Making a ring from and antique souvenir spoon
HTML-код
- Опубликовано: 26 сен 2024
- Making a ring from an antique sterling silver souvenir spoon for my buddy Rob from RL Coin Rings. If you have flatware you would like turned into jewelry reach out to me at contact@MidnightJo.com
Shop spoon rings: midnightjo.com...
Flatwearable bender: giftz.cc/vbj3I...
The best instructional video I’ve seen on spoon rings, thanks Midnight Jo 😊
Thanks JT!
Fantastic walk through! Love how you explained everything. You've got a super cool shop!
Thank you for watching! The shop took a long time to get where it's at but was awesome to build up!
Great video MidnightJo👍 I absolutelyLove the ring. I knew I could trust you to turn it into wearable art. Thank You 🙏
No thank you for sending it to me, so happy you love it, it's a beautiful spoon!
Midnight Jo it truly is. I can’t wait to see what you make from the ends👍 I’ll be looking for another to send you👌
to anneal correctly is to cool the piece as slowly as possible. To rapidly cool it you've harden it.
That depends on what metal you are working with. Sterling Silver isen't one of them, but there are silver alloys that can be.
But in essence. If you want to properly aneal things, or Normalize it as we blacksmiths call it. you heat it up untill its slightly glows, then set it down on a gypsum or specialized ceramic block for jewlery (Dont remember their name), and just let it cool down to room temperature on it s own. It takes a bit of time, but given the thickness of the spoon, it shuldent be mutch more than a minute or so.
OMG!!!
Beautiful work,, I love that ring..👍👍👍👍👍❤️❤️❤️❤️🙏🙏🙏🙏
Thank you 🥰🥰🥰
Your work is amazing, you inspire all coin and spoon ring makers ;-)
Aww thank you, same to you, you do wonderful work!
Thanks for rhe handy video! I just want to say though, when you quench the metal you arent softening it. Quenching hardens the metal. You have to cool it slowly for it to soften. Youll find the metal much easier to work with if you cool is slowly after heating
Thank you, this is a fairly old video 😂 I've learned a lot more through the years ❤️
@midnightjo1327 woops sorry! I didn't check when it was posted.
@@Chuckieraven no problem, thank you for watching!
It depends on the metal. She said it was sterling silver and it dosent harden trough quenching. But there are silver alloys that do.
Hey Jo... IM 57 and worked too hard at construction all my life...yesterday I found some old silver-plated rings at second hand store. I was hoping to have an antiques roadshow moment but no luck. I have been really getting into lapidary lately and have spent hundreds of Covid social distancing hours finding agate, jasper and anything that has something special. I bought a rock tumbler ...dremmel....tile saw all thinking it would be fun shaping them and maybe making jewelry of some sort ( I am thinking if I can't work anymore it would be a great hobby).I came across a site for making spoon rings and went down the rabbit hole called google and started thinking to make Christmas presents this year. after watching several tutorials into the wee hours last night I fell asleep, didn't shut down my computer so....when I woke up this morning your video was in the Queue ready to play. I don't know when and where epiphany defines our fates and inspiration explodes us into answers we never dreamed to ask.ourselves.but I do know having reason and purpose in life will provide the warmth of happiness and fulfillment that defines us.
I felt inspiration so strong after this video that luck has laid out my destiny...( next comment down will explain my excitement)
Thanks, grazie da Italia
God bless your hand sister
And bless you too ❤️🌹
Am feom Egypt 🙏
....I hope to still have thirty good years in me (fingers crossed) to fill ,but since my injury depression has set in and an empty feeling has manifested itself in the pit of my stomach. as i am writing this warmth is washing over me unveiling inspiration and know ing it is all good.
I donèt know if you have any advice you can share on#1: are there any courses I can take to become a jeweler... #2 what rudimentary equipment should I buy to learn on and #3....THANK YOU JO!!!!. I never thought a random 3 miute video that magically appeared on my screen would change my life. Thanks to your inspiration I just had a vision of myself wearing Loupe glasses huched over a wooden bench next to the fire in my wood cabin, and making the Finest peice I have ever made in the thirty years since I saw this video. If I could call on you for advice during this endevour it would be so appreciated...I'll keep in touch ...Im laughing right know at all the things i've learned and having them come together so perfectly. You may have changed my life because feeling like I do right now is wonderful. thank YOU.
