Thank dog I'm down to one car, when there was 4 vintage Saab's in my life, the extra bits were relegated to the extra room in our rental and it started to resemble Ian's unit. at least they were boxed and marked.
I am glad you found those broken vacuum lines and the car is running nicely. Please give Miss Hub Nut a pat on the back for me for her wonderful work in the Big Tidy!
Looking forward to seeing the PJ home and in use. Miss HubNut's paper template/model technique is a favourite because it works so well! Love the smile on your face as you realised that it was working! :)
Well done Ian. Cars these days seem to have more hoses than a garden centre and any one of them can cause poorly running. It's great to see the Smart, I think she needs a name now if she doesn't have one already up and running better. Beware though I think TWC and Elle might be slightly jealous as there play time on the road may be diluted with another car to share it with.
What's kinda funny is that the Smart turbo engine starts to sound like the 3 venturi carb on a Saab two stroke when the torque curve builds, it's mostly intake roar but with that 3 cylinder beat.
Wastegate actuator has a spring & diaphragm which boost acts upon. You could feel the spring on the actuator when you moved the arm. The actuator is piped to the turbo side of the boost pipework which will give you your base boost control. The cycle/boost control/amal valve introduces a leak into that hose which is ECU controlled. This has the effect of bleeding a portion of the boost pressure that the actuator "sees" thus allowing a higher boost level to be run. A leak in that pipework has the same effect but the ECU gets into a strop when the boost goes above the commanded level. I had a roadster which happily chattered but that would have run more boost being the 80bhp version. I'd make sure it's piped up correctly.
Cheers. It feels pretty much how you'd expect a 60bhp car to feel now, pretty muscular for 698cc, so I'd say it's boosting properly. Just a shame I've lost that overboost feel!
Yes, essentially the leak made the same effect bleed valve did for 80´s turbo stuff. Except the more recent engine managament red flagged it. In earlier videos the Smart sounded surprisingly brisk!
Lesson 1 - always check hoses before suspecting a parts failure. Lesson 2 - get some cheap storage boxes, label them and start grouping parts - even just basics like "clips", "hoses", etc.. That could be a video of just discovering 'lost' parts, sorting, chatting and clearing out 😀
One of the first things i would say i don't know much about Smart car's but when it come's to Turbos especially the one's that are vaccume operating is to test all your vaccume pipes you can buy a simple vaccume pump used often for bleeding brakes for around £25. I made a video about it on the vw Passat Tdi how i could remove the turbo by simply removing a vaccume pipe. If i was you i would replace as many of them as possible they tend to break down inside and start to leak after time glad to see it up running. 👍
Yeah there's this 3rd level, deep engine tune in the Turbo Brick forum called "..replace all your PCV and vacuum hoses with high quality Silicone.." and a link to Foreign Car Parts of Groton, MA. It's mind numbingly involved and kinda pricey.
You do remind me of my brother. He buys everything at least three times as he has lost every item he has ever bought by putting it somewhere 😊😅. P.S. I see Classics World has an upgrade page for Smart Fortwo in this months edition 👍
well it's now sounding more like a smart little 3 pot engine should sound! I found them quite fun to drive, althoug not very engaging, if that combination is possible. I think it suits Mrs Hubnut very well for quite a year around ride, despite the cloth roof. When the sun pokes for some seconds in the sky, it's just a touch of a button to open the cabin up. I guess this is the only series of videos of smart maintenance I've came across on youtube and it's very detailed and useful. thank you both for the joyfulness you two have to be in the rain and cold to make these videos for us!
A few years ago I had the shear delight of doing a service including 6 spark plugs on a roadster. The customer was waiting (and watching) amd things were rather hot! So many little brittle plastic fixings! 😬
I mentioned these hoses when you first got her. Best replaced with silicone hose with either a 3mm or 4mm ID (I forget now). They're a lot more forgiving in a hot engine bay.
So many problems caused through hoses and wires touching hot surfaces in cars,but so glad you seem to have solved the problem,a day out in smartin must be on the cards ( sorry it's just a temp name I've come up with ) 😊
I like the action of the automated manual. Reminds me of the Leyland Hydracyclic that the Tigers I grew up with had for their first year before being converted to manual change.
Do you remember when mechanic wouldn’t work on original Mini’s as they thought they were too complicated? Wow. It hurts my brain watching you work on that Smart? Car. Give me a Mini any day. I also drive a Ford Falcon and a Holden Commodore. Keep up the good work.
