Does the paddle need to be broken down into 3 pieces when packing and storing? I have been keeping the top and middle section together since it is the same length (when adjusted to shortest setting) as the bottom portion with the blade.
Battens... Something that doesn´t make sense when in some other videos Red P Co. states that msl is unbendable. Starboard has a Double chamber which is stiffer and there´s not much of a hassle. I hope you fix this.
There are many cases for and against battens or double chamber. A batten requires extra effort to install. A second chamber adds several more feet of seam and rail to a board. Seams that could potentially fail or leak. When producing a double chamber board, you are cutting a hole in the middle of an otherwise airtight board. Only to add a second airtight chamber. You are almost doubling the seam length per board. Red have chosen battens, Starboard offer single and double chamber.
When you pack your bag, pay attention to where the fins are positioned. Line them up with a corner for extra space inside the bag, and be sure to store the bag fin corner up so they aren't squashed.
My board really been packed inside the bad most of the time the board it's in my car boot or even when it's inside my place isn't inside the bad fins are nightmare they are bending pretty much since day one when I purchased the board
Does the paddle need to be broken down into 3 pieces when packing and storing? I have been keeping the top and middle section together since it is the same length (when adjusted to shortest setting) as the bottom portion with the blade.
Battens... Something that doesn´t make sense when in some other videos Red P Co. states that msl is unbendable. Starboard has a Double chamber which is stiffer and there´s not much of a hassle. I hope you fix this.
There are many cases for and against battens or double chamber. A batten requires extra effort to install. A second chamber adds several more feet of seam and rail to a board. Seams that could potentially fail or leak. When producing a double chamber board, you are cutting a hole in the middle of an otherwise airtight board. Only to add a second airtight chamber. You are almost doubling the seam length per board. Red have chosen battens, Starboard offer single and double chamber.
Hello, looking to buy a Ride 10.6 but are the ifins replaceable when they are damaged? Thx and grts Dirk
New fins can be glued down if you damage the originals.
It would help if you didn't have that music.
How much its the max psi for 10 6 red sup
18-22 PSI is the suggested range
Thanks
My fins are always bending even after I use hot water or air to straighten them so irritating 🙄
When you pack your bag, pay attention to where the fins are positioned. Line them up with a corner for extra space inside the bag, and be sure to store the bag fin corner up so they aren't squashed.
My board really been packed inside the bad most of the time the board it's in my car boot or even when it's inside my place isn't inside the bad fins are nightmare they are bending pretty much since day one when I purchased the board
Tedious video.