Install Flat Free Tires on Husqvarna Yard Tractor
HTML-код
- Опубликовано: 24 июл 2024
- Tired of fighting flat front tires on your yard tractor? I've managed to puncture one of the front tires on my Husqvarna YTH22V46 yard tractor and I'm tired of it leaking down and going flat. So, I bought two Marathon Flat Free 15x6.5/6 tires. These tires are foam filled, so they will not go flat. I'll show you how to replace your tires with these Flat Free tires and you can stop hassling with flat tires too!
My affiliate link to buy these tires: amzn.to/3z2c2y4
Tools I use in my shop (some link may be affiliate links):
TABLESAW: Porter Cable PCB-270TS
MITER SAW: DeWalt DWS779S amzn.to/2K7Su5x
PLANER: Porter Cable PC-305TP amzn.to/2WoHT8j
DUST COLLECTOR: JET DC-650 amzn.to/2I4tOZA
BISCUIT JOINER: Porter Cable 557 Plate Joiner amzn.to/2IrCiJj
ROUTERS: Bosch 1617EVSPK 2.25hp amzn.to/2WwGCkb
Craftsman Fixed-Base 2hp Router
Craftsman Fixed-Base 1hp Router
CORDLESS DRILL and Driver: BOSTITCH BTCK410L2 18V Lithium 2-Tool Combo Kit amzn.to/2XAytaU
WELDER: Hobart 500559 Handler 140 MIG Welder amzn.to/2WrCLAe
GRINDER: DELTA GR150 6-Inch Bench Grinder with Lamp amzn.to/2WWA4Lc
HANDHELD ANGLE GRINDER: Ryobi AG402 4 1/2"
SCROLL SAW: Delta Scroll Saw- 16" Variable Speed- Model 40-540
RADIAL ARM SAW: Craftsman 10"
JOINTER: Craftsman 6-1/8" Jointer/Planer, Model#113.12163
DRILL PRESS: Delta DP-350 Benchtop
CIRCULAR SAW: SKIL 7-1/4" Circular Saw
BELT & DISK SANDER: Central Machinery 6" disc
BELT SANDER: Central Machinery® 4 in. x 36 in. Belt/6 in. Disc Sander
Nail Remover: amzn.to/2XxSmzq
Multi-Tool: amzn.to/2Xu3TQl 
Авто/Мото
Thanks Dennis! Your videos are a God-send to guys like me who got bypassed on the " lets give him mechanical ability" train! All God's Very Best 4 U & Thanks again!
Thanks for watching, Dave! And thank you so much for the kind comment!
A million thanks for this video and your clear, calm encouragement. This stuff isn't as hard as one would think (though getting that dust cap on and off was the absolute worst!). The tires were $59.99 each today, but the job took me only about an hour, maybe hour and a half - and I've never done anything like this before. Completely worth doing - the tractor sits better and steers better now that it's not on perpetually under-inflated tires (they were the leakiest tires I've ever seen).
You've inspired me - I've ordered the parts to change the oil and filter, change and gap the plug (I've done this on a car, so should be simple), change the blades, and change out the air filter set. Oh, and I have to put one of the gauge wheels back on once I get a new nut and washer. At the same time, the whole thing is getting a thorough cleaning, and I'm greasing all of the fittings. The ex-husband didn't take very good care of anything, so I have my work cut out for me. I know your Huskie mower maintenance videos will be there to walk me through it all. Again, a million thanks!
Xirena, thank you so much for watching and for your kind comments! I'm so glad these videos are helpful....sounds like you are off to a great start getting your mower back in shape! nice work!! I agree, I hate getting dust caps off....too much pressure, you crush them, not enough, you slip off and bust a knuckle. LOL. Thank you again for your support!
Just purchased 2 of these tires, very easy to install. So glad I came across your video. Perfect timing, couldn’t even keep my old tires up with slime any longer. Only problem I had was reinstalling the two dust covers over the washers. It’s like they shrunk. Again Dennis, your video is much appreciated
Thanks for watching, Tom! Yes sir, those dust caps make me fuss every time I mess with them.
I actually bought this mower today. After reading a lot of review online I decided to check out RUclips. Saw your video where you showed your yard and what you mow. That sold me on it. And now I done watched all your videos lol. Thanks man.
Awesome Justin! Thanks for watching my videos. I hope you like your tractor as much as I've enjoyed mine.
