Owning a T1000 3DOF myself i have to say i love it ! i can only say one negative thing ....it makes a hell of a noise.... glad to see that i'm not the only one with a video that's longer then 1 hour LOL 👌😬
This is the exact reason why i made the switch to DBOX. In my opinion the Prosimu is just too heavy/bulky and the noise is terrible!! I went from T1000 3DOF to a DBOX 4250i on a SimLab P1-X. Wish i would have made that choice earlier.
You are right about the noise of the SCN6s. I’m assuming that is what you have? The PRS200 actuators are soooo much quieter than the T1000 SCN6 actuators, I own the Previous T1000 5DOF with all SCN6s and the biggest reasons I upgraded to the PRS200s was how much quieter and faster they are.
@@ribihome I am considering a T1000 5m. Is the sound and quality much worse than DBOX? Also what type of DBOX will I need to achieve all the effects in the video - ie 4250i achieve 4 DOF with traction loss etc?
@@dr_arcade I owned the T1000 3M with the Dyadic 100mm which are equal to the SCN6s (as Shannon B already mentioned above). The PRS200s are indeed more silent. The price of a 5M is not to far away from the new Gen 3 Dbox since the recent price-drop. I find the DBOX system more subtle in its movements. For simracing you don't need 100mm. The cheapest DBOX has 1,5" (3.5 cm) It is more than enough. If you plan to use flightsims a higher travel range is advised but that also counts for the Prosimu PRS200. Prosimu states that 100mm lets you feel the effects of the car and the the effects of the road. Having them tried both, i need to disagree. Altough the Prosimu is not bad at all, i prefer the quiet and more subtle DBOX over the noisy and bulky T1000, even without traction loss. Just my opinion.
Barry. Got say, yet another fantastic review but I’m left with two questions. First, is this set up better than the next level traction plus custom build you previously done and even was seen in this review. But secondly and has been ask before, will you ever build the homegrown SFX100 and compare. It’s fairly obvious that there is now no one better who can fully compare all the setups available to everyone’s budget.
Great review Barry! I own the P5MP and love it. The amount of detail I can feel with these actuators is incredible to the point I can feel the texture and details of the road surface. Try the game profile at 100% and increase the min/max range for heave in tuning center. I found this tones down the rough ride and allows me to feel the detail of the road surface. Setting game profile under 100% I feel muffles or smoothes a lot of the fine motion detail. I also own the previous T1000 5DOF with all SCN6 actuators. For those of you concerned with noise the new PRS200 actuators are so much quieter than the SCN6s. They do make a little noise but I don’t even notice over the game sound. Service from Prosimu has also been outstanding. Love your reviews Barry! Thank you!
I'm looking at getting a prosimu rig. How much better are the prs 200 actuators then the standard ones? Worth it? What size did you get ? 150mm ? Thanks Ben
I've owned this platform since release and have been extremely pleased with it. There were a few issues initially with the platform, but those have either been addressed or on their way to being addressed. Also, Patrick (the company owner) has provided excellent customer support from day one. I'd highly recommend it to anyway with the funds to make a purchase.
Hello Barry :) I am not the only one wondering how this setup is compared to the 4400i or the Next level seat mover+ TL. I know this is not a comparison video but if not planning to make one, some thoughts will be more than welcome. How is the FFb, details, do you connect with the car? what s your favorite etc etc etc... I was more exited for this review than last episode of game of thrones lol
Nice thanks Barry. I am still very much looking forward to ordering mine once I know how much the 7 costs and what it offers. Would hate to order the 5 only to be 6 months down the road and the 7 be released. @Prosimu do you have any plans to either change the cabling or offer a more shielded version? I like the small rack, nice touch. @Barry, they do offer a more rigid steering motor mount. It is bolted on either side. I think it looks better also. They offer it with their Pro setup so I bet you could upgrade to it easy enough. What say you @Prosimu ?
The Data cable of the PRS are shielded, we will do the same for the Power cable. BTW, lot of client have this setup and don't have any problem of EMI, but we will improve this part for sure and some other parts in few time.
Those poor lonely DD wheelbases under the desk at the start and one of those three (I think it's three) motion rigs surely need a new loving home. I'd even build an add-on to my garage just for one of those rigs. My father and his mate have a similar set-up for building kit cars, and I'm torn between which I'd prefer. I am leaning towards the dedicated Sim room mainly because this new rig looks so damn impressive. You must have so much fun when your mates pop in; it makes the old school LAN parties look like a pen and paper D&D evening from the 90's.
