How I made a 3D Printed replica | Dynam 70 mm Electric Ducted Fan Vs 3D Printed replica
HTML-код
- Опубликовано: 20 июл 2023
- Hello guys in this video I have created a 3D Printed replica of Dynam 70 mm EDF and compared the thrusts. Watch the video to find out the results and how close I came to replicating it.
For downloading 3D Printing files of 70 mm EDF, click on the link below :
themechninja.com/product/70mm...
To visit the website, click the link below :
themechninja.com/
Best buy link of 70 mm Dyanm EDF :
www.banggood.in/Dynam-70mm-12...
3D Printed parts link :
coming soon
Thank you guys for watching it, pls like share and subscribe :) Наука
I like the new format of the videos
Thankyou so much for watching and don't forget to subscribe 😊😊😊😊
Nice videos, great methodology. Do you think you will attach the EDF to an air multiplier style fan to see how much air flow and/or thrust it can generate kinda like the jetopra bladeless jet, leverage air entrainment?
Doing great man.
Would be nice to hang some foam to lower echo in the room.
Thankyou for your suggestion...
From next time I will use a different microphone to record the sound....
And thankyou for watching and don't forget to subscribe 😊😊😊😊
I believe the motors are different!
should try with similar brushless motors.
Please check my latest videos...I have upgraded the motord
And don't forget to subscribe 😊😊😊
Hello friend!! which engine can this EDF support to have greater thrust? I'd be grateful.
Can you please suggest me which standard bldc motor should i use (1000kv, 1400kv or 2200 kv ) for making fan in my home?🤔
Also can you tell me that can i use smps of 30 ampere for long hours ( like whole night) for bldc motor ( after making fan of bldc motor), will it be safe?🙏
Well you can use a 2200 kv motor along with 8 inch propeller.....it will not consume much amps.. and you can purchase a 12 volt 30 amps power supply to power the motor....
Generally I have not tested the motors continuously for 8 hours....but I don't think so the motor will create any problem...but you must purchase a good quality ESC....
And you can check one of my video of 8 inch propellers testing...to find out the amps drawn....
❤️❤️❤️❤️
Thankyou for watching and don't forget to subscribe 😊😊😊😊
Hi , when you chech idel weight you only checked without the scale attached to the arm. so thrust readings are incorrect! unless you have aleady calibrate the scale to minus the scale weight. But good work overall 👍
In the calculations I have added the ideal weight sir.
Thankyou for watching and don't forget to subscribe 😊😊😊
What filament type do you use doe printing the EDF?
I have used PLA
I have a 2306motor 1700kv in 6s…. Please send link for buy case
The website link is in the description...
And thankyou for watching and don't forget to subscribe 😊😊😊😊
the motors are identycal? It's not that the motor doesn't count
No the motors are not identical.
Измерил тягу без весов, повесил весы и мерит тягу с весами. Рукалицо
Gicdılax özünde bilmirsen ne edirsen
this testing is just tragic. No power readings. Not weighting the scale itself. Thrust measured not at the center of motor. You have no idea what you are doing.
I have shown you the complete wattmeter reading. What kind of power readings you are looking for ? 🤷
Bro,😳😳😳😳😳 please don't mind me, we all do🤭🤭 mistakes 🤭🤭but🤭🤭, your old videos you check the thrust correctly as well as correct way, but not this time, please make sure your salf and identify 😎😎😎I am wrong or correct, if you measure any observations you must reduce errors and human mistakes or erros due to careless .... 🙄🙄🙄🙄🙄 you had done very small mistakes, you had over weighted your observations by hanging weight machine 😄😄😄😄😄😄😄 I think so, if I am wrong let me know about this 🙃🙃🙃🙃🙃🙃 thank you
Thankyou for your suggestion bro....
But don't look at the load cell like hanging weight machine....if you check commercial thrust apparatus...they too uses a load cell to calculate the thrust....
Since weighing machine has a thrust display, it is already calibrated and has a tare button hence it suits perfect for me to use it. Apart from this..please support your doubt with any reason.....I will definitely look into it....and thankyou for watching and don't forget to subscribe 😊😊😊😊