Outstanding patience and craftsmanship. Well done. Your choice to work fiberglass into some of the components ups the level of design over all the other foam r/c aircraft. Again, incredible work. Cheers!😁
Nice job! That is really a great-looking and flying airplane. It would be great if you made them custom for people as a business. One thing I would have done a bit differently is use metal gear servos. They aren't much more expensive but they fail much less than plastic. It's such a nice model it deserves the best!
@@rcmaking3412 do you think i could use Dollarama foam instead of 5mm depron foam? but I think it would be better to use 5mm depron foam. because Dallarama foam has paper on it.
831 why are these servos located so far aft-of the cg.! 1201 the making of two notches AND a hole has Undermined the structural integrity of those ribs.! 1509 wrong. the structure of a main spar should be Oriented such that Vertical forces that the wing experiences will be 'resisted'. this method of wing attachment results in a less-than contiguous main spar.! 1601 this component should be made with NINETY degree bends.!!! d
246 this fuselage is OVER-engineered. depending on the covering/skin used, Less internal structure May be Needed. in most cases, the use of glue fillets (at the long joins) adds a LOT of strength. 417 join join join. glue glue glue. equals more and More Unnecessary mass located aft-of the cg.! googletranslate
isn't this NumaVig's???? i never knew we could make his designs with hot glue xD also, 1200gms????? that is too much weight for a 3d flyer.... i would rather put my 1500mah on it.... also also, where did you get the foamboard from? (Amazon is not having stock anymore)
"Flying weight: 1200 gram with battery" WAY TOO HEAVY for 1030mm wingspan depron model, it should not have exceeded 600grams. That motor mount is a disaster waiting to happen. Hopefully it wont come apart mid-air. The plywood panels have excess/unneded material left on them. You have a fretsaw, use it to make smooth rounded cutouts on panels. Take everything written as constructive criticism, you can do better.
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
That's very nice model.
I'm also planning to build one
Nice one
Nice build man..thanks for sharing
Beautiful bro
Mashallah 🎉❤❤
Once again another of your amazingly Awsum builds !!! Great job Man !!! 😉😎
skillful hands, beautiful work, excellent plane 👍
It's amazing aeros. ❤
Your skill is amazing. Salute to ya.
Thanks bro
Beautiful build my man! Amazing skills.
this is one of the best RC plane building video i have ever seen.
@@davidmuthukaden287 thanks
Very well done ..
Nice job bro .
Nicely done. Saving the plans for a rainy day
c'est du sacré beau boulot, bravo !
wow nice bulid and model
Nice comment
Outstanding patience and craftsmanship. Well done. Your choice to work fiberglass into some of the components ups the level of design over all the other foam r/c aircraft. Again, incredible work. Cheers!😁
very cool and detailed build! But it seems quite complex. Congratulations
Nice excellent work congratulations, build a biplane De Havilland Tiger Moth.
Very nice job
Very nice work.
Nice Mr jlal Khan
that motor mounting style is the funniest one that i have ever seen xD xD
Why? B.c. the engine shaft goes through the mountingplate?
@@friendlyreptile9931 don't know myself either.... It just cracks me up😂
30:25 this is genius
Nice job! That is really a great-looking and flying airplane. It would be great if you made them custom for people as a business. One thing I would have done a bit differently is use metal gear servos. They aren't much more expensive but they fail much less than plastic. It's such a nice model it deserves the best!
Turning your hobby into a business while it sounds good just don't
@@andrewerickson6690 Oh I dunno... I know several people who turned their hobbies into very profitable businesses.
Impresive building technique also following channel from a long time. Day by day build quality and finishing improved.
Kindly can you tell about fiberglass cloth used grams per square meter and glue used other than epoxy and wood glue. We shall be thankful
@@hassanzakori59 i use 100g/m² fiberglass and glue i will be used the akfix wood glue
Wow,wow,wow this is the best build video of a rc plane on RUclips ...thanks for sharing bro
Welcome
@@rcmaking3412 👍
flitetest are the best and fastest builds.
Hello friend, when dividing the frames F1 F2 etc, did you subtract the thickness of the central material where you glue the F1a, F1b etc? Thank you
이비행기는 무조건 4사이클 엔진 달아야 좀 편하게 날릴수 있음 .. 2사이클 달면 실속 무자게 걸림
You r true
WOW :)
Show meu amigo, Parabéns pelo trabalho, muito caprichoso...
thanks my friend
Nice comment
Hii bro
Can i use 1050 props in 2822 motor with 1450kv
How did you set this to this a4?
Should ailerons go right upto the end of the wingtip?
22:26 What is that piece of paper called?
Brown paper or butter paper
Hello, nice job. Can you share the plan on A4 paper? The plan I downloaded is not A4.
Assalam o Alaikum, nice work...where you get the fibreglass cloth and resin/epoxy from.
Search in lahore or aliexpress online website
how many foam boards did you use?😶
@@SlipAvation 1 and half
Sir, where did you buy the foam and plywood from?
I want super mushak video please
Ok, i will make
what foam are you using?
@@jasongroening 5 mm depron
@@rcmaking3412 thanks👍
@@rcmaking3412 do you think i could use Dollarama foam instead of 5mm depron foam? but I think it would be better to use 5mm depron foam. because Dallarama foam has paper on it.
Which ratio i have to mix raisin and hardner . glas fiber of which value we have to use
Normally use 2:1
@@rcmaking3412 What glass fiber we have to use for the cowl
@@SatishKumar-iu1yx 100 gram
What is the appropriate paper size to print the plan
Its prints on A4 paper
I want to buy one, what would be price?
831 why are these servos located so far aft-of the cg.!
1201 the making of two notches AND a hole has Undermined the structural integrity of those ribs.!
