Working as a mechanic for 11 years on many high performance cars and vintage race cars we installed and serviced a lot of flexible stainless brake lines. We installed top brands like Spiegler and Earl's. Many of these brake line installations failed within just a few months. Flexible ends or not, this hardware is not really suitable for everyday street use. There is simply more flex at the line ends than the lines can handle, and the hose ends up splitting close to the end fitting. It is even a problem for race cars. The rubber hoses can tolerate a lot more flex cycles than the stainless hose.
Interesting. I also work for a high-end repair facility(20+ yrs) but have no experience the brands that you mentioned. I currently have StopTech lines on my Honda and Techna-Fit lines on my daughter's Nissan. Both have DOT approved fittings and have shown no signs of flexing failure. I sold my previous Volvo 240 with IPD lines that endured over 12 years/200k miles. Correct routing is essential and the technician was meticulous during those installs. I would tend to think that any SS braided brake hose that encounters more stress than it's rubber counterpart would be due to a poorly designed/built hose and/or improper routing during installation.
He's smart. Forums where some holy wars are waged debate this sort of "fine print". By giving you those hot links, you can easily copy & paste that into a forum to support an argument/claim, and he gets additional views. Win win.
I put Stainless Steel brake lines on my motorcycle. I simply did it because I found the braking "Feel" to be much better. Very firm levers after installed. Of course part of this could be the fact that I installed new fluid and made sure they were bled to perfection. Nevertheless, they were red. I like red.
Regular maintenance is probably a better investment on such a light vehicle. How often are rubber brake lines supposed to be changed on a bike, and who really does it to that schedule?
I used to do the stainless thing. Then I found that it's really hard to tell the difference between stainless and _new_ rubber lines - but most people are comparing them to the old, worn-out rubber lines that they're replacing. if you're a professional (with a like skill set) or if you're driving off-road a lot, I can see the point. But for spirited driving or the occasional track day - probably not worth the expense.
@@aussiebloke609 I absolutely agree with your on this point, I got my WRX braided brake line replace on my new WRX after 3500kms, same brake fluid, same pads and rotors, nothing firmer or better brake feedback compare to OE new rubber line, only find it change better by investing a bigger rotor, pads and calipers.
I put stainless steel braided brake lines on my motorcycle years ago and I couldn’t believe how much better the braking feel was. I did the same to my car and not much difference. I took the steel braided lines off and put new rubber lines on.
One reason why many people see an improvement in brake pedal feel after upgrading is because they're replacing 15+ year old rubber hoses with brand new lines. They would've felt a difference too with new rubber hoses
Same goes with people talking down on "rubber bushings"..and wanting to put polyurethane bushings in their street car..and saying "those rubber bushings are crap compared to the nice colored poly bushes".They are comparing an old worn out part to a new "upgraded" part...and that automatically means that the original part is "crap."....man.....gotta love the 98percenters ;)
I replaced originally with new rubber lines. My peddle feel was still mushy. So I replaced the master cylinder, still mushy. Found a deal on stoptek steel braided lines. (Cost was similar to the rubber lines.) So I picked them up, replaced the front lines. Still mushy, replaced the rears then, no mushy feeling. All new fluid, I replace every year to year and a half, mostly because I want a regular change so I never forget.
I installed ss brake lines on my car just in the front. The brake pedal feel isnt really any different but the braking response is more immediate and responsive
fuckinlowdowndrummer deffinetly not true ..if u track ur car or even street race doing digs.upgrading the bushing is a must to prevent flex.another important part is if ur start making lower and the motor flex u will have shifting issue.these are things that I personally have been through
I honestly want to know what can be done with that little thing. The driving ergonomics with the manual are surprisingly decent for such as small and cheap car. I'm sure it's not beating Civic Type R, ever, but...
In my opinion... The main reason is general brake feel, not necessarily during track conditions or from heat of the fluid expanding. The benefits are felt EVERY SINGLE TIME you press the brake pedal, at any speed. The oem rubber lines dont hold the 100's of psi (during even a regular brake application) without deforming slightly, which is felt in pedal feel. However, many cars have very soft cast brake calipers , that flex significantly as well. If you have basic cast calipers (or non-perfomance street pads with low initial bite), you will still have a spongy pedal feel even with the stainless steel lines, so just save your money. I agree on the downsides, however.
One thing I didn't see mentioned also is stainless steel brake lines are also abrasive. Instead of rubber there's a PTFE line in there surrounded by a plastic cover to help prevent the stainless steel sheath from cutting into the line. Add in some road grit and tens of thousands of turns and flexing of the line inside the stainless steel sheath the brake lines are now a limited lifetime wear item. As it's life rubbing a piece of steel wool over the plastic protective cover every time you turn the steering wheel.
