- We appreciate your Support and Purchases! - Next-Gen - OBDeleven VW and Audi Scan Tool HERE www.shopdap.com/nextgen-obdeleven-ios-android-vw-audi-scantool.html Older Android Style OBDeleven Pro Scan Tool www.shopdap.com/obdelevenpro-vw-audi-scan-tool.html
Hi Sir, You changed last digital from 0 to 1 that is different number with the picture you took from the battery and why the test is still successful? Do you need change it back to 0 or not? many thanks.
Wow I came back from a deployment a few years ago to a dead battery and had no idea I was supposed to reprogram it. This would of saved me from having to buy a whole new battery almost 6 months later. Thanks for the videos guys!
They could just as easily have a reset function, like the oil change and Inspection reset. The system just needs to know that the part is new. The fact that they look for part#, vendor code, and serial # is to reinforce the idea that you must have a genuine Audi part. This will work on many folks who do not know better, and go to the dealer and drop $350 on a batt that can be had for $150. I have a family member who recently went to Benz dealer for her car and way, way overpaid for a battery. And the dealer reinforced the idea with her, that you should never use a 3rd party batt in your car, " because it will cause so many problems" .... Marketing BS. Knowledge is power.
are you sure on this and that the bem code contains no information as to the battery capacity and type? (agm vs we cell, which have different voltages, and affects how much charge the car sees it needs to give...
@@wrxkyle That's a very fair point. I guess I'm thinking that you would only put an AGM, but you could do a traditional batt. and that info would indeed matter.
@@wrxkyle my car needs the part number because it contains the correct AH of the battery. I replaced my battery recently and the car wouldn't charge it past 80%. I changed the serial number in Vcds by 1 digit and the car then knew it was a new battery and allowed it to charge to 100%. The new battery would have failed prematurely as it wasn't fully charging.
Guys, I changed the battery on my 2012 Audi A6 without reprograming the code, which was years ago. The battery works fine and still going great! I got the battery from Costco for about $150. I don't think the coding does anything other than to scare you enough so that you pay the dealer $450 to do it. As an electrical engineer, I measured the charging voltage during charge and the end of charge. There is little Audi can do to screw up a lead-acid battery.
Great video. Addressed every single question that I had about changing the battery in my A4. The dealership wants 1 hr of labour to recode. Seems absurd after having watched this.
Requiring a serial number to change a battery is stupid, the car already knows how much voltage the alternator outputs, days and mileage since last battery service, all it needs is a “Reset Battery Life” option in the same service menu as the oil change and brake pad resets.
You can just make a serial number up. So long as the car sees a new serial number it will recognise it as a different battery. Common advice is to just change the last digit. A option in the service menu would be convenient though.
You're absolutely correct but a lot of people don't know and it does work cuz I'm a mechanic too if you have a power source plug it into the cigarette lighter make sure you have a power jump box of boost one that actually could charge to a lot of connections to connect the power source to the two terminals of the jump box and then disconnect your battery and you won't lose any of your data connected back you won't even have to program it I do it all the time
I remember visiting the local Audi tech maybe 5 years ago and he was changing a battery like this. "Will you look at this shit?" or something to the extent of that was said. I get that Germans do crazy shit, but man, a battery shouldnt be this involved to change, or am I crazy? :)
Tbh they should've made batteries last the life of the cars by now. Even Tesla is only now starting to do it for the 12V system. Lead acid technology is as old as cars are. A typical gas car could do just fine with some 20Ah lithium pack. I'm waiting to see what type of battery Tesla is going to use for functionality in colder climates.
