Hey brother. I just want to say a thank you. This is probably one of the very best videos that I have ever seen on RUclips to date. Totally got it now.
This video is great! The EF hutten reference made me laugh becasue i am old enough to remember the commercials. You really made a lot of sense for this board that I was struggling with because I dont stay on it daily
You made my day! I do offer one on one training if you want to dig deeper. My website is down at this moment,but it should be up in a hour or two. danatucker.com.
Blessings Dana. I've been looking for an explanation of the blue button below the slider when we are working on a channel on a mix bus. They show up around 23:55 when you are talking about IEM mix. Appreciate any light you can shed on this. Oh, and thanks for the all the help you provide with your videos.
That is the "Power Button". If you turn it off by clicking it, then you can not add that channel or input to your monitors. It does not hurt anything by leaving them on.
Dana, your video cleared up a whole lot, thanks much for taking the time to make and post this! It is more helpful than all the other videos I have saved combined, that is no exaggeration. I am going to search for other videos that you may have posted, I want to better understand how to set up in-ear monitors for band members....I will mess around with the board to see if I can customize what I hear through the normal headphone jack using the technique that you taught and that might help me figure that out. And routing....still messes with my mind but the part of your video on the routing section (at 20:12) might set me in the right direction to understand it better. Again, thanks much, brother!
Your very welcome! I have a playlist with over 60 videos concerning the X32 and X32 Edit here. ruclips.net/video/sQTlY0AziTA/видео.html and I also offer one on one training here. danatucker.com
I got a Behringer x32 Compact a month or so ago, and it is Intimidating. I'm using it for future live streaming and with the help of a friend I met through Discord that does audio, I am finally set up... This video is great, and makes me think of a hundred questions... But the straight forward dealing with the basics is better than all of the other channels with 50-300k subs. Also, all, future videos should just randomly refer to "Joe". Joe is now an off camera, never talking 3rd person on the channel. Great stuff! I might pop back in here with questions!
Thanks for the kind words. What you call "Joe", the pros call "Talking Heads" ;-). If you want to speed up your learning curve, I do one on one training at danatucker.com
Dana, thanks for your videos. I have a basic question I want to ask about x32-edit routing. I can't hear any of my incoming channels on my mac. I can see the signal on the meters. When I'm in my DAW (Logic) I can hear them if I arm the track for recording. But I can't hear anything unless my DAW is open. How can I get my channels so I can hear them through my computer speakers?
Just so you know, I am not a Mac or Logic user, but I have the same issues with Windows 10 and Reaper. The card routing in the X32 is setup for professional recording, without any added effects. The signal path is Input > Pre-amp > Card Out. If you use external speakers for your computer, then you can get a 1/8th to 1/4 stereo adapter and just come out of the headphone jack on the rack. Set the monitor output to AFL and you can now hear any of the internal effects you have added in the rack.
Great video Dana, at 27:50 you nailed an AUX question I was seeking an answer to. Now I know how to add a gate and channel function to my AUX ins. Thanks so much! ~D
Hey Dana, thanks for this buddy. Super helpful. Can I make a small suggestion. I noticed in one of your other vids you mentioned you use Camtasia to do your vids. Because of the speed that you move your mouse around, it can be difficult for the viewer to see where your are on the screen (it will probably be newbies watching so they won't be familiar with the layout skin so they'll be lost most of the time). Can I suggest you use the Cursor effect on Camtasia. Easy to use, just go to your effects on the left, select the Cursor Effects option, then drag that effect over your final video track before exporting. You can set the colour and intensity/transparency on the right. Will certainly make the presentations easier to follow. Most of us wathcing will be males and everyone knows we can only do one thing at a time. We can either listen to what you're saying, or trying and find where your mouse is on the screen. We can't do both at the same time. 😄. Only a suggestion mate, finding your channel very helpful.
Believe it or not, you are about the 100th person to suggest that. I did switch over and started user cursor effects right after I made my first few videos. Everything is a learning curve. ;-)
Dana I am a x32 rack user and I am having major issues. So what I have is the x32 rack running with the Dante card and the SD16 Stage box. My delima is that I want to mutitrack and stream my church service live. I have my multitrack system on one side of the sancuary with a dVS license and on my main Vmix machine I have another DVS license. I have everything routed but when I go to the routing I get lost. I am using inputs 1-16 on the rack and 1-16 inputs on the stage box AES50. I am using 4 outputs on the stagebox for IEMS and for my outputs on the x32 im using outputs 3 for stage monitors and output 4 for a subwoofer on the rack. I am using Busmix 1and 2 for my livestream into Vmix but, when I try to multitrack with my laptop I get all of my channels coming in weather I want to here just 1 mic it comes over all channels. What am I doing wrong? I guess I am getting confussed about the outputs and inputs.