There is another reason for stainless steel brake lines, and that is feel. Knowing what is happening at the pad is another piece of telemetry that I appreciate. You don't need it on the street, but I have them for the feel. Just because you technically don't need them on a street car, doesn't mean you shouldn't use them. If your car is your love and you don't track it, there are better places to spend your money. Its just this guy's opinion from a practical perspective.
SS brake lines also benefit if you do any type of backroad or canyon driving. Fluids don't have to reach boiling point for you to feel the benefit of SS lines.
i use to track my z1000 on oe rubber hose the dual 4 pot tokico works a treat but after a few laps they start to get smoshier not much but the lever seem to go in deeper then when you first start after i replace to earls racing steel lines the braking pefromacne stays consistant troughtout the session for road i say the difference its unlikly to be noticable but when your fluid are hot from constant full braking corner after corner the rubber hose will degrade your performance as the laps piles up but if im honest on the road you barely feel the difference maybe abit of feel but definitly wont shorten your emergency braking distance to be honest
Very informative, really looking forward to this "fine print" line of videos, glad to see you trying new things with the channel. It's turning into one of my favorite car related RUclips destinations.
you dont know how long ive waited for this exact video!!! I am rebuilding my 1950 Cadillac and I really was confused on the benefit of steel brake lines !!
Thanks for this. I was considering putting some braided lines on while doing the brake pads, but I think I'll just use some new rubber lines, since the ones on there now are about 12-13 years old. I don't do serious track driving, because I don't really have the spare time or money to get into it. Fundamentally, even though I do like to go fast, it's still just street driving.
I'm glad someone is making videos like this with so much misinformation on the internet. I myself have all this stuff too, but like said in the video just know what you are getting yourself into. more maintenance and checking.
New segment type is really cool. Loved watching you hold back a smirk when you say the tagline at the end! Keep them coming. This wasn't news to me but I'm sure plenty will have some helpful info, can't wait to see more.
I love my goodridge ss lines. the feel is amazing and adds to performance just because of that. It is very vaulable on the street imo. THe brakes are the most important thing on a car. I will have them on all my cars.
I didn't like the way this guy started slow with a lot of words and wide spaces between them at the first glance, but it it's got all perfectly aligned with the actual information the video was claimed to deliver. I was very pleased to see all of my qustion answered exactly the way they should have been. Good job!
Just subscribed. I watched two of your vids and I must say the channel is excellent with great commentary that includes unbiased impressions and useful technical details.
I'm looking into replacing mine on my daily driver. I live in Los Angeles. Believe it or not, I do feel brake fade in the hot summer weather on the rapid stop and go traffic. After replacing yours, can you tell me how the braking feels? Are your brakes wearing faster? What vehicle do you drive?
I live in LA too, I drive a 2001 toyota celica gt. After installing the lines the brake pedal feels very firm when breaking, however this does not translate to stoping power, and the ABS does seem to kick in faster, also the pads also wear faster. I would say that if you do not take your car the track just stick to the OEM lines and just upgrade you pads to cermic ones.
I found a good alternative to the Endless brake lines for the s2k. In my search to figure out if the endless lines would fit my 06+ ap2, I came upon spiegler. They are a well known, moto brake line manufacturer. Their lines swivel; they are DOT approved; and they are produced in Europe, but assembled in the USA.
+ayowser01 yeah speigler is amazing. You can buy or have lines custom made by endless by just contacting the company directly and it's about half the cost of buying it through any other place like evasive Motorsports Etc.
this channel is absolutely amazing, he's very knowledgeable and in biased in his reviews and information. He deserves way more subs. I don't know anything about cars but his channel makes me want to learn as much as I can! hopefully all from him!
I agree with Charles Rockwell the only brake line failures I have had are on competition cars with stainless lines. I think the reason lots of people think that their brakes are better after fitting stainless lines is because they have changed the brake fluid and bled the system. I discussed this at length with an engineer from Girling and he would never use stainless lines on a road car. I would however consider fitting nylon coil rubber brake line protectors especially if you drive on unsurfaced or poor roads.
This is great information. Please keep doing these. I'd like to hear about the practical applications of all the common mods, intake, exhaust, springs etc
Great start to the series and much appreciated. I can attest to the benefits of stainless steel brake lines on the track, but they do feel like overkill on the street unless your security depends on limit braking.
Dude. Dude. Keep this shit up. New shop, new equipment, new everything, you're knocking it out of the park. There is a reason why your subscribers love your content. Also glad it moved you guys out of Mark's shop :) He told me about your guy's channel the last time I was in there for service.