I changed mine right before it died! It was really low! I used a jumper to foul the computer that battery was fine and I installed the new battery! That’s was About 2 years ago and it’s still running good 👍🏻
Hi there! Well one day! I tried to start my vehicle and I did.. but barely so I knew that battery was going out.. So I got a new battery with the exact serial number.. and before I disconnected the old one.. I hooked up the jumper to the terminals tu and turned on the jumper on a boost mode! And then I disconnected the battery.. then I put the new battery hooked the terminal and removed the jumper.. and I didn’t have to program anything.. and I did it right out side the Audi dealership! when I took in the battery core! They asked me how did you do it?! Lol.. and I told him and they just huh 🤔 lol! Well it worked 🤙🏼😎
Battey needs to be coded because based on the voltage of the battery, the alternator will ramp up charging as the battery gets older? WHY is the car not smart enough to read the new battery and figure out the new battery has higher voltage on its own?? 🤔🤔🤔
My 2011 VW CC wasn't programmed from the factory even. Later the battery was replaced for a genuine (Varta) & the dealership didn't re-program. I did it myself via VCDS, and it was much simpler than this OBD11, don't need these codes, except one correlating to battery capacity if I remember correctly.
Very helpful video...but my OBD app has a different screen. Is it different on an iPhone versus Android? Also, when I enter in the serial info and part number it keeps telling me "wrong entry", even if I just repost the current info. Any tips?
thank you for this, was wondering where to find the setting in OBD 11 to change it, one question though, do we do this before we set the car slightly on fire? is being slightly on fire step one of this process?
thanks for the explaination ralph. i was about to not code and i only stopped because i noticed the battery (new) was getting really hot after only a drive.
I'm from Mexico and I just installed a new battery in my Leon Mk3. The battery had no BEM code, but the adaptation battery only asked for Ah capacity, vendor and serial number. I changed the original efb battery for a agm battery. By the way, I changed the battery 'cause it had almost 4 years. It worked fine but the midtronics says replace battery. I prefer to replace battery before it fails.
Awesome video Paul! I love seeing these S4 OBD eleven tutorials as the software interface has changed (it was different when you showed how to pull the trans temp in the dsg fluid DIY video). Would you be interested in making these OBDeleven tips into a series? I would love to see how to do certain adaptations such as the throttle body alignment/adaptation, as well as DSG calibration adaptations. Keep up the good work!
Thanks for the video! Upgraded my B8.5 to a Braille Endurance battery. The #s on the battery are not enough for the coding. So I just changed the last two digits of what was already in the system and saved it as it was accepted during the test. We shall see!
My 2017 B9 A4 doesn't show "Long adaptation" in my OBDEleven menu. It only shows "Adaptation." It gives you the option to change the Amp hours (Ah), the manufacturer code and the serial number. I hope this works.
At what point in time did it become necessary to reprogram the charge rate on an Audi car when replacing the battery and is it this procedure required on a 2011 Audi A3?
I replaced my original battery to Optima AGM, Neither Autel or OBD11 is asking to input battery type (AGM) or Ah. I just inputed BEM/manufacturer/serial number, is that all that is needed to input? Does the car know the Ah and AGM change?
I never knew changing an Audi battery was this complicated. Is the power management system in an Audi A4 1.8T integrated into the battery or is it a separate module that has to also be replaced when changing the battery?
We are getting to a point that you will have to reprogram your weight to the car in order to run properly. And I eat a double meat cheeseburger, you will need to reprogram that as well. Do not add the bacon to the burger, or else the car won’t start, and will tell you. “U need to go walking (Audi voice)”
In the Audi warranty & maintenance booklet it references filling the battery at a certain mileage. Is that a hold over from Europe or are these batteries servicable?
Hi, I have to remove the battery for an upcoming indoor car show so I will be reconnecting the existing battery. If that's the case do I need to update the info if it's still reading the info from the previous coding which would be the same battery I'd be reconnecting?
Great video, question on an older Audi like for example on a 1998 a4 model is it also necessary to program the battery to the vehicle or is this for newer models?
I bought a dashcam and an external battery for my 2019 Golf R. When direct connecting to the fuse panel I would assume I need to disconnect the cars battery first when dealing with the fuse panel? Will I need to recode the car if I disconnect the battery?
B7 Audi A4 Avant Quattro here, I just had my battery and stuff tested and they said i need a new voltage regulator and to replace the entire alternator. Can I get a way with just replacing the VR?
do you suggest connecting a spare battery for the duration of the swap so that computer is still powered memory memory is not cleared? I also saw a case where the radio was asking for a code after battery was swapped. why does that happen?
im just not sure i can buy into it ... so you are saying the car can "sense" an old degraded battery and increase the power output for a dying battery .. but then again cant " sense" the output of a new battery and will overcharge it ? .. it it just me ?