Good afternoon. Please go to my contact page and upload your scene. I can then check your routing and get back to you. That is where we need to start first. danatucker.com/contact/
Hi Dana, great videos I have learned a lot from them. I’m having trouble finding how to use a talkback mic with the x32 edit S/W. I run this from a Laptop at FOH. Also, why do you route 7 and 8 (mains) over to Matrix 1 and 2. Thanks
Yes you can and you have a few ways to do it. The first is by using a audio interface which is expensive and unnecessary. The best way is to use the Aux In Remapping feature in Routing. Select "Card In 1 & 2" and then go to channel 1 and under the Config tab, select Aux In 1.
Only if you can split the inputs. You would send one set to FOH and send the other set to the IEMs. ruclips.net/video/xLX_oA8CEUQ/видео.htmlsi=l9QWZ_2YFDGThLKO
I have my fax working on the main left and right outputs but I can’t monitor the fax on my mix busses for some reason? I am getting signal on the fax track but can’t hear it
Go to the Monitor tab and make sure you have AFL, (After Final Listen) selected. If you are talking about hearing the FX in your IEMs, then you need to add them into your monitor buses just like you do for each channel you want to hear.
Dana! I was able to set up my scenes entirely on the app and export it without having to be connected to the unit back at the rehearsal space. Why is this not a feature of the x air edit as well? I'm going to try and do this with an XR18 scene and export it and import it into the XR18 and see if that works.. could be a workflow assist for me
There are certain inputs that will not allow you to assign phantom power to, like the Aux Inputs and Card Inputs. Also, if you have your routing setup incorrectly, the input may not allow the phantom power as well, as it thinks it is not connected.
I figured it out after 5 hrs of frustration. It was the play/record in the routing. I'm not sure why they would toggle the phantom power option off when switching between those. Something so simple. Thanks for the input Dana 👍
Thank you for this overview is there a way to use the DCA Group to also Mute the Channels assigned to it. I clicked on Mute on my DCA and none of the Channels going to it muted but If i pull the fader down then of course all those source volumes go down. But I was under the impression that the DCA could also mute the channels assigned to it somehow. Thanks in advance.
It does. If you have channels 1 through 8 assigned to DCA 1, then if you mute DCA 1, it will mute the outputs of channel 1 through 8. Make sure you do not have these same channels assigned to another DCA or Bus group. If you do, then you would also have to mute those as well.
I am a windows user but I also run a x32 rack users FB group. There have been many complaints about mac users upgrading or installing bigsur and then certain apps not working. You may want to ask your question in a apple support community. Sorry.
Last question, sorry: Can you connect to the mixer and utilize this software with just the USB Audio Interface port on the back? Or do you **need** to connect via wireless router/ethernet?
Great question and I hope it's not your last! ;-) You don't need a router, but you will need to connect a Ethernet cable from the X32 into your computer. That is for running the software. The USB connection is for using the X32 card for multi track recording and playback. When you connect this same setup using a router, you can then use wireless apps so you are not tied to the console.
Don't believe everything you hear! As far as what I think about you buying one, I have no opinion one way or the other. I would suggest you do your own homework and research the best mixer to fit your needs and no one else. Take care.
The presets are already in the X32 under effects I think. You would insert your thumb drive, and export the presets to the thumb drive and then copy them to your computer from the thumb drive.
Hey Dana, awesome tutorial. I am setting up an X32 for my church. I am using stereo bus to group vocals, drums and instruments and I am using Matrix 1 (out15) for MainsL, Matrix 2 (out16) for MainsR and Matrix 3 (out 14) for sub. I am getting sound out of the matrix to my mains and sub but the LR fader is not controlling my overall volume. I think I need to send my busses to the LR fader and then the LR fader goes to the Matrix but I am not sure
Good morning. I am in the process of moving and all of my gear is packed. You can try sending your buses to the mains via the sends tab or screen. I invite you to check out my FB group, X32 Rack Users. All X32s use the same firmware.
@@DanaTucker1 ahh ok. What kind of software? I ran my mic through reaper and tried sending it to x32 edit through midi. I don’t know if that’s even how it’s supposed to be done or not. 😅 I’m using my usb mic so I can practice using effects.
