Old boat shafts and big rebar work too. If you find the cable pulls out of the first generation, crimp it in a loop and get the crimp down in the concrete. That will never slip
Gentleman! Although I LOVE your idea and Highly recommend it, have you thought about "cheep" sources of lead? I'm a mechanic. My store creates (ball park) from 80 to 100 lbs of used lead wheel weighs. They scrap guy pays a PENNY A POUND for "scrap" lead. What about scrap batteries (auto)? 60 lbs of lead in a big one, but only worth a $6 core charge!! That's 10 cents a pound for used car battery lead (use caution, acid and all. But if the battery is drained, a box of baking soda turns what's left in to water). Scrap lead goes for 1 cent a pound at the scrap yard I can tell you that! Try buying lead From the scrap yard. Anyhoo, great idea! :-)
So you said you lose 2/3 leads every time you go fishing! So now by using this method you’re going to throw 2/3 pieces of pipe into the ocean. In my opinion if you find a construction site and ask for pieces of rebar that would be thrown away any way would be cheaper and you would not litter the ocean with plastic.
@@MovinWeightFishing What you could do is get some paper towel rolls as molds and either remove them after they dry or leave them on because they are biodegradable or wrapping paper roll tubes will work as well
@@MovinWeightFishing or u could just cut the piping around the cement it should be one long piece of concrete like a pillar an no plastic but that rebar idea is ur best bet
Guess we're lucky here in galveston. Ive been using window weights for 15 years. And still able to get em pretty easy. Already have a hole in the end too
Yea I was gonna mention something similar. I don’t mind it either way, just some folks gets cuckoo when it comes to politics. I hope it doesn’t end up being a negative for the channel. Such amazing channel with awesome contents😍😍😍
@@MovinWeightFishing i did the math and it makes it too expensive. I mean you could just get some scrap steel but still probably cheaper to do concrete
If you looped the wire through a washer it wouldn't move out of that. You could also create a form out of some wood and coat it in a concrete release agent, or line it with parchment paper or tin foil or something like that so that you have a reusable form and there would be zero chance of losing your weight and leaving plastic in the ocean that way. Food for thought. Plus you would save the money on pvc pipes if you don't use any. Scrap wood is free.
I usually use 1.5" rebar. Or you could pour the pvc as one big piece with an open end and put through holes through the concrete. Using the pvc just for the pour, not to go onto the ocean
Or you can put a pvc with a cap in a bucket of ice to prevent melting. The. Pour molten lead into it. My friend used to do that to make a jug weight to mark spots they were about to dive. I found a place near me that sells pure soft lead for .95 cents a pound. Concrete is naturally brittle so cracking over time and pulling the wire insert out is going to be a problem.
@@MovinWeightFishing I was looking online and I couldn't find a place that had prices. There are places in your area that sell it. Nick (StanzFam) uses it for his deep drops and swordfish baits. I know it's cheaper than lead, but I don't know about concrete. I do know that it would be so much easier to make and would probably drop much faster and have less drag in the current. Building supply company that caters to contractors, not the general public. In other words, not Lowes or Home Depot.
To make it environmentally friendly, just split the tubes lengthways before filling them. When dry, put a screwdriver in the crack and break out the “sinker”…no plastic left in the sea
Like the sticker and seeing a young man with a 4 wheel drive that doesn’t look like a dog squatting. Been making concrete drop weights for buoys for years
Also I go to a local scrap yard and from time to time they have 1.5" rebar for $.55 per pound. Cut it 12" and use wire to make a loop or weld a ring on top
@@rusticmade that's exactly what the hard-core day time sword fisherman use. And they'll use the thick stuff and cut off a 10 or 12 pound chunk. You could even rubber coat it to protect the boat and prevent some rust.
i watch your videos all the time .......Now i know why i like you and them ......TRUMP 2020 .......so about being political .....keep up the great work
Yeah 🇺🇸TRUMP🇺🇸 GOOD KID !!❤️🇺🇸❤️🇺🇸 Look on Facebook marketplace for a battery or a corded saws all probably can pick one up for 10 bucks you can do all that cutting the whole two tubes in five minutes good job Adam way to go I’d like your ingenuity!! Bend the wire in a circle and twisted together and put the twisted part down in the concrete then the wire will not pull out! I’m also thinking that if you bought the quick dry concrete mix with the stone in it not mortar mix concrete you might end up with a heavier mix so you could possibly cut the size down to like 12 inches????
