What's better a Teac W-1200 Cassette Dec or METAXAS & SINS Reel to Reel?

Поделиться
HTML-код
  • Опубликовано: 20 окт 2024

Комментарии • 16

  • @stevenuttley
    @stevenuttley 2 года назад +1

    Very interesting. It's nice to have some objective info on this subject from someone who clearly knows their subject.

  • @marez_3936
    @marez_3936 3 года назад +1

    By what cable (RCA or usb) is better to digitize with Teac w200 for a PC?

    • @GaryKeepItSimple
      @GaryKeepItSimple  3 года назад +1

      It would depend on the sound card on the PC. If you have a really good ( professional) Card then rca may be better, but unless you have that sort of card the USB is the preferred method as the deck will do a good job of digitalising the output. All my stuff is USB and I cannot fault it. The USB is not computer/card dependent. It is always the same.

    • @marez_3936
      @marez_3936 3 года назад +1

      @@GaryKeepItSimple Audio: I have the following data on my sound card: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Gigabyte
      driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:1e20
      Device-2: NVIDIA GF108 High Definition Audio vendor: ASUSTeK driver: snd_hda_intel
      v: kernel bus ID: 01:00.1 chip ID: 10de:0bea
      Rather poor sound card. Built into the motherboard.
      But I also have the Myryad Z20 external DAC....But I don't know if this Myryad Z20 will improve anything ..

    • @marez_3936
      @marez_3936 3 года назад +1

      @@GaryKeepItSimple Thanks for the hint

  • @bobsbits5357
    @bobsbits5357 3 года назад +1

    hi any tape cassette that runs at 1 7/8 is very poor i hear the tascam 3 3/4 ips decks are very good you can't good fast i have a pimped up cassette deck runs at 7 1/2
    yes 7 1/2 the servo motor died so i put in a old motor and drive belt in a tascam 238 at last it would run right

    • @GaryKeepItSimple
      @GaryKeepItSimple  3 года назад

      That is an interesting project. The motors from the Dubbing decks are made to run at double speed so they may be a good source of spares for you.

  • @killmore75
    @killmore75 3 года назад +3

    What the hell is this? Be real!

    • @GaryKeepItSimple
      @GaryKeepItSimple  3 года назад

      What is it you are referring to?

    • @killmore75
      @killmore75 3 года назад +1

      @@GaryKeepItSimple Real people real voice : (

    • @GaryKeepItSimple
      @GaryKeepItSimple  3 года назад

      OK, the Voice over software is a bit, How to put it? Awkward,. However, it was quicker than doing the voice-over myself with the numbers and things. It is not as easy as it may seem to do a Technical voice over. It is easy to trip and fall over the numbers. The intonation is difficult. It is also tough to sound as upbeat as the auto voice.
      I do know I can and do, do it better when it is something that matters. That is why I used it only at the beginning. This RUclips thing is a multiskilled thing, with the ability to suck whole days from the week, and you end up with just a few minutes that count. I thought getting it out fast was worth it. The Anadialog Videos had just been released, and he was misrepresenting the numbers. How can a Cassette deck with 0.25% Wow and Flutter be called mediocre, yet a reel to reel with the same figure is called excellent. I shall endeavour to not use the auto voice in future. I thank you for your feedback. Cheers.

    • @killmore75
      @killmore75 3 года назад +1

      @@GaryKeepItSimple Nice comment! Will take out the dislike! : )

    • @GaryKeepItSimple
      @GaryKeepItSimple  3 года назад

      Thank You.