Nice review as usual! Thank you! You got a thumbs up 👍 I would love to see this motion platform with the simlab P1 on top! Do you think it could be possible to see soon? Thank you! Best regards.
Thank you very much for the review. Exactly what sort of interference did you experience that required the ferrite chokes? I've had this system for over a year now, and I can't say I've noticed any RFI issues myself.
Had some intermittent shifting glitches on the Fanatec APM's. This went away with the system powered down. Still not bad enough keep me from using it. RFI is a fickle thing with so many varibles effecting it's impact, I would not be surprised if someone else has no issues. I can only comment on my own experiences when using the system.
@@simracinggarage3026 Thanks a bunch for your response. You're correct about RFI being a a fickle thing. Would you be able to tell me what size ferrite chokes you used on the cables? Even though I haven't had any issues myself, it might not be a bad idea install some as a preventive measure.
Hi Barry, You have some nice service trollys ( black light weight ) in your workshop. If you have time please could you review :-) or let us know were they can be purchased. Thanks.
Hey Barry. Love the channel and reviews man great stuff. Have you driven the rig with the standard actuators? Are the prs 200s worth then cost in your opinion? Thanks
@@simracinggarage3026 ok Barry thanks for your reply. How do they compare to a dbox? Obviously d box is more expensive by quite a bit. Do they have similar performance?
Hi you should try hooking the monitors to the DOF base have them move too, more natural and realistic, think about. Remember your seat don't move around in your car.
Hi. That's true, and would be very cool. I have found that in Assetto Corsa Competitione has a graphics setting(s) that tilts the view out the windshield around corners. Project Cars 2 didn't seem to have that option, though. However, cylinder life may be another issue. For DBox and other systems like this, it's not just the 'static load' or weight of you and your rig, it's the extra Force (F=Ma) that's required to accelerate all that weight sideways, up and down, etc. I trust when DBox says their cylinders are rated at 250# that means it will handle 250# static weight each, and still handle all the acceleration forces that the cylinders will see, and have high reliability. I'm sure Prosimu gave consideration to that when rating the cylinders, but until we see how long the cylinders they're using last from users over time, it may be best to try to limit the amount of weight the cylinders are lifting. To each his own, though. Best! :)
I know what you're saying but I think some systems don't advise this because of how it affects weight distribution and centre of gravity. I suppose it would be possible to compensate with custom settings. VR would be another option of course
Barry do you think the 100mm Actuators would work? I get the impression the 150's have more travel than you need? For the price the wheel flex and shielding issues should be addressed. I'd like to see how it would handle your P1-X cockpit mounted on it. Kind of feel like if your selling it in the U. S. it should work on our power but that's not a deal breaker like the wheel flex and shielding are. I'll wait and see what the P7MP addresses
100mm would be plenty for regular circuit racing. Even my D-BOX system has ample motion range at only 35mm IMO. More travel is great when it comes to Rally, Dirt Trucks and Flight sims. Better able to replicate the longer travel supensions and Flight characteristics. I will be mounting a P1-X to this platform in the near future as time permits. Prosimu has told me they already have plans for strenghtening their cockpits and making some all around improvements to their system.
Yes not quite by any means. But, when driving at my normal car sound levels, I don't notice the PRS200's. I do notice the SCN6 actuator once in a while during slides.
I ended up buying a 250# DBOX 4-Cyl system, similar to Barry's, about 3mo. ago specifically because the noise on these cylinders is so objectionable on vids I've seen. I also believe D-Box Cylinders will be more reliable/heavy duty than these Prosimu cylinders. However, time will tell. An option would be to use headphones for sound, but I'm 68 and my hearing already is not that good. So rather than risk more hearing loss with headphones, I use speakers, and would have to turn them up a lot more to hear above all the cylinder noise. I can't justify/afford 6" D-Box cylinders though, so it would be great to see D-Box introduce similar higher-displacement cylinder system, with sway that I've seen being developed/tested at a much closer lower price than current D-Box 6" 4-post systems. We can only hope. If Prosimu lowers cylinder noise substantially, and the cylinders prove to be more reliable than I currently suspect (D-Box is expensive for a reason), I'll be In! :)
Compare what is comparable : Dbox 100mm/s for the speed and PRS200 : 280mm/s so it's normal that the PRS 200 make more noise..... It's comparable with a car that have a speed of 100km/h and another 280km/h..... not the same specification - not the same noise. And finally If you put 1.5 inch of travel : the PRS 200 do the same noise as Dbox for less money ;-)
That makes more sense. I was looking at the t5 Pro but couldn’t find anything that showed or explained that there was an SCN6 actuator that made the yaw movements. Thanks.