@@MovinWeightFishing I love to watch your videos from your side and from Vic and a lot of the other fishermen on the Internet don’t have the excitement that you have and that’s great you need to get your captains license and your own boat and you need to take first timers out! AND ME OF COURSE❤️🇺🇸
Drill a hole through the plastic pipe and crimp a piece of that cable through the holes..next time tie a loop in the cable before you pour the concrete.
you can save on pipe to cut on the length of the pipe and then put a piece of tape on the length and tie with soft black wire , when dry you loose the wire stick a screwdriver in the cut and push the cement block out it is advisable to put some wire to strength the cement cylinder you can make it in lead also go to tire change shop they have loads of old tire weight you can buy cheaply from them i use them on making molded bullet and fish weight being doing it for the past 30 years ciao from italy
As usual, great video. If you take a pair of pliers and put a sleeve crimp on each end of the wire it won't pull out, and you can use whatever length of wire you want.
wounder if you could take about 20 of those pipes cut in half length wise, spray with pam inside use hose clamps to hold them together and use as a mold. That we are not you losing all that plastic pipe to the ocean
Use a food release in the pipe like Pam and it should pop out so you aren't putting the PVC in the ocean and you can use them over and over. May need to put some pieces of like chicken wire or may chopped fiberglass in the concrete to keep it from falling apart though.
Brush your dog or clean your own hair brush and use that. They used to reinforce plaster with horse and pig hair. Same concept and totally eco friendly. After all, we have plastic washing up on our beaches, not hairballs, right?
Adam...next time get "sand mix" (green in the label) and if you add some plaster of Paris to the mix it will dry super fast.....not kidding! Sand mix has no aggregate (rocks).
Awesome video you don't need to add more wire you just need to do what you said in the end add some kinks add some bins that will hold in stronger than you can ever imagine
Old boat shafts and big rebar work too. If you find the cable pulls out of the first generation, crimp it in a loop and get the crimp down in the concrete. That will never slip
The editing is insane and that is one of the many things that makes your Chanel so enjoyable. Keep it up man! That truck sounded beautiful by the way😂
Thanks! Will do!
Diggin' the Trump/Pence sticker. Atta Booooyyyeeee!!! Definitely not Booshie!!! Like the way you roll kid.
Saw the Trump sticker, I clicked subscribe.
Gentleman! Although I LOVE your idea and Highly recommend it, have you thought about "cheep" sources of lead? I'm a mechanic. My store creates (ball park) from 80 to 100 lbs of used lead wheel weighs. They scrap guy pays a PENNY A POUND for "scrap" lead. What about scrap batteries (auto)? 60 lbs of lead in a big one, but only worth a $6 core charge!! That's 10 cents a pound for used car battery lead (use caution, acid and all. But if the battery is drained, a box of baking soda turns what's left in to water). Scrap lead goes for 1 cent a pound at the scrap yard I can tell you that! Try buying lead From the scrap yard. Anyhoo, great idea! :-)
So you said you lose 2/3 leads every time you go fishing! So now by using this method you’re going to throw 2/3 pieces of pipe into the ocean. In my opinion if you find a construction site and ask for pieces of rebar that would be thrown away any way would be cheaper and you would not litter the ocean with plastic.
