you need to put the exhaust pipe end in a tip with an open back end to introduce air again into the exhaust. like a gas burner. then you'll have REAL flames.
And I think glow plug instead of spark plug would be much simpler. Switch for glow plug and fuel pump to activate system and button for injector to instant fire starting :D
@@amigorodrigo7722 anything that will help. big thing is it needs air. then you'll combust even unspent fuel from the motor too. it'll look more like the flamethrower they want.
I remember when I watched this back then... It was epic! I hope that you are doing well and that everything is going alright... Big greetings from the Ortodox Brothers in Serbia 🇷🇸 🍻
@@the_kombinator AMG made all sorts of stuff for the 190's. My wife owned one for a few years; hers only had the body panel kit and a reprogrammed transmission. Engine was left stock. It looked great, and the aggressive transmission made it much more fun to drive, but the 190 clearly did not have the solid build quality of higher end models.
Me : sees the video only fans tinders.club/AGNEZ " Alright I think that's enough for today " My mom: makes soup Me : OK IM DONE Ello everyone if you are bored comment in my comment cause I'm also bored. :)..
Needs to have fresh air fed in before the ignition point, just like with a carb it needs to have a proper air-fuel mix to sustain a burn, the exhaust gases from the engine contain mostly CO2 plus other compounds that inhibit the combustion process, which is why it kept blowing the flames out when revving... :)
They actually could have used a part of her engine for this video. They needed something like a flame tube which is like pilot light for the jet engine. It's just a tube with a flame that's protected from the airflow of the jet. The issue they have in this episode is the gas isn't in contact with the spark long enough to ignite.
I have seen people do this with hot rods. Some use gasoline and some use propane. Propane is a little spooky. I have seen exhaust get red hot from using propane. Also they don't have any restrictions in the exhaust like a catalytic converters and or resonators.
I have seen this sort of thing before but without the fuel injector on cars that don't have catalytic converters. The unburned fuel is enough to create the flame. Sometimes there is a hole cut out too to allow oxygen in.
Back in the day we used to put gas bottle in the boot and put spark plug in exhaust and a coil and a electric motet to drive a rotor arm it would spin and make spark using points. You can get big long flame it works well my mate still has his set up on a Ford cosworth and won some shows back in the late 1990s
Crazy as usual and that's not bad. Hey guys i think if you add some Oxygen before the spark plug you will get the flame you want or at least some compressed air. The Nox from the exhaust is choking the flames i believe. Thanks guys you have so much fun i love it shenanigans...
@Garage 54 you should relocate the fuel injector way back from a spark plug, as on my system before the last muffler and you should open spark gap a little or use 4 teeth spark plug
I think that installing the injector closer to the engine might have been a good help since the fuel would have more time to heat up and evaporate, making it much more flammable
I seen this video years ago wen it didn't have the English voice over & still use to love watching um...glad na days can lisson to what's happening on the video na days awsome stuff lads keep up the crazy car experiments from Notts modified car channel 😃
Did this to my first car, except I hooked a switch the my ignition coil so the car would no longer fire the mixture and it would go out the exaust. So I could either light it with a spark plug I had back there or I could flip the switch for the coil back of for a super loud backfire and flame. Also being hooked directly to the engines fuel system you could control the backfire sound and the size of the flame by adjusting how high you rev the engine before killing the switch and how much throttle you gave it when it was off.
@@James-hy8gu Sometimes you simply cant squeze your head with a welding mask somewhere and weld comfortably. Obviously welding with a mask is better in a long run, you can clearly see what you're doing. For tacking however you sometimes have to weld without mask and thats the only useful advice I can come up with based on my welding experience. Also try welding inside wheel arch with a welding mask, totally impossible...
Me : sees the video only fans tinders.club/AGNEZ " Alright I think that's enough for today " My mom: makes soup Me : OK IM DONE Ello everyone if you are bored comment in my comment cause I'm also bored. :)..
I want the colored flames like in TFATF! I assume without movie trickery, you would use some sort of catalyst in the flame path? Watching him drive, it might be cool to have a flame spit on each shift.
You should have made a flame tube that's shielded from the wind. The issue they have in the video is the gas isn't in contact with the spark long enough to ignite plus they need to tune the gas flow.
Me : sees the video only fans tinders.club/AGNEZ " Alright I think that's enough for today " My mom: makes soup Me : OK IM DONE Ello everyone if you are bored comment in my comment cause I'm also bored. :)..
