I've watched this about 6 or 7 times since I found it 3 months ago and it always captivates me. That's what I wanna make when I grow up. It's a beautiful build, seeing it done gives me greater appreciation yet.
I have tons of videos that I've saved for when I grew up. Problem is I grew past that point (in a matter of weeks) and now all I have is the videos. There's no time like the present. Seriously.
You did an AMAZING JOB!!!! Beautiful swing! As a fellow woodworker, you were giving me a panic attack, the way you were using the tools!!!! Please, be safe and keep all of your limbs and body protected!
Mogę w końcu to powiedzieć! Dzięki temu filmowi i paru wskazówkom których mi udzieliłes udało mi się zrobić identyczny fotel! Żona jest mega zadowolona. Dzięki!
- Great project. Nicely done. A spiral router bit would have worked wonderfully for the first circular cut. They're one of the best router bits created.
Hej męczą mnie takie pytania odpowiesz mi na nie? Dlaczego pokazujesz że potrzeba 100 deseczek czyli że powinno wyjść Ci 5 "kółek" a robisz ich tylko 4? Czy gdy przecinasz kółka to tak aby były dwie takie same polówki? Czy te "krótsze" kawałki okręgu to takie mniej więcej jedna czwarta całego okręgu? I ostatnie pytanie co to za nutka z początku filmu? Szacun za wykonanie! Z góry dzięki za odpowiedź 😊
Beautiful. Just watch those strings from your sweater. Could of got sucked up in the router and ended this video in a different way. Thanks for sharing
You haven’t been shopping lately. Lol. That can and would easily be $1,000 - 1,400! That’s the reason I was looking for a DIY. The macrame ones are ridiculously high.
Umm I’m sorry but this is hand made. Which equals labor. The ones for $$400 are factory made. And a lot smaller. Also doesn’t look half as comfortable as this one. This is easily a $2000 chair
Buenos días desde España lo primero decirte que eres un he quedado encantado con el trabajo un favor me podrías dar dar las medidas de la esfera o sea el diámetro hilos gruesos de madera
Ile czasu zajęło Panu wykonanie? Chciałabym wykonać podobny na prezent, ale zastanawiam się czy wystarczy czasu 😬 I czy mógłby Pan wypisać swój plan działania w punktach? Nie chciałabym się pogubić. Byłabym bardzo wdzięczna 🤗
I've watched this about 6 or 7 times since I found it 3 months ago and it always captivates me. That's what I wanna make when I grow up. It's a beautiful build, seeing it done gives me greater appreciation yet.
I have tons of videos that I've saved for when I grew up. Problem is I grew past that point (in a matter of weeks) and now all I have is the videos. There's no time like the present. Seriously.
You did an AMAZING JOB!!!! Beautiful swing! As a fellow woodworker, you were giving me a panic attack, the way you were using the tools!!!! Please, be safe and keep all of your limbs and body protected!
Mogę w końcu to powiedzieć! Dzięki temu filmowi i paru wskazówkom których mi udzieliłes udało mi się zrobić identyczny fotel!
Żona jest mega zadowolona.
Dzięki!
Pochwal się twoja praca na naszym mailu ! ☺️: buildityourself1998@gmail.com
СУПЕР, СУПЕР, СУПЕР, СУПЕР, СУПЕР, СУПЕР
You are a seriously talented young man! Thank you for showing this swing... I want to make that for my son. He will LOVE it🥰
Wish me luck
Dasz radę! Wierzę w Ciebie! Ja dałem radę zrobić to i Ty dasz radę!
This would be SO cool as a massive pendant in a big room with vaulted celeings
Exactly what I was looking to make for my wife! Thank you for the inspiration!
Dimensions and directions for everything would be awesome! 🥰
Wow this is awesome man anyway I could get the measurements
Very well done!
Mega fajna robota . Postaram się zrobic taki sam . Mam nadzieję że mi wyjdzie 😀 . Naprawdę jestem pod wrażeniem.
- Great project. Nicely done. A spiral router bit would have worked wonderfully for the first circular cut. They're one of the best router bits created.
Could I get the plans? What size are the boards? What angles ares the cut. Thanks very nice chair
That’s a stunner
WOW! That is absolutely beautiful work
He is
Great project! Nice looking! Thanks for sharing it!
That was a lot of work but looks amazing love the music too.
Can you please tell me what materials I need and about how much it cost to build this... absolutely AMAZING!
Wish I could like this 100 times
Hej męczą mnie takie pytania odpowiesz mi na nie?
Dlaczego pokazujesz że potrzeba 100 deseczek czyli że powinno wyjść Ci 5 "kółek" a robisz ich tylko 4? Czy gdy przecinasz kółka to tak aby były dwie takie same polówki?
Czy te "krótsze" kawałki okręgu to takie mniej więcej jedna czwarta całego okręgu? I ostatnie pytanie co to za nutka z początku filmu? Szacun za wykonanie!