Shoot didn’t even think about loosing those and polluting the water... good point brother
@@MovinWeightFishing What you could do is get some paper towel rolls as molds and either remove them after they dry or leave them on because they are biodegradable or wrapping paper roll tubes will work as well
@@MovinWeightFishing or u could just cut the piping around the cement it should be one long piece of concrete like a pillar an no plastic but that rebar idea is ur best bet
love that trump sign lol!
Hell yeah
Hahaha great thing he lost!!!!
@@ratherbeoutfishing7266 must be ignoring the facts of everything going on with the elections, you'll catch up come December.
@@ratherbeoutfishing7266 not yet
@John johnson nope it's going to scotus after what they found on georgia xD
Guess we're lucky here in galveston. Ive been using window weights for 15 years. And still able to get em pretty easy. Already have a hole in the end too
Sticker is 🔥
Great idea , Next time do a Knot at the ends of the Cable that can help dramatically on holding it into the concrete , Nice video !
That’s a great idea brother, thank you
This has got to be the best youtube I watch good stuff man keep up the good work man 💯💯
Glad you like it brother
Damn, didnt know this channel was filled with maga supporters
Lmaoooo me either
Suggest heavy cardboard tube in the event you loose one. More eco friendly than PVC. Just sayin'
Smart, definitely will do this next time
I like the sticker in back of the truck 👍 but if I was you I'll be safe. Doing that if you know what I mean
Yea I was gonna mention something similar. I don’t mind it either way, just some folks gets cuckoo when it comes to politics. I hope it doesn’t end up being a negative for the channel. Such amazing channel with awesome contents😍😍😍
Just bought some glasses for my son. Thanks for the discount!
Awesome brandon! He will love them
Brian*****
I am surprised you didn’t put a piece of rebar in there to make the density greater which means shorter weight...
Didn’t think of it
@@MovinWeightFishing i did the math and it makes it too expensive. I mean you could just get some scrap steel but still probably cheaper to do concrete
I really wanted the white moving weight hat
we got the movin bait's in white still.
When did you put the sealant or 5200 in the mixture?
We ended up scratching that and never using any... didn’t need too
That’s a great idea. Put 3 pieces of rebar in there to make it heavier.
Next time you make them drill holes through the PVC it holds a lot better and a little pl at the bottom and top helps them last longer
If you looped the wire through a washer it wouldn't move out of that. You could also create a form out of some wood and coat it in a concrete release agent, or line it with parchment paper or tin foil or something like that so that you have a reusable form and there would be zero chance of losing your weight and leaving plastic in the ocean that way. Food for thought. Plus you would save the money on pvc pipes if you don't use any. Scrap wood is free.
weight prices are dummy high bro i really appreciate this video im def going to use it next time i go deep dropping for tiles !
Glad I could help
b roll went hard 🔥
I usually use 1.5" rebar. Or you could pour the pvc as one big piece with an open end and put through holes through the concrete. Using the pvc just for the pour, not to go onto the ocean
Sounds good man. Thanks for the tip.
I think a wire clothes hanger cut to length would work nice for your loop
Or you can put a pvc with a cap in a bucket of ice to prevent melting. The. Pour molten lead into it. My friend used to do that to make a jug weight to mark spots they were about to dive. I found a place near me that sells pure soft lead for .95 cents a pound. Concrete is naturally brittle so cracking over time and pulling the wire insert out is going to be a problem.
push a wire coat hanger down those tubes it wont pull out those wire cable will pull out great video new subscriber
Ok
also the flair hawk in the car lookin kind of fire
You know meeeeee
If you want to make them even cheaper. Use paper towel tubes or any cardboard tube. Peel off the cardboard after the concrete dries.
That is going to pull out it’s the first time it hits the bottom why didn’t you put a hook on it or some thing or run it through the whole weight?
I got one caught in a rock 6 times and pulled it out with so much pressure and it was fine
Surprised me tbh lol
@@MovinWeightFishing I Guest if you do lose one it’s cheaper than losing a lead one.
thanks for the info! local tackle shops must be hating you!