All your videos are very informative and helpful to me personally and Im sure to everyone else as well. I have decided not to go with SS lines for my S2000 after watching this video. Thank you always!
100% agree with you 👍🏾 only thing i could add as it relates to liability is the shock load stress then the abs module activities hammering brake system through fluid during its operation.. rubber lines act like accumulators reducing the shock load as the pressure spikes then module pulsates
I've installed SS braided brake hoses on several my family's daily drivers. They get inspected @ every OCI, never had an issue. IMO, An emergency avoidance maneuver on public roads can warrant the same braking confidence that's relied on @ the track.
He described heat buildup in the fluid from repetitive hard breaking as the reason why stainless brake lines will hold their shape better in that hot condition. Built up heat wouldn't apply to a one-time emergency maneuver.
@@lawpenner While I won't doubt that brake fluid temps are consistently higher under track conditions, some moderately spirited driving on the hilly, winding roads of eastern PA can easily stress even the best DOT4 fluids, albeit @ shorter durations.
@@GspeedR love those winding roads on the hills of Pennsylvania. ...Except when I got hit by fog suddenly in the middle of the night, went off the road and ramped off a dirt pile launching my car 4 feet off the ground, then nose diving into the ground and jacking my alignment/suspension. Good memories
Not alot of people really talk about these braided plastic lines wear out very quickly, leak, and come apart at the terminations after all those expansion and contractions wear out the plastic at the termination joints, yes what they call stainless braided lines are basically a plastic like material line, many have had lines severed at the terminations, good for track and feel, doesn't last on the street, these braided lines are dangerous on the street , even if you inspect them you never know when they will shear off at the terminations, rubber hoses are much much more forgiving aka flexible and last basically the life of the car, if only someone came out with super high quality hybrid brake lines without the shearing issues at the terminations.
In 2013 I did z1 motorsports ss brake and clutch lines on my ‘06 350Z. I thought it was a tremendous upgrade. Brakes and clutch really firmed up and felt strong. Put them on my ‘15 Titan in 2018 and had the same experience: nice and firm brakes.
I don't know if you had to redo several takes from forgetting your words or needing to explain something better, but you are incredibly eloquent for the amount of time you spend talking without cutting a shot.
I dont know about ferrari but i work with Airbus and Boeing Aircraft every day, and those have all stainless steel braided brake and hydraulic lines, i would have to dig more on the complete construction of them tough. Also aircraft dont to repetitive continuos braking so that might have to do with it.
Savagegeese has videos just about everyday???? I can die a happy man now. Dude, good work on all of your videos, and the shoppe is sweet. Hurry up and get Scott back on the videos so that my life can be complete.
Agreed. I have two of the same car, one with the stainless lines (among other things), and one without. The difference is obvious even on the commute. It's good information, though, especially since indeed my first set leaked almost immediately, likely do to installation error (had a shop do it). That said, the replacement set has been going strong for six years now.
I always phantasized about if efficiency wasn't a concern in this world, if cars could be made with no rust tendency whatsoever, made for life, and so when I got my racing brake I picked steel brake lines and when they asked me whether the fittings should be anodized aluminum or the slightly heavier and more expensive stainless steel, I didn't even have to think. I also once mounted a header shield and an exhaust system with V4A-80 screws, kind of in protest of seeing mounting parts in extremely rust-prone parts rusting into Swiss cheese themselves. (I do not know whether that material's heat expansion and electrochemical characteristics are fine, though.)
The stainless lines can make a huge difference. If you have a mushy feel, it's a great upgrade. If you don't have a mushy feel, but get brake fade then just get pads and fluid. Aftermarket master cylinders is where the shit is at!
Fair enough explanations. I just have installed them on my type R and I feel not 100% sure about safety. Kinda regret that I have get in to it. Rubber ones would be good enough.
Yamaha recommends replacing motorcycle brake lines (and rebuilding the calipers) every few years. The makers of SS braided lines claim that their products will last the life of the vehicle. In addition, the OEM lines on ABS-equipped machines tend to have a lot of hard steel tubing so the amount of rubber hose is much less and the benefit of aftermarket braided lines (without these sections of hard tubing) is also reduced. I also have concerns that the OEM ABS system is tuned for the dynamic response of rubber hoses and might not perform as designed with braided lines. I wish someone competent would do a video on this application. Too many questions...