FWIW I tried to follow this and it would not take the serial, even with the spaces and also trying to use the random # thing for the serial numbers after the mfr code. I ended up having to use may clunky hand scan tool to perform the function.
How do you perform a physical boost leak test on a Mk7 GTI? I did mine incorrectly and some oil shot out my timing chain cover because I didn't leave my oil filler off. Please make a video on this .
What to do if the battery has no Bem code. It say on the last part of the video. So basically just copy those number and change a couple? I tried so many scanner but none of them work. I will try this obd2 that you using. You only need to pay for that device then nothing more? Also I just want to Add. I have 2013 audi A4. The first 3 years I swapped the battery without registering it. I used autozone battery agm. They most expensive one they have $250. Believe it or not 6 years still running. After 6 years still tested good but I replaced it anyways. I just found that battery only last 3-5 years so I replaced mine eventhough still running good just to have peace of mind. Now I just need to figure out how to register autozone battery. It lasted 6 years the last time without register so I guess I’m good hopefully
I got a audi a1 sportback i want to change batt bcas start stop stopped working do i have to code new battery in it has a agm battery in but no start stop working
Wonder if I could get your professional opinion. The battery in my A7 died suddenly, no slow decay, just one day wouldn't turn on and was sitting at basically 0V. After some research and decidedly not wanting to spend $400 on a battery recode, I decided to hook the car up to a charger and then hot swapped the battery while the system was running from the charger. I did this in case Audi would notice and acknowledge the disconnecting of the old battery and potentially stop me from driving with an non-official replacement; just being overly cautious. I do however have an OBD11 but did not know I could recode it myself, do you recommend this now a few thousand miles after the initial replacement?
Very interesting , went to Audi and was quoted 400 euros to supply and fit and code a new battery , when asked what the guarantee was they said 2 years ! How many correctly coded batteries don't last that long ?
My question is not to replace but maintain when not using the vehicle, how many amps should a trickle charger to charge it have? Or is there a nice brand you’d recommend.
I did what you said and followed the instructions on everything. The only thing is my GTi change to an Audi S4 when I was done and now the car laughs at me when I try to start it up. Says something like "try again B!". WTH 😳
I just changed my battery and the new part number is only 10 digits instead of 11 like the original battery and it says wrong value when I try to code it..any help?
I have a OBDeleven…no pro. It lets me input the battery info but not rewrite the new battery info. Do I have to upgrade to a pro or is there a way to make the system accept the new input?
- We appreciate your Support and Purchases! -
Next-Gen - OBDeleven VW and Audi Scan Tool HERE
www.shopdap.com/nextgen-obdeleven-ios-android-vw-audi-scantool.html
Older Android Style OBDeleven Pro Scan Tool
www.shopdap.com/obdelevenpro-vw-audi-scan-tool.html
Hi Sir, You changed last digital from 0 to 1 that is different number with the picture you took from the battery and why the test is still successful? Do you need change it back to 0 or not? many thanks.
Mechanics: changing a battery is so easy!
German engineer: hold mein schnapps.
😂🤣
Great to see the Germans making a simple battery swap into a weekend project.
Yeah it’s pretty shit. I didn’t code mine as per the explanation previously and it didn’t deteriorate the battery.
Hysterical. Great point. I’m not especially car savvy but changing a battery in the old days was definitely within my scope of competence.
@@eeiko321 ääääüüüü PP
😂😂😂
LOL But man it's worth it all the other weekends 😂
Wow I came back from a deployment a few years ago to a dead battery and had no idea I was supposed to reprogram it. This would of saved me from having to buy a whole new battery almost 6 months later. Thanks for the videos guys!
Did you get an oem replacement or or go with a battery from your local auto shop
They could just as easily have a reset function, like the oil change and Inspection reset. The system just needs to know that the part is new.