Love this show because the guy making it doesn't turn it into his own personal little 5 seconds of Fame and shoot his mouth off about stupid stuff like most RUclips videos are.. ..
Me : sees the video only fans tinders.club/AGNEZ " Alright I think that's enough for today " My mom: makes soup Me : OK IM DONE Ello everyone if you are bored comment in my comment cause I'm also bored. :)..
a solution to the blow out problem is to make fake exhaust tips and reroute the actual exhaust out the side of the car. plumb the flame to the fake tips.
A question for ya ...can you figure out how to make turbo spool up sounds whith a no turbo car ?I was thinking that possibly a impella in exaughst hooked on to a bearing assembly inside the exhaust so nobody can see it and the higher output of exaughst the faster it would spin hopefully making turbo noise lol .if not possible one of those whistles that you can use like a trombone in exhaust as well the same way .I think it would make a great video..but love the vids and ya all .godbless and stay safe
Man, theses guys have gone a long way from 2017 to today. Great content as always 😊
And they don't seem to stop getting ideas for content even after all these years. That amazes me the most.
Bug Up for Vlad and the crew.
I agree, despite this video seeming like they sold there so and Vlad is in his house garage.
Some of them just watch guys working if you know what i mean😂😂😂😂😂
smiles no one will tailgating you when the flame bursts out the exhaust! It's a great safety feature
@@TheDeepDiveLLC huh? Sold what?
you need to put the exhaust pipe end in a tip with an open back end to introduce air again into the exhaust.
like a gas burner.
then you'll have REAL flames.
Yup
And I think glow plug instead of spark plug would be much simpler. Switch for glow plug and fuel pump to activate system and button for injector to instant fire starting :D
@@amigorodrigo7722
anything that will help. big thing is it needs air. then you'll combust even unspent fuel from the motor too.
it'll look more like the flamethrower they want.
Something like the exhaust tip newer diesel pickups have.
@@taylorlang1226
even drilling some holes in the back of that one would make a huge difference.
7:33 not everybody will approve, but when did THAT ever stop us? epic
I remember when I watched this back then... It was epic!
I hope that you are doing well and that everything is going alright...
Big greetings from the Ortodox Brothers in Serbia 🇷🇸 🍻
2:10 looks like an Improvised Explosive Device. 😂😂
AMG already gets shitty mileage, "Let's add a whole other way to burn fuel!"
Ahh yes, good advice for the many people who buy an AMG Mercedes for the good mileage.
I'm willing to bet that this is, in fact, NOT an AMG.
@@the_kombinator yeah I probably isn't
@@High-Overlord-Snarffie-Pug I watched enough of the early G54 to know it wasn't ;)
@@the_kombinator AMG made all sorts of stuff for the 190's. My wife owned one for a few years; hers only had the body panel kit and a reprogrammed transmission. Engine was left stock. It looked great, and the aggressive transmission made it much more fun to drive, but the 190 clearly did not have the solid build quality of higher end models.
This is the ultimate anti-tailgater device. 😂😂
When you ignite the afterburner on the Batmobile 😂😂
Pulse jet on a lightweight lada. You can do it.
Me : sees the video only fans tinders.club/AGNEZ
" Alright I think that's enough for today "
My mom: makes soup
Me : OK IM DONE
Ello everyone if you are bored comment in my comment cause I'm also bored. :)..
Smiles no one dare to tailgate you when that flame bursts out the exhaust!! Great safety feature
Man they’ve had come a long ways since then! Great video!
Now have a real rear-facing flamethrower
Needs to have fresh air fed in before the ignition point, just like with a carb it needs to have a proper air-fuel mix to sustain a burn, the exhaust gases from the engine contain mostly CO2 plus other compounds that inhibit the combustion process, which is why it kept blowing the flames out when revving... :)
Put jet engine in the car
there is already jet powered bmw but different channel did- " BMW with a jet turbo engine "
No put a rocket engine in the car
They actually could have used a part of her engine for this video. They needed something like a flame tube which is like pilot light for the jet engine.
It's just a tube with a flame that's protected from the airflow of the jet.
The issue they have in this episode is the gas isn't in contact with the spark long enough to ignite.
Mounting the spark plug and injector further forward in the exhaustsystem gives a 200% better resultat.....longer flames with banging sound...
Can you find a way to turn the exhaust into a soap bubble blower then go for a nice drive around town?