You cant do that. The X32 Edit program is used for controlling X32 series mixers. You also can not send audio files via midi. Can you get your mic to record in Reaper?
I have no idea what you are trying to do. If you are trying to go live, then you need some type of streaming software that will recognize your USB mic.
You would do that by simply renaming the wav file. Just make sure you add the ".wav" extension at the end of the file. If you are talking about renaming the channel, just right click on the scribble strip and name it from there.
Hey brother. I just want to say a thank you. This is probably one of the very best videos that I have ever seen on RUclips to date. Totally got it now.
Glad it was helpful!
This video is great! The EF hutten reference made me laugh becasue i am old enough to remember the commercials. You really made a lot of sense for this board that I was struggling with because I dont stay on it daily
You made my day! I do offer one on one training if you want to dig deeper. My website is down at this moment,but it should be up in a hour or two. danatucker.com.
Blessings Dana. I've been looking for an explanation of the blue button below the slider when we are working on a channel on a mix bus. They show up around 23:55 when you are talking about IEM mix. Appreciate any light you can shed on this. Oh, and thanks for the all the help you provide with your videos.
That is the "Power Button". If you turn it off by clicking it, then you can not add that channel or input to your monitors. It does not hurt anything by leaving them on.
I have struggled learning x32 producer and x32 edit. This Video cleared a lot for me. Thanks
Wow, thanks! Ya made my Day!! Just so you know, I also do one on one hands on training through Zoom. www.danatucker.com
Dana, your video cleared up a whole lot, thanks much for taking the time to make and post this! It is more helpful than all the other videos I have saved combined, that is no exaggeration. I am going to search for other videos that you may have posted, I want to better understand how to set up in-ear monitors for band members....I will mess around with the board to see if I can customize what I hear through the normal headphone jack using the technique that you taught and that might help me figure that out. And routing....still messes with my mind but the part of your video on the routing section (at 20:12) might set me in the right direction to understand it better. Again, thanks much, brother!
Your very welcome! I have a playlist with over 60 videos concerning the X32 and X32 Edit here. ruclips.net/video/sQTlY0AziTA/видео.html and I also offer one on one training here. danatucker.com
Dana you are the man! "It's that simple"! Shout out to Joe
Thanks for the kind words!
I got a Behringer x32 Compact a month or so ago, and it is Intimidating. I'm using it for future live streaming and with the help of a friend I met through Discord that does audio, I am finally set up...
This video is great, and makes me think of a hundred questions... But the straight forward dealing with the basics is better than all of the other channels with 50-300k subs.
Also, all, future videos should just randomly refer to "Joe". Joe is now an off camera, never talking 3rd person on the channel.
Great stuff! I might pop back in here with questions!
Thanks for the kind words. What you call "Joe", the pros call "Talking Heads" ;-). If you want to speed up your learning curve, I do one on one training at danatucker.com
Dana, thanks for your videos. I have a basic question I want to ask about x32-edit routing. I can't hear any of my incoming channels on my mac. I can see the signal on the meters. When I'm in my DAW (Logic) I can hear them if I arm the track for recording. But I can't hear anything unless my DAW is open. How can I get my channels so I can hear them through my computer speakers?
Just so you know, I am not a Mac or Logic user, but I have the same issues with Windows 10 and Reaper. The card routing in the X32 is setup for professional recording, without any added effects. The signal path is Input > Pre-amp > Card Out. If you use external speakers for your computer, then you can get a 1/8th to 1/4 stereo adapter and just come out of the headphone jack on the rack. Set the monitor output to AFL and you can now hear any of the internal effects you have added in the rack.
Great video Dana, at 27:50 you nailed an AUX question I was seeking an answer to. Now I know how to add a gate and channel function to my AUX ins. Thanks so much! ~D
Hey Brother! Glad to help. Your talent is truly amazing!!!!!!!!!!!!!!!!!!!
Hey Dana, thanks for this buddy. Super helpful. Can I make a small suggestion. I noticed in one of your other vids you mentioned you use Camtasia to do your vids. Because of the speed that you move your mouse around, it can be difficult for the viewer to see where your are on the screen (it will probably be newbies watching so they won't be familiar with the layout skin so they'll be lost most of the time). Can I suggest you use the Cursor effect on Camtasia. Easy to use, just go to your effects on the left, select the Cursor Effects option, then drag that effect over your final video track before exporting. You can set the colour and intensity/transparency on the right. Will certainly make the presentations easier to follow. Most of us wathcing will be males and everyone knows we can only do one thing at a time. We can either listen to what you're saying, or trying and find where your mouse is on the screen. We can't do both at the same time. 😄. Only a suggestion mate, finding your channel very helpful.