Dynamic response? That's where you went wrong. Rubber hoses have a delay believe it or not hence the ABS SYSTEM ASSISTING YOU IN BRAKING BECAUSE IT KNOWS "MY BRAKE LINES CAN'T TAKE THAT PRESSURE SO FAST, SO I'LL HELP PUSH IT"
I've went back and forth on this decision for some time but yeah I don't track my car and am satisfied with the brake pedal feel etc so I will keep my rubber stock lines and when they need replacement I'll replace with another set of rubber stock lines or OE quality rubber ones. Just not worth it to me. One thing on my car (2015 WRX with 107K miles) that improved brake pedal feel was the Perrin master cylinder brace. My brake calipers are 100% stock. I recently had to replace the rear calipers (found a pair of them new) as they were starting to just fail on me and seize up. Replaced along with rotors and pads. Duralast Elite pads and Duralast rotors (smooth surface no slotted/dimpled). I use Dot 5.1 Motul brake fluid.
over 200,000 Highway, City and back road miles on my Russell stainless lines, I have replaced my suspension down to the bushings 3 times, and plenty of other things, but have never had to replace the brake lines, get a good quality set and they will out last rubber lines many times over, as for them getting torn up from hitting something I've seen plenty of rubber lines get ripped and although theoretically the stainless lines can be damaged I have never seen one get taken out by debris
Working as a mechanic for 11 years on many high performance cars and vintage race cars we installed and serviced a lot of flexible stainless brake lines. We installed top brands like Spiegler and Earl's. Many of these brake line installations failed within just a few months. Flexible ends or not, this hardware is not really suitable for everyday street use. There is simply more flex at the line ends than the lines can handle, and the hose ends up splitting close to the end fitting. It is even a problem for race cars. The rubber hoses can tolerate a lot more flex cycles than the stainless hose.
Is it good practice to change the rubber brake lines depending on the cars' age? This is assuming no visual leakage or damage present.
@@kalani1987 it makes sense to change them on old cars, I would not trust them after 15 years or more.
@@kalani1987 I know my motorcycle is not a car but my service manual said to replace brake lines every 4 years.
Interesting. I also work for a high-end repair facility(20+ yrs) but have no experience the brands that you mentioned. I currently have StopTech lines on my Honda and Techna-Fit lines on my daughter's Nissan. Both have DOT approved fittings and have shown no signs of flexing failure. I sold my previous Volvo 240 with IPD lines that endured over 12 years/200k miles. Correct routing is essential and the technician was meticulous during those installs. I would tend to think that any SS braided brake hose that encounters more stress than it's rubber counterpart would be due to a poorly designed/built hose and/or improper routing during installation.
@@GspeedR good to know
This video and the fact that you bothered to time stamp the description are reasons you deserve 1M subs. Go, go, go!
He's smart. Forums where some holy wars are waged debate this sort of "fine print". By giving you those hot links, you can easily copy & paste that into a forum to support an argument/claim, and he gets additional views. Win win.
For sure. It's a great video with good info and feels pretty unbiased.
pretty unbiased video!!!
I put Stainless Steel brake lines on my motorcycle. I simply did it because I found the braking "Feel" to be much better. Very firm levers after installed. Of course part of this could be the fact that I installed new fluid and made sure they were bled to perfection. Nevertheless, they were red. I like red.
BadShadd1 I've put them on almost every motorcycle I've owned. Make the braking great.
Regular maintenance is probably a better investment on such a light vehicle. How often are rubber brake lines supposed to be changed on a bike, and who really does it to that schedule?
I used to do the stainless thing. Then I found that it's really hard to tell the difference between stainless and _new_ rubber lines - but most people are comparing them to the old, worn-out rubber lines that they're replacing. if you're a professional (with a like skill set) or if you're driving off-road a lot, I can see the point. But for spirited driving or the occasional track day - probably not worth the expense.
@@aussiebloke609 I absolutely agree with your on this point, I got my WRX braided brake line replace on my new WRX after 3500kms, same brake fluid, same pads and rotors, nothing firmer or better brake feedback compare to OE new rubber line, only find it change better by investing a bigger rotor, pads and calipers.
I put stainless steel braided brake lines on my motorcycle years ago and I couldn’t believe how much better the braking feel was. I did the same to my car and not much difference. I took the steel braided lines off and put new rubber lines on.
One reason why many people see an improvement in brake pedal feel after upgrading is because they're replacing 15+ year old rubber hoses with brand new lines. They would've felt a difference too with new rubber hoses
Same goes with people talking down on "rubber bushings"..and wanting to put polyurethane bushings in their street car..and saying "those rubber bushings are crap compared to the nice colored poly bushes".They are comparing an old worn out part to a new "upgraded" part...and that automatically means that the original part is "crap."....man.....gotta love the 98percenters ;)
15+ year rubber brake lines AND 15+ year old fluid!!!!!!
