Finally a 1/100...is really epic but sadly lack the cockpit, that makes sense as is not a Master Grade and the Stargazer is even more special with it having 2 seats. Maybe in a future re-release?
Technically it should be 1/100.1+ scale since it's bigger than the usual Seed MG kit like the Strike. Still have to finish mine since i'm planning on putting LEDs in it.
If you plan to use a panel liner, I recommend, before putting on the panel line, using a gloss topcoat first, then putting on the panel line. If you put panel liner on raw plastic, it might damage plastic, and usually break some plastic parts. My country doesn't have topcoats, so I can't use a topcoat. But I put panel liner on raw plastic probably used on 100 kits and most of it is still in perfect condition. Only 2-3 gundam kits. Some parts were breaks. The reason was I didn't clean some panel line neater, and it damaged plastic and the broke it. Still recommend using a gloss topcoat first.
say whatever about it copy stagazer , yes it is but they did cooked with this one , the only minus is thing thing supposed to be air posing and all they give us was just a backpack support base ,lmao
I forgot to mention it in the video. They give an action base connector or adapter. But the backpack is so heavy, if you try to make a flying pose it just falls off. If you want to make a cool flying pose, you need to make a custom made U-shaped holder.
The main body is absolutely fantastic, but I do prefer the original light parts. If being the original green arc version would be definitely better. I do not think the crystal sword looking is an idea match to Stargazer. The concept of green arc is way better.
Iirc the only change in batch2 version is that the dragoon blade things are just plain clear, the v-fin is plain yellow, and the black alternate to golds are clear. I was hoping that structurally, they did something with the waist joint to make it stronger.
@@ARATAHOBBYI just got mine so I don't know how the build will go. Did you notice any grooves or empty/hollow spots where LED's could be placed? If not, then it's highly unlikely that KOSMOS would make one for this especially since they seem to only make LED sets for OOTB build with minimal modification or kits specifically made to have LED's in it.
Mr. Mark Softer is a decal softener. Surfaces with uneven molds, curved surfaces, hard decals, etc. The decal will stick perfectly, even on uneven or curved surfaces. can be softened and blended with the surface.
the sound that those leftover nubs make when jumping offscreen to a container or something, so satisfying!!
Finally a 1/100...is really epic but sadly lack the cockpit, that makes sense as is not a Master Grade and the Stargazer is even more special with it having 2 seats.
Maybe in a future re-release?
Beautiful kit but the designers straight up said paint it N O W or you will N E V E R disassemble it again
Yes. It's really difficult to disassemble some parts.
Technically it should be 1/100.1+ scale since it's bigger than the usual Seed MG kit like the Strike. Still have to finish mine since i'm planning on putting LEDs in it.
look at those effect parts 🤤🤤🤤
Parts looks to tight to assemble 😮
Just gotta buy 2 and customize 1 xD
next can you do height comparison too in every new model kit
Quality video. subscribed.
I can feel the pain in your fingers somehow 😂
😅
This is the best video amongst the countless similar ones out there.
Got so many useful tips.
Does we must use setter to apply water decal? Can i just did not use it and just soak it into water?
You can, but you need to be careful. Because decals will rip so easily. Especially Bandai decals.
what kind of action base did you use for this??
I mean the black one
Salted Fish XYZG model star ring light effect Base for MG 1/100 STARGAZER.
Do you know how many units of first batch did they've made?
Sorry, I don't have any idea about it. I only know it's a limited batch.
How tall is it in cm?
What the thinner does to the model kit? Im a beginner so i dont know any of that
Well, in this video it is meant to clean the panel line neater. Usually it is used for thinning paints.
めっちゃスターゲイザーガンダムみたい
Because it is a Stargazer Gundam Third Party model kit.
I feel that pain😢
❤
so good bro
Is it ok to put gundaam marker pour type on it?
Well, I never used gundam marker pour type. But I hear its damaged plastic, so before using it, read the description and search more about it.
If you plan to use a panel liner, I recommend, before putting on the panel line, using a gloss topcoat first, then putting on the panel line. If you put panel liner on raw plastic, it might damage plastic, and usually break some plastic parts. My country doesn't have topcoats, so I can't use a topcoat. But I put panel liner on raw plastic probably used on 100 kits and most of it is still in perfect condition. Only 2-3 gundam kits. Some parts were breaks. The reason was I didn't clean some panel line neater, and it damaged plastic and the broke it. Still recommend using a gloss topcoat first.
😮😮😮
say whatever about it copy stagazer , yes it is but they did cooked with this one , the only minus is thing thing supposed to be air posing and all they give us was just a backpack support base ,lmao
I forgot to mention it in the video. They give an action base connector or adapter. But the backpack is so heavy, if you try to make a flying pose it just falls off. If you want to make a cool flying pose, you need to make a custom made U-shaped holder.
The main body is absolutely fantastic, but I do prefer the original light parts. If being the original green arc version would be definitely better.
I do not think the crystal sword looking is an idea match to Stargazer. The concept of green arc is way better.
what version is this?
First Batch
Please review the batch 2 version
Sorry not interested in 2nd batch
Iirc the only change in batch2 version is that the dragoon blade things are just plain clear, the v-fin is plain yellow, and the black alternate to golds are clear. I was hoping that structurally, they did something with the waist joint to make it stronger.
@@ivanj46 If Kosmos make a led unit. I will buy 2nd batch.
@@ARATAHOBBYI just got mine so I don't know how the build will go. Did you notice any grooves or empty/hollow spots where LED's could be placed? If not, then it's highly unlikely that KOSMOS would make one for this especially since they seem to only make LED sets for OOTB build with minimal modification or kits specifically made to have LED's in it.
Why 1/99.9?
cause it’s a bit bigger than the original MG of bandai
ガンダムのスターゲイザーのパクリだけどかっこいいな
凡士林。
굴곡이 없는곳인데 굳이 소프터를 왜?
Mr. Mark Softer is a decal softener.
Surfaces with uneven molds, curved surfaces, hard decals, etc. The decal will stick perfectly, even on uneven or curved surfaces.
can be softened and blended with the surface.
海賊版ガンダムですか😑
違法物ですか😑
日本のアニメ文化、ガンダム、ガンプラを愛する人達、そしてBANDAIを侮辱しているよねほんと😑
でも…本家顔負けぐらい精巧に作られてる🎉
MGサイズを作らなかったバンダイは間違っている。 (Google翻訳)
They are all abs plastic. Did you topcoat it first?