AJAX Alarm System Review: Control Devices KeyPad and KeyPad Plus

Поделиться
HTML-код
  • Опубликовано: 19 ноя 2024

Комментарии • 13

  • @frankrafferty660
    @frankrafferty660 Год назад +1

    Great videos, I used to have a count down timer as I exited or entered the home. I don't hear this now, any ideas.

    • @inaxsys
      @inaxsys  Год назад

      Thank you Frank. I am assuming that the beeping was from your Indoor siren, correct? If so, see how to make sure your sire is set to beep on entry and exit delay:
      Disarm the system.
      Under devices select the siren and select the settings button at the top right.
      Scroll down to beeps settings and make sure the beep on delays options are turned On.
      If the above is already set, make sure that your detection devices such as door protect for instance are set with an entry / exit delay timer.

  • @christophergallagher3982
    @christophergallagher3982 2 месяца назад

    I assume you cant have both? Code & tag?

  • @gianniskotsou7350
    @gianniskotsou7350 4 месяца назад

    Can you arm the alarm with external contact open and main closed? Or the opposite? Or they act as one?

    • @vatsok
      @vatsok 2 месяца назад

      yes you can

  • @steveoba3539
    @steveoba3539 Год назад +1

    Hey, How come I am able to Arm my system even when the doors are opened? Thanks

    • @inaxsys
      @inaxsys  Год назад +2

      Hello! Go to hub settings while the system is disarmed. Go to Service and System Integrity Check and enable this feature. Then, the system will check for opened devices and alert you before arming.

    • @steveoba3539
      @steveoba3539 Год назад

      @@inaxsys Thank you for the quick response. I will give that a shot.

    • @steveoba3539
      @steveoba3539 Год назад

      @@inaxsys This is definitely a fail in system design, There should be an option to bypass a zone if required. However, doors and windows should be closed to Arm system.

  • @andrejborges
    @andrejborges Год назад +1

    Hello, can I add two keypads to one AJAX system?

    • @inaxsys
      @inaxsys  Год назад +1

      Thank you for question, Andrej! The Ajax Hub 2 Plus supports up to 200 devices including keypads. So you can definitely have two keypads on one Ajax system.

  • @Blobby192
    @Blobby192 Год назад

    cool