 21st, I crashed mine pretty bad. The right side of the board turned all the way in a full rotation. It worked for a little bit after that but then it shut off eventually. I charged it for like 2 hours and nothing happened. It just won't power on. I later opened up the left side and a little metal bar popped out and I put it back in the center and then the right side was fixed. But it still won't turn on. I'm afraid to do exactly what yu do. Is there another solution for this?
+Alec Spiro if it is double system,maybe system in right side has problems,it can not charge,may charger no good.
1. The light that shows my battery life is not working. I believe it is because one of the wires is unattached from its connector. Is there anywhere where I can buy this cable that attaches to this?
2. Also my headlight when I plug it back in stays on, even though my board is turned off. It is also dimmer than my other light when it is turned on. Do you know why this is? Thanks for any help!
Looks great FUN! I just got one in gold color. Uploading the unboxing video tonight.
Hi. I have one of these which spoilt after a day. It doesn't turn on when I press the power button. When I plug it in to charge, the green light on the board and charger flashes. Is the board the problem?
yes that board has two brushless controllers. there fets not transisters . one maybe a regulator
Would it matter if I'm missing a screw on one of the transistor things that hold in the logic board? Cause I'm missing a few screws there, so could that be the problem?
Винты применяются для прижима соединения отвода тепла, вместо их применяют пружины.
Hi I had a question my board when I put him to fire than the Greens light the round not when I stand alone on the blue lights for you help me?
I have a similar problem. Mine turns on but the balance light stays red so i cant ride it. I tried recalibrating it multiple times but that doesn't seem like the problem. If anyone knows how to fix it please tell me. :)
Where can I buy the board replaced?
Hey how I know if it's the logic board or sensor
My hoverboard has a problem where I tried to fix the Bluetooth and it stopped working where it would take about 20 seconds to turn on and then would not work then eventually I tried replacing the capacitor and when I plugged the battery in it would just spark at the connector when I had it barely touching and then it would turn on briefly for about 1 second then shut off when it was all the way connected to the battery is this the battery or the motherboard
Best regards,
Joesh Gray
hi myn has a loose circle in the middle is that bad??
Excellent repair video. I noticed, more than one person mentions the high cost of the board. I'll cut right to the chase. How much is the board?
+Kenneth Estep $150
hi looking to buy a part from you but im unsure if i need a new board or battery. had mine for a day it has two red boards on each side but doesnt have a large one like this video! the battery was getting low so i charged it for 2 hours and then i unplugged it .when i go to turn it on it lights up red on both indicators and then shuts off ! it says its fully charged but it wont work.
It sounds like You need a new logic board
Your board is double system
red board is not good.
Suggest you can buy green or blue board
Need the web site to order hoover board parts
Hello, when you removed the logic board why did you remove each screw from the transistors? Why didn't you just unscrew the 4 screws on the metal plate below the logic board and remove it all together? Wouldn't that be faster? Thanks
+Sean Burke looking back , leaving the transistors to the heat sync plate, and just removing the 4 screw which fasten the logic board to the frame would be more efficient and safer.
I found that our later thanks for the feedback
You are right it even makes video longer
How to fix water damaged hover board. I mean to say my hover fell into the swimming pool. I just let it dry and after 3 hours I opened it let it for dry now my waiting for suggestion before putting hands on my board
can you make a video on how to fix hoverboard that turns off while riding it
can i buy the foulty motherboards from you ? thank you
My hover board still works but the left wheel has started making a clinking noise anytime I ride it. It seems like a problem with the axle. Do you think I this is something I'll be able to repair? I appreciate any advise. I'll be back to report on my findings after taking my board apart.
Доктор, Мы его будем лечить или пусть жывёт?
I've been debating whether to put the wires inside or outside the battery casing. If I put them outside the sharp edges of the battery casing might chew up the wires. If I put it inside the wires might deform the battery. Which is better?
Шура! Пилите гири они золотые.
think u for helping me fix my hoverBoard.