I genuinely love this channel
How did my buddy 20 years rig this on his 64 impala and it worked perfectly! Grats Maurice!
I have seen people do this with hot rods. Some use gasoline and some use propane. Propane is a little spooky. I have seen exhaust get red hot from using propane. Also they don't have any restrictions in the exhaust like a catalytic converters and or resonators.
Crazy buggers!! Looked great!! Try again with 2 injectors, further up the exhaust!!
I have seen this sort of thing before but without the fuel injector on cars that don't have catalytic converters. The unburned fuel is enough to create the flame. Sometimes there is a hole cut out too to allow oxygen in.
Back in the day we used to put gas bottle in the boot and put spark plug in exhaust and a coil and a electric motet to drive a rotor arm it would spin and make spark using points. You can get big long flame it works well my mate still has his set up on a Ford cosworth and won some shows back in the late 1990s
Crazy as usual and that's not bad. Hey guys i think if you add some Oxygen before the spark plug you will get the flame you want or at least some compressed air. The Nox from the exhaust is choking the flames i believe. Thanks guys you have so much fun i love it shenanigans...
FIRESTARTER TWISTED FIRE-STARTER 🔥🐜🦀
Always a good day to see where it all started!
Is this an old video??
@Garage 54 you should relocate the fuel injector way back from a spark plug, as on my system before the last muffler and you should open spark gap a little or use 4 teeth spark plug
I think that installing the injector closer to the engine might have been a good help since the fuel would have more time to heat up and evaporate, making it much more flammable
I have a video of that I just pops and bangs.
I seen this video years ago wen it didn't have the English voice over & still use to love watching um...glad na days can lisson to what's happening on the video na days awsome stuff lads keep up the crazy car experiments from
Notts modified car channel 😃
@Not Name Yet note wrong with yo mama injoy a quick flame 🤣
To make that work install a Venturi valve to draw air with your fuel.
Did this to my first car, except I hooked a switch the my ignition coil so the car would no longer fire the mixture and it would go out the exaust. So I could either light it with a spark plug I had back there or I could flip the switch for the coil back of for a super loud backfire and flame. Also being hooked directly to the engines fuel system you could control the backfire sound and the size of the flame by adjusting how high you rev the engine before killing the switch and how much throttle you gave it when it was off.
I assume when you cut the ignition back on it wasn't too smooth
Welding without a mask. I bet this eyes will feel great that night
Just cover the arc with the welder tip and close one eye - eyes wont hurt :D
@@tomekl119
Terrible advice..
@@tomekl119 pretty sure the arc is bright enough that won't help closing your eyes.
@@James-hy8gu Sometimes you simply cant squeze your head with a welding mask somewhere and weld comfortably. Obviously welding with a mask is better in a long run, you can clearly see what you're doing. For tacking however you sometimes have to weld without mask and thats the only useful advice I can come up with based on my welding experience.
Also try welding inside wheel arch with a welding mask, totally impossible...
@UC5ntH8A8zVLCpoxojAj6xNg yeah mate, there are welding commentary experts, and then there are people who actually weld :D
Love this show! LOL For exactly reasons like this. Doing all kinds of interesting things.
Me : sees the video only fans tinders.club/AGNEZ
" Alright I think that's enough for today "
My mom: makes soup
Me : OK IM DONE
Ello everyone if you are bored comment in my comment cause I'm also bored. :)..
This Invention is great for tailgaters
that device would get you crash tackled by cops in the west LOL
Wow, this is an old one. I remember that cave of a shop
Awesome video garage 54
What about driving on vaccum formed tyres filled with air inside? Or Balloon tyres?
I like it,FLAME ON !!! 🔥
I want the colored flames like in TFATF! I assume without movie trickery, you would use some sort of catalyst in the flame path?
Watching him drive, it might be cool to have a flame spit on each shift.
We use to do something similar on our square bodies. Used propane as the fuel source tho. Never crossed my mind to use gas.
Propane is gas DOH
How funny would this be on a tesla 😂
Ha...yes, or even a fake tailpipe with a fog generator so that it looks like it's "engine" is burning oil.
You should check what the guy at the Warped Perception channel did to his Tesla.
Whoo hoo! Y’all back up to 661k subs! 😁
Just like the old school flamethrowers
You should have made a flame tube that's shielded from the wind.