I replaced originally with new rubber lines. My peddle feel was still mushy. So I replaced the master cylinder, still mushy. Found a deal on stoptek steel braided lines. (Cost was similar to the rubber lines.) So I picked them up, replaced the front lines. Still mushy, replaced the rears then, no mushy feeling. All new fluid, I replace every year to year and a half, mostly because I want a regular change so I never forget.
I installed ss brake lines on my car just in the front. The brake pedal feel isnt really any different but the braking response is more immediate and responsive
fuckinlowdowndrummer deffinetly not true ..if u track ur car or even street race doing digs.upgrading the bushing is a must to prevent flex.another important part is if ur start making lower and the motor flex u will have shifting issue.these are things that I personally have been through
And that is.... THE FINE PRINT
+TheStraightPipes Yo straight pipes can we collab on a Mitsubishi Mirage Hello Kitty Edition?
savagegeese find one and we'll book the next flight out
I honestly want to know what can be done with that little thing. The driving ergonomics with the manual are surprisingly decent for such as small and cheap car. I'm sure it's not beating Civic Type R, ever, but...
This is a great series, really appreciate the unbiased information
In my opinion...
The main reason is general brake feel, not necessarily during track conditions or from heat of the fluid expanding. The benefits are felt EVERY SINGLE TIME you press the brake pedal, at any speed. The oem rubber lines dont hold the 100's of psi (during even a regular brake application) without deforming slightly, which is felt in pedal feel.
However, many cars have very soft cast brake calipers , that flex significantly as well. If you have basic cast calipers (or non-perfomance street pads with low initial bite), you will still have a spongy pedal feel even with the stainless steel lines, so just save your money.
I agree on the downsides, however.
That spongy feel is the worst. I had mine's installed because of this
Need to change the Brake master cylinder
Man succeeded in scaring the shit outta us that wanted to upgrade to braided stainless steel lines.
Exactly ahahahah
Right, we all looking @ each other like WTF....
One thing I didn't see mentioned also is stainless steel brake lines are also abrasive. Instead of rubber there's a PTFE line in there surrounded by a plastic cover to help prevent the stainless steel sheath from cutting into the line. Add in some road grit and tens of thousands of turns and flexing of the line inside the stainless steel sheath the brake lines are now a limited lifetime wear item. As it's life rubbing a piece of steel wool over the plastic protective cover every time you turn the steering wheel.
Lol 🤣 hell no
Good honest review. I upgraded to SS lines two weeks ago... absolutely no difference on the street.
My experience as well. Huge improvement on my motorcycle though.
Love this new series. I'm really glad you started it. No doubt, you're the most real car RUclipsr I've watched. Your channel is fantastic.
There is another reason for stainless steel brake lines, and that is feel. Knowing what is happening at the pad is another piece of telemetry that I appreciate. You don't need it on the street, but I have them for the feel. Just because you technically don't need them on a street car, doesn't mean you shouldn't use them. If your car is your love and you don't track it, there are better places to spend your money. Its just this guy's opinion from a practical perspective.
SS brake lines also benefit if you do any type of backroad or canyon driving. Fluids don't have to reach boiling point for you to feel the benefit of SS lines.
i use to track my z1000 on oe rubber hose the dual 4 pot tokico works a treat but after a few laps they start to get smoshier not much but the lever seem to go in deeper then when you first start after i replace to earls racing steel lines the braking pefromacne stays consistant troughtout the session for road i say the difference its unlikly to be noticable but when your fluid are hot from constant full braking corner after corner the rubber hose will degrade your performance as the laps piles up but if im honest on the road you barely feel the difference maybe abit of feel but definitly wont shorten your emergency braking distance to be honest
This is me with my personal car in Mexico. Lots of twisty roads in the mountains, especially going downhill.
Very informative, really looking forward to this "fine print" line of videos, glad to see you trying new things with the channel. It's turning into one of my favorite car related RUclips destinations.
The Fine Print series was excellent. I know it isn't an eye magnet but I learned something from every single one of them. Thank you for this content.
youre the only person i can find who tells all useful information wether it is bad or good
This was a perfect "philosophy of use" analysis. Great video!
Rubber it is
Very informative video man, keep up the good work
Would ribbed rubber feel any better ?.
I love your Fine print videos. You go into topics that aren't always well-covered. It's pretty cool. Keep it up
you dont know how long ive waited for this exact video!!! I am rebuilding my 1950 Cadillac and I really was confused on the benefit of steel brake lines !!
Thanks for this. I was considering putting some braided lines on while doing the brake pads, but I think I'll just use some new rubber lines, since the ones on there now are about 12-13 years old. I don't do serious track driving, because I don't really have the spare time or money to get into it. Fundamentally, even though I do like to go fast, it's still just street driving.
Awesome reviews I like how you give the pros and cons to what real world people would go through or deal with.
