You shouldnt never wash those burned Ic chip mate. it wil reduce the yield by 30-40% and You should burn the pcb board first for best yield, but im sure you do this for hobby only so its okey
Step 32:50 i dont have stove to boil that solution, can we use only hcl + hno3 without heating it? and if really required, what is the use of boiling that solution?, If we can do that without boiling the solution, how long its gonna take to wait until next filtering the solution?
@@ImanGoldRecovery hay que tener en cuenta la placa y conectores,sin olvidar plata,paladio y cobre...si no no ganas dinero,lo mejor fundir las placas con cobre y pasarlas por nítrico,precipitar el paladio,la plata y el cobre.
very low yield, you lost many many golds due to bad method. please try lead method. mobile phone pcba contains about 1.0-2.0g/kg gold. Estimated yield is 3.4g - 6.8g.
@@ImanGoldRecovery In the method using acid, only the surface of the gold can be dissolved. Therefore, when acid is used, the material must be crushed to a diameter of 10 um or less. In the lead method (high-temperature melting method), borax is added to vitrify the ash and separate all the gold. Since everything is liquid, even very fine gold can be recovered.
КЛАССНО У ВАС ПОЛУЧАЕТСЯ , Я ТОЖЕ ДЕЛАЮ ЗОЛОТО И ПАЛЛАДИЙ , У МЕНЯ ТОЖЕ ИНТЕРЕСНЫЕ РОЛИКИ 😇😇😇
its very good and thanks for watching my video sir 🌹🌹🌹
@@ImanGoldRecovery Please dear friend, I really like your videos, I watch them with pleasure. Good luck in refining
thanks bro 🌹🌹🌹🌹👍@@delaem_zlato_
Nice as hobby. Look for ore recycling !
thanks for watching my videos bro
You shouldnt never wash those burned Ic chip mate. it wil reduce the yield by 30-40% and You should burn the pcb board first for best yield, but im sure you do this for hobby only so its okey
yes .thanks for help 👍👍🌹🌹🌹🌹🌹🌹
ЗДРАВСТВУЙТЕ , ВЫ ХОТИТЕ СКАЗАТЬ , ЧТО ПОСЛЕ ОБЖИГА МИКРОСХЕМ ИХ НЕ НУЖНО МЫТЬ А СРАЗУ В КИСЛОТЫ ?
Can u teach me how to extract
Step 32:50 i dont have stove to boil that solution, can we use only hcl + hno3 without heating it? and if really required, what is the use of boiling that solution?, If we can do that without boiling the solution, how long its gonna take to wait until next filtering the solution?
not problem bro .leave it for 45 min
Seems to be over processed isnt it Sir??
Amazing work
tanxxxxx
I do not see you testing the solutions after leaving to settle post-drop. Are you sure all gold has dropped????
thanks for watching and informaton
wooooow che goshti
kharabkar
Brother how many mobile circuits required for 10grm gold
hi how are you juned.
Approximately 2 kg of motherboard mobile board 2 gram
Jazakallah bhai
@@ImanGoldRecovery hay que tener en cuenta la placa y conectores,sin olvidar plata,paladio y cobre...si no no ganas dinero,lo mejor fundir las placas con cobre y pasarlas por nítrico,precipitar el paladio,la plata y el cobre.
@@qtmeto thanks bro for watching and helppp 👍👍👍🌹
Brother how much wight in 100 circut borads
Did you recover any Ag from the nitric acid boil at 19:14?
yes bro .thanks for watching
basarli bi is iman bey kly gesin
sagull harun bey
what kind of gold is that?
Sir please help me
How much gold recover in 100 old cell phone
Sir I see your video so nice I follow you sir
thanks for watching my chanell . how many phone brands exists?
Один грамм примерно ! 1 грамм...
Brother for starting how many mobile pcb will take
you need 30-40 pcs scrap phone cell for starting
1kg pcb old cell phone = 0.40_0.50 grm 24 k gold
Very good
tnx ismoooo
Lots of hard work?
its not to hard .you need experience and information to do it
tanxxxxx
Здесь вообще нет тяжелой работы! Только ядовитая.
@@ImanGoldRecovery👍👍👍
Is it available to take a gram of gold in one kilo of old phones?
For one kilo of gold, you need about 1,200 kilos of mobile range, my friend. Old mobile phones
@@ImanGoldRecovery 👍
@@حيدرالعراقي-ف7ه 🌹🌹🌹🌹🌹
@@ImanGoldRecovery can please tell me brother what is the profit margin left after all process?
Ook bu ose merak ediyorum çok iyi
videolari takip edinn 👍
, ভাই পুরনো ফোন কি কি কাজে লাগে একটু জানাবেন
My dear friend, I share my experiences with you and this work is very valuable and profitable on a large scale.
পুরনো ফোন কিনে যদি কাজ করা হয় লাভজনক হবে তাহলে❤❤❤❤
Which board u worked on? China or nokia
🌹🌹🌹🌹👍
@@ImanGoldRecovery what kind of answer is this?
In this video, we used all the device models in a mixture, my friend
in this video have mix model phones.nokia.samsung.apple.chin models
in nokia model have very good gold
Can we use Hcl instead of nitric acid in step 1 of peel out gold from mobile board
No, it can not dissolve metals in itself
Brother if we add H2o2 in HCl after that this solution will dissolve copper(because I don't have nitric acids)
@@junedqureshi9585 Yes, you can use it, but you need a lot of time to do it.3-5 day
If u don't have hno3,use H2so4+h2o2+H20,same result as HNO3
@@私エンターテイナーです yes tanks broooo🌹🌹👌👍
Sir which company's acid are you use
turkish marka broo
Filtering fabric name or link please?
You can use any fabric that is plastic and resistant to heat, for example, the fabric of house curtains
very low yield, you lost many many golds due to bad method. please try lead method.
mobile phone pcba contains about 1.0-2.0g/kg gold.
Estimated yield is 3.4g - 6.8g.
thanks for watching and information sir
@@ImanGoldRecovery
In the method using acid, only the surface of the gold can be dissolved.
Therefore, when acid is used, the material must be crushed to a diameter of 10 um or less.
In the lead method (high-temperature melting method), borax is added to vitrify the ash and separate all the gold. Since everything is liquid, even very fine gold can be recovered.
İman bey sagull
teşekurler
sweet nugget :)
thanks for watching brooo 👍👍🌹
Uçtu
🌹🌹🌹
Hii
hi well come to my chanell bro
Agha iman besyar aliii
khahesh mikooonam mamnooon azatooon 👍
😱😀🇨🇿👍
tyanks bro 🌹🌹🌹👍
Zoor
teşekurler efendi
Gold wat
1.91 gram 24 k broo
how many mobile pcb total for 1.91 gram gold sir?
@@surajsagar9063 Between three and four kilos, depending on the quality of the boards, of course, the phones are original, not Chinese
@@ImanGoldRecovery i mean in 3.4 kg how many board. 200 300??
@@surajsagar9063 150_180 brooo