You said it was not as boosty after the fix so it was deffo over boostying. Im happy for you and I'd leave the engine cover off. That smile on the test skive run 😂
Bring back the ptschoo - jam (I mean 'adjust') the wastegate a bit? My brother had a Fiat Punto TD70 many years ago and welded the wastegate shut. Apart from sounding like a Transit van (lots of interior space, diesel engine and not much sound proofing - so just like a Transit van), it was a bit mad - until it blew up, anyway. Good fun.
Holes in hoses would've altered the pressure which the wastegat was opening. So potential overboost which threw it into limp mode. Hence the extra flutter and peppiness before it was sorted. Glad it goes well again.
Nice that it was an easy fix (I mentioned vacuum hoses the first time) it could have been a broken brake servo which would have taken ages to fault find.
I'm glad you got the smart sorted. We had a 450 like yours and now have the 451. I prefer the engine in yours as it has a sump plug just be aware that there are 6 spark plugs on yours and the rear 3 are a pain to get too
I remember when my A3 TDI turned into an SDI. It had lost tonnes of power and the revs barely dropped when changing gear. A vacuum hose that ran from the Vacuum reservoir to the actuator arm had split. Once i replaced the hose it turned back into a TDI again
Re. Storage boxes - I'd recommend the Really Useful Boxes- they seem to be very durable and watertight which may be useful in your unit's slightly damp environment.
In one comment, you mentioned that you miss the over boost feel. Reminds me of my sister's MG. I did a tune up on it and filled the oil reservoir in the carbs. The oil keeps the slides from snapping open as quickly. Apparently the car didn't accelerate as quickly with the oil in there. She was rather grumpy that I fixed it. She liked the extra snap. I guess you can't have every thing.
Some generic remarks on these older turbo systems: * the WG valve itself should move very easy while unconnected to the rod. (It did, you showed it moving) * the rod only needs a little bit of spring preload when connected to the WG. The more preload, the faster the boost will rise and if will possibly boost spike a little. ( no need to mess with it if you are not tuning the car) * the cannister attached to the WG-rod has a membrane and a spring in it and that membrane is not allowed to leak. (If it does the boost can't be controlled and will spike on on every big throttle input) * the hose connected to the WG actuator cannister (that you fixed😅) is the boost signal line. It also shouldn't leak because it is used to push open the WG valve. * lastly there is the boost solenoid valve. It is fitted in that boost signal line and between the WG actuator and the intake manifold. My quickly cycling that boost solenoid on-off-on-off-etc the engine management computer is able to control that boost signal going to the WG-actuator, thereby controlling peak boost. Easy peazy, lemon squeezy. Isn't it? 🫠🙃😉
Ah Ian you poor naïve fool! Fancy thinking you were deciding what goes where in the unit. Despite you trying to fill the unit back up as fast as Carly empties it she is doing a fantastic job. Looking forward to road trip smart content.
A very cheap fix on the Smart car and fingers crossed it is fixed properly also Miss Hubnut is extremely organised when the tidy up is finished and the Mitsubishi Pajero Junior is in its place in the shed l hope you keep it tidy
The wastegate appeared to have a lot of play in the shaft. I'm not sure what effect that might have on the performance. Mrs H seems to have big organisational plans for the unit. Good approach.
I have a diesel smart and it was in limp all the time and dead. The trouble turned out to be the stability sensor under the left seat carpet, it had got the little fibres wrapped up, it would drive from left corner then bang the limp mode came back after a few yards. It needs a kicking about it did left turning doughnuts in a very rough carpark and it was fine after that. There were no clues as to what it was I got it at a good price after the previous owner had it in two shops trying to fix it.😅😅😅
1:27 - is that an Austin Kimberley / Tasman service manual in the autojumble box? Can I also suggest Ian that you should replace those failed hoses, taping them up is a "get you home" not a fix.
I really, really, want a Smart Roadster and I did have the chance to buy one last year but I chickened out because, much as I want one, they seem a bit fragile and a bit fiddly to work on. I still have daydreams about buying one and transplanting the oily bits out of a Toyota MR/S into it but that'll have to wait until after the big lottery win, I fear.
iI took a golf 3 tdi estate off the road after a boost to limp mode issue and 2 removal and cleans of the waste gate by a mechanic. I gave up with it. 5 years later, recently, I offered it to a mate for free. It started first time with a new battery and he reached down and found a split hose, replaced it with a scrap piece and the boost was fixed. Gutted I'd given up the car and gutted I'd given it away....