I'm glad someone is making videos like this with so much misinformation on the internet. I myself have all this stuff too, but like said in the video just know what you are getting yourself into. more maintenance and checking.
Best and honest advise I have ever seen on RUclips so far.
Every word you said is wisdom.Polite,humble,spot on.
Amazing explanation for the pros and cons between each rubber and stainless brake lines!
New segment type is really cool. Loved watching you hold back a smirk when you say the tagline at the end! Keep them coming. This wasn't news to me but I'm sure plenty will have some helpful info, can't wait to see more.
stumbled on this video and it helped me make my decision. I almost went stainless because mine are getting mushy, but glad I did research first
I love my goodridge ss lines. the feel is amazing and adds to performance just because of that. It is very vaulable on the street imo. THe brakes are the most important thing on a car. I will have them on all my cars.
I didn't like the way this guy started slow with a lot of words and wide spaces between them at the first glance, but it it's got all perfectly aligned with the actual information the video was claimed to deliver. I was very pleased to see all of my qustion answered exactly the way they should have been.
Good job!
Very informative...I know little about cars, but can't stop watching this channel. Go SG!
Why am I just now discovering this channel? I've been going through videos; great content. Hope this channel blows up.
Hot brake fluid can't melt steel beams
It was an inside job! ;)
Some planes don't have black box.
can too!
So can jet fuel ⛽️
@@EJL2004 Lol.
Nobody ever talked on the downsides of stainless steel brake lines. Glad you did.
Just subscribed. I watched two of your vids and I must say the channel is excellent with great commentary that includes unbiased impressions and useful technical details.
I just found this video after installing stoptech stainless steel lines in my daily driver 😅
I'm looking into replacing mine on my daily driver. I live in Los Angeles. Believe it or not, I do feel brake fade in the hot summer weather on the rapid stop and go traffic. After replacing yours, can you tell me how the braking feels? Are your brakes wearing faster? What vehicle do you drive?
One last question, do you feel like your ABS kicks in way faster?
I live in LA too, I drive a 2001 toyota celica gt. After installing the lines the brake pedal feels very firm when breaking, however this does not translate to stoping power, and the ABS does seem to kick in faster, also the pads also wear faster. I would say that if you do not take your car the track just stick to the OEM lines and just upgrade you pads to cermic ones.
StopTech ones are DOT approved at least, so no big issues there if you install it right.
Same. Luckily I could only do one side since I stripped the brake line nut on the other (didn't use a flare wrench)
Basically, you don’t need a 4000 dollar suit if you’re working at Del taco..
Lol
Love the frequency and quality of your videos. Thanks for the good content
The word on the street is that turbosky uses stainless steel condoms 👏
+Edgardo Amado He does not use protection.
Scott is going to be the next person to have Chuck Norris-esque jokes created after him... I hope... :-)
Nah the protection isn't for him, if you know what i mean.
I’ll save you some time:
1) Why steel braided brake lines?
• Because they don’t expand. Period.
2) Do you need them for the street?
• No.
I found a good alternative to the Endless brake lines for the s2k. In my search to figure out if the endless lines would fit my 06+ ap2, I came upon spiegler. They are a well known, moto brake line manufacturer. Their lines swivel; they are DOT approved; and they are produced in Europe, but assembled in the USA.
+ayowser01 yeah speigler is amazing. You can buy or have lines custom made by endless by just contacting the company directly and it's about half the cost of buying it through any other place like evasive Motorsports Etc.
savagegeese good info. I guess if my Spiegler lines ever need replacing I know who to contact next.
Do they make them for Ford Excursion ?
this channel is absolutely amazing, he's very knowledgeable and in biased in his reviews and information. He deserves way more subs. I don't know anything about cars but his channel makes me want to learn as much as I can! hopefully all from him!
I agree with Charles Rockwell the only brake line failures I have had are on competition cars with stainless lines. I think the reason lots of people think that their brakes are better after fitting stainless lines is because they have changed the brake fluid and bled the system. I discussed this at length with an engineer from Girling and he would never use stainless lines on a road car. I would however consider fitting nylon coil rubber brake line protectors especially if you drive on unsurfaced or poor roads.
Great vid saved me some money that I was gonna waste while upgrading my braking components thank you! Very informative
This is great information. Please keep doing these. I'd like to hear about the practical applications of all the common mods, intake, exhaust, springs etc
Sweet lord, legit information in a consumable package. Very nice video as per usual.
I'm liking this Fine Print series, some bad always comes with the good.
Great start to the series and much appreciated. I can attest to the benefits of stainless steel brake lines on the track, but they do feel like overkill on the street unless your security depends on limit braking.