Dennis, I just wanted to thank you for all of the videos you've made about your Husky lawn tractor. Thanks to you I've been able to change my blades, change my oil & filter, and replace my spark plugs. Yesterday one of my front tires went flat, so i visited Northern tool for the very first time and picked up 2 foam filled tires. These tires are amazing. It feels like I have power steering now. I'm not at all mechanically inclined, and usually took my mowers in for service in the past. The next time I need to change my oil, I'm going to replace the drain spout with the pipes you suggested in another video. Thanks again!
That is all so good to hear! I'm happy that all these vids have been helpful. If you do the oil drain plug mod, I recommend using galvanized pipe. Its a touch more expensive, but the black pipe I used rusts quickly. It doesn't hurt anything, just looks bad. Thanks so much for watching and supporting my channel!
Thanks, Dennis I ordered my tires today. Love your site easy to understand. Thanks again.
Thanks for watching, Rick! I hope you like those tires.....I love mine.
Had my Husky Lawn Tractor 2 years now and have been dealing with numerous flats on the front from small pieces of cedar. I didn't even know these tires existed but I'm buying some from Northern Tool. Thanks for the information.
Thanks for watching, George! I've enjoyed having these flat-frees on mine. Thye ride fine and are a lot less maintenance.
What a great video! I am visually imaired and have trouble doing household repairs. This video does an excellent job of filming and explaining. Thank you!
I'm glad this helps! Thanks for watching, Fran!
Thank you for all the information and tutorial I was having problems replacing my tires on mine. So thank you.
Thank you for watching Chastity! I'm glad the video helped.
I went there too and got 2 of em and they on sale this week🙌🏽 so I caught it at the right time
That's fantastic! A surprise Sale on something you're buying anyway is always great. Thanks for watching!
Dennis Coffey. Thank you so much for all the information about this tractor and all the videos, have been great.
Thank you for watching, William!
Thank you, Just picked up two flat free front wheels around $60 each now Northern Tools. And 10% off military discount. Looks like a great tire. Again thank you all your help.
Good deal! Thanks for watching, Tony!
Was at Northern Tool today. I was impressed with the tires. The ones you got look great. Good tread. I have seen the flexible spoke ones on John Deere zero turn mowers. The weight is supported by the top spokes. I some times get several Thornes in a few hours of mowing.
Thnaks for watching, Ralph! My tires have held up really well for the last few seasons. No complaints, I'm glad I put them on the tractor.
Great video! the tires are now $78.00 each. i changed from the bushings to bearings on my front wheels on my ride on mower. :)
Thank you for watching, Warren! Going to bearings is a great idea!
I enjoyed learning about the new tires. I'm going to check them out. Thank you
Thank you for watching, Darcel!
I appreciate you brother. I maintain and fix my own tractor thanks to you
Fantastic! Thanks for watching!
Thanks so much for the information. Nice and slow how to take clip off and explain why the tire is used. The grease zert information is also wonderful. My brother was to do this but you saved the day.
Thanks for watching, Denise! I'm glad the vid helped!!
OMG, I found out a Northern Tool store is just next county over. New favorite store.
Thank you for posting. We had no idea that run flat tires existed for lawn tractors. Picked up two from Northern Tool ($44.99 each) and installed them quickly. The trick to reinserting the black wheel cap is to rock it back in forth to slowly get it up, and then suction just grabs it back into place. My husband couldn't be happier. I had no idea that he had to constantly fill the tires with air on our Husqvarna lawn tractor. Those tires were crap. These ride great.
Thank you Dianne! I love these no-flat tires too. I appreciate you watching!!
Dianne, thank you for your input on how to reinstall the black dust caps. I just replaced the 2 front tires with flat free tires and gave up on the caps. I’ll follow your tip, thanks
Great video. I just wish I had realized I could get the flat free tires because the ones you ordered from Marathon cost the same as the original pneumatic tires. My place is "infested" with the thorns from mesquite trees and it seems everything is attracted to these dern tires. Just replaced all 4 and next time, I will buy the flat free variety. Thanks for the info on inserting that e clip. I have fought those little buggers and made a cussing episode out of it each time the wheel is removed. Now, using the needle nose pliers, it will be easier. Also helpful is showing how to grease the axle. I inherited this YTH 24v48 tractor and while I sorely needed it, I had no experience with anything other than a simple push mower. Moved to the country...it's a whole different deal, must have this kind of mower. But I have a lot to learn and am so glad you have several videos. I just hope the Husquvarna is something I will be happy with, it's not going to be possible to go with another brand, this one will have to be maintained as much as possible by me. Again....thanks
Thank you for watching! I have several videos on this Husqvarna, so be sure to check them all out....hopefully you will find some useful tips! We don't have mesquite where I live, but I have heard the thorns are like nails. I wish I had a flat free alternative for the rear tires, but I haven't found one yet. Thanks again,. I really appreciate your support!