Budget for sure because the Primisu T1000 costs around 8 grand+ VS the DOF reality at around I think 4 grand? The Primisu is an entirely different category of machine. The DOF runs on motors that are similar to wiper motors with limited range VS servo motors with built in encoders and long ball screws to give you 6 inches of travel. The price of just the actuators on these things are usually around 2,500 to 2700 each with NEMA 34 servos so the price for the base model is pretty reasonable. I did not watch the whole video I was wondering if it was running at 220 volts AC? If I had the cash the Primisu would be my first choice because anything comparable would cost you over 14 grand. Obviously take that with a grain of salt because I am no expert on ether setup but the DOF Reality always felt rushed to get to market where this looks really well constructed though building it takes time. EDIT: I wanted to add there looks like a lot of wash in DOF where this showed sum but not nearly as much.
@@netgeek3010 ok i know all that. But i have a buget of 2000eur +-, so the choice is betwen Promisu T1000 M2 with dyadic scn6 actuadors or dof reality h3 ?
Mücahit Simsek I sure hope so. I remember someone from Fanatec reaching out to to “test” something new when they saw how unhappy i was with the QR system on my DD2. It’s probably a non 3D printed Z Ring that they’ll say they invented. I’d imagine it’ll cost a minimum of $100 no matter what it is.
ErnieGaming The flex sucks for sure but what’s even worse for me is the fact it takes a bucket of grease to make the wheels easy to swap out. Some reason it’s a nightmare for my DD2. Both issues don’t reflect a $1500 wheel base.
Simtools is a bit limited but i think you can use FLypt-mover (which works with simtools) www.xsimulator.net/community/threads/flypt-mover.13464/ for more fine control and extra forces on actuators. Love the software though, im using it for my DIY Gseat!
I have a Motion System with FREX Hyperaxis actuators, which are modified that I am able to lubricate the screw drive very easy and fast without demounting and disassembling the whole actuator. Screw drives of such actuators like SCN or PRS200 need lubrication from time to time, I see some problem here with this System design, maintenance is too complicated.
@kevin soucy yeah I know that. But honestly, do you really think it is not important to lubricate the moving metal screw drives? I know the people who invented the SFX-100 actuators personally and one of them says the same I do. For sure such a PRS200 actuator will run for hours and hours, even for many months without any problems, Only the long run with heavy usage after a long term will tell if they are maintenance free as stated. Time will tell. But at the end of the day all actuators are mechanically nearly the same, screw drives which are driven by a fast and strong motor, I never want my screws to drive dry, so I lubricate regularly Don´t get me wrong, I like what I see here, very strong and fast actuators with lots of power and I like the 150mm travel way, I have only 100mm. I like the PRS200, but I just don´t "buy" that maintenance free bla bla.
I love watching you reviews, but like this one they are getting way out of line, too compicated and costly with the average person, and really where would one put it, I can see that your garage is nearly full
What people by this? MLG professional gamers, millionaires? What does this setup up cost 40-50'00? ProSimU T1000 5M 4DOF Motion System 16-20'00 cad! Id' rather own a Corvette than a RaceSim but I guess this is for pro gamers or Very Rich people! I have rich friends that are gamers! They would never waste their money on this stuff!
Owning a T1000 3DOF myself i have to say i love it ! i can only say one negative thing ....it makes a hell of a noise.... glad to see that i'm not the only one with a video that's longer then 1 hour LOL 👌😬
This is the exact reason why i made the switch to DBOX. In my opinion the Prosimu is just too heavy/bulky and the noise is terrible!! I went from T1000 3DOF to a DBOX 4250i on a SimLab P1-X. Wish i would have made that choice earlier.
You are right about the noise of the SCN6s. I’m assuming that is what you have? The PRS200 actuators are soooo much quieter than the T1000 SCN6 actuators, I own the Previous T1000 5DOF with all SCN6s and the biggest reasons I upgraded to the PRS200s was how much quieter and faster they are.
@@ribihome Isnt DBOX more super expensive?