Great start to this series! Looking forward to the following videos.
Dude. Dude. Keep this shit up. New shop, new equipment, new everything, you're knocking it out of the park. There is a reason why your subscribers love your content.
Also glad it moved you guys out of Mark's shop :) He told me about your guy's channel the last time I was in there for service.
+lowstrife Thanks, yeah its more flexible now in terms of content creation. So we shall see. Gotta get scott in for some action.
Mr. Turbo did a shitty job working on my car so I'm sure he'll continue to do an equally shitty job in your videos
lowstrife Which junk is that?
imgur.com/a/be8UZ
lowstrife Mr. Goose had one of those.
Honest reviews are always the best!!!! Keep the honesty and great job!! Thank you Sir!
All your videos are very informative and helpful to me personally and Im sure to everyone else as well. I have decided not to go with SS lines for my S2000 after watching this video. Thank you always!
Fantastic video. Very educational, great visuals and clean down to the point understanding. Thanks!
Please keep this series going. This is great. Thank you
Very informative - thanks for the thorough, no BS explanation!
Great job! You could make a part 2 about race brake fluid and pads?
100% agree with you 👍🏾 only thing i could add as it relates to liability is the shock load stress then the abs module activities hammering brake system through fluid during its operation.. rubber lines act like accumulators reducing the shock load as the pressure spikes then module pulsates
I've installed SS braided brake hoses on several my family's daily drivers. They get inspected @ every OCI, never had an issue. IMO, An emergency avoidance maneuver on public roads can warrant the same braking confidence that's relied on @ the track.
He described heat buildup in the fluid from repetitive hard breaking as the reason why stainless brake lines will hold their shape better in that hot condition. Built up heat wouldn't apply to a one-time emergency maneuver.
@@lawpenner While I won't doubt that brake fluid temps are consistently higher under track conditions, some moderately spirited driving on the hilly, winding roads of eastern PA can easily stress even the best DOT4 fluids, albeit @ shorter durations.
@@GspeedR love those winding roads on the hills of Pennsylvania. ...Except when I got hit by fog suddenly in the middle of the night, went off the road and ramped off a dirt pile launching my car 4 feet off the ground, then nose diving into the ground and jacking my alignment/suspension. Good memories
These series are great by the way. Please go on!
Not alot of people really talk about these braided plastic lines wear out very quickly, leak, and come apart at the terminations after all those expansion and contractions wear out the plastic at the termination joints, yes what they call stainless braided lines are basically a plastic like material line, many have had lines severed at the terminations, good for track and feel, doesn't last on the street, these braided lines are dangerous on the street , even if you inspect them you never know when they will shear off at the terminations, rubber hoses are much much more forgiving aka flexible and last basically the life of the car, if only someone came out with super high quality hybrid brake lines without the shearing issues at the terminations.
In 2013 I did z1 motorsports ss brake and clutch lines on my ‘06 350Z. I thought it was a tremendous upgrade. Brakes and clutch really firmed up and felt strong. Put them on my ‘15 Titan in 2018 and had the same experience: nice and firm brakes.
Thank you. Great info. Level headed & honest. No hype no bias
My stainless lines been on my car for 4 years no problems. It's a street and track car. I think it comes down to maintenance.
Same.... I swear you feel a difference/ it's more important with no abs and a lightweight car
How does one '' maintain'' a stainless steel brake line?
I'm trying to find out what company / brand is best to buy for my Ford Excursion. What did You use ? Or what is Best ?
I don't know if you had to redo several takes from forgetting your words or needing to explain something better, but you are incredibly eloquent for the amount of time you spend talking without cutting a shot.
I dont know about ferrari but i work with Airbus and Boeing Aircraft every day, and those have all stainless steel braided brake and hydraulic lines, i would have to dig more on the complete construction of them tough. Also aircraft dont to repetitive continuos braking so that might have to do with it.
Informative and a great asset to the enthusiast. Keep up the great work!!
Very timely watch for me. Getting a quote on a brake upgrade today.
Excellent! I'm a big fan of The Fine Print.
Loving the new series!
I like the new series, my favorite part of this channel is the no Bullshit approach, keep up the good videos👍👍
Love this series! Keep it up savagegeese !!!
well explained. helped me make a decision to not the replace the rubber brake lines on my wrx and avoid the extra cost.
I wanted to invest in some stainless steel brake lines but now it just seems pointless unless I would be on the track ... thanks for the info Geese!!!
Love it, pro/cons and straight to the point!
Id say one thing; your 100% on point
Savagegeese you and engineering explained should do a track day competition with the S2000's!
+Be_Easy yeah that would probably be a fun time.