Tubes my friend. Worked for me. Plus green slime if ever flat again. 700 hrs and still same outter tires on. :-)
Nice video easy to watch and to the point. I had no idea what held the tire on. Now I know that they make flat free tires LOL
Thank you very much for watching!
Another GREAT video. Thank you Dennis. I wish you were my neighbor. My neighbor can't even use a watering can and asks me for favors all the time 🤣
LOL! Thanks Dave! I appreciate you watching!
Thanks! I think I'm going to try these on my JD 130. I have issues with flats all the time.
Thanks for watching! I've been really happy with them since putting them on my tractor.
Great informative video Dennis. Thanks. I was really set on getting some airless tires for my Troy-Bilt. Then, I saw the price on the size front wheels my mower uses. Dang! I ended up getting some TireJect tire seal for now instead. So far the tires are holding up.
That will still be better than the factory tires with just air in them. Thanks for watching, Art!
Wow man you make this look as easy as 123, thanks for posting, I'm going to work on my Husqvarna without fear thanks to your instructional expertise.
Thank you very much! I appreciate you watching!
Great job, my Craftsman T1200 is in it's 4th season.. tires still look good.
Thanks for watching, Steve. That's great...I've had similar results with my tires. I love them!
Love your videos. Clear and precise. Very informative.
Thanks again for watching, Randy! I appreciate your support!
Hint for dust cap that is too small/shrinks/won’t fit back onto the wheel. Can stretch it out by pouring very hot water over it and stretching out the inside. For me it was still hard work to get it back on, but at least it had more elasticity. Thank you very much, this video helped me a lot 🙏🏼
Thank you for watching! I'm not sure if hot water would soften it enough to make it fit easier, but it would sure be worth a try!
Heat the grease caps with a heatgun until soft enough....
I ordered these tires through Amazon. Cheaper and shipped faster then Norther Tool. Wish I would have gotten these tires a couple years ago. The ride is the same and they were easy to swap out.
Thanks for watching! Yes, I love having these tires on mine and not worrying about flats anymore!
I truly like watching your videos. You show each step and answer all my questions as you go. Any advice on replacing the back tires? I ordered some new tires due to a puncture. I am thankful I bought 2 back tires at the same time because the size was right but the shape was different than the original. (I am sure I missed something specific when I ordered of the website.) I have the same model Husqvarna. Thanks for all your awesome videos!
Thank you for watching! I have not replaced the rear tires on this mower myself. Usually, you can take the numbers off the side of the stock tires, and buy the same by matching those numbers. It should be a 20 x 8 turf tire. It will look a little different deflated than it does on the wheel and inflated.
I followed your advice. The store only had one tire. So thinking they were the same size I replace the left front tire. After about two hours of mowing a belt broke. Then my wife noticed the tires were not the same size. The new tire was shorter. I bought a marathon flat free tire 15x6.5/6 . The tire on the mower was a 15x6/6. Checked Husqvarna website and this was the right tire for the yth 22v46. Seems like a 6.5 should have been bigger than a 6 but it was not. Lesson here check size on tire and replace both.
I've had a few people say that the OEM Husqvarna tires were off-size....so I'm thinking maybe all the tires of this type are not always sized exactly as claimed. You have a good point...always check the size, and preferably always replace them in pairs. Thanks for watching Ron and thanks for your comments!
thanks for the video. Just bought 2!
Thanks for watching, Huy!
You're video was very helpful thank you so much it explained everything that I had questions about
Thanks for watching! And thanks for the kind comment!
Thanks for this info. I'm gonna order a set and install.
I love mine, beats putting air in them every time I have to cut grass! Thanks for watching!
I wondered how those hard front tires worked … thanks for this video … !
