Thanks, Mike. Yeah, I noticed it when I was rewatching. I also didn’t push the back left side up correctly. I was able to fix that later. Things like this go a lot easier when you don’t have to think about camera angle, lighting, knowing what you’re going to say and if the sound is good. Anyway, thanks again. And appreciate the comment. Have a great evening! 🙏
Just purchased these , i like that they cover the whole corner edge , versus what I had was only to the edge.Also purchaes the rear diffusers like the ones you have ,they look like they are factory installed. I will wait a while for you to see how the clear engine cover will hold for six moths or so. It does make the engine bay come alive. Thanks for all the videos.
Funny you mentioned the Pro Clip. I recently purchased one for my Ridgeline and just ten minutes ago I ordered one for my C6. I've never heard one complaint about the Pro Clip products. Nice add-on for your interior Jason. Well done. Wish I needed some, but I'm already pretty well loaded up on all my interior trim with Carbon Fiber. As to my exterior. Well, I used to be go chrome or go home, but now all the chrome is gone including the wheels and everything is now Carbon Flash including my wheels which haven't been painted, they're powder coated. I love the change. Once again, well done as to your decision to go with Carbon Fiber. Save the Wave 🙋♂ P.S. Does EOS have anything available in Carbon Flash for my antique C6?
Pro Clip is definitely a winner!! The only thing I see is a front splitter in carbon flash for the C6. How have you been feeling. Are you planning to hit any car shows as it warms up?
totally popping out in the corner on the left side. lol.. The tape used is too thick and not covered good in the corners. The Paragon version is thinner. Ifs funny because Conti installed his today also. @ 22min in ruclips.net/video/md2r9_5ipWM/видео.html
That corner was my fault. Not a product issue. I noticed it a little later and fixed it. I also missed a pice of the tape. It happens. I would have done much better if I hadn’t been focused on filming. The product is perfect. Paragon is a great company offering good products as well so I’m not knocking whichever product they have.
It’s a lot easier to install when you don’t have to think about the lighting, camera angle, sound and what you want to say. Most people won’t miss the little stuff. Luckily I don’t think it will matter. How’s your interior? Did you get it cleaned up after our friendly street sweeper?!
@@FrontSeatDriver I got new “ink” after the show so I haven’t touched it yet. With all the forecasted bad weather it’s in the back of my tandem garage anyway, so my daughter’s car is in front of it. I’ll get it cleaned up eventually. Should just take the duster on the wet/dry and a microfiber towel. The interior has a ceramic coating on it. 👍🏻
Jason, Great video and content man! I've always been on the fence about the Carbon Fiber overlay pieces because I've always felt they seemed kinda cheap looking! I'll have to wait and see yours in person, but they appear to look pretty nice with some good quality! Finish off with the remaining pieces for a full CF theme and it'll be 🔥 64 👍 Currently Be well -Shane
I think that a lot of you guys that have these channels for Corvettes are making a mistake, it seems like all your content is about the C8 Corvette, and there are tons of people out there, including myself that have C7 vets and Grandsports and Z06 , I can appreciate that you guys like the newer Corvette that came out, but you’re forgetting about all these other guys, including myself that have the C7, I for one will be leaving the channel and many other channels, because the C8 is of no interest to me, hope you guys understand, enjoy your Vette’s
I 100 percent understand. I have done most of what I can to my Z06. However, I actually have 2 videos to film very soon with my C7 Z06. 1 is product related and 1 is heavily informational.
I think your right! Even "if" I pull the trigger on getting any C8 in the future (if prices ever come back down to plant earth..lol).. I won't be getting rid of my C7 GS MT.. I always look forward to Jason's C7 Z06 videos.
Really fast mod to make a bold statement.
Absolutely. It looks really good. I’m really impressed.
@@FrontSeatDriver just ordered mine
Yes ❤
Agree.
Looks really good
Agreed. Thank you! 🙏
Great job. Now on to Justin's video.
That’s a great video he does!!!
Looks awesome man! Nice video.
Thanks, 11 second. I’m very happy with how easy it was to install and how the finished product looks.
I got serious 80's vibes from the unboxing music 🤘
Lol. Yup. It’s literally in the 80’s music category on Epidemic.
I love it. But, I'm an 80's teenager. So, what should we expect. LOL
You missed a piece of backing on the tape of the first piece.
Great looking kit, thanks!
Thanks, John. 🙏
Love me some EOS.
Really good carbon fiber products.
That looks so good! Huge difference. It goes from blah to BAM!
Truly does. More to come as well!
@@FrontSeatDriver Can't wait
Hey you missed pulling the upper right hand corner of your first piece, but it does look good on your vette.
Thanks, Mike.
Yeah, I noticed it when I was rewatching. I also didn’t push the back left side up correctly. I was able to fix that later.
Things like this go a lot easier when you don’t have to think about camera angle, lighting, knowing what you’re going to say and if the sound is good.
Anyway, thanks again. And appreciate the comment. Have a great evening! 🙏
gear and mode selector next, all silver must go
Agreed!!
Nice
Thanks, T!!
They look really good, I like it!!! 🤗
Thanks, Mark! It really turned out great!
Looks great!👍😎
Thanks! 🙏
A nice, simple mod that looks GREAT!!!
Thanks, Jim. 🙏
MUCH better!👍
Now, is there one for the instrument cluster, like the C7? How about the pieces on the door panels?
Yes. There’s one for the instrument panel and one for the waterfall but not sure about the door.
Wow, great job! That's exactly what I want to do to my C8. You made it look so easy.
It really is one of the easiest mods you can do.
