You claim that the Kilz product is recomended for garages and other drivable surfaces. Kilz website says it IS NOT RECOMENDED for garages and other drivable surfaces. I can only wonder how many people made that mistake based on your review. You need to make a correction or remove your review.
The problem with this channel, as well as other 'review' video channels, is that there is no real independent _tests_ with accompanying _independent reviews of tested performance_ . These are only advertisements for the products, only restating the claims of the manufacturers.
Exactly, they do this for the views and get paid. If anyone clicks on the links and purchase the products, then that's icing on the cake, affiliate kickbacks. We're on our own pretty much.
BEHR AND RUSTELIUM . NO WAY that stuff is crap... So many law suits and is a night mare to remove after fails. Drylock is pretty decent but proper surface preparation is a must to avoid failure. Strongly recommend gridding the surface for a new and clean surface.
My basement had old tiles that was glued down. We have scraped the floor of the best we can. It’s all black I’m guessing the glue was black or it’s just dirty mold. We have scrubbed the floor is clean as we can get it. What paint will be best to cover glue on an old concrete floor?
Same thing for their spray paint. Overpriced and prone to clogging. If you contact Rust Oleum customer service, they'll give you the runaround about the expiration date on the bottom of the can. At the Big Orange Store, I choose the generic stuff that either on the bottom shelf, or on the floor. It is superior to Rust Oleum and 1/2 the price.
Problem is with most concrete is the moisture comes from the ground through the concrete and will lift the paint by creating bubbles that will work loose. Paint doesn't hold up well to concrete or wood. It is a constant maintenance thing. If you insist in paint Tread Plex from Sherwin Williams holds up pretty well. We paint all our floors at work with it. Personally I like concrete stain better than paint.
I have clients that got their garage floor painted, but rust went through the pain, then they got another contractor to redo it, and rust came back again. Now it's my turn and I know there's got to be some simple solution. I would think that If I was a chemist I would have been able to create something that is easy, no brainer application that would seal and stick to anything. Anyone out there have some amazing stuff they've used and time tell story that it worked???
I used Kilz over armour on my outdoor wood panel bench for testing before applying it to my complete deck. I followed complete instructions and After 1 Summer, the paint chipped and peeled away. Very disappointed with this product, will never try it again.
I had a lot of problems with BEHR paint and that was just for a wall. It came off when I tried to wash it and also could not get it to cover well. I don't think I would by BEHR again.
This video covers products available from Home Depot stores in US. Because I think the quality of paints from HD are on the inferior side I didn’t bother to watching the video and went straight to the comments. It think this video isn’t going to be helpful or useful for most people. Painting of any type but especially for concrete requires serious preparation which was not covered here. That shortcoming is enough to disqualify the video. Don’t think you’re going to learn anything useful here.
I have used Rustolium Deck Renew a couple times on wood decks and it works and looks great. Been thinking of trying it on some concrete walk slabs. It comes smooth or textured but don't... use it on new undried pressure treated wood. Wait a year or so for the woods moisture to disappear. Anybody else tried it ?
I used that Kilz Over Armor paint on my patio and it bubbled up after 3 months. Had to do 2 coats also because of the spotty look after the first coat. Now I`m out the money and time. I`ll never use any Kilz product again. Shit product in my book.
With the water protection spray (#2) can you use that over painting the floor? As a protection layer? Looking pulling up the carpet in my basement and painting the concrete flooring. With product 1 would you need to use a primer? Or what items on this list would you need to use a primer? Thanks
So if Kilz is slip proof then it will show all black tire marks when used on a garage floor. So you’ll have a nice looking area everywhere but where your car is parked.
Kilz Wood/Concrete covers 75 sq', two coats recommended. So, for a typical 2-car garage measuring 576 sq', that would be 15+ gallons. It's about $30/gal. That could get pricey.
Put a water base paint on my concrete floor in the living room then a top oil-based polyurethane(ask the clerk at HD for a clear water-base polyurethane /didn’t double check myself) but it turned yellow andthe paint was white. Can I put a Oil-based paint on top of it, to fix it?
So.... There was no actual test or real world review of any of these products. Video is useless. I can read a product website myself. I was hoping for something better.