Thanks for the tutorial. its very helpful.
my daughter's won't turn off and when I get in it It won't work and it sounds like a parked car running green lights on top are in but side ain't. what could it be so I can order the parts to fix it
Ok so maybe this question has been asked and even answered but i dont feel like searching so, i have a question. I was riding down a hill one day and when i got to the bottom of the hill and stopped, it jus flew out from under my feet. Without me even moving. Im pretty good on it so i know its not lack of experience. But now wen i turn it on the circle LED on top is flashing super fast but in green and neither on the front blue LEDs come on wen i step on it and it wont move. Rip?
+mrthugie1 sounds like your balance sensor are stuck in the down position causing the sensor to send a false reading to the motor,
+iRepairMD RUclips i took it apart and everything's okay. I think as far as the two things on each side that press in go. But its like its off and the green light on top is blinking so fast its almost constant
my hoverboard turns on lights will work and it charges but wheels won't move wen you step on
Are all chargers compatible with these boards? If I replace the three board set with a new one and use the old charger and battery, will it work together and not blow up?
I have some no-name board, it is just called Smart Balance Wheel, no model number, nothing - repair man sad it has burned transistors and so all the boards might need to be replaced because it is cheaper than try to debug it and then maybe discover more and more burned elements. It turns on for a moment and then immediately shuts down, it happened after its center axis broke and was repaired.
Шура! Пилите гири они золотые.
Hi I have problem after run few minute it’s suddenly turn off itself and won’t turn on until I put it charger plug then switch on it’s always happen like that can you help me what fault it
Thanks
where can i get the bored from and other parts
+demk818 shop.digitallifex.com/products
what to i do on the top one light does not work and that same side the wheel doesn't work
hi guys got a question why my balance board won't run the lights work but won't run can u guys help me thanks.
smart balance wheel mother(main) pc bored is shot circuit power.i want to know what is the problam
I have an issue with mine where it turns on but the balance sensor won't turn green so I have no way of getting it going
Hello.. I tried to reset my airboard but at one point the red light would not come on instead it would stay green on top just the led on the right side would blink & just the right side work.. The left side had the led on (no blinks) & the left wheels has no sense.. What shall I do pls..
I've been using mine since Feb and i was out of town and when i came back i thing a family dropped it. It didn't beep anymore but still worked. couple days passed and while i was riding it just stopped. Now when i press the power button the power comes on and shuts off in a second. whats wrong with this?
my logic board is different from your. what should i do?
Hey buddy,, question.. So my board was already charged up,, I got on it for like 5 minute. Den had it sitting for like a week.. I was suppose to go to Atlanta so I put it on the charger cus I wanted it to be fully charged for my trip, anyway I went to work that night and forgot to unplug it.. Now it won't cut on.. Any advice..??
Возможно вздутие элементов от не контролированого BMS перезаряда.
I replaced the charge port but now it sparks when I try to charge it and it won't charge. Any idea what the problem could be?
I need information where can I send smart balance board for repair
I need help with my scooter there was something wrong with the green power signal it turn red and was making a sound . Later it just freez and all the light turn on and it stop working . When i turn it on all the lights are on but it does not funtion . Please help me
My hover never charged. the charger keeps the red light blinking and doesn´t charges the hover. what coulb be?
Where can I purchase the logic bored from ? Please let me know ASAP. Thank you
+zehab rebellyus shop.digitallifex.com/products
Can you please make a video on how to replace the little part where the charger goes inside?
Mines got bend and when I tried to unbend it two of the three little things broke off. So now it won't charge.
+Luis030795 see my most recent building the board from spare parts video it shows you how to do just that.
how much do you charge if I send you a swegway to fix it bc one well spins and the other well doesn't spin
how can i buy logic board]
I got a flashing red light on the logic board. Led stays on but doesn't operte
The opposite side of the power button.I took the wheel off and found out that the wirings where broken a red one and a black wording was broke?Do I just buy a wheel
My hoverboard every time I turn it on I will be holding the button down and it will be beeping beep beep beep beep beep then it'll make a the speakers will turn on then when I let go of the button it stops beeping and it won't charge
can you help me how to connect Arduino with hoover board wiring diagram and code for Arduino for speed control
Good job
Do these parts work for the 10 in. scooters as well? My issue is that the scooter turns off while riding with full charge.This happened a couple of times and it won't power on for 15 to 20 min. There are times that it wont turn on until I connect it to the charger. Could this be a battery problem?
+Jose Quijano did you find a solutiuon to this??