Believe it or not, you are about the 100th person to suggest that. I did switch over and started user cursor effects right after I made my first few videos. Everything is a learning curve. ;-)
Dana I am a x32 rack user and I am having major issues. So what I have is the x32 rack running with the Dante card and the SD16 Stage box. My delima is that I want to mutitrack and stream my church service live. I have my multitrack system on one side of the sancuary with a dVS license and on my main Vmix machine I have another DVS license. I have everything routed but when I go to the routing I get lost. I am using inputs 1-16 on the rack and 1-16 inputs on the stage box AES50. I am using 4 outputs on the stagebox for IEMS and for my outputs on the x32 im using outputs 3 for stage monitors and output 4 for a subwoofer on the rack. I am using Busmix 1and 2 for my livestream into Vmix but, when I try to multitrack with my laptop I get all of my channels coming in weather I want to here just 1 mic it comes over all channels. What am I doing wrong? I guess I am getting confussed about the outputs and inputs.
Good afternoon. Please go to my contact page and upload your scene. I can then check your routing and get back to you. That is where we need to start first. danatucker.com/contact/
Hi Dana, great videos I have learned a lot from them. I’m having trouble finding how to use a talkback mic with the x32 edit S/W. I run this from a Laptop at FOH. Also, why do you route 7 and 8 (mains) over to Matrix 1 and 2. Thanks
I can't explain this using the comment feature. We can do a zoom call if you like. danatucker.com/talk-with-dana/
Excellent video, as usual. Learned a few things that I didn't know. Thanks.
Glad it was helpful!
Outstanding video
Thank you so much 😀 I am going to try and do a more in-depth video in the near future.
hi dana
can you put music from a computer or PC into channel 1?
Yes you can and you have a few ways to do it. The first is by using a audio interface which is expensive and unnecessary. The best way is to use the Aux In Remapping feature in Routing. Select "Card In 1 & 2" and then go to channel 1 and under the Config tab, select Aux In 1.
where can i find the video where drew explains the matrix out puts for main L/R? great videos mate , best overall explanation on youtube
Thanks. I did not find one Drew did but here is one from Behringer. ruclips.net/video/yec6bmp4DCs/видео.html
Is there a way to get vocal effects in the on ears and not FOH? That way he has full control of his end
Only if you can split the inputs. You would send one set to FOH and send the other set to the IEMs. ruclips.net/video/xLX_oA8CEUQ/видео.htmlsi=l9QWZ_2YFDGThLKO
You're simply the best!
You're the best! I am still working on your question about mic'ing grands. I am on the fifth page. ;-)
I have my fax working on the main left and right outputs but I can’t monitor the fax on my mix busses for some reason? I am getting signal on the fax track but can’t hear it
Go to the Monitor tab and make sure you have AFL, (After Final Listen) selected. If you are talking about hearing the FX in your IEMs, then you need to add them into your monitor buses just like you do for each channel you want to hear.
Dana! I was able to set up my scenes entirely on the app and export it without having to be connected to the unit back at the rehearsal space. Why is this not a feature of the x air edit as well? I'm going to try and do this with an XR18 scene and export it and import it into the XR18 and see if that works.. could be a workflow assist for me
I can't answer that, as I have no experience with the X Air Edit app.
Great video! Only one question: Did Joe know how to download a .zip file??
I have no idea. But if Joe does not know, then I doubt he will know how to use a digital mixer. :-)
Thank you for your clear explanation!
You are welcome!
Im running M32 edit. Why am i not seeing the 48v phantom power button like on your x32 edit? Ive been trying to figure this out for hrs
There are certain inputs that will not allow you to assign phantom power to, like the Aux Inputs and Card Inputs. Also, if you have your routing setup incorrectly, the input may not allow the phantom power as well, as it thinks it is not connected.
I figured it out after 5 hrs of frustration. It was the play/record in the routing. I'm not sure why they would toggle the phantom power option off when switching between those. Something so simple. Thanks for the input Dana 👍
By the way, your name is now Joe.
Ya got me there. I have no idea what y0u mean. ;-)
Thank you for this overview is there a way to use the DCA Group to also Mute the Channels assigned to it. I clicked on Mute on my DCA and none of the Channels going to it muted but If i pull the fader down then of course all those source volumes go down. But I was under the impression that the DCA could also mute the channels assigned to it somehow. Thanks in advance.