Wow nice ..what if there's paint on it already,. What if some paint taken off some spit but not on other spots can you paint over and it will hide that or take all prier paint 🤔
I used the Behr Granite Grip paint on a concrete covered patio. The paint covered everything and looked great for about 2 years when it began to chip off in big patches. What did I do wrong?
please advise your recommendation for a full-size tennis court in southern ca. not used for tennis, occasionally used for wedding receptions. bare concrete never painted, rough surface but sound 40 years old. I'll be doing this with some local help. I would like some type of green color if possible, if not ok.
Behr's Grip paint product is the worst on the worst on the market!! you end up spending more than $2000 to finish up our small pool deck area and afer few weeks passed, paint started to chip!! Won't recommend!
The people that made this video do not have any product except for this useless video as they do not speak on the preparation work required for concrete to be painted.
Really? This guy is the best you could find? Pretty obvious when the narrator or the crew knows nothing about the hardware category. He pronounced 1/4" as "one fourth" and "3/8" nap roller as "thirty eight" nap roller. Thanks for the laugh.
![ROSÉ(로제) - APT. (Band VER.) (With. 이영지) [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/IW8qaemx74g/mqdefault.jpg)
✅1. KILZ Wood/Concrete Coating: bit.ly/3AR41if
✅2. Eco Advance Concrete Coating: bit.ly/3NE5ss2
✅3. Rust-Oleum Concrete floor Paint: bit.ly/3LTylPn
✅4. BEHR Concrete floor Coating: bit.ly/3pbxv7G
✅5. DRYLOK Epoxy Floor Paint: bit.ly/40ZmpQp
Need Help? Chat with Cybella: bit.ly/3SXwwoN
You claim that the Kilz product is recomended for garages and other drivable surfaces. Kilz website says it IS NOT RECOMENDED for garages and other drivable surfaces. I can only wonder how many people made that mistake based on your review. You need to make a correction or remove your review.
worked great for 4 yrs thenbubbled up in places so difficult to remove would never use again
The problem with this channel, as well as other 'review' video channels, is that there is no real independent _tests_ with accompanying _independent reviews of tested performance_ . These are only advertisements for the products, only restating the claims of the manufacturers.
Exactly, they do this for the views and get paid. If anyone clicks on the links and purchase the products, then that's icing on the cake, affiliate kickbacks. We're on our own pretty much.
You got that right. I've been a concrete floor coatings contractor for 35 years and this stuff is no better than a lot of other products
@ 3:05 "STUCO" ? The machine generated voice or if a person has no idea how to pronounce STUCCO. EGADS!
BEHR AND RUSTELIUM . NO WAY that stuff is crap... So many law suits and is a night mare to remove after fails. Drylock is pretty decent but proper surface preparation is a must to avoid failure. Strongly recommend gridding the surface for a new and clean surface.
My basement had old tiles that was glued down. We have scraped the floor of the best we can. It’s all black I’m guessing the glue was black or it’s just dirty mold. We have scrubbed the floor is clean as we can get it. What paint will be best to cover glue on an old concrete floor?
Don’t waste your time and money with the rust oleum I applied it and 8 months later if peeled off called the company they were no help stay away
i believe you , won't believe how much shit is going on in America
Same thing for their spray paint. Overpriced and prone to clogging. If you contact Rust Oleum customer service, they'll give you the runaround about the expiration date on the bottom of the can. At the Big Orange Store, I choose the generic stuff that either on the bottom shelf, or on the floor. It is superior to Rust Oleum and 1/2 the price.
I had the same issue with Rust-Oleum.....spent 2 days preping the floor and acid wash.....6 months later the paint peeled.... terrible product!
Problem is with most concrete is the moisture comes from the ground through the concrete and will lift the paint by creating bubbles that will work loose. Paint doesn't hold up well to concrete or wood. It is a constant maintenance thing. If you insist in paint Tread Plex from Sherwin Williams holds up pretty well. We paint all our floors at work with it. Personally I like concrete stain better than paint.
Can I stain an old patio with rust stains? What do you recommend?
I have clients that got their garage floor painted, but rust went through the pain, then they got another contractor to redo it, and rust came back again. Now it's my turn and I know there's got to be some simple solution. I would think that If I was a chemist I would have been able to create something that is easy, no brainer application that would seal and stick to anything. Anyone out there have some amazing stuff they've used and time tell story that it worked???
With the little bit of knowledge I was told there is a chance that the cement you have has contaminants in it like iron.
Finally a good video. Thanks
Thank you.
Must the garage floor be cleaned of oil and grease stains before using the paint in this video?
At a minimum !
Thanks for the video, very helpful. Looking for the right product to spruce up laundry rough concrete floors
What is the best product to use on a poured concrete garage wall.