Normally battery is 36v 4.0ah Your battery maybe is 2.2ah. Just change a new battery.
If your Airboard is double system.you can fix two battery. Rang will be longer than normal
Hi, my hoverboard worked for 2 days and stopped working.
It stays with all the lights on at the same time, but the motor doesn`t turn on.
Any idea?
When unplugging the power connection and replacing the gyro sensors, the power connector kinda sparks a bit. Is this normal? I don't think it should do that?.
Been working on electric scooters for 8 years and imagine how it is having to explain that in front of a customer 😳😅 yes its completely normal happens all the time
Linda pregunta le haces a un señor que se dedica a cambiar piezas enteras, solo aprendio a sacar y poner tornillos...
when I bridge the connection on the on and off thing it does turns on and off.. is there a simple way to fix that without having to replace the whole motherboard?
Its not hard to test the fets. Use a multimeter and check continuity from + power rail to each leg. If its shorted its blown. U can also check resistance. I think they should test around 5 or 8 ohm. Nowas for replacing them… its not that difficult teally just be sure to have a solder sucker and som wik as well as quality solder and iron. You can get them hot as hell without damaging them. First one i did took a long time to get out. And it got hot hot. It worked fine after as well as the surrounding components.
Hi i have seen your tutorial on youtube regarding logic board replacement, on mine wen u connect the screwdriver on the power connection nothing happens, but when i connect my charger it turns on and chargers and ont the actual logic board there is a led flashing but when u take charger out it turns off any advice please
open it up and make sure all the wires are connected, something similar happened to me and i found a wire was disconnected
hey i did and seems all connected
+Naeem Patel it could be a blown capacitor, could be a battery issue, or could be the logic board...sorry i couldnt help more
I have a problem with mine one wheel work and the other doesn't how can I fix it?
I have a 10 inch self balance electric scooter. it keeps cutting off please help
Thank you so much
Hello my brothers self balancing scooter wheel will not turn around or move forward what is the solution were do I take it to
+Naomi Digwe digitallifex.com/
help...powers on blue lights show up when stepping on board but that's it...it just won't go...no red lights..but also no second green light..help please!
Please can anyone help me
My 14inches one wheel electric scrooter having a power problem
If turn on It cult off power immediately with beebing noise
Guys any tips for help fix the problem? Need help.
Hi every time I turn on my Segway the light blinks then instantly turns off ! Does anyone know how to fix?
Hi sir HY 1908 mosput enqlet Nomber??
OK gotta question, my daughter bought her one and she rode it once, now it won't turn off unless I disco the battery, any idea's?
Same here,,,,,but what's the problem with this ?what causes this????any body knows why??
Yes try putting it in a bucket of water overnight. Dry it out and then power up
Yes, the reason is a Chinese built POS that could care less about you as long as the CEO makes tons of money. Ours is going to the dump and we're getting ripstick instead
Mine fell into a pool so does that mean that the logic board is faulty
+emeka anekwe hey i wanted to know if you was willing to giveaway your board or sell it because im interested get back to me if anything i collect damage boards
my hoverdroed has a problem when i on this it speak but it did not start what i do now?
Bought a Hoover Board from Keystone Wizard April 2016, It stop working so I sent it back to them and no one was there to accept the UPS shipping so UPS left them a note to come and pick it up No one did,so I had to pay extra for the to extended the shipping. Call many time no one answered the phone. Very unhappy Grandson and Grandpa not happy.
What do I do if the light does turn on when I bridge it?
please help me to fox my balance wheel , right wheel of my balae wheel is not working.. pleaseeee
If you have a red flashing light on one side and it wont move and Recalibrate doesn't fix it... Check all plugs and wires are getting good connection (Especially the 5 wire sockets). If they are and it still don't move then it probly has a blown output fet on the side thats red. They're easy to change.. MAKE SURE BATTERY IS UNPLUGGED!! Measure the Mosfets, 6 on a heatsink per side(GDS)... Usually only 1 or 2 short... DMM to Diode, Neg on Center pin (Drain), Gate approx +1.5v, Source approx .5v. YST7575C crosses to RU6888R 68v 88a TO220 *** For the 12 Fet Mainboard Model, one bank of Fets controls one drive wheel. Do a continuity test to figure out what bank controls what side.. Each bank of Fets, are broken into pairs per thick drive wheel wire (YGB).. Use Different Colored Sharpies on the connectors before unplugging...