Hurrah ! Finally succes! 😉! Time for cleaning and rustproofing the smart! And the pajero and…. Treasure hunting in the barn! So much to do in so little time! Must be HubNut!😜 🫶u guys! 👍🏻👍🏻🆙
I know this is a very un-HubNut thing to do, Ian, as it seems a fun (to us) part of your videos is you looking for a piece of hose, nut or socket that you had for a specific purpose but mislaid - but maybe you could adopt a Tan Y Groes or that Lancashire dismantler’s ethic and label/store spares for your projects in a specific crates on shelves? Assuming you had room for shelves with TWC, Ellie, the smart et al in the unit and the Fairmont at home. I don’t mean going as far as QR coding everything and I don’t want you to lose the romance of it! 🙂❤️
@@HubNut Er, I mislaid my brain as just after the withering look at 1:09 you point to crates and shelves. I need to find my brain and crate/label it. 😂
Miss hubnut is fighting an uphill battle. The natural state of a garage is to be an absolute tip.
She's winning though! Even I've had enough of the mess...
My sheds reply to that is "hold my clutter"
@@HubNut Am I reading right? Hubnut had enough of mess? What universe is this?
Thank dog I'm down to one car, when there was 4 vintage Saab's in my life, the extra bits were relegated to the extra room in our rental and it started to resemble Ian's unit. at least they were boxed and marked.
Uhh!
3:19 the all knowing laugh of miss HubNut 😂😂😂😂
Miss HubNut's eye roll at about 1.09 is a picture (that paints a thousand words).
I love Ian and Carly's dynamic - it's so sweet!!!!
Sometimes you win through sheer persistence. The warm glow of success is always much better when it finally happens. Well done.
...Especially when it costs nowt!
The engine sound with the cover off was outstanding!
Those engines make a lovely noise! I really miss my Smart.
It does indeed sound amazing!
I am glad you found those broken vacuum lines and the car is running nicely. Please give Miss Hub Nut a pat on the back for me for her wonderful work in the Big Tidy!
Carly A++ for efforts in getting that place straight keep going the end is in sight ,by which I mean you can now see the floor !..
Absolutely brilliant video Ian miss hubnut ❤👍well done for cleaning up well done for fixing the smart Ian brilliant
Looking forward to seeing the PJ home and in use.
Miss HubNut's paper template/model technique is a favourite because it works so well!
Love the smile on your face as you realised that it was working! :)
Well done Ian. Cars these days seem to have more hoses than a garden centre and any one of them can cause poorly running. It's great to see the Smart, I think she needs a name now if she doesn't have one already up and running better. Beware though I think TWC and Elle might be slightly jealous as there play time on the road may be diluted with another car to share it with.
What's kinda funny is that the Smart turbo engine starts to sound like the 3 venturi carb on a Saab two stroke when the torque curve builds, it's mostly intake roar but with that 3 cylinder beat.
Wastegate actuator has a spring & diaphragm which boost acts upon. You could feel the spring on the actuator when you moved the arm. The actuator is piped to the turbo side of the boost pipework which will give you your base boost control. The cycle/boost control/amal valve introduces a leak into that hose which is ECU controlled. This has the effect of bleeding a portion of the boost pressure that the actuator "sees" thus allowing a higher boost level to be run. A leak in that pipework has the same effect but the ECU gets into a strop when the boost goes above the commanded level. I had a roadster which happily chattered but that would have run more boost being the 80bhp version. I'd make sure it's piped up correctly.
Cheers. It feels pretty much how you'd expect a 60bhp car to feel now, pretty muscular for 698cc, so I'd say it's boosting properly. Just a shame I've lost that overboost feel!
Yes, essentially the leak made the same effect bleed valve did for 80´s turbo stuff. Except the more recent engine managament red flagged it. In earlier videos the Smart sounded surprisingly brisk!
Lesson 1 - always check hoses before suspecting a parts failure.
Lesson 2 - get some cheap storage boxes, label them and start grouping parts - even just basics like "clips", "hoses", etc..