The fact that they look for part#, vendor code, and serial # is to reinforce the idea that you must have a genuine Audi part. This will work on many folks who do not know better, and go to the dealer and drop $350 on a batt that can be had for $150.
I have a family member who recently went to Benz dealer for her car and way, way overpaid for a battery. And the dealer reinforced the idea with her, that you should never use a 3rd party batt in your car, " because it will cause so many problems" .... Marketing BS.
Knowledge is power.
ShopDAP should do a collab with Louis on right to repair :)
are you sure on this and that the bem code contains no information as to the battery capacity and type? (agm vs we cell, which have different voltages, and affects how much charge the car sees it needs to give...
@@wrxkyle That's a very fair point. I guess I'm thinking that you would only put an AGM, but you could do a traditional batt. and that info would indeed matter.
@@wrxkyle my car needs the part number because it contains the correct AH of the battery. I replaced my battery recently and the car wouldn't charge it past 80%. I changed the serial number in Vcds by 1 digit and the car then knew it was a new battery and allowed it to charge to 100%. The new battery would have failed prematurely as it wasn't fully charging.
Any way to do this without a laptop?
This is by far the most helpful youtube channel for S4 owners. thank you
Holy crap. This is good timing. I literally just found out my old battery is near the end of its life and began looking into replacing
I changed AGM battery on 2012 VW Passat and it is after 18 months currently still working great without any coding
Guys, I changed the battery on my 2012 Audi A6 without reprograming the code, which was years ago. The battery works fine and still going great! I got the battery from Costco for about $150. I don't think the coding does anything other than to scare you enough so that you pay the dealer $450 to do it. As an electrical engineer, I measured the charging voltage during charge and the end of charge. There is little Audi can do to screw up a lead-acid battery.
Great video. Addressed every single question that I had about changing the battery in my A4. The dealership wants 1 hr of labour to recode. Seems absurd after having watched this.
I mean, it does take time, its not like they will charge 1/2 hour instead of 1 hour. You pay by the hour.
@@CarsandCoding Auto mechanics routinely charge for partial hours; i.e. 2.4, 1.6, 3.5 etc.
Requiring a serial number to change a battery is stupid, the car already knows how much voltage the alternator outputs, days and mileage since last battery service, all it needs is a “Reset Battery Life” option in the same service menu as the oil change and brake pad resets.
I fully agree with this. 👍
You can just make a serial number up. So long as the car sees a new serial number it will recognise it as a different battery. Common advice is to just change the last digit. A option in the service menu would be convenient though.
This might be late to ask but where would one find this serial number? If it’s the battery, wouldn’t it be located someplace on it?
Johnson Controls makes the OE battery and they make Autocraft, which has codes embossed in the plastic. It’ll work.
I was expecting Scotty when that truck popped open 😂😂
💀💀💀
Rev up your engines
@@andrewhouldcroft1116
Scotty’s old celica it is much better
This new Audi’s are just a pile of junk
YAY GOOD Start for more videos for the Audi s4!!! Let’s go!!
You're absolutely correct but a lot of people don't know and it does work cuz I'm a mechanic too if you have a power source plug it into the cigarette lighter make sure you have a power jump box of boost one that actually could charge to a lot of connections to connect the power source to the two terminals of the jump box and then disconnect your battery and you won't lose any of your data connected back you won't even have to program it I do it all the time
I remember visiting the local Audi tech maybe 5 years ago and he was changing a battery like this. "Will you look at this shit?" or something to the extent of that was said. I get that Germans do crazy shit, but man, a battery shouldnt be this involved to change, or am I crazy? :)
wEiGhT dIsTrIbUtIoN
Tbh they should've made batteries last the life of the cars by now. Even Tesla is only now starting to do it for the 12V system. Lead acid technology is as old as cars are. A typical gas car could do just fine with some 20Ah lithium pack. I'm waiting to see what type of battery Tesla is going to use for functionality in colder climates.