@@ribihome I am considering a T1000 5m. Is the sound and quality much worse than DBOX? Also what type of DBOX will I need to achieve all the effects in the video - ie 4250i achieve 4 DOF with traction loss etc?
@@dr_arcade I owned the T1000 3M with the Dyadic 100mm which are equal to the SCN6s (as Shannon B already mentioned above). The PRS200s are indeed more silent. The price of a 5M is not to far away from the new Gen 3 Dbox since the recent price-drop. I find the DBOX system more subtle in its movements. For simracing you don't need 100mm. The cheapest DBOX has 1,5" (3.5 cm) It is more than enough. If you plan to use flightsims a higher travel range is advised but that also counts for the Prosimu PRS200. Prosimu states that 100mm lets you feel the effects of the car and the the effects of the road. Having them tried both, i need to disagree. Altough the Prosimu is not bad at all, i prefer the quiet and more subtle DBOX over the noisy and bulky T1000, even without traction loss. Just my opinion.
I’ve been waiting for part two of this since part one came out ! I love your videos you are very thorough with everything you do!
Barry. Got say, yet another fantastic review but I’m left with two questions.
First, is this set up better than the next level traction plus custom build you previously done and even was seen in this review.
But secondly and has been ask before, will you ever build the homegrown SFX100 and compare.
It’s fairly obvious that there is now no one better who can fully compare all the setups available to everyone’s budget.
Hi, and is it possible to mount a T1000 5M on a NLR traction plus ? I m curious to get the better of two worlds !
Great review Barry! I own the P5MP and love it. The amount of detail I can feel with these actuators is incredible to the point I can feel the texture and details of the road surface. Try the game profile at 100% and increase the min/max range for heave in tuning center. I found this tones down the rough ride and allows me to feel the detail of the road surface. Setting game profile under 100% I feel muffles or smoothes a lot of the fine motion detail. I also own the previous T1000 5DOF with all SCN6 actuators. For those of you concerned with noise the new PRS200 actuators are so much quieter than the SCN6s. They do make a little noise but I don’t even notice over the game sound. Service from Prosimu has also been outstanding. Love your reviews Barry! Thank you!
Shannon I also own the P5MP platform , we should share settings of simtools😀
I'm looking at getting a prosimu rig. How much better are the prs 200 actuators then the standard ones? Worth it? What size did you get ? 150mm ? Thanks Ben
@@benjaminbeames665 much much better. Well worth it! You will not be disappointed. I went with 100mm which I feel is more than adequate for racing
Thanks for another uniquely detailed and thorough video Barry. No one like you; keep them coming!
Barry never seeses to amaze in his detailed inspection of all elements for sure
I've owned this platform since release and have been extremely pleased with it. There were a few issues initially with the platform, but those have either been addressed or on their way to being addressed. Also, Patrick (the company owner) has provided excellent customer support from day one. I'd highly recommend it to anyway with the funds to make a purchase.
Wheel mount flexes annoying?
Is it possible to mount the monitors on the rig?
@@Space-O-2001 Would like to know as well..
I bet there isn't any Sim Racing person who wouldn't want to spend a day in Barry's Garage 😁 awesome review Barry 👍 Thank you
You make the best by far SIM gear reviews, i just wish i could afford some of these toys for myself. Been looking forward to this part 2
I will never be able to purchase such system in my entire life but damn i like watching this channel.
Next Job for Barry : Build and extension on his workshop ! Great Review as we expected. Thanks Barry and Have a great day.
VERY informative. My dream setup. I knew something like this had to exist. Thanks for letting me see the dream at least. Take care!
Should I buy this or a DOF Reality H3?
Make sure to keep the 4 DOF rig around, they are about to release a 6 DOF upgrade... that's the review I'm looking for!!
“I usually run my dd2 around 100%”. Holy smoke Batman!
Hello Barry :) I am not the only one wondering how this setup is compared to the 4400i or the Next level seat mover+ TL. I know this is not a comparison video but if not planning to make one, some thoughts will be more than welcome. How is the FFb, details, do you connect with the car? what s your favorite etc etc etc... I was more exited for this review than last episode of game of thrones lol
Nice thanks Barry. I am still very much looking forward to ordering mine once I know how much the 7 costs and what it offers. Would hate to order the 5 only to be 6 months down the road and the 7 be released. @Prosimu do you have any plans to either change the cabling or offer a more shielded version? I like the small rack, nice touch. @Barry, they do offer a more rigid steering motor mount. It is bolted on either side. I think it looks better also. They offer it with their Pro setup so I bet you could upgrade to it easy enough. What say you @Prosimu ?