I used Kilz over armour on my outdoor wood panel bench for testing before applying it to my complete deck. I followed complete instructions and After 1 Summer, the paint chipped and peeled away. Very disappointed with this product, will never try it again.
Wow beautiful explanation
I had a lot of problems with BEHR paint and that was just for a wall. It came off when I tried to wash it and also could not get it to cover well. I don't think I would by BEHR again.
Sounds like you have to do a deep cleaning of the floor first and perhaps put a ground coat on it first before the paint
What's the procedure to paint over concrete that's already painted and what would be the best paint to use? Thank you for taking the time to answer.
This video covers products available from Home Depot stores in US. Because I think the quality of paints from HD are on the inferior side I didn’t bother to watching the video and went straight to the comments.
It think this video isn’t going to be helpful or useful for most people.
Painting of any type but especially for concrete requires serious preparation which was not covered here.
That shortcoming is enough to disqualify the video. Don’t think you’re going to learn anything useful here.
I have used Rustolium Deck Renew a couple times on wood decks and it works and looks great. Been thinking of trying it on some concrete walk slabs. It comes smooth or textured but don't... use it on new undried pressure treated wood. Wait a year or so for the woods moisture to disappear. Anybody else tried it ?
I used the RustOleum twice and didn’t make it through one winter on my garage floor
Do not take any of that advice, the best is a 2 compound epoxy coating, not paint. Paint wears off. Epoxy will not wear.
@Robert Kattner epoxy for outdoor?
@@nspacetime yes, you can use epoxy outside.
@@MeetTheSLAYER which products work for the garage?
@@hu9678 what epoxy product do you recommend for a two car garage and how many gallons and coats. Thanks
I used that Kilz Over Armor paint on my patio and it bubbled up after 3 months. Had to do 2 coats also because of the spotty look after the first coat. Now I`m out the money and time. I`ll never use any Kilz product again. Shit product in my book.
Poor prep work.
They suggest that you always do two coats. The second coat will be easy if the first coat is applied right with the right amount of paint.
What do you feel is the best concrete filler for large chips and cracks so I can paint my garage floor
What is stuuuuco... and 4 x 4 inch sections? Wow, that would take forever :)
All of these were recommended for horizontal surfaces. I have a new cinder block wall I want to paint.
PG makes the best concrete paint !!!
is this is good for garage floor too my garage floor is so darty
With the water protection spray (#2) can you use that over painting the floor? As a protection layer? Looking pulling up the carpet in my basement and painting the concrete flooring. With product 1 would you need to use a primer? Or what items on this list would you need to use a primer?
Thanks
So if Kilz is slip proof then it will show all black tire marks when used on a garage floor. So you’ll have a nice looking area everywhere but where your car is parked.
What would you recommend for a store front sidewalk that has been painted two differant colors in two years with little to no maintenance.
Large torch to burn old paint off
I'm ready to go, but where do I find "38 inch nap rollers?" 8:46 LMAO
You might try a car wash.
Kilz Wood/Concrete covers 75 sq', two coats recommended. So, for a typical 2-car garage measuring 576 sq', that would be 15+ gallons. It's about $30/gal. That could get pricey.
75 sqft x 4 = 600 sqft,,,that'll be 4 gal for 1 coat, 8 gal for 2 coats x $30 = $240...rather inexpensive...esp. if labor is free.🤔🤔
@@weliveinsf 75x4 = 300 double your estimate
Hi: I painted my newly concrete driveway which was also primed before: now the paint is peeling, what can I do now? Thankyou!
Mmm, which one to use, when they all sound great... painting a 48x48 foot hanger.
Put a water base paint on my concrete floor in the living room then a top oil-based polyurethane(ask the clerk at HD for a clear water-base polyurethane /didn’t double check myself) but it turned yellow andthe paint was white. Can I put a Oil-based paint on top of it, to fix it?
Are your products available in india?
Some of them for sure
Do i have to use concrete bonding primer before applying ultra grip
Question: can any of these products be used on repainting also do any come in custom colors
Repainting?
So.... There was no actual test or real world review of any of these products. Video is useless. I can read a product website myself. I was hoping for something better.
It’s no different than watching a Kelly Blue Book advert. Same thing except that’s about cars and trucks. Agree with you 100%.
Will this work well on pea gravel drive way?
