How to change handbrake shoes on MERCEDES-BENZ M W163 TUTORIAL | AUTODOC
HTML-код
- Опубликовано: 9 сен 2024
- How to change Handbrake Shoes / Parking Brake Pads / Handbrake Pads / parking brake shoes on MERCEDES-BENZ M W163 TUTORIAL | AUTODOC
Top brands that produce Handbrake Shoes: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
On our website you will find a wide range of auto parts you are interested in: goo.gl/9STwD8
Handbrake Shoes: goo.gl/PFSUFh
Handbrake Shoes for MERCEDES-BENZ: goo.gl/M8IYDc
Handbrake Shoes for MERCEDES-BENZ M W163: goo.gl/fwPXEL
MERCEDES-BENZ Car parts: goo.gl/IFPdeC
Mobile Shop: m.autodoc.co.uk
► How to replace Air Filter on MERCEDES-BENZ M W163 - • How to change Air Filt...
► How to replace front wiper blades on MERCEDES-BENZ M W163 - • How to change front wi...
► How to replace front shock absorbers on MERCEDES-BENZ M W163 - • How to change front sh...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RUclips: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.c...
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...
![How to change front ball joint on MERCEDES ML W163 [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/H-whx8SefT4/mqdefault.jpg)
![How to change front brake discs on MERCEDES ML W163 [TUTORIAL AUTODOC]](/img/1.gif)
These where your best videos! This is an awesome mechanic! No talking but very informative and to the point!
Thank you for your feedback!
We are glad to know this tutorial was useful to you.
Stay tuned with us!
Best regards,
Autodoc team!
Great sequence of Removing and Replacing. This will assist me in my next rear brakes replacement. Just did the front ones.
Excellent work! Keep it up!
Very good and useful video instruction!!!!
Many thanks from Doc!
No han ajustado las zapatas a través del mecanismo de rosca.
Soy cliente habitual, y muy contento, seguir vendiendo y yo ya lo coloco como debe ser.
El video no está mal del todo.
Mui bien descrito, felicidades por los videos. Gracias.
Gracias por la valoración.
I have had a lot of help from Autodoc with my 2001 W163-ML320 repairs. I see comments that seem inappropriate for this type of video. Think. How many Mercedes repairs are carried out by Certified Mercedes Techs vs just regular humans? These videos are better because they don't talk. Torque smorgue. If you do any wrenching you get pretty good at knowing the torque required for many repairs. Unless you really know how to use a torque wrench you may be better off just using good sense. Do you clean all bolts to a clean factory state before torquing? Replacing bolts that are basically perfect is a waste. Why build to a higher standard if all fasteners removed are tossed? Mercedes builds quality and uses the best available materials for a reason. My old Mercedes is lucky it has me as the mechanic, otherwise it would be pushing up daisies in a salvage yard. I'm not going to invest $400 to have my wheel bearing replaced. I spent $400 on tools to do the job correctly... like a Merc Tech. If you know so much why are you watching this video? Mercedes are not magical vehicles. I've seen some pretty crappy performance on many parts on many models over the decades. Lighten up. Take a breath....
Thank you for your feedback! We make our videos first and foremost to receive comments as positive as yours. We look forward to seeing you as our returning viewer and customer in the days ahead. Best regards, Autodoc!
Very helpful video, thank you! Better wear eye protection while working.
Thank you for the feedback! You are absolutely right, it's better wear eye protection while working. This video is considered to be an informative one, and it shows the sequence of repairs, without going into all the technical nuances. We hope that our tutorial was helpful for you. Best regards, Autodoc.
Don't forget to put some egg on your face also. Lol
It's about learning, not criticising Mr Eggcanada
Can you tell me how you found out the parking brake needed to be replaced? I have the same vehicle and it sounds like I have a flat tire while driving but none of my tires are flat, could it be the parking brake is broken? Sounds like its coming from the wheels. It just started this after I can through a water puddle yesterday. I'm confused.
It's probably the wheel bearing in the hub.. you could buy a press station at harbor freight and a wheel bearing, then press it into the old hub. It could also be your cv shaft, you can remove that easily if you're removing the wheel hub, both parts cv axle less that 100.. the press is a good investment like 120.. or u could have someone press it in the hub if u take the hub to them.. you could also buy a new hub with bearing preinstalled and pay 140 for it or less.
What was the problem did you find out ? Sounds like a flat tire? do you mean it felt it was banging as the wheel turned ?
get Steelman Chassis Ear to find the exact location of the noise while driving.
That was good but unfortunately you didn’t adjust the shoes after installatin
Thank you for the valuable clarification, we will take this into account in the following videos.
Best Regards,
Autodoc team.
How do you know the adjustment is right?
Thank you for your feedback! Free landing of the brake drum should be obvious, it should be adjusted according to the circumference, so that the brake drums could be installed properly. Best regards, Autodoc.
Basically it shouldn't be touching the rotor.. give it some free space.. it doesn't have to be perfect and leave room for vibrations so they don't hit the brake rotor when driving.. and not too much force should be needed to engage the parking brake or the cable could snap, specialy if u have an older vehicle with corrosion. The little gear teathed wheel is what u rotate to adjust level.. Idk what direction but you'll see when u do if with a flat head driver.
Would it be possible to tell me if the parking brake needs to be engaged before attempting the replacement. I tried to replacement but cannot get the parking brake toggle that the parking shoes stretch and attach to. It is the metal piece that sits in between the long spring.
Thank you for the feedback! We strongly recommend you to visit a specialized car service center. Best regards, Autodoc.
I removed the parking brake lever toggle and don't know how to put it back. It has a hook inside it. Can you show me how to put it back, please? Thank you.
Thank you for your feedback! Anyway you will have to disassemble rear brakes. Otherwise the installation cannot be carried out. Best Regards, Autodoc.
Take just one minute to clean a bit the parts with dust.
Thanks for the clarification, we will take that into account in the next videos.
AUTODOC
Do you sell parts to the USA? Thanks.
Please find all information about the delivery by the link on our website:
www.autodoc.co.uk/services/shipping
AUTODOC
Is it the same on mercedes w164??
Thank you for your feedback! The difference in caliper mounting design is possible, but the replacement will be identical. Best wishes, Autodoc.
We can open the hub
do the shoes auto adjust ?
Hello. In this Mercedes model an automatic adjustment of brake pads is not installed. Best regards, Autodoc.
how you adjust it!! not completed work
After replacing the brake pads of the hand-brake it's necessary to adjust its work. Best regards, Autodoc.
We can open the hub
he did not replace caliper bolts with new ones and follow service manual torque procedure!!!!
The caliper bolts must be replaced when they are damaged. In this case their replacement is not necessary. Best regards, Autodoc.
what Mercedes Shop manual did you read that from? Nor did you address the issue of proper torque and extra 45degree turn as per the manual!
Thank you for the feedback! Your opinion and remarks are very important for us. We will take them into consideration for our next tutorial. This video is considered to be an informative one, and it shows the sequence of repairs,so some stages of the repairs might have been excluded.Best regards, Autodoc.
That only matters if they are torx heads or obviously warn out heads. U don't need a specific torque, just stay don't give it anything over 100 and use thread locker
🤷🏾♂️😒 really? SMH shut uuuup.