The Data cable of the PRS are shielded, we will do the same for the Power cable. BTW, lot of client have this setup and don't have any problem of EMI, but we will improve this part for sure and some other parts in few time.
$34k
Love your videos! I’m curious your thoughts on the differences between this design, vs the sim craft design.
Those poor lonely DD wheelbases under the desk at the start and one of those three (I think it's three) motion rigs surely need a new loving home. I'd even build an add-on to my garage just for one of those rigs.
My father and his mate have a similar set-up for building kit cars, and I'm torn between which I'd prefer. I am leaning towards the dedicated Sim room mainly because this new rig looks so damn impressive.
You must have so much fun when your mates pop in; it makes the old school LAN parties look like a pen and paper D&D evening from the 90's.
Nice review as usual! Thank you! You got a thumbs up 👍
I would love to see this motion platform with the simlab P1 on top! Do you think it could be possible to see soon?
Thank you! Best regards.
Yes, working on doing that now.
Sim Racing Garage wow, that will be amazing!! Thank you Sir 🙏
Hi Barry.... You're QR on the fanatec wheel looks strange. Could you tell us about it?
Hey Barry, for road texture detail, how would you rate this against your D box setup?
I really want to know :( I decided to buy DBOX as it is perceived as higher quality. But I will never know.
Could you reverse the seat brackets? It looks like if you swapped out the left side with the right you could get more "tilt".
16:25 nice effect :)
A ro I was going to say, did anybody else notice that?? Coincidences can be fun sometimes!
Are you going to review the new HPP pedals?
A the time of the video, this cost about 8,700 euros and now the same package costs about 11,100 euros. That's quite a price increase!
I have also been getting Simtools errors when loading Dirt4 recently. Same errors. Worked perfectly before.
I can't wait for the review of that thing you're trying to hide under the yellow cloth, Barry.😎
Thank you very much for the review. Exactly what sort of interference did you experience that required the ferrite chokes? I've had this system for over a year now, and I can't say I've noticed any RFI issues myself.
Had some intermittent shifting glitches on the Fanatec APM's. This went away with the system powered down. Still not bad enough keep me from using it. RFI is a fickle thing with so many varibles effecting it's impact, I would not be surprised if someone else has no issues. I can only comment on my own experiences when using the system.
@@simracinggarage3026 Thanks a bunch for your response. You're correct about RFI being a a fickle thing. Would you be able to tell me what size ferrite chokes you used on the cables? Even though I haven't had any issues myself, it might not be a bad idea install some as a preventive measure.
I used some 13mm ones. It was tight but they did snap shut ok.
@@simracinggarage3026 Thank you!
Hi Barry, You have some nice service trollys ( black light weight ) in your workshop. If you have time please could you review :-) or let us know were they can be purchased. Thanks.
Bought from ULINE.com. Mine are 48"x24" 3 shelf.
Thats very kind Barry - Wishing you a great time.
Hey Barry, can you please tell me the brand of the pedals that you're using on this video ?
Meca.
Hey Barry. Love the channel and reviews man great stuff.
Have you driven the rig with the standard actuators? Are the prs 200s worth then cost in your opinion? Thanks
I only have experience with the 200 's. So can't comment.
@@simracinggarage3026 ok Barry thanks for your reply.
How do they compare to a dbox? Obviously d box is more expensive by quite a bit. Do they have similar performance?
Hi you should try hooking the monitors to the DOF base have them move too, more natural and realistic, think about. Remember your seat don't move around in your car.