Z góry dzięki za odpowiedź 😊
Excelente laburo!! Felicitaciones!!
You are AMAZING!!!!!!
That was freaking AMAZ-BALLZ
you amaze me, just to even
have the ability to come up with the idea, wow such details and hard work awesome.
Sit on it wey. Won't even last 10 minutes. Creek Creek snap. But it is very nice. Like the way you did the lapping. Thumbs up.
Gratulacje! Piękna praca :)
Beautiful. Just watch those strings from your sweater. Could of got sucked up in the router and ended this video in a different way. Thanks for sharing
Jestem pod wielkim wrażeniem. Super to wygląda i fajnie zrobiony film. Znalazłem Panią pomocnik w Twoim filmie. Pozdro Sub i łapa w górę bo jest moc.
Super wyszło, pozdrawiam!
Ficou muito linda parabéns, você é um artista!!
Amazing build! Anywhere we can pick up blue prints for this?
This could easily sell for around $400-$600 area. I'd get the blueprints for this copyright protected cause this is a gorgeous swing chair.
U
You haven’t been shopping lately. Lol. That can and would easily be $1,000 - 1,400! That’s the reason I was looking for a DIY. The macrame ones are ridiculously high.
Umm I’m sorry but this is hand made. Which equals labor. The ones for $$400 are factory made. And a lot smaller. Also doesn’t look half as comfortable as this one. This is easily a $2000 chair
This is exquisite!
Pretty good although I would add dominos to pieces. End grain to end grain will always be weak. Good work though!
Would have loved to see how it was mounted onto the ceiling
Mi sueno siempre ha sido este tipo de sillón, ❤
BEAUTIFUL WORK ...
What a great talent u have working with wood
Wow, you got skills!!!! Loved it.
хорошая работа!
respect dude
You are very talented
Замечательная работа! Удачи в будущем!
Soooooooo good
Great work....!!!
Espectacular amigo! Saludos desde la Patagonia Argentina
Fantastic idea, workk
Good job!!!
Lovely work
Wow Super work. !!!
looks amazing, thanks for sharing
Did you start off with 1x8 or 2x8?
Super👍 dobra robota
Crafts DIY.. nice
świetna robota:) miewasz czasem zawroty głowy?
Gorgeous!
Awesome
You are a hero, dude!
Really nice build
Pretty neat.
Awesome!
Super realizacja! Szkoda że taki ładny plakat (może kalendarz) zasłoniłeś :))))
amazing, I was looking for exactly that just
thank you
Wonderful
That is a lot of work...
Łapka w górę
Gorgeous ..fist bump 👊
Круто👍👍👍
아주 잘했어요. 만들어 보고 싶어요. (korean words)
Прям здорово!!!
Wow!!! You are amazing
Could I get the plans? What size are the boards? What angles are the cuts?
Buenos días desde España lo primero decirte que eres un he quedado encantado con el trabajo un favor me podrías dar dar las medidas de la esfera o sea el diámetro hilos gruesos de madera
People Q at 5.30am to get into the Lidl shop in Ireland to buy a crap option of these. Great job anything made from wood is better
Nice work my boy😅
Great job! Looks great! Thank you for posting
Put legs on it for indoors. My grandchildren would love this chair exapecially my granddought and my daughter..
Szacun💪
Ile czasu zajęło Panu wykonanie? Chciałabym wykonać podobny na prezent, ale zastanawiam się czy wystarczy czasu 😬
I czy mógłby Pan wypisać swój plan działania w punktach? Nie chciałabym się pogubić. Byłabym bardzo wdzięczna 🤗
To zależy od zaplecza stolarskiego ;D ja to robilem w wolnym czasie trochę z tym zeszło bo wszystko trzeba było wymyslac na bieżąco ;)
Mógłbyś podać pod jakim kątem docinales deseczki na ukośnicy? I jaka mniej więcej była ich długość?
Bardzo proszę o odpowiedź
Długość desek to 42.5 cm na styk a kat to jakieś 18° nie powiem dokładnie bo moja ukośnica ma podziałkę źle ustawioną.
where did you get the cushion?
What did you attach it to?
Can I just order one? lol
Just look up globo chair on EBay or Amazon looks good to me
Wooow perfect projekt 👍🐒❤️🔥🔥🔥
Bro b nice to the router lol ; and incredible job btw it’s fantastic
very nyce
Cool👍
👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
still works?
Nice 👏👏👏
good
are the plans located anywhere?
Great!!!!
O, Polak ;)
Super cool that can't you change the music
IKEA be like. “Hey u wanna be our production manager?”
0:50 nice
woow perfect ....im crazy about swing chair and ur work is amazing ...im ur follower from ALGERIA ❤💚
What is the angle degrees of the first cuts please
I don't remember exactly around 18 degrees
Cut from plyfood sheet not easy ?