I changed mine right before it died! It was really low! I used a jumper to foul the computer that battery was fine and I installed the new battery! That’s was About 2 years ago and it’s still running good 👍🏻
Please explain how you used the jumper
Hi there! Well one day! I tried to start my vehicle and I did.. but barely so I knew that battery was going out.. So I got a new battery with the exact serial number.. and before I disconnected the old one.. I hooked up the jumper to the terminals tu and turned on the jumper on a boost mode! And then I disconnected the battery.. then I put the new battery hooked the terminal and removed the jumper.. and I didn’t have to program anything.. and I did it right out side the Audi dealership! when I took in the battery core! They asked me how did you do it?! Lol.. and I told him and they just huh 🤔 lol! Well it worked 🤙🏼😎
Am trying to understand this I need to replace my battery
You need obd11 it’s about$100 but it will be worth having one in the future to troubleshoot check engine lights etc.
I put a generic battery in our Q7 and just changed one digit like you did. Seems to be ok so far. It's been about a year.
Did you not change the battery brand in the software? Or what about Ah?
@@Tinez87 it wasn’t a brand that was listed. It was an Exide. I think changing the serial number just resets the state of health calculations.
@@dB_944 Ahh ok so changing the serial is enough for the car to reset and recognise the new battery and charge it accordingly?
@@Tinez87 well, it seems to have worked so far. It’s been 3-4 years since.
Solid Scotty K moment 0:36 gave me a good laugh.
I was ready to rev up my engine
Battey needs to be coded because based on the voltage of the battery, the alternator will ramp up charging as the battery gets older? WHY is the car not smart enough to read the new battery and figure out the new battery has higher voltage on its own?? 🤔🤔🤔
My 2011 VW CC wasn't programmed from the factory even. Later the battery was replaced for a genuine (Varta) & the dealership didn't re-program. I did it myself via VCDS, and it was much simpler than this OBD11, don't need these codes, except one correlating to battery capacity if I remember correctly.
ALSO! Be careful not to touch the ECM on the positive terminal of the battery!!!
Very helpful video...but my OBD app has a different screen. Is it different on an iPhone versus Android? Also, when I enter in the serial info and part number it keeps telling me "wrong entry", even if I just repost the current info. Any tips?
Got it, remove all the bolts in the rear of the vehicle and install 😂.
thank you for this, was wondering where to find the setting in OBD 11 to change it, one question though, do we do this before we set the car slightly on fire? is being slightly on fire step one of this process?
Save the matches for when you screw it up. See step 2.
Awesome video. Nice explanations.
thanks for the explaination ralph. i was about to not code and i only stopped because i noticed the battery (new) was getting really hot after only a drive.
Can I use Autel MX808 to recode the battery? And do I need to do the same on a 2016 Audi S6?
Really appreciate this video. Made the install and coding super easy. Thank you 🙏
Perfect timing, my s5 wasn’t cranking, battery just tested at 8.5V so definitely looking at a replacement
is there a specific year they started this in? i work at an auto parts store and id rather not sell a customer a battery for it to die right away
I'm from Mexico and I just installed a new battery in my Leon Mk3. The battery had no BEM code, but the adaptation battery only asked for Ah capacity, vendor and serial number. I changed the original efb battery for a agm battery. By the way, I changed the battery 'cause it had almost 4 years. It worked fine but the midtronics says replace battery. I prefer to replace battery before it fails.
Awesome video Paul! I love seeing these S4 OBD eleven tutorials as the software interface has changed (it was different when you showed how to pull the trans temp in the dsg fluid DIY video). Would you be interested in making these OBDeleven tips into a series? I would love to see how to do certain adaptations such as the throttle body alignment/adaptation, as well as DSG calibration adaptations. Keep up the good work!
Yeeeaaasssss This.
Oh yes 🙂 DSG adaptations 😃
Yesss
Massive battery! Thank for the video.
Good info. 👍 Had no idea it had to be programmed.
Alright. Now, can we get a rear diff fluid change DIY? I heard you may need to code that as well after changing both gear and ATF oil. Please.
Yesss
S4 content has returned. Thanks!