Hi. That's true, and would be very cool. I have found that in Assetto Corsa Competitione has a graphics setting(s) that tilts the view out the windshield around corners. Project Cars 2 didn't seem to have that option, though. However, cylinder life may be another issue. For DBox and other systems like this, it's not just the 'static load' or weight of you and your rig, it's the extra Force (F=Ma) that's required to accelerate all that weight sideways, up and down, etc. I trust when DBox says their cylinders are rated at 250# that means it will handle 250# static weight each, and still handle all the acceleration forces that the cylinders will see, and have high reliability. I'm sure Prosimu gave consideration to that when rating the cylinders, but until we see how long the cylinders they're using last from users over time, it may be best to try to limit the amount of weight the cylinders are lifting. To each his own, though. Best! :)
I know what you're saying but I think some systems don't advise this because of how it affects weight distribution and centre of gravity. I suppose it would be possible to compensate with custom settings. VR would be another option of course
Barry do you think the 100mm Actuators would work? I get the impression the 150's have more travel than you need? For the price the wheel flex and shielding issues should be addressed. I'd like to see how it would handle your P1-X cockpit mounted on it. Kind of feel like if your selling it in the U. S. it should work on our power but that's not a deal breaker like the wheel flex and shielding are. I'll wait and see what the P7MP addresses
100mm would be plenty for regular circuit racing. Even my D-BOX system has ample motion range at only 35mm IMO. More travel is great when it comes to Rally, Dirt Trucks and Flight sims. Better able to replicate the longer travel supensions and Flight characteristics. I will be mounting a P1-X to this platform in the near future as time permits. Prosimu has told me they already have plans for strenghtening their cockpits and making some all around improvements to their system.
@@simracinggarage3026 Thanks for the great reviews. Looking forward to Prosimu updates and the P1-X
This thing is loud as hell! Especially compared to my 3Motion from Tracktime.
Yes not quite by any means. But, when driving at my normal car sound levels, I don't notice the PRS200's. I do notice the SCN6 actuator once in a while during slides.
@@simracinggarage3026 But my neighbours will notice it! :)
I ended up buying a 250# DBOX 4-Cyl system, similar to Barry's, about 3mo. ago specifically because the noise on these cylinders is so objectionable on vids I've seen. I also believe D-Box Cylinders will be more reliable/heavy duty than these Prosimu cylinders. However, time will tell. An option would be to use headphones for sound, but I'm 68 and my hearing already is not that good. So rather than risk more hearing loss with headphones, I use speakers, and would have to turn them up a lot more to hear above all the cylinder noise. I can't justify/afford 6" D-Box cylinders though, so it would be great to see D-Box introduce similar higher-displacement cylinder system, with sway that I've seen being developed/tested at a much closer lower price than current D-Box 6" 4-post systems. We can only hope. If Prosimu lowers cylinder noise substantially, and the cylinders prove to be more reliable than I currently suspect (D-Box is expensive for a reason), I'll be In! :)
Compare what is comparable : Dbox 100mm/s for the speed and PRS200 : 280mm/s so it's normal that the PRS 200 make more noise..... It's comparable with a car that have a speed of 100km/h and another 280km/h..... not the same specification - not the same noise. And finally If you put 1.5 inch of travel : the PRS 200 do the same noise as Dbox for less money ;-)
Is there a new Fanatec QR beneath the towel? :)
The Prosimu P7MP platform will be released soon. Would love to see Barry do a video mounting something like a P1-X cockpit to it.
Exciting times for sure.
amazing reviews
For the powering of the unit, why can't you just use 2 poles (240 VAC) and ground?
canI mount space and racing in the same time like sim lab chassis?
Could you swap the seat mounts over so the slots are at the front and holes at the back? It looks like the holes go lower than the slots.
Yes, but still limited by the cockpit frame under the seat. As seen it is very little room left before making contact.
how do you afford these? do you buy them yourself or are they sponsered?
probably review units, thats how he got the next level racing traction plus
Is there a body weight limit or weight limit for effective function? Im 250lbs just wondering if this will respond the same for me.
Each actuator can maintain 280mm per second up to 193kgs according to Prosimu. So, I think you would be good.
Is the prosimu t5 pro 4dof? I can only see that it uses roll, pitch, and heave. Can’t see if it has yaw and couldn’t find an answer on the website.
Yes, it has an SCN6 actuator for the yaw element. See Part 1 "The Build" video for details on how it works.
T5 Pro is another product and have a SCN6 hide by the steel frame : so it's a 4 DOF.
That makes more sense. I was looking at the t5 Pro but couldn’t find anything that showed or explained that there was an SCN6 actuator that made the yaw movements. Thanks.
Brand new and all that electrical tape?
seat bracket can try the other way round?
a new QR will arrive for the DD wheelbase
Thinking buy a motion plataform. What to chose, dof reality h3 or primisu t1000 2dof ?