Thanks for watching, Richard! I love these tires...so nice to not have to fix flats!
@@dwcoffey - what about the back ones do you know of anyone who sells them solid also?
I finally got them but I had to pick them up at the store but I am satisfied with them and no more flat tires
Thanks for watching, Adam! Yes sir....no more having to put air in the tires every time you cut the grass! LOL! I love these tires on my tractor. Thanks again!
That's a good idea. I pump my up once per month. All four. What a pain.
Thanks for watching, San!
Thank you, keep making your video's.
Thank you very much, Rick!
Hi Dennis, I want to get a set of these, since it's been a while for you now, I(we) would like to know how happy you are with them, pros & cons, & would you recommend putting the front end on blocks to prevent flat spots from forming when not in use? I read about people complaining about flat spots on garden carts, hand trucks, gegerators & stuff like that. & thanx again for your great tutorials, don't stop, you're a great help...
Thanks for watching, Robert! I haven't had any problems with the tires or with flat spots. Now I live in the South, so the longest period of time my mower sits without moving is probably 3 months. In those 3 month periods, I have not flat spots occur. I'd buy these tires again, for sure.
Good video. I haven't had a flat on my Husqvarna lgt 2554 in 10 year's ( knock on wood, lol). Of course, all I do with it is cut my grass.
Thank you for watching, John! Seems some people have had a lot of trouble with the front tires on these mowers, and some do not. I wonder if Husqvarna had a bad batch, or used two different suppliers maybe. Anyway, glad you haven't had tire troubles!
I'm new one at RUclips, Fist time to get so great video, Thanks very much.
Thank you Eric!! I appreciate you watching!
Good instructional video thanks for posting
Thank you very much for watching!
I live in Kansas City. Fortunately we have a company that will foam fill tires. After going to the tire shop a minimum of 4-5 times every year for leaking tires I did this. Cost paid for itself within the first year.
Thanks for watching, Will! We've used a company here in Georgia at my job to foam-fill forklift tires, but it's really expensive. If it wasn't, I'd get the rear tires foam-filled too!
I'm in Lawrence. Where do you get this done at?
@@angeldew77 T&W Tires Front st kc mo,. Should also have site in ks
Awesome. Thanks I'll check that one out since I'm only a lil over an hour from there.
THANKS DENNY GOOD JOB AS ALWAYS!!!!!!!!!!!
Thank you very much for watching!! I appreciate it!
Great idea ... mine lose air every 4 weeks. I think I'll give it a try.
Thanks for watching! Mine were doing the same....I love the flat-free tires.
Thanks, Just ordered..
Thank you for watching, Charles! I've been running mine for a few years and they are holding up really well.
About to do the same thing to mine! I have the same mower, and the factory tires are CRAP... I've already changed out the back ones to heavier 4 ply.
Thanks for watching! I like these no-flat front tires a lot. Thankfully, I haven't had any problems with my rear tires. I do have mine full of water for weight though.
Higher price at Northern Tools now though as they now run $69.00, plus tax. Years back, I had a fellow do all 4 or his tires filled with foam, locally. He said he regretted doing that later, as it ran so very rough of a ride afterwards. We had any multitude of mesquite trees, so flats were par for the course when I lived in that area. Of course, this was from a local shop, so not sure how they actually filled them. I suppose the company does a better job of somehow balancing the foam they use inside the tires these days. Nice video.
Thanks for watching and for the nice comment, James! These ride almost the same as the original pneumatic tires to me. Now if the rears were foam-filled, I suspect the ride might not be so nice. :)
Thanks again!
Great introduction on the few of your vids that I’ve watched - I just ran across your channel.
What’s with ur bushings @ 2.23???? The hub looks like it’s a whoopsie ride from non existent bushings? They couldn’t have worn that much.
I replaced the axle and steering spindle bushings with roller bearings (cheap kits) on my old Poulan but of course they fit all AYP tractors.
Great resource!.
I think the original bushing was completely worn out and gone, as I had a lot of fines in the hub. Roller bearings would be the way to go for sure! Thank you for watching!
Great video thanks JEZ
Thank you for watching!
Nice work!
Thank you for watching!
It's true, you don't have to worry about getting a flat tire. However, they are stiff and you will not get a smooth ride over bumpy ground.
I haven't noticed too much difference in the ride, but my yard is pretty bumpy, so maybe I wouldn't notice. Thanks for watching!
