Sound lines not shorted . Lines have a lot of caps . To measure line you must discharge them. You just changed all the amplifiers, but the problem with reboots if you left it for another reason
I agree with the discharging,each line has 2 caps but for the SPKRAMP_TOP_TO_COIL_POS the line is not shorted on a functional working board so until this day the customer didn’t send his phone back and last time I checked like 2 weeks ago when I started to edit the video 😅
Thanks for this info I changed the charging socket. I also removed both the face id and the charging socket from the card, but the device restarts again. SD: 1 BC: 1 RC: 0 BS: 2, Missing sensor(s): Prs0
Bro i have short this side and arc side first must i check arc ic Or north ic Now i have short arc ic and north speaker and south speaker pleas what must i do
Hello, thank you again for your videos. Do you know this breakdown by chance an iPhone 11 Pro which reboots every 180 seconds with the error code Panic full sensor missing TP2C thank you
hi, i have had the prs0 error and restarts, tried to install a new oem charging port, had the same issue with it, but the weird thing is after trying a few new charging ports flexes, the prs0 error is gone but now the touchscreen is not working anymore. do you have any ideeas what is the issue please? :)
Hi, My xs keep restarting when only not use the phone… that means when the display stand even until battery full empty , no any issue… report says Possible issues U2700/U6110/J6400 May i know what kind of issue that… Thank you
I have Iphone 11 with erorr log on 3utool [crash reson: problem conecting CPU peripherals][crash code: panic cpu x caller ] due to this problem i cant activate my phone, its show unable to activate request update but its not going off randomly, how to fix it, I though the housing was changed
Which message is "AOP PANIC - K2-Bosch control channel write failures"? It's usually okay, but if you raise the volume to the maximum, it reboots and panics like that pop up.
i have the Problem with iphone 12 mini missing tp3r Sensor after i made board reball. Do you have any idea. Thank you for your video. please show also my chanel.
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
Sound lines not shorted . Lines have a lot of caps . To measure line you must discharge them. You just changed all the amplifiers, but the problem with reboots if you left it for another reason
I agree with the discharging,each line has 2 caps but for the SPKRAMP_TOP_TO_COIL_POS the line is not shorted on a functional working board so until this day the customer didn’t send his phone back and last time I checked like 2 weeks ago when I started to edit the video 😅
Thanks for this info I changed the charging socket. I also removed both the face id and the charging socket from the card, but the device restarts again.
SD: 1 BC: 1 RC: 0 BS: 2, Missing sensor(s): Prs0
I have the same thing, what did you do next?
find a good quality or original replacement part and replace the charging socket.@@ArturD-gn3gw
its very common in iPhone higher models the boot loop after 2 to 3 minutes related to charging flex audio chips and charging ics
my iphone 13 pro max has it rn
is it covered by apple?
Hi, mine Iphone SE shows panic because of missing sensors: TP1A, TP3R, TP4H, TP0Z. What should I replace in this case? Thanks!
THANKS YOU!i have the same Problem too,and i do a reballing,it working good now.
I just simply replaced power flex,
What is 'aop nmi: no response to ap power notification' means? (Ipad m1 pro 11)
Replaced 3 times, same symptom. Is this a hardware problem?
DM me
What about the shield you have destroyed? Do you put another new one ?
The phone can live without it
Bro i have short this side and arc side first must i check arc ic
Or north ic
Now i have short arc ic and north speaker and south speaker pleas what must i do
DM me
Hello, thank you again for your videos. Do you know this breakdown by chance an iPhone 11 Pro which reboots every 180 seconds with the error code Panic full sensor missing TP2C thank you
Hello,send me full panic on my telegram
hi, i have had the prs0 error and restarts, tried to install a new oem charging port, had the same issue with it, but the weird thing is after trying a few new charging ports flexes, the prs0 error is gone but now the touchscreen is not working anymore. do you have any ideeas what is the issue please? :)
DM me
AOP PANIC K2 Bosch controller restart when volume is max. Any idea what issue is?
Hi, My xs keep restarting when only not use the phone… that means when the display stand even until battery full empty , no any issue…
report says Possible issues U2700/U6110/J6400
May i know what kind of issue that…
Thank you
DM me
@@AntoineKiriaky10 how to DM you brother
Hi, i am not sure, did you change the ICS? or only do a reballing?
Change.
I have Iphone 11 with erorr log on 3utool [crash reson: problem conecting CPU peripherals][crash code: panic cpu x caller ] due to this problem i cant activate my phone, its show unable to activate request update but its not going off randomly, how to fix it, I though the housing was changed
What does "panicString": "panic(cpu 4 caller 0xfffffff01a744348): mean?
Can you send the full panic please
Hello i have panic full it says "panicString" : "panic(cpu 0 caller 0xfffffff01254cf2c): \"SEP Memory Protection Module error\"
Which message is "AOP PANIC - K2-Bosch control channel write failures"? It's usually okay, but if you raise the volume to the maximum, it reboots and panics like that pop up.
Try original charging flex first, and if it still the same DM me
@@AntoineKiriaky10 what is solution?
I did the same work. Change the ICs like 2 times and still rebooting. Any advice?
What is your panic ?
Is the battery also a cause of Restarting Every 2-3 minutes?
Sometimes yes, depending on the panic you having
@@AntoineKiriaky10 panic full just says prs0
@ iphone model ?
@@AntoineKiriaky10 iphone 11 sir
i have the Problem with iphone 12 mini missing tp3r Sensor after i made board reball. Do you have any idea. Thank you for your video. please show also my chanel.
How do I get in touch with you? Would like to have IPhone 11 checked. Reboots after 3 minutes.
Check my channel and description
Do u know how to fix a kernel data abort sir
DM me
Bro you’re fucking nailed it
Itu ic apa yang diperbaiki?
before update work fine but after update it same problime wtf why i need do this
Thanks thanks brother gerad very ex....t job.
Nice
Hi, mine says "panic(cpu 1 caller Oxffff((fO1ce70c88): AOP PANIC - No pulse on
Ox1119dc0 - power(2)
No pulse on 0x1119dc0"
Alto Falante, flex do power
The editing is too much in ur videos
Top
👍👍👍