Hi Tim, thanks for watching, I'm happy I could inspire! I actually haven't taken a jewelry course since high school haha, but I've always been handy and my husband has helped a good amount with how to do things. This is the age of information, I would refer you right here to RUclips, there's great info all around us. If you're looking at getting into flatware jewelry and have some money to invest I recommend a 1 ton arbor press and tooling from Flatwearable - they have their own RUclips channel explaining how to use their products. If you're not looking to invest heavily and just get your toes wet there's a $40ish dollar bender on Etsy.com. Happy making!
I want to come and play with your toys :0 Nice tutorial!!!!
Thank you 🥰
Beautiful!
Can you tell us about the polishing compound you use? I haven’t seen it in “chapstick” form before!
I use the blue polishing compound from harbor freight
where did you get the sander device? you got a lot of cool tools right there
The sanding station is Ryobi, from Home Depot. The bench lathe is Foredom, you can find them online. I might be a tool addict 😂 it took a long time to build up the tools I have!
thanks for taking the time keep up the good work you got a new follower ❤❤
beautiful
Thank you 😁🥰❤️
Looks great!!
Thanks Wade!
Can I send u silverware to make rings and bracelets?
Y HEAT? Im new at this and all the videos I've watch they just started bending it. no heat. what the dif? how much do you charge per ring
I anneal when working with sterling to help prevent breakage. I don't anneal silverplate or stainless. I charge $25/ring when using your flatware. My retail prices range from $25 up
I don’t see a link for the tools to make it round. Where do you purchase that?
I use 1 ton arbor press attachments from Flatwearable, which I highly recommend!
Great video Midnight Jo. Very easy to follow. What brand of polish are you using on the spoon ring?
This is the blue polish from Harbor Freight. I also like the Luxi blue for a final polish with an untreated muslin buff. These days I finish all my sterling with HF & treated buff the the luxi and an untreated buff
And all it took was a ton of equipment, which of course everyone has!
You can get started with much simpler tools, this is just a video showing my process ❤
Where can one get this jewelry, I had a spoon ring yrs ago n loved it, I would like to purchase another one, please leave details on people can purchase on,
You can find loads of spoon rings on my website MidnightJo.com!
What’s in the pickling pot?
hi mid night jo where didvyou buy your arbour press
this is so cool!
Just wondering, If you wanted to keep the enamel as part of the ring design, how would you prevent it from breaking?
You'd have to keep it flat which would be very difficult the way that I make rings, might also be uncomfortable as a ring
What kind of bender you used?
It's from flatwearable, amazing tool!
Bonjour et merci pour votre vidéo👍pouvez vous me dire ce qu’es un pot a cornichon 🤣 dans la traduction en Français il écrivent un pot a cornichon ☺️🤣 merci …. je trouve votre travail MAGNIFIQUE 🙌
I use Sparex no 2 for pickling. It removes the discoloration caused from heating the silver
@@midnightjo1327 merci 🌸
What is the picking solution you use ?
I use Sparex #2
Beautiful...berapa harganya.?
It's good that you wear PPE, but I hope you'll research polishing on a wheel while wearing those heavy gloves. It's quite dangerous, TBH.
Thanks for the heads up!
My name is Linda ortiz
How wonderful and really beautiful you are. I want you to activate the Arabic language for translation. Thank you
Can you melt a gold necklace for me into a small phenoix pendant
Video was not helpful couldn't really see how you were using that bending tool and wasn't explained where you acquired the bending apparatus that you had to use I have that press but where did you get the rest of the stuff and the video should have been more focused on that The ring did come out nice
Sorry you didn't find the video helpful! At 3:22 I tell you that I'm using a 1 ton Harbor Freight arbor press with Flatwearable attachments.
This video has a better look at how the bender is used ruclips.net/user/shorts_b3jAOpVojM?si=sIF2zGitmdjJIt-8
i think your viedo was great
@barbaralavalle7291 thank you 😁❤️🥰