Budget for sure because the Primisu T1000 costs around 8 grand+ VS the DOF reality at around I think 4 grand? The Primisu is an entirely different category of machine. The DOF runs on motors that are similar to wiper motors with limited range VS servo motors with built in encoders and long ball screws to give you 6 inches of travel. The price of just the actuators on these things are usually around 2,500 to 2700 each with NEMA 34 servos so the price for the base model is pretty reasonable. I did not watch the whole video I was wondering if it was running at 220 volts AC? If I had the cash the Primisu would be my first choice because anything comparable would cost you over 14 grand. Obviously take that with a grain of salt because I am no expert on ether setup but the DOF Reality always felt rushed to get to market where this looks really well constructed though building it takes time.
EDIT: I wanted to add there looks like a lot of wash in DOF where this showed sum but not nearly as much.
@@netgeek3010 ok i know all that. But i have a buget of 2000eur +-, so the choice is betwen Promisu T1000 M2 with dyadic scn6 actuadors or dof reality h3 ?
@@edgarprazeres8106 I think that if you play car games,the ProSimu will be a good choice.
Edgar Silva h3 is amazing. You get 6 dof sensation for price of 2. Go for it
@@gmerariu you mean 3 dof for the price of 2 right?
Barry, I would love for you to review gforcefactory 6dof. It seems interesting and I trust your reviews.
I'll look into it.
Do you have a PT actuators kit that you'll be testing?
Working on getting one for testing.
@@simracinggarage3026 can wait for you to review PT and compared it to dbox and prosimu
Neu Fanatec QR?
Mücahit Simsek I sure hope so. I remember someone from Fanatec reaching out to to “test” something new when they saw how unhappy i was with the QR system on my DD2.
It’s probably a non 3D printed Z Ring that they’ll say they invented. I’d imagine it’ll cost a minimum of $100 no matter what it is.
I hope so. Can't wait to get rid of the flex in my DD2 QR. That's the only thing that bothers me. Otherwise it's a great wheelbase.
ErnieGaming The flex sucks for sure but what’s even worse for me is the fact it takes a bucket of grease to make the wheels easy to swap out. Some reason it’s a nightmare for my DD2. Both issues don’t reflect a $1500 wheel base.
@@OhItsThat Yes i agree. Changing the steering wheels is a hassle. I always need a lot of pulling force to get the rim off.
If I buy this, will I regret not buy DBOX instead?
looks like you could get more rearward tilt on your seat if you reversed the brackets
Yes, but still limited by the cockpit frame under the seat. As seen it is very little room left before making contact.
What triple monitor is that?
27" Asus ROG PG279Q IPS
55:00 whats is this game?
Simtools is a bit limited but i think you can use FLypt-mover (which works with simtools) www.xsimulator.net/community/threads/flypt-mover.13464/ for more fine control and extra forces on actuators. Love the software though, im using it for my DIY Gseat!
I have a Motion System with FREX Hyperaxis actuators, which are modified that I am able to lubricate the screw drive very easy and fast without demounting and disassembling the whole actuator.
Screw drives of such actuators like SCN or PRS200 need lubrication from time to time, I see some problem here with this System design, maintenance is too complicated.
@kevin soucy yeah I know that. But honestly, do you really think it is not important to lubricate the moving metal screw drives? I know the people who invented the SFX-100 actuators personally and one of them says the same I do. For sure such a PRS200 actuator will run for hours and hours, even for many months without any problems, Only the long run with heavy usage after a long term will tell if they are maintenance free as stated. Time will tell. But at the end of the day all actuators are mechanically nearly the same, screw drives which are driven by a fast and strong motor, I never want my screws to drive dry, so I lubricate regularly
Don´t get me wrong, I like what I see here, very strong and fast actuators with lots of power and I like the 150mm travel way, I have only 100mm. I like the PRS200, but I just don´t "buy" that maintenance free bla bla.
I love watching you reviews, but like this one they are getting way out of line, too compicated and costly with the average person, and really where would one put it, I can see that your garage is nearly full
hey since I got here in under 10 minutes, you wanna share the motion system with me? I PROMISE I won't steal it......
lol you want steal it ....it weighs a TON ;-)
10000 POUNDS THE PLATFORM AND GET FLEX ARFFF
What people by this? MLG professional gamers, millionaires? What does this setup up cost 40-50'00? ProSimU T1000 5M 4DOF Motion System 16-20'00 cad! Id' rather own a Corvette than a RaceSim but I guess this is for pro gamers or Very Rich people! I have rich friends that are gamers! They would never waste their money on this stuff!