Just purchased these , i like that they cover the whole corner edge , versus what I had was only to the edge.Also purchaes the rear diffusers like the ones you have ,they look like they are factory installed. I will wait a while for you to see how the clear engine cover will hold for six moths or so. It does make the engine bay come alive. Thanks for all the videos.
You’re very welcome!! Yeah, we’ll see how they look in time. In my limited time having it, it still looks great. Haven’t had to clean it yet.
Looks great!!
Thanks, Rob. See you soon!!
Looks great! Consider the one for the gauge cluster. I love it.
Yes. I definitely want that one as well.
And thank you. 🙏
looks 🔥🔥🔥🔥🔥🔥
Thanks, Josh!
Funny you mentioned the Pro Clip. I recently purchased one for my Ridgeline and just ten minutes ago I ordered one for my C6. I've never heard one complaint about the Pro Clip products. Nice add-on for your interior Jason. Well done. Wish I needed some, but I'm already pretty well loaded up on all my interior trim with Carbon Fiber. As to my exterior. Well, I used to be go chrome or go home, but now all the chrome is gone including the wheels and everything is now Carbon Flash including my wheels which haven't been painted, they're powder coated. I love the change. Once again, well done as to your decision to go with Carbon Fiber. Save the Wave 🙋♂ P.S. Does EOS have anything available in Carbon Flash for my antique C6?
Pro Clip is definitely a winner!!
The only thing I see is a front splitter in carbon flash for the C6.
How have you been feeling. Are you planning to hit any car shows as it warms up?
You will love your Pro Clip in the C6 Pete. Have one in mine and it is a game changer.
You didn't get all the tape off on that first piece.
Yeah. I realized when I was editing. Lol. Luckily it’s still sticking really good.
What source did you use? I guess I missed it.
Extreme Online Store. EOS.
Jason
Fantasy job on your podcast
The content was very informative thank you for sharing 👍
Thank you, Bill. 🙏
Good day Jason; always enjoy watching your content, and keep enjoying your beautiful C8; take care !
Thank you, Blue Vette. Have a great weekend!!
totally popping out in the corner on the left side. lol.. The tape used is too thick and not covered good in the corners. The Paragon version is thinner. Ifs funny because Conti installed his today also. @ 22min in ruclips.net/video/md2r9_5ipWM/видео.html
That corner was my fault. Not a product issue. I noticed it a little later and fixed it. I also missed a pice of the tape. It happens. I would have done much better if I hadn’t been focused on filming.
The product is perfect. Paragon is a great company offering good products as well so I’m not knocking whichever product they have.
That looks great Jason! 👍
Thanks, Lewis! 🙏
That carbon fiber looks WAYYYY better than the chrome.
Agreed. I’m really happy with how it looks and LOVE how easy it was to install.
You got that joint looking really nice bro I'm hoping to have my 2023 in July hopefully
Thanks, Fred!!
I hope you get it by then too. Perfect for summer car events!
thats how it starts, hard to stop every peace makes it look better next thing you know your 3k in
🤣 Agreed!!
Okay. Am I the only one that noticed you missed pealing the backing off a portion of the 1st piece you installed?
Agreed. Plus the left portion of the strip was sticking out and was not pressed down.
I know. I caught that as well. Luckily I watched soon after and stuck it on better.
It’s a lot easier to install when you don’t have to think about the lighting, camera angle, sound and what you want to say. Most people won’t miss the little stuff. Luckily I don’t think it will matter.
How’s your interior? Did you get it cleaned up after our friendly street sweeper?!
@@FrontSeatDriver I got new “ink” after the show so I haven’t touched it yet. With all the forecasted bad weather it’s in the back of my tandem garage anyway, so my daughter’s car is in front of it. I’ll get it cleaned up eventually. Should just take the duster on the wet/dry and a microfiber towel. The interior has a ceramic coating on it. 👍🏻
@@FrontSeatDriver Waiting to do mine as well. Your car looks great.
I feel it looks nice , but doesn’t match because is the only thing you have carbon on your interior .
It’s on my seat as well but I have more stuff on order so stay tuned. Thanks for watching. 🙏
Jason,
Great video and content man! I've always been on the fence about the Carbon Fiber overlay pieces because I've always felt they seemed kinda cheap looking! I'll have to wait and see yours in person, but they appear to look pretty nice with some good quality! Finish off with the remaining pieces for a full CF theme and it'll be 🔥
64 👍 Currently
Be well
-Shane
Thanks, Shane!!
I am planning on doing more for sure.
Great video will it match the factory carbon fiber?
I think it’s pretty close.
It's an overlay.
Correct. Just like in the Z06.
I think that a lot of you guys that have these channels for Corvettes are making a mistake, it seems like all your content is about the C8 Corvette, and there are tons of people out there, including myself that have C7 vets and Grandsports and Z06 , I can appreciate that you guys like the newer Corvette that came out, but you’re forgetting about all these other guys, including myself that have the C7, I for one will be leaving the channel and many other channels, because the C8 is of no interest to me, hope you guys understand, enjoy your Vette’s
I 100 percent understand. I have done most of what I can to my Z06. However, I actually have 2 videos to film very soon with my C7 Z06. 1 is product related and 1 is heavily informational.
By the way, I absolutely love my Z06. If you have any ideas for videos. Feel free to let me know. If I can do it, I will.
I think your right! Even "if" I pull the trigger on getting any C8 in the future (if prices ever come back down to plant earth..lol).. I won't be getting rid of my C7 GS MT.. I always look forward to Jason's C7 Z06 videos.
If you already have the carbon fiber interior option from factory does it match that weave??
It seems to be pretty close.