THANK GOD!!!! Finally someone to slow down and explain to a 70 year old non-Digital brain!!!! Thank you , thank you Harry!! And your example was EXACTLY what I needed.
Hi Harry, is there a way to get a logic switch to activate when you do a double toggle of a spring loaded switch? For example: toggle+toggle = on, and then toggle+toggle = off. My goal is to have a double toggle to emulate the “trim up” condition to engage my turbine. And again a double toggle to emulate a “trim down” condition to turn off the turbine. I can’t get my head around this. Usually I use my protected switch to emulate the “trim up/down” condition, but in this jet I am using this protected switch to turn on /off the receiver via a RSW remote switch. I hate using the trim up/down buttons to activate the turbine. It seems to me a very inelegant way of doing it. As always, very grateful of what you do to help us learn.
Yes. Use the LUA app DFM-SWT and set the 2 press to . Then in a logic switch set both inputs1 and 2 to user applications, SL2 (which is the output from the app of a double press) and set the logical operator as A on B off
Hi Harry, You do very good job with your tutorials ! Thank you, I learned much. I would like to ask you the video the example soy mention about the wheel i like to control nose wheel diferent servo to ruder and when i put throttle 20% the nose wheel shud move less
Hi Harry, You do very good job with your Jeti-clinic !!! Thank you, I learned much. I would like to ask you for How to video about rpm sensor with arduino. I have GP1213 motor and I miss rpm a lot. Thank you and keep posting new videos.
Harry Thank you. I looked at rc-thoughts and I am little bit confused. I have no andruino experience and your way video presentation is very good and I believe, that lot of guys will epreciate your video how-to for rpm sensor. So, some time, I hope, you will create it for us (dummies) :-). Besides this, I highly appreciate your Jeti clinic. So far, the best learning source for Jeti folks ! Miro
Harry, is there a way to contact you directly or otherwise explain how I might program a logic switch to switch flight modes such as from zoom to normal by pitching over…
Use the A On B Off logic switch where input A such as a button press switches it on, and input B is down elevator which switches it off. Use that logic switch as the switch for zoom flight mode. Put zoom mode at the top of the list of flight modes
THANK GOD!!!! Finally someone to slow down and explain to a 70 year old non-Digital brain!!!! Thank you , thank you Harry!! And your example was EXACTLY what I needed.
Hi Harry, is there a way to get a logic switch to activate when you do a double toggle of a spring loaded switch? For example: toggle+toggle = on, and then toggle+toggle = off. My goal is to have a double toggle to emulate the “trim up” condition to engage my turbine. And again a double toggle to emulate a “trim down” condition to turn off the turbine. I can’t get my head around this.
Usually I use my protected switch to emulate the “trim up/down” condition, but in this jet I am using this protected switch to turn on /off the receiver via a RSW remote switch.
I hate using the trim up/down buttons to activate the turbine. It seems to me a very inelegant way of doing it.
As always, very grateful of what you do to help us learn.
Yes. Use the LUA app DFM-SWT and set the 2 press to . Then in a logic switch set both inputs1 and 2 to user applications, SL2 (which is the output from the app of a double press) and set the logical operator as A on B off
@@cotswoldpilot Thank you!! I will try that tonight
Hi Harry, You do very good job with your tutorials ! Thank you, I learned much. I would like to ask you the video the example soy mention about the wheel i like to control nose wheel diferent servo to ruder and when i put throttle 20% the nose wheel shud move less
Hello Mauricio, go to the steering dual rate, use the throttle stick as the switch
Hi Harry, You do very good job with your Jeti-clinic !!! Thank you, I learned much. I would like to ask you for How to video about rpm sensor with arduino. I have GP1213 motor and I miss rpm a lot. Thank you and keep posting new videos.
Hello Miro, the instructions for the rpm sensor are at www.rc-thoughts.com/jeti-cdi-sensor/
Harry
Thank you. I looked at rc-thoughts and I am little bit confused. I have no andruino experience and your way video presentation is very good and I believe, that lot of guys will epreciate your video how-to for rpm sensor. So, some time, I hope, you will create it for us (dummies) :-). Besides this, I highly appreciate your Jeti clinic. So far, the best learning source for Jeti folks ! Miro
Harry, is there a way to contact you directly or otherwise explain how I might program a logic switch to switch flight modes such as from zoom to normal by pitching over…
Use the A On B Off logic switch where input A such as a button press switches it on, and input B is down elevator which switches it off. Use that logic switch as the switch for zoom flight mode. Put zoom mode at the top of the list of flight modes