Dennis, love your video's. I have a TS146 XD Husqvqrnq, which I think is pretty similar to yours, however my tires say 15x6 006. I've looked for Flat Free tires, but haven't found an exact match. Do you know of a flat free that might fit my tractor? And what exactly is the "006" designation?
Thanks for watching, Larry! The tire designation reads like this: 15x6.00-6 - 15" is the tire's outer diameter when not under load. the second number is actually 6.00, that is the tire's width. The last number, "-6" is the width of the rim. So, a 15x6.50-6 should fit your mower fine. The tire itself will be 1/2" wider, but the rim width is the same. Before ordering, I'd check to be sure that at the turning extremes, your factory tires don't come within a 1/2" of hitting anywhere. If not, you should still have clearance with the 15x6.50-6 tires.
Thanks Dennis. I was able to change the flat tire of my husqvarna with your video. However when I start my lawnmower first time after winter break, it produces way too much smoke. Do you have a way to fix that? May be carburetor or air filter cleaning video you may have?
Thank you for watching! Without knowing the particulars on your mower, it is hard to say for sure, but I would guess your mower just needs a tune-up. I have some videos to help with that:
Change the spark plugs: ruclips.net/video/nqPFY-2LfhE/видео.html
Change the air filter: ruclips.net/video/LiiaxutYyFA/видео.html
And you may need to change the oil: ruclips.net/video/8PsfLKmpElU/видео.html
Let me know if I can help!
Your system makes sense. The Slime turns to dirt. The gap fill foam doesn't hold up. I have two 8 inch boat trailer tires that were foam filled by a tire shop that does construction equipment. They are heavy but will work on my lawn tractor. They are for a 1 inch axle. Need to adapt them to a 3/4 inch. I have Slime tubes with Slime in them now. Slime tubes are no good. If I have to remove the tubes and patch them why would I deal with Slime. I have a Thorne problem. I might pick up a half dozen in a day. I have Chevrolet wheels on the rear
For some reason the thicker tires dont pick up Thornes so easily.
Thank you for watching, Ralph! Fortunately we don't get a lot of heavy thorns in my area. The factory front tires would never hold up to large thorns. These flat free tires are holding up well and don't give me any trouble. I like the idea of putting car tires on the rear wheels....never thought of that, but sounds like a great idea! What size are your rear tires?
Do they have that type of tire for the rear??? Are the new tires cutting up the lawn more then original tires??
Great video very helpful thank you....
Hi Danny, thanks for watching! I have not found any flat free rear tires. These tries actually seem to be a little easier on my turf than the factory pneumatic tires. I have mostly centipede in the lawn, but have had no problem with these tires damaging the grass.
Dennis Coffey thank you for your help,
Great video. Can you get these for the back ? I just ordered via your link two for the front of mine .
Thank you for watching! I've never seen the drive tires in a solid tire. I'd get them for sure, if I could find them!
Thank you!
Thanks for watching, Desiree!
Hey Dennis, enjoyed the video. Got to have a new tire on my mower...was wondering, how did the tires hold up..how did the tread hold up?
Hey Neal, thanks for watching! These tires are still going strong. No problems and excellent tread wear for me.
I used that slime. It works fine for me.
Thanks for watching, Bob! I used it for a while and I had pretty good success with it too. I still had problems with the fronts leaking down a couple of years after putting slime in them. that's how I ended up wanting these never-flats.
i am headed to get some flat free after 3 flats i am tired of plugging them as well
I'm glad I got mine and have never looked back! Thanks for watching!
Challenge: take a shot every time he says marathon.
Great video
LOL! That would turn this into a 2-day job! haha
damn... I replaced the tire and inner tub on Monday. For the back tire. It only had one washer.
I have not found any flat-free rear tires. Thanks for watching, Angel!
Hi Dennis! Thank you so much for your tutorials. They have been very handy for us as we are learning to maintain our family's first riding mower. At the 3:23 mark, you mentioned the back cap that is fixed on the axel. That appears to be where our problem is. It has broken loose at some point and after greasing all the points you mentioned in your other video, we just realized the squeaking is coming from the inside of the tire or rim rubbing against the other metal part of the axel. Is that back cap something that we can replace ourselves or do we need to call for someone to service/re-weld it for us? Any thoughts would be greatly appreciated. I'd hate to damage our mower by continuing to use it while this is broken.