That could be a video of just discovering 'lost' parts, sorting, chatting and clearing out 😀
We've got crates. Actually having each car's parts organised is already making a difference.
I have a Smart 451, and I recognise the Smart car smile on your face! They are just such fun cars to drive.
One of the first things i would say i don't know much about Smart car's but when it come's to Turbos especially the one's that are vaccume operating is to test all your vaccume pipes you can buy a simple vaccume pump used often for bleeding brakes for around £25. I made a video about it on the vw Passat Tdi how i could remove the turbo by simply removing a vaccume pipe. If i was you i would replace as many of them as possible they tend to break down inside and start to leak after time glad to see it up running. 👍
Yeah there's this 3rd level, deep engine tune in the Turbo Brick forum called "..replace all your PCV and vacuum hoses with high quality Silicone.." and a link to Foreign Car Parts of Groton, MA. It's mind numbingly involved and kinda pricey.
Glad you got the Smart fixed. Miss Hubnut is doing sterling work in the unit.
You do remind me of my brother. He buys everything at least three times as he has lost every item he has ever bought by putting it somewhere 😊😅.
P.S. I see Classics World has an upgrade page for Smart Fortwo in this months edition 👍
The magic of three cylinders. Now with boost! Good job, Ian. And good job, Carly! Alone in the spare parts unit doing some tidying... 💥👍💥
The engine in this sounds surprisingly good! And awesome fix as well! These sorts of fixes are always so darn satisfying. :D
I feel that smile at 10.15 says it all, this is a fun car to drive
well it's now sounding more like a smart little 3 pot engine should sound! I found them quite fun to drive, althoug not very engaging, if that combination is possible. I think it suits Mrs Hubnut very well for quite a year around ride, despite the cloth roof. When the sun pokes for some seconds in the sky, it's just a touch of a button to open the cabin up. I guess this is the only series of videos of smart maintenance I've came across on youtube and it's very detailed and useful. thank you both for the joyfulness you two have to be in the rain and cold to make these videos for us!
The smile on your face at the 3 pot roar says it all…. Love my 3 pot turbo Suzuki Swift auto, love it’s roar on kick down
Your making lots of progress tidying 👍👍great you have successfully fixed the problem 👍
Congratulations on the fix!
Love the wee smile Mr HubNut near the end as your engine revs go higher 😊
Wow - Getting that bumper off is so much easier than on a 451! On them, it's the tailgate, sill covers and then rear bumper!
A few years ago I had the shear delight of doing a service including 6 spark plugs on a roadster. The customer was waiting (and watching) amd things were rather hot! So many little brittle plastic fixings! 😬
Good work that man!
...and the little grin under acceleration coming out of that bend at the end was telling.
sounds like you're on the mend now Ian, just like the engine. win-win 👍
1:09 that look 😅
I mentioned these hoses when you first got her. Best replaced with silicone hose with either a 3mm or 4mm ID (I forget now). They're a lot more forgiving in a hot engine bay.
Enjoyed that one, proper Hubnuttery!
Not quite the sound of the Mazda 787B rotary but still managed to make you and me smile on yur test drive.....
I love the sound of those little 3 cylinder Engines
Nice job 👍😀
At least the cycle valve is a spare part for a car you still own 😉
Hehe - the test drive with no engine cover made the Smart sound like a rally car 😁 - Great that it is (seemingly) working properly at last. 👌
So many problems caused through hoses and wires touching hot surfaces in cars,but so glad you seem to have solved the problem,a day out in smartin must be on the cards ( sorry it's just a temp name I've come up with ) 😊
At 6:01 I thought you dropped the F bomb, until I realised you said vacuum.
So glad you fixed it. You could get a dump valve to make it sneeze or ptchoo!
I like the action of the automated manual. Reminds me of the Leyland Hydracyclic that the Tigers I grew up with had for their first year before being converted to manual change.
Congratulations! ..and man I do enjoy a three cylinder engine note. Looking at you driving it, it seems like a fun little thing.
Do you remember when mechanic wouldn’t work on original Mini’s as they thought they were too complicated? Wow. It hurts my brain watching you work on that Smart? Car. Give me a Mini any day. I also drive a Ford Falcon and a Holden Commodore. Keep up the good work.
Excellent levels of persistence Sir.
I can see who is doing all the tidying work!
You said it was not as boosty after the fix so it was deffo over boostying.