Thanks for the video! Upgraded my B8.5 to a Braille Endurance battery. The #s on the battery are not enough for the coding. So I just changed the last two digits of what was already in the system and saved it as it was accepted during the test. We shall see!
how did it go?
@@zendaq no problems
@@daveevans7151 did u change the last letter, or the last number of the #s
@@zendaq no, I just changed that last two numbers before the the letters at the end.
My 2017 B9 A4 doesn't show "Long adaptation" in my OBDEleven menu. It only shows "Adaptation." It gives you the option to change the Amp hours (Ah), the manufacturer code and the serial number. I hope this works.
So my battery doesn’t say VAO it’s say CCL with numbers and letters but I still coded it in it
Just a heads up, I bought a brand new battery from the local Audi dealership with no BEM code sticker today.
How much was the battery? Any issues since you've replaced it?
At what point in time did it become necessary to reprogram the charge rate on an Audi car when replacing the battery and is it this procedure required on a 2011 Audi A3?
+1
Awesome video. Is this the same basic procedure for the 2017 Audi A4?
Thank you for educating us on this, personally I had no idea it was a thing! What year did this become a requirement?
@THEGREENBEAR1723 Thank you!
I replaced my original battery to Optima AGM, Neither Autel or OBD11 is asking to input battery type (AGM) or Ah. I just inputed BEM/manufacturer/serial number, is that all that is needed to input? Does the car know the Ah and AGM change?
I think that “ecm” in the trunk was a sportdiff control module.
energy control module from other videos
can any OBDII scanner be used to do the recoding or are only specific ones able to do this?
Miss the days of just dropping in a new battery and connecting the positive and the negative and be done with it🤕
I never knew changing an Audi battery was this complicated. Is the power management system in an Audi A4 1.8T integrated into the battery or is it a separate module that has to also be replaced when changing the battery?
Codeing a battery insane !
We are getting to a point that you will have to reprogram your weight to the car in order to run properly. And I eat a double meat cheeseburger, you will need to reprogram that as well. Do not add the bacon to the burger, or else the car won’t start, and will tell you. “U need to go walking (Audi voice)”
In the Audi warranty & maintenance booklet it references filling the battery at a certain mileage. Is that a hold over from Europe or are these batteries servicable?
Thank you for explaining about battery degradation.
Hi, I have to remove the battery for an upcoming indoor car show so I will be reconnecting the existing battery. If that's the case do I need to update the info if it's still reading the info from the previous coding which would be the same battery I'd be reconnecting?
Do you lose your tune doing that ?
wow i learned something new about my car today
Great video, question on an older Audi like for example on a 1998 a4 model is it also necessary to program the battery to the vehicle or is this for newer models?
I bought a dashcam and an external battery for my 2019 Golf R. When direct connecting to the fuse panel I would assume I need to disconnect the cars battery first when dealing with the fuse panel? Will I need to recode the car if I disconnect the battery?
B7 Audi A4 Avant Quattro here, I just had my battery and stuff tested and they said i need a new voltage regulator and to replace the entire alternator. Can I get a way with just replacing the VR?
So it you are running a trickle charger for a summer only vehicle, is there anything to do differently?
can i put the new battery in and drive it to the dealer to have it coded or will it screw up my car in that short drive say 15 kilometers
I changed the battery on my 2016 VW Tiguan SEL. Do I need to reprogram?
B8 s4 owner here, could changing the battery without reprograming make an engine light come on?
Hi I have an rs4 b7 and planning to change the battery. Should I still code the new battery or it is only for new cars? Thanks.
do you suggest connecting a spare battery for the duration of the swap so that computer is still powered memory memory is not cleared? I also saw a case where the radio was asking for a code after battery was swapped. why does that happen?
Good question - what did you do?
What happens if u jump it from the back
Can you do a video on how to replace battery in Atlas ?
Thanx! Bless from Puerto Rico
So much easier on a 94 celica! But seriously
Thanks for the information
Is this procedure same for 2014 TDI Passat? Nice video
im just not sure i can buy into it ... so you are saying the car can "sense" an old degraded battery and increase the power output for a dying battery .. but then again cant " sense" the output of a new battery and will overcharge it ? .. it it just me ?