It does. If you have channels 1 through 8 assigned to DCA 1, then if you mute DCA 1, it will mute the outputs of channel 1 through 8. Make sure you do not have these same channels assigned to another DCA or Bus group. If you do, then you would also have to mute those as well.
Hi Dana, was wondering if you might be able to figure out how I lost function for 48V Phantom power??? When I have a DL 32 no issues on AES50 B...
I have no idea without looking at your scene.
@@DanaTucker1 aparently initialization after new firmware was the trick
How do you change a channel name/color on the X32 Edit software? I can't for the life of me figure out how to do it.
Place your cursor on the channel number you want to work with and right click. You can name it and change the color there.
I have updated my Mac to Bigsur... and ow the app says "INCOMPATIBLE MIXER FIRMWARE - Please update to th elatest version".
What can I do to fix it?
I am a windows user but I also run a x32 rack users FB group. There have been many complaints about mac users upgrading or installing bigsur and then certain apps not working. You may want to ask your question in a apple support community. Sorry.
Can I run XLR in 1-8 to (XLR) output 1-8 running to FOH, and use the 1/4 aux outs for in ear mixes?
Thanx in advance for your time!
Yes you can!
Hey Dana great videos! Thanks 👍🏽👍🏽👍🏽
You are so welcome!
Last question, sorry: Can you connect to the mixer and utilize this software with just the USB Audio Interface port on the back? Or do you **need** to connect via wireless router/ethernet?
Great question and I hope it's not your last! ;-) You don't need a router, but you will need to connect a Ethernet cable from the X32 into your computer. That is for running the software. The USB connection is for using the X32 card for multi track recording and playback. When you connect this same setup using a router, you can then use wireless apps so you are not tied to the console.
Excellent tutorial! Thank you.
You're very welcome!
would you mind to send me the presets that you send to Joe,Please?
Sure, just send me your email address through my contact form. danatucker.com/contact/
I'm Afraid of Buying a Behringer X32 Rack ... I wonder what you say ... If I don't buy it ... ?????? Everyone Disparages the Device
Don't believe everything you hear! As far as what I think about you buying one, I have no opinion one way or the other. I would suggest you do your own homework and research the best mixer to fit your needs and no one else. Take care.
Where can I download the zip file with the X32 presets you show in the video please?
The presets are already in the X32 under effects I think. You would insert your thumb drive, and export the presets to the thumb drive and then copy them to your computer from the thumb drive.
Hey Dana, awesome tutorial. I am setting up an X32 for my church. I am using stereo bus to group vocals, drums and instruments and I am using Matrix 1 (out15) for MainsL, Matrix 2 (out16) for MainsR and Matrix 3 (out 14) for sub. I am getting sound out of the matrix to my mains and sub but the LR fader is not controlling my overall volume. I think I need to send my busses to the LR fader and then the LR fader goes to the Matrix but I am not sure
Good morning. I am in the process of moving and all of my gear is packed. You can try sending your buses to the mains via the sends tab or screen. I invite you to check out my FB group, X32 Rack Users. All X32s use the same firmware.
Thank you very much ... Sir ..
Your very welcome!
how to get or download those presets
They are inside the mixer. You just need to export them to a thumb drive and copy them to your computer.
Exellent!
Thanks!
I’m new to this, how do I use my usb mic that is going into my pc a mic on a channel?
You have to have a software program to run it into. USB mics are not really recommended for professional work.
@@DanaTucker1 ahh ok. What kind of software? I ran my mic through reaper and tried sending it to x32 edit through midi. I don’t know if that’s even how it’s supposed to be done or not. 😅 I’m using my usb mic so I can practice using effects.
You cant do that. The X32 Edit program is used for controlling X32 series mixers. You also can not send audio files via midi. Can you get your mic to record in Reaper?
@@DanaTucker1 yes. I am able to get my mic to record in reaper. Should I record a clip instead of trying to use the mic live?
I have no idea what you are trying to do. If you are trying to go live, then you need some type of streaming software that will recognize your USB mic.
Thank you!!!!!
You are very welcome!
Be careful with that Stereo Combinator. No how to use it before you try live.
That is very good advice and should be applied to anything you do with audio!
Do all the presets install with the x32 software download?
Yes. Just create a folder on your desktop and copy them from the X32 to the folder via the USB export function.
How do i rename a track
You would do that by simply renaming the wav file. Just make sure you add the ".wav" extension at the end of the file. If you are talking about renaming the channel, just right click on the scribble strip and name it from there.