The issue they have in the video is the gas isn't in contact with the spark long enough to ignite plus they need to tune the gas flow.
Me : sees the video only fans tinders.club/AGNEZ
" Alright I think that's enough for today "
My mom: makes soup
Me : OK IM DONE
Ello everyone if you are bored comment in my comment cause I'm also bored. :)..
Yes finally beeen trying to make my own for so long 🙌💯
I noticed lots of re-uploads lately. Hopefully everything is OK.
"yes office, is stock."
@Not Name Yet what are you? 8??
My father does fireballs as a hobby and has been around the country. Look up , fireball dudes
this is the ultimate tailgate deterant. lol молодец.
Love this show because the guy making it doesn't turn it into his own personal little 5 seconds of Fame and shoot his mouth off about stupid stuff like most RUclips videos are..
..
.
I think the problem is the exhaust gas doesn't have any Oxygen in it.
Test drive that vehicle to Yakutia on winter for that flame.
You should connect a relay to a ignition coil pack and connect a switch to a relay which will cut the spark when you press it.
Me : sees the video only fans tinders.club/AGNEZ
" Alright I think that's enough for today "
My mom: makes soup
Me : OK IM DONE
Ello everyone if you are bored comment in my comment cause I'm also bored. :)..
That car is worth an absolute fortune where I come from.
Try it on a diesel. Plenty of oxygen in the exhaust at low load and much greater flow too.
diesel is not burning duhh....
That was fun!
How about a giant blowtorch out the pipe? Blue flame stuff
That be a cool idea 👍
U need the injector and plug further back. The injector should be a little bit further away from the plug too
Better than salt grit
Hello
Please make video about "tom ogle" idea in1970 for fuel saving and efficiency
(100mpg)
Ty for the videos u make, gjob 😊
I really want this on my Tesla
move the spark plug 8 inches in and you might have better luck getting it to light at higher rpm
Colin Furze:
Hold my insanity.
Pls help, where can I find the videos without the voice over?
a solution to the blow out problem is to make fake exhaust tips and reroute the actual exhaust out the side of the car. plumb the flame to the fake tips.
What every civic driver thinks they do at 3am:
Nitromethane afterburners 🤔. That should work. 😉
can you make a with as many engines in it as possible to make the car go faster
I wonder if Vlad started with the videos at home then it took off and he started doing them in the bigger garage.
Try it witouth the injetor. It aould work att high rpm
2017 ?
How many more undubbed Videos are left there ?
Yes sir
Plz make anti lag bang bang system on lada
Now I'm wondering if Vlad has got still his old Merc...
the aspect radio gets wider each video
Your exhaust doesn’t have oxygen in it (if the car is running right). You needed some holes in the exhaust ahead of this to let air in.
Mr slam wins this round of twisted metal I guess
Bypass valve for higher RPMs
Older episode?
Like your videos!!:)
A question for ya ...can you figure out how to make turbo spool up sounds whith a no turbo car ?I was thinking that possibly a impella in exaughst hooked on to a bearing assembly inside the exhaust so nobody can see it and the higher output of exaughst the faster it would spin hopefully making turbo noise lol .if not possible one of those whistles that you can use like a trombone in exhaust as well the same way .I think it would make a great video..but love the vids and ya all .godbless and stay safe
They have things on Amazon you put in the exhaust tips that make a spool sound. They even have fake blow off valves.
Imagine connecting a trumpet to the exhaust and going for a nice drive around town
oxygen propane injection in the exhaust to speed up the spool time of a very large turbo charger...
they used propane in the orginial fast and furious movie
when the "special military operation" bs is over i see them revisiting this with epic results!!!
reactions on vid would have been nice!
u are one funny man . hope you are ok !
just kill one or two spark plugs of the 6 cylinder when you activate the system, so it will bring extra oxygen
maybe not enough oxygen inside the pipe, but plenty in the atmosphere outside?
Absolute hooligans lol
Was this *the* garage #54 your channel name is based on or is that something completely different?
Rupee pakotteet pureen. Tilat selkeesti jo kokenut jonkin sortin inflaatiota.😂
Voi sviddu 🤣
Need a wot box 👍
yall are awesome
then why are you not watching their real channel then?
Install glowplug instead.
Nice
Reconfigure so it will at least shoot at least a 20 foot flame.
Plz made anti lag surket
Special Operation Z
Paint a car 🚗 with ballpoint pen ink
Yup yup !!!!