Hi Jenni, thank you for watching! I'm glad my videos are helping y'all with your mower...that's great! You could have somebody weld the back-cap onto the axle, or replace the axle itself. I think either way would take care of the problem. The axles are fairly cheap (I think they run about $15-$20 each). I'm going to do a video soon showing how to replace the front axles....but it probably won't be up soon enough to help you. Basically, you detach the tie rod, knock out the e-clip on top of the axle, then slip the axle out of the bottom and replace in reverse.
@@dwcoffey Thanks so much! If they're fairly cheap, we'll pay someone to just replace them. I was guessing we were in for a super expense repair when I saw it. Thanks again! Keep up the great work!
Hi Dennis, I started watching your videos in 2020 when I purchased the same Husqvarna riding lawn mower that you have in these videos. I was wondering, since you made this video, if you ended up purchasing flat free tires for the rear tires. I have been having trouble with one of my rear tires going flat since day 1. But, I can't seem to find the correct size flat free tires for the rear, at least not on Amazon. I think the spec says 20x8-8
Thanks for watching! I have not found any good alternative for flat-free rear tires. I know there are some companies out there that will foam-fill ag tractor tires and they'd probably do these, but the process is pretty expensive, so I haven't looked into it any further.
Is there a difference in how it rides ? Rough , smooth?
I replaced the rear with the tougher gauge thicker tires . But didn’t with the front . Now I have flats on the front ...
Thanks for watching, Alberto. I don't notice any difference at all on turf, dirt or in the woods. On concrete, these tires might ride a slight bit rougher, but not enough to bother me.
Hi, thank you. Did you have to put air in those tires?
Thanks for watching, Sandra! No air is required in these tires, they are filled with some type of foam that eliminates the need for air and also eliminates the possibility of going flat.
Unfortunately Marathon doesn't make a 16 x 8.00-8. I'd love to replace all 4 tires on my Huskee LT4200 with flat free tires.
Thanks for watching Will! I agree...I'd love to replace the rears with flat free tires and then put some weights in the wheels.
Denny, did you also change the back tires to flat free? What would be the effect of doing that? I have a lot of black-thorn locust trees on my property and find that I am fixing tires all the time.
Hi Warren, I did not change the rears out to flat-free tires. I keep water/anti-freeze in my rear tires for added weight. I've not had any trouble with my rear tires, but with blackthorns, I am not surprised you have trouble keeping your rear tires filled. That's got to be a challenge!
Dennis what about going from 15x6.5-8 tire to a 15x6.5-6 tire. Will I have to adjust my deck? If so could you send me a link for that video? Thanks in advance Bro.
Thanks for watching, Myron! I think you could use that size tire, but you are right, it will lower the cutting height of your deck. The deck on these mowers can only be adjusted from one side for leveling, but they can't be lifted higher than the highest cutting height setting, so....I'd be afraid that with the smaller front tires, your cutting height would be too low. Here's the video for leveling the deck: ruclips.net/video/EL2wU1v5NvM/видео.html
Good video. I am going to check them out. What air pressure do they compare to the old tires
Thanks for watching! They don't take air they are solid tires.
@@dwcoffey I did not word my question very well. How much air would you have to put in the old tires to have the same feel as the new flat free that do not require air.
Oh I see....Husqvarna calls for 15psi in the fronts, as I recall. These tires are just a touch stiffer than the factory tires, so I'd say if the factory fronts are at 17-18psi, that would be about the same as these.
Good video. Here's my issue. I ordered two Marathon tire / wheel combos for my front axels. 15x6.5, stamped right on the side. Then I noticed they looked smaller than my oem tires. New ones were about 13.5 in diameter compared to the true 15 of my old worn tires. Since then I've checked tires at Lowes and Amazon. Lowes were about 14". People on Amazon were complaining that they had the same issue with other brands. Could Ii just try 16 inch tire / wheel combination? Were your tires accurately sized?
Thanks for watching, Dan! My tires were accurately sized...they may have been 1/2" difference at most. With as much difference as you are seeing, I'd think a 16" tire would be worth a try.