Hi
Good day.
Nice video.
The price of the spare parts quoted by the website you have posted are way too expensive.
Might as well buy a new unit & cannibalize the old unit for parts, ???
Anyway, good tutorial video.
Thank you & have a nice day
Anywhere I could buy one cheaper?
I mean the logic board
+Ty Fulmer
Hi
good day.
Sorry I have no idea at all.
I, too, would like to know where to get the spare parts at a low price.
If the mother board is USD250 then it is not worth it, might as well get a new unit & cannibalize the old unit for parts for sale.
If you have a smart wheel with malfunction motherboard, you should contact your seller.
Thank you & have a nice day
+putianren hi I have another question. If I don't have all those screws in around the logic board, could that cause problems? Like could that be why mines not turning on? Because around the logic board, the screws that hold it down are in, except for 2. There are 2 missing
+Ty Fulmer
Hi
Good day
What??
I really have no answer to missing screws, LOL.
Really, this is something new to me, LOL.
Your answer is as good as mine.
OK, maybe it could be, sometime, the assembler could be lazy or forgetful & left out the the missing screws.
When you open the casing & if there are no extra screws falling out, then it should not the cause.
Thank you & have a nice day
My board fell into a pool and hasn't turned on since then. It turns on only of its plugged to a power source and then it starts blinking red and making noise. I purchased a new logic board but I doubt that's the problem. I need help.
+Chukwuemeka Anekwe mine fell in the pool today too!! and it took like 20 mins to take it out :( idk what to do anyone please help i turned it off the moment i took it out what am i supposed to do now
Careful your battery is dead and needs to be replaced attempting to charge the battery could explode it so don't plug it in
where do i replace it from? Tom dilly
i live in egypt and i got it from dubai! so i don't really know how i can replace it.. do i need to like go to any electronic place that can change it for me or does it have to be replaced with a battery from another hoverboard
GLVCKY
Everything will be broken inn the hover board not just the battery it will also be the motherboard,leds at the front,sensors and all the other circuit if you want you can get the full circuit here www.ebay.com/sch/i.html?_odkw=hoverboard+battery&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xhoverboard+motherboard.TRS0&_nkw=hoverboard+motherboard&_sacat=0 only 53.59$ but the battery doesnt come with that so you can get the battery from here: www.ebay.com/sch/i.html?_odkw=hoverboard+motherboard&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xhoverboard+battery.TRS0&_nkw=hoverboard+battery&_sacat=0 comment me if you dont trust ebay than il give you a few links from amazon or you can search it your self if you want
Hi i know you have a lot of people to respond to but PLEASE just look at mine as it seems im the only one experiencing this:
Forget about the segway for now. The actual charger is what i need help with. The LED light on the charger is supposed to light up red when charging, green when charged. Mine just blinks red and green.!! What does this mean
В режиме перегрузки по току.
Saya mempunyai sebuah masalah yang sama,,,apakah tidak bisa di perbaiki atau perlu ganti peralatan yang perlu di ganti?terimakasih
I bought one for my sister , and it doesn't want to move , it kinda just twitches or one wheel starts spinning, also you have to press hard on the left pad to get it to come on
any help would be appreciated :)
Так нагрузи сестру весом!
Help mine won't stop beeping when I turn it on the dot just stays red and beeps please help me I even tried recalibrating it won't work
amigo no entiendo ingles y no encuentro otro video q me ayude a reparar mi patineta y no prende solo con el cargador y prende la bateria naranja
my board works but the problem is that i charge it for over 2 hours and start riding it and it would just turn off completly wile im riding it. the way i turn it on is plug it in and power it on. it wont hold a charge over 5 min. please help me
Hello!
What if my hoverboard is full charged but when i get on top of it , it just turn off. Why? Help me please
Same what was the problem
battwry buy a new one
Can you help me with my board please
mine wouldn't turn on so i changed all the parts except the battery and now the problem is that the battery light doesn't turn on (i replaced that part too) and it doesn't let me charge it and i have tried different chargers and it just won't charge. can you please help?
You have a bad charger