Im happy for you and I'd leave the engine cover off. That smile on the test skive run 😂
Excellent.. just a hose , first guess 😊
A dump valve may give you the noise your after , Ian easy fit 😁
Ian, you were looking at the switching valve, the cycle valve is probably mounted on the TIK pipe (turbo intake) out of sight. Follow the hoses
Bring back the ptschoo - jam (I mean 'adjust') the wastegate a bit? My brother had a Fiat Punto TD70 many years ago and welded the wastegate shut. Apart from sounding like a Transit van (lots of interior space, diesel engine and not much sound proofing - so just like a Transit van), it was a bit mad - until it blew up, anyway. Good fun.
Holes in hoses would've altered the pressure which the wastegat was opening. So potential overboost which threw it into limp mode. Hence the extra flutter and peppiness before it was sorted.
Glad it goes well again.
Nice that it was an easy fix (I mentioned vacuum hoses the first time) it could have been a broken brake servo which would have taken ages to fault find.
glad youve found the issue ian!
I'm glad you got the smart sorted. We had a 450 like yours and now have the 451. I prefer the engine in yours as it has a sump plug just be aware that there are 6 spark plugs on yours and the rear 3 are a pain to get too
Quality tinkering episode Hubnut!
Hi Ian,
You may try silicone tape, very stretchy and keeps under high pressure. look into it! 😀
👍👍👍💪💪lovely sounding engine .
10:15 ➡️🙂⬅️
Nice progress and detective work Ian. 👋👋
By jove I think we got it!. Here was I thinking my garage was bad and full of stuff and one look at Ian's lockup ;)
You've become addicted to the overboost, but it's a good thing you replaced the leaking hoses.
I remember when my A3 TDI turned into an SDI. It had lost tonnes of power and the revs barely dropped when changing gear. A vacuum hose that ran from the Vacuum reservoir to the actuator arm had split. Once i replaced the hose it turned back into a TDI again
Re. Storage boxes - I'd recommend the Really Useful Boxes- they seem to be very durable and watertight which may be useful in your unit's slightly damp environment.
Reminds me of what a carburetor with a massive vacuum leak does for the way a car runs, or Doesn't as the case may be....Cheers
Use the spare cycle valve, a T piece and a switch to make a manually selectable Ptchoo Valve.
Yeah, I was a bit envious of your perchoo in previous videos as mine doesn't do that so in solving it you've lost that lovely noise 😥
In one comment, you mentioned that you miss the over boost feel. Reminds me of my sister's MG. I did a tune up on it and filled the oil reservoir in the carbs. The oil keeps the slides from snapping open as quickly. Apparently the car didn't accelerate as quickly with the oil in there. She was rather grumpy that I fixed it. She liked the extra snap. I guess you can't have every thing.
When you keep going back to 6mins and thinking you hear a swear word escape from hubsters mouth 😂
Even I thought it was a swear! Having reviewed it, I definitely said vacuum.
He does say “ruddy” though 😮
Good job Ian
another great video has always Ian and Carly miss/mrs hubnut and hublets and hubmutt 👍
Have you thought about getting a big skip for the stuff in the garage. You could put the Berlingo in it at the same time.
Poor Bella!
Some generic remarks on these older turbo systems:
* the WG valve itself should move very easy while unconnected to the rod. (It did, you showed it moving)
* the rod only needs a little bit of spring preload when connected to the WG. The more preload, the faster the boost will rise and if will possibly boost spike a little. ( no need to mess with it if you are not tuning the car)
* the cannister attached to the WG-rod has a membrane and a spring in it and that membrane is not allowed to leak. (If it does the boost can't be controlled and will spike on on every big throttle input)
* the hose connected to the WG actuator cannister (that you fixed😅) is the boost signal line. It also shouldn't leak because it is used to push open the WG valve.
* lastly there is the boost solenoid valve. It is fitted in that boost signal line and between the WG actuator and the intake manifold.
My quickly cycling that boost solenoid on-off-on-off-etc the engine management computer is able to control that boost signal going to the WG-actuator, thereby controlling peak boost.
Easy peazy, lemon squeezy. Isn't it? 🫠🙃😉
Your making lots of progress tidying 👍👍
Ah Ian you poor naïve fool! Fancy thinking you were deciding what goes where in the unit. Despite you trying to fill the unit back up as fast as Carly empties it she is doing a fantastic job. Looking forward to road trip smart content.