Ahahaha they are for sure
aye great vid as always.
Yewwwww
I usually love the vids, this one was painful. 1 1/4 foot of #10 rebar is 5 pounds.
How much does it cost
@@MovinWeightFishing I was looking online and I couldn't find a place that had prices. There are places in your area that sell it. Nick (StanzFam) uses it for his deep drops and swordfish baits. I know it's cheaper than lead, but I don't know about concrete. I do know that it would be so much easier to make and would probably drop much faster and have less drag in the current. Building supply company that caters to contractors, not the general public. In other words, not Lowes or Home Depot.
To make it environmentally friendly, just split the tubes lengthways before filling them. When dry, put a screwdriver in the crack and break out the “sinker”…no plastic left in the sea
I know….. after doing it and people commenting I realized that, didn’t think of it at first
Geat idea!
Try to find some heavy rebar then all you need to do is cut it to size and drill a hole in one end.
Hello I love you channel could you make more catch and sell videos please tell me if you will
The goat
Damn you guys use 5lbs??? Now wonder I’m struggling to get good bottom with 2
Great idea making weights, now you are really "Movin weight". May need to rethink the wire attachment, weak bond in between the wire and concrete.
Ahahaah
Like the sticker and seeing a young man with a 4 wheel drive that doesn’t look like a dog squatting. Been making concrete drop weights for buoys for years
make some more snook videos king
Will doooooo
Tell Johnson we were asking about him.
Ahahahahaha classic
PVC cement would be much cheaper and easier.
Also I go to a local scrap yard and from time to time they have 1.5" rebar for $.55 per pound. Cut it 12" and use wire to make a loop or weld a ring on top
@@rusticmade that's exactly what the hard-core day time sword fisherman use. And they'll use the thick stuff and cut off a 10 or 12 pound chunk. You could even rubber coat it to protect the boat and prevent some rust.
Classic Florida boy and his candid F150 shots..... and a drawbridge
👍👍👍👍🙏
i watch your videos all the time .......Now i know why i like you and them ......TRUMP 2020 .......so about being political .....keep up the great work
Where’s the #sharklivesmatter people
Shahha
High five from northwest Florida for your Trump sticker! Love to see it. You should come here in March/April for some good ling fishing.
Message me on instagram!!! Adam.mellusi
Trump!
lol 😂 you should probably get that smoking checked up on your truck it’s a f150 lol clouds ☁️
lil cold start
First?
Trump 2020!!!
the intro is so lame lol smoke another one
go trump
Trump lost. You might want to remove the sticker from your truck.
If there was cheating and major fraud, does that still count as a loss?
Nothing is confirmed yet guys! Anyways love y’all no matter who we vote for❤️
Yep, at the end of the day, all Americans
Biden isn’t any more the president elect than I am buddy!
@@MovinWeightFishing yeah man, I guess. It just took me by surprise a bit. I love watching you fish bro. Let's see a bunch of that content. ✌🤙
Yup unsubscribing 100%
✌️
Love the Trump/Pence sticker! #MAGA
MAGA godbless everyone.
Trump 2020
you should coil up the ends of the wire those might pull out
Good idea
Buy a pvc cutter save you so much time and effort lol
I know that bridge where that bridge at I recognize that bridge ??????????
BRO I WORK THERE
The shot of kados bridge was a reminder of all the water that is starting to make Jupiter POOPiter
bro your the best love your fishing vids
Thank you brayden
Yeah 🇺🇸TRUMP🇺🇸 GOOD KID !!❤️🇺🇸❤️🇺🇸
Look on Facebook marketplace for a battery or a corded saws all probably can pick one up for 10 bucks you can do all that cutting the whole two tubes in five minutes good job Adam way to go I’d like your ingenuity!!
Bend the wire in a circle and twisted together and put the twisted part down in the concrete then the wire will not pull out!