FWIW I tried to follow this and it would not take the serial, even with the spaces and also trying to use the random # thing for the serial numbers after the mfr code. I ended up having to use may clunky hand scan tool to perform the function.
Also after the U hit space, this goes for any letter or digit at the end. I couldn't get it to accept my new numbers then I hit space and it accepted.
Can I drive it 20 miles before reprogramming it?
It’s slightly different on a A6 2014. I got the tool from the description. Any tips for that?
I have a 2007 mk5 vw gti and I keep getting a to lean on bank 1 at idle code I was wondering if u can help me with this thank you
Can low battery cause a low circuit pedal throttle position sensor code to appear with a epcnlight.
Can i ask a question about coding: can i buy a used Audi part .E.G cruise control and then code it to my car. Audi A3 8v 2016, thanks
Hi. If you please I have a question. The obd11 says no default and the golf 6 crank but no start. Is it normal with this scan tool? Thank you.
How do you perform a physical boost leak test on a Mk7 GTI? I did mine incorrectly and some oil shot out my timing chain cover because I didn't leave my oil filler off. Please make a video on this .
Do all Audis require to have a new battery programmed ? I have a Audi A6 c7 2.0 2013
What to do if the battery has no Bem code. It say on the last part of the video. So basically just copy those number and change a couple? I tried so many scanner but none of them work. I will try this obd2 that you using. You only need to pay for that device then nothing more?
Also I just want to Add. I have 2013 audi A4. The first 3 years I swapped the battery without registering it. I used autozone battery agm. They most expensive one they have $250. Believe it or not 6 years still running. After 6 years still tested good but I replaced it anyways. I just found that battery only last 3-5 years so I replaced mine eventhough still running good just to have peace of mind. Now I just need to figure out how to register autozone battery. It lasted 6 years the last time without register so I guess I’m good hopefully
Step one: completely unbolt and disassemble the rear subframe
Step two: replace the battery
Can you go over the mk7 process?
I got a audi a1 sportback i want to change batt bcas start stop stopped working do i have to code new battery in it has a agm battery in but no start stop working
Its necesary recode for audi q5 2011?
even replacing a old battery by the exact same new battery with the exact same BEM does required a recode?
Wonder if I could get your professional opinion. The battery in my A7 died suddenly, no slow decay, just one day wouldn't turn on and was sitting at basically 0V. After some research and decidedly not wanting to spend $400 on a battery recode, I decided to hook the car up to a charger and then hot swapped the battery while the system was running from the charger. I did this in case Audi would notice and acknowledge the disconnecting of the old battery and potentially stop me from driving with an non-official replacement; just being overly cautious. I do however have an OBD11 but did not know I could recode it myself, do you recommend this now a few thousand miles after the initial replacement?
Very interesting , went to Audi and was quoted 400 euros to supply and fit and code a new battery , when asked what the guarantee was they said 2 years ! How many correctly coded batteries don't last that long ?
Hi do I have to program a new battery on the B7 RS4 2006
My question is not to replace but maintain when not using the vehicle, how many amps should a trickle charger to charge it have? Or is there a nice brand you’d recommend.
I did what you said and followed the instructions on everything. The only thing is my GTi change to an Audi S4 when I was done and now the car laughs at me when I try to start it up. Says something like "try again B!". WTH 😳
I have a4 b8 2.0 tdi without Start&stop
Need battery coding ?
I just changed my battery and the new part number is only 10 digits instead of 11 like the original battery and it says wrong value when I try to code it..any help?
Heya Dap, isn’t there another easier way, via Gateway > adaptation > battery adaptation ? Instead of the long adaptation?
Please bring back the S4 videos
I have a OBDeleven…no pro. It lets me input the battery info but not rewrite the new battery info. Do I have to upgrade to a pro or is there a way to make the system accept the new input?
What BEM code should be written to an Exide EK 1050 battery
Can you make a video on how to resolve electronic steering issues on the B8.5?
If there’s no ECM like shown, do you still have to recode ?