Wow nice ..what if there's paint on it already,. What if some paint taken off some spit but not on other spots can you paint over and it will hide that or take all prier paint 🤔
Can the clear, second option be used indoors I (living) basement setting?
Behr productively even after propped prep
When did you applied it?
I have an existing epoxy floor, but I would like to change the color. Do I have to remove the old color entirely?
Clean it really, really well and prime it if there is any question and you should be good.
@@hulkhuggett thanks very much.
Which if any can you add color . i.e. blue
What about painting on already painted floors
I used the Behr Granite Grip paint on a concrete covered patio. The paint covered everything and looked great for about 2 years when it began to chip off in big patches. What did I do wrong?
what went wrong or thats how that paint lasts !
Look at Mike Day concrete. He will show you how to prep,paint and seal concrete.
Can this paint be put over stucco?
Can we mopped on floor after paint
Yes you can
What do you recommend for previous painted surfaces?.. hard to get all the old paint off so need a paint that works
please advise your recommendation for a full-size tennis court in southern ca. not used for tennis, occasionally used for wedding receptions. bare concrete never painted, rough surface but sound 40 years old. I'll be doing this with some local help. I would like some type of green color if possible, if not ok.
is the siloxane product you mention good to protect wood that is weathered?
Will this work on tile?
Can the Eco Adnanced be used as an undercoat for Drylock or Kilz
Yes you are right i work at a body shop you have to do good prep work so paint will stick good ventilation gloves and safety glasses
Great video
Thank you so much
Is it available in India?
Can I use this if stenciling
Hi Suresh from india, from Hyderabad iam interested in this flooring, I need support and material.
Thanks for a free great review. Do you have to pretreat our prepare concrete surface (wall) first?
The answer is always yes. Cleaning , degreasing, dry, repair cracks, then apply coatings.
How about outdoor driveway? How long does it last
38” nap rollers??? That would even be too much for Thor to manage!! Who is narrating this? It is 3/8 inch nap rollers...geez, man!
Where do I get your products
none of this is their products, they do not make any products, just useless idiotic videos that completely ignores that prep work required.
siloxane is not prounounced "silo-zane"........ it's "si-lox-ane"
Isn’t it slippery when wet
Rust Bullet. Hands down.
Are these paints water proof?
Dont waste you time, use expoxy once and for all, in the long run is cheaper.
Only available in the USA , what about the rest of the world .
There is a rest of the world, lol. Seriously, you have a good question.
Hi, Is the `` Rust-oleum armor gray satin concrete floor paint `` good for outside retaining wall? thanks!!!
Behr's Grip paint product is the worst on the worst on the market!! you end up spending more than $2000 to finish up our small pool deck area and afer few weeks passed, paint started to chip!! Won't recommend!
Did he say stoooco ??
This was disappointing as I would have liked to have seen the results of each of those products
Thanks you alot
What would be best for a concrete retaining wall
Please do you have your product in Ghana
The people that made this video do not have any product except for this useless video as they do not speak on the preparation work required for concrete to be painted.
Cost price
Works on stewco
Really? This guy is the best you could find? Pretty obvious when the narrator or the crew knows nothing about the hardware category. He pronounced 1/4" as "one fourth" and "3/8" nap roller as "thirty eight" nap roller. Thanks for the laugh.
Ohhhhh, that’s what he meant, he must be a robot.😀
Don't u know that natural sounding voice is really AI? U just mentioned some tell tail signs, for now anyway
Lasting of concrete paint
I want to paint over grease oil and junk
Lol!!! Me too! And very rough concrete! Want to make it disappear in a snap!!
Nice
Can I get in india
what would work best to use to paint out door basketball court?
did anyone ever reply?
No
8 minutes 50 seconds into this he says to use a 38" nap roller LMAO. I know he meant 3/8, but seriously...
I don't see a single response to any questions.
Why the music? Most annoying and distracting... totally unnecessary!
nice
This is all bs these products will fail in a year. Don't waste our money get a professional it will last multiple years an look great
So, what product would a professional use than?
STEW-CO?!
He’s reading manufacturers advertising scripts and showing stock company videos, total BS.
Sleepering on wet
Add sand in it 😎
Stew-co....... LoL
Don’t ever use this product granite floor sucks
How ?
$30 Cashback to buy any product from this review: bit.ly/cashback-reviewtube
This is more like an advertisement. Behr paint is junk: absolute garbage.
Concrete should never be painted...period
Another channel that doesn't even bother interacting with subscribers or viewer questions.
What is your question?
GAY