Savagegeese has videos just about everyday???? I can die a happy man now. Dude, good work on all of your videos, and the shoppe is sweet. Hurry up and get Scott back on the videos so that my life can be complete.
Madeline, as do I. His rye sense of humor goes perfectly with the videos he's in.
I really like how they make the brake pedal feel as well. The pedal feels a lot stiffer, and makes me more confident in my car.
Agreed. I have two of the same car, one with the stainless lines (among other things), and one without. The difference is obvious even on the commute. It's good information, though, especially since indeed my first set leaked almost immediately, likely do to installation error (had a shop do it). That said, the replacement set has been going strong for six years now.
Another top video dude, keep up the good work.
Bravo. Great information here & looking forward to more fine print videos.
I always phantasized about if efficiency wasn't a concern in this world, if cars could be made with no rust tendency whatsoever, made for life, and so when I got my racing brake I picked steel brake lines and when they asked me whether the fittings should be anodized aluminum or the slightly heavier and more expensive stainless steel, I didn't even have to think.
I also once mounted a header shield and an exhaust system with V4A-80 screws, kind of in protest of seeing mounting parts in extremely rust-prone parts rusting into Swiss cheese themselves. (I do not know whether that material's heat expansion and electrochemical characteristics are fine, though.)
@4:24 Rubber, unlike many other materials, constricts when heated and expands when cooled.
Excellent explanation and a good watch. Much appreciated!
The stainless lines can make a huge difference. If you have a mushy feel, it's a great upgrade. If you don't have a mushy feel, but get brake fade then just get pads and fluid. Aftermarket master cylinders is where the shit is at!
MotoBoy there aren't many aftermarket cylinders on offer unless you want a full race car (Tilton). It's not exactly like the moto world.
ayowser01 aah good to see ya princess
Fair enough explanations. I just have installed them on my type R and I feel not 100% sure about safety. Kinda regret that I have get in to it. Rubber ones would be good enough.
Keep these videos coming! So much great info
Yamaha recommends replacing motorcycle brake lines (and rebuilding the calipers) every few years. The makers of SS braided lines claim that their products will last the life of the vehicle. In addition, the OEM lines on ABS-equipped machines tend to have a lot of hard steel tubing so the amount of rubber hose is much less and the benefit of aftermarket braided lines (without these sections of hard tubing) is also reduced. I also have concerns that the OEM ABS system is tuned for the dynamic response of rubber hoses and might not perform as designed with braided lines. I wish someone competent would do a video on this application. Too many questions...
Dynamic response? That's where you went wrong. Rubber hoses have a delay believe it or not hence the ABS SYSTEM ASSISTING YOU IN BRAKING BECAUSE IT KNOWS "MY BRAKE LINES CAN'T TAKE THAT PRESSURE SO FAST, SO I'LL HELP PUSH IT"
I love your production quality!
I was curious about this «upgrade», turns out I'll stick to rubber hoses for now! Thank you!
Great video, and 2 videos in 2 days, nice.
Great video, quick concise and right!
I was thinking of doing this to my M4 Comp. Not a fan of the OEM brakes. Thanks for steering me in the right direction.
I have Goodridge stainless breake lines on my S13(200SX) more than 4 years now. No problems. I just inspect them every time I change disc pads.
Goodridge are good lines. Good job keeping an eye on them.
Great PSA! As a bike guy I'd like to add that (coated) steel lines just look better than rubber ones. It's the sole reason why I use them.
Very informative. Like this vein of videos. Keep up the good work.
I like this new series... Keep em up
Concise, brilliant, and to the point!
How could you possibly dislike this video?!
It made a ton of difference on my klr 650 because the line was 1.3m long and old. It was a big upgrade
I've went back and forth on this decision for some time but yeah I don't track my car and am satisfied with the brake pedal feel etc so I will keep my rubber stock lines and when they need replacement I'll replace with another set of rubber stock lines or OE quality rubber ones. Just not worth it to me.
One thing on my car (2015 WRX with 107K miles) that improved brake pedal feel was the Perrin master cylinder brace. My brake calipers are 100% stock. I recently had to replace the rear calipers (found a pair of them new) as they were starting to just fail on me and seize up. Replaced along with rotors and pads. Duralast Elite pads and Duralast rotors (smooth surface no slotted/dimpled). I use Dot 5.1 Motul brake fluid.
over 200,000 Highway, City and back road miles on my Russell stainless lines, I have replaced my suspension down to the bushings 3 times, and plenty of other things, but have never had to replace the brake lines, get a good quality set and they will out last rubber lines many times over, as for them getting torn up from hitting something I've seen plenty of rubber lines get ripped and although theoretically the stainless lines can be damaged I have never seen one get taken out by debris