I’m also thinking that if you bought the quick dry concrete mix with the stone in it not mortar mix concrete you might end up with a heavier mix so you could possibly cut the size down to like 12 inches????
10/4 thank you Pete brotha
@@MovinWeightFishing I love to watch your videos from your side and from Vic and a lot of the other fishermen on the Internet don’t have the excitement that you have and that’s great you need to get your captains license and your own boat and you need to take first timers out! AND ME OF COURSE❤️🇺🇸
Drill a hole through the plastic pipe and crimp a piece of that cable through the holes..next time tie a loop in the cable before you pour the concrete.
Good tip!
you can save on pipe to cut on the length of the pipe and then put a piece of tape on the length and tie with soft black wire , when dry you loose the wire stick a screwdriver in the cut and push the cement block out it is advisable to put some wire to strength the cement cylinder you can make it in lead also go to tire change shop they have loads of old tire weight you can buy cheaply from them i use them on making molded bullet and fish weight being doing it for the past 30 years ciao from italy
USE MITER BOX AND BANG THEM OUT..NICE CLEAN EDGE... BEND WIRE EDGES OUT. U SHAPE WITH EARS
My dad taught me how to make weights when I was about five molds and scrap lead doesn't cost 20 bucks a pound
Thumbs up for Trump thumbs down for Ford 🤷♂️
concrete is only 60% of its weight when submerged
As usual, great video. If you take a pair of pliers and put a sleeve crimp on each end of the wire it won't pull out, and you can use whatever length of wire you want.
Awesome idea, will do
I think you should get a pipe cutter for making the weights. It would make the job much easier and faster
Agreeed
wounder if you could take about 20 of those pipes cut in half length wise, spray with pam inside use hose clamps to hold them together and use as a mold. That we are not you losing all that plastic pipe to the ocean
once cement sets take hose clamps off tap the end with a hammer and pipe should come off pretty easy.
QQ
Use a food release in the pipe like Pam and it should pop out so you aren't putting the PVC in the ocean and you can use them over and over. May need to put some pieces of like chicken wire or may chopped fiberglass in the concrete to keep it from falling apart though.
Will do, thanks for the tip
Brush your dog or clean your own hair brush and use that. They used to reinforce plaster with horse and pig hair. Same concept and totally eco friendly. After all, we have plastic washing up on our beaches, not hairballs, right?
always 🔥
That bike is to fye
Lmaoooooo
TRUMP 2020 truth will prevail!
Boo got to go look other places no sir good bye
If you know any roofers ask them to save the old vent pipes they are lead melt them up easy
Is that a 5.0 in ur truck ??
No. Eco boost badge on side.
Yes
Try 2" steel and just get a 3" nail bend it and tack weld it.
Adam...next time get "sand mix" (green in the label) and if you add some plaster of Paris to the mix it will dry super fast.....not kidding! Sand mix has no aggregate (rocks).
Ok sweet. Will do thsnks
Ayyyy I voted on that thumbnail everyone😂
Nice Buddy hope you had a good Thanksgiving
You too man
MAKE SOME LEADS for the BOYS
Awesome video you don't need to add more wire you just need to do what you said in the end add some kinks add some bins that will hold in stronger than you can ever imagine
Sweet thanks
Intro was stylin
First
Dude, where is the work bench and vice..I am too old to kneel on concrete like that..
Ahahaha I’m a youngster still
yep trump i like that
Question Adam, which sunglasses would be good for everyday use?
The ones I have I really like ones I have
one more thing - do you use swivels for leads?
Yes
How many weight are you making???
Enough to be movin it👀👀 see what I did there
Great video
Glad you enjoyed it
Trump baby lets go
Haha great thing he lost!!! American can finally head down a more productive path now that the orange is gone!
Love to see the sticker on the car👀 but love the vid happy to see you grinding👏
Thank you
Good idea would be to bend or corkscrew the ends of your wire so it’s harder to pull out of the concrete also
Definitely gotta do that next time