It occurred to me that you'd leave the cover off just to enjoy the sounds! 😀
A very cheap fix on the Smart car and fingers crossed it is fixed properly also Miss Hubnut is extremely organised when the tidy up is finished and the Mitsubishi Pajero Junior is in its place in the shed l hope you keep it tidy
Nicely done!
That engine sounds good! Better than the three pot in my Acty
The wastegate appeared to have a lot of play in the shaft. I'm not sure what effect that might have on the performance.
Mrs H seems to have big organisational plans for the unit. Good approach.
I have a diesel smart and it was in limp all the time and dead. The trouble turned out to be the stability sensor under the left seat carpet, it had got the little fibres wrapped up, it would drive from left corner then bang the limp mode came back after a few yards. It needs a kicking about it did left turning doughnuts in a very rough carpark and it was fine after that. There were no clues as to what it was I got it at a good price after the previous owner had it in two shops trying to fix it.😅😅😅
Ah yes. The yaw sensor can apparently go a bit wrong.
Nicely done. In true Hubnut fashion. 😉👍
Great job!
Great little tinkering Video Ian.
Most of the fittings on my front bumper are gone, so with the holes that were in place in the first place I refitted the bumper with zip-ties 😂
That green truck beside your unit looks interesting
It is. Perhaps we'll take a closer look one day.
@HubNut I've seen photos of them be interesting to hear your and misshubnuts views on one
Judging by the grin during the test drive i thought the engine cover might be staying off😂.
Free fix, that sounds an absolute hoot to drive too.
Every home should have one?
1:27 - is that an Austin Kimberley / Tasman service manual in the autojumble box?
Can I also suggest Ian that you should replace those failed hoses, taping them up is a "get you home" not a fix.
It is. And quite right.
I really, really, want a Smart Roadster and I did have the chance to buy one last year but I chickened out because, much as I want one, they seem a bit fragile and a bit fiddly to work on.
I still have daydreams about buying one and transplanting the oily bits out of a Toyota MR/S into it but that'll have to wait until after the big lottery win, I fear.
Well done. Great news🎉🎉
Yay you fixed her!
@4:52 I thought this was a family channel!
The smile as he finally understands how stiff it should be.
Miss hubnut would love that one and be perfect for the lad to learn to drive in and be very cheap insurance as well
Everyone in this family prefers manuals... Mini HubNut hates the Smart!
Carly's knowing laugh... " the rear bumper should come off, quite easily.."
iI took a golf 3 tdi estate off the road after a boost to limp mode issue and 2 removal and cleans of the waste gate by a mechanic.
I gave up with it. 5 years later, recently, I offered it to a mate for free. It started first time with a new battery and he reached down and found a split hose, replaced it with a scrap piece and the boost was fixed.
Gutted I'd given up the car and gutted I'd given it away....
I said back in a previous video that the wastegate sounded louder than stock!. Had no idea that would cause it though.
Hurrah ! Finally succes! 😉! Time for cleaning and rustproofing the smart! And the pajero and…. Treasure hunting in the barn! So much to do in so little time! Must be HubNut!😜 🫶u guys! 👍🏻👍🏻🆙
Nice easy solution - always check your hoses for holes! Did you change the spark plugs while you had the bumper off?
No, but I believe that was done in September, about 100 miles ago.
Success! Well done! Good luck with the rest of the tidying, Miss HubNut!
I know this is a very un-HubNut thing to do, Ian, as it seems a fun (to us) part of your videos is you looking for a piece of hose, nut or socket that you had for a specific purpose but mislaid - but maybe you could adopt a Tan Y Groes or that Lancashire dismantler’s ethic and label/store spares for your projects in a specific crates on shelves? Assuming you had room for shelves with TWC, Ellie, the smart et al in the unit and the Fairmont at home. I don’t mean going as far as QR coding everything and I don’t want you to lose the romance of it! 🙂❤️
Seems a bit advanced! Having a crate for each car is definitely a step in the right direction.
@@HubNut Er, I mislaid my brain as just after the withering look at 1:09 you point to crates and shelves. I need to find my brain and crate/label it. 😂
This is the first time I've seen a beer keg used as a door stop.
I've been using it since it randomly appeared a couple of years ago.
Good wholesome Hubnut fun
Congratulations to the newly rediscovered floor and the lack pichoo.