What size tire goes on the back ?? I have a Husqvarna lawn mower yth22v46
Thanks for watching! Rear tires are 20x8
Do these wheels develop flat spots when the tractor sits during the winter off season? i was planning to get a pair for my 2016 John Deere X350 22 hp Kawasaki Fc600V v twin motor. its a typical 15 X 6-6 tire found on these consumer residential lawn tractors and dump carts.
Thanks for watching, Derek! No sir, I haven't had any flat spots or issues with these tires. I'm still running them (almost 4 years) and am still happy with them.
Question here:
I saw this video before - maybe about a year ago or so,,, After many tire repairs due to thorns and now a broken wheel due to my making repeated full tight turns, ( I broke one; although, I not NEED to get new front tires... The Marathon flat free tires ore even more $ ... However, the reason that I'm writing this is because it now looks lie they do NOT come with the grease zerk fitting. Mt tires are the 8" rather that the easier to find 6" inch... Do you think that the NO grease fitting ones will still be okay if I just grease the shaft and the hub as I install them? ... Thanks, Chris Caliber Asked on 8_16-2020
Thanks for watching, Chris! I think they will be ok if you periodically take the wheels off and grease the axles and hubs. You could also look at how your hubs are made and how the bushings are installed. You may be able to drill the hubs and install zerk fittings.
I can not remove the E ring. Any tips on how to get it off. I do not see well, so i am looking for some help. Thanks
Hi Fran, sometimes you can get a small slotted screwdriver between the back of the clip and the axle, then pry it off, just cover it with a rag or something as it will be apt to fly off. Also, if you have a pair of needle nose pliers, you can get as perpendicular as possible to the axle with the pliers. Have one jaw of the pliers on the open end of the e-clip and the other jaw on the axle. Give it a little squeeze, and the clip should pop off, or at least slide up enough to get a slotted screwdriver under the back of it and pop it off. I hope this helps!
Hey Dennis do you think these are better for asphalt then the other ones to come with the lawn mower?
Probably not....these tires are more solid than the original pneumatic tires, so I'd guess they will wear faster on asphalt.
These are just a smidge bigger than the factory ones. (15x6.0/6) does it still ride and cut the same?
Thanks for watching, Mike! Yes sir, they are a tad bit bigger OD, but I have had no problem with the ride, steering, etc. No difference noticed by me.
What kind of grease do you use to fill the hub?
Thanks for watching, Jon! I use Valvoline Cerulean for all my bearing and wheel applications.
Do you have to replace both front tires with flat free if you only have one that is flat?
I wouldn't replace only one with a different type of tire. These flat free tires will track and ride a little differently than the original pneumatic tires. Thanks for watching!
Hey Dennis....is there any height adjustment to the deck of these mowers...mine is at its lowest point on the lever setting marked number 2...it should go down further right?
There's really only an adjustment to level the deck. It's basically just inside the left rear fender. IF your deck won't go down all the way to the 1 setting, I'd do the following: be sure you are on flat level ground. Put the height on a setting that lifts the deck completely off the ground, then take a tape measure and measure at the same spot on either side of the deck. I generally will use the back edge of the deck near the outer edge of both sides. If both sides measure pretty close to the same, the deck is level. If not, perhaps the left side is just low and should be adjusted up. That would prevent you from dropping the deck all the way to the 1 setting. IF that's not it, let me know and Ill look for further things to test/try.
Thank you very much...our "Husky" get a real work out on the farm...so it may have be knocked out of level at some point in time with heavy use....I will certainly take your suggestions to the deck...and thanks again for the help....
Thanks Dennis! Can't tell you how much money you've saved me with your videos. I was wondering if you know of any flat free tires for the rear 20x8.00-8 tires. Seems like every year I come out to the shed to find at least one flat tire on this thing.
Thanks for watching, Gary! I have not been able to find any flat free tires for the rears.
Great videos ,Subscribed. CheersGreg.
Thank you Greg! I appreciate you watching and thank you for the sub!
My right front one is dry rotted and flat. Gotta replace. The others are fine.
Thanks for watching! That's what led me to replace my fronts, both were in pretty bad shape.
Is there a flat-free solution for the back tires as well?
Hey Ken, thanks for watching. None that I have seen. I've heard of folks foam-filling their rear tires, but I don't thing readily-available foam would hold up inside the rear tires. So I still run the factory rear tires on mine....I did fill them with water/anti-freeze for weight though.
Do you know if those original tires used Intertubes?
Thanks for watching! Mine did not have tubes.
Do they make the same for the rear tires ?
Thank you for watching, John! Not that I've been able to find.
Can you use fix a flat in these tire?
They are foam filled, so they don't go flat. Also, they don't have a valve stem since there is no air in them. Thank you for watching!
Are there grease fittings on rear wheels?
Thank you for watching, Randy! No sir, they are hard mounted to the axles, so no need for grease there.
I went to school with a DENNIS coffey in Lynn Indiana just wondering
Hi Randy, thanks for watching! No sir, not me. I went to school only in Georgia. :)
Some of them caps are a PITA to get off!!!!!!!!!!!! Especially if they are really hard and weathered - If they are hard to get off - just tear them off or get some side cutters and cut them off - if that's the case - make sure you buy a couple new ones! just a couple bucks! So check them first before you go to the store - to save from having to go on another trip!
Great point, Nicholas! I agree, once those rubber dust caps get hard, it is really tough to get them off without tearing them up.
I know I hated mine up then pulled it off with plyers
How have those flat free tires stood up over these past 4 years? Are you still using them?
Thank you for watching, David! Yes sir, still using them and they are doing great. I've had no issues and still prefer them over the original tires.
Its 2020 are the Tires still holing up If you say yes I am going to get 5 sets today I have 3 riders and my daughters both have tractors and I always get phone calls dad my tractor has a flat
Hey Charlie, thanks for watching! Yes, they are doing fine. I haven't had any trouble with them at all.
Thanks for getting back to me I have ordered 5 sets Thanks so much
The tire on mine is 15x6.00 6in can I go up to a 6.50 tire?
I don't think you'll have any problem with an extra 1/2" on the tire. It will slightly raise the cutting height, but shouldn't create any problem with turning, etc.
It won't affect anything
Hi.... my tubeless tires are 15 x 6.00-6. I noted that the marathon tires you used are 15x6.50-6 and also noted they the tires you replaced on your mower are 15x6.00-6. I assume the marathon tires would work for me just fine. Is that true? Thanks for your videos!!!!!
Hi Blade, thanks for watching! The slight difference in tire size has not been a problem, nor has it been noticeable on my mower. I've had no issues at all.
Thanks for your quick reply Dennis! I appreciate it! I’ve been repairing those tires for to long!!! 😂😂 Be safe and God bless!
Dennis, my 46" Husqvarna is leaking fuel from the carburetor. ...is this something I can fix or should I replace it?
Hi Michael, thanks for watching! It's hard to say without seeing it or more info, but it sounds like you might just need to replace the gasket under the carb. That's a pretty straightforward fix if you are comfortable working on things. Just be sure to take pictures before you take anything apart and keep up with all your parts. The gasket should be available at your local outdoor equipment dealer.
@@dwcoffey thanks Dennis for replying. I'll do that gasket and hope that solves the problem. Appreciate your advice !
Yes sir! Let me know if I can help.
How did these tires hold up?
So far, so good! They are several years old and still doing fine. Thanks for watching!
How do they ride? Are these better than air filled?
Thanks for watching! They are slightly stiffer than the pneumatic tires....but I notice very little difference in the ride.
Do these new tires add more of a bone-rattling/rough ride? From my experiance air-filled tires add more of a suspension system to the tractor; more give. I figured this would be an issue with these solid type tires? Great vid. Thanks.
Thanks for watching! I haven't noticed any difference in the ride. I expected the ride to be worse with these tires, but there's little to no difference. I thought these tires would be like hard rubber tires, but I think they must be foam-filled. they're not as hard as a solid rubber tire would be.
What’s the grease for?
I am replacing lawn tractor tires every 2-3 months and I have no idea why. The clerk told me these tires would make the ride so rough I wouldn’t be able to handle it. How was the ride? I’ve already spent 80 on tires this summer.
So my question is, you've had these now for a year, how are they holding together?
Thanks for watching Azzie. These tires are holding up great! I have nearly 200hours on them, some of it in rough terrain, and they are showing very little signs of wear. I love mine!
@@dwcoffey great ! Can't afford those so I put a tube in . If flat again, I spray the green slime in. 9 years later I have 700 hrs and still the same tires, just with tubes now.
Try Zoro or Carlisle
What's the website for those wheels?
amzn.to/3z2c2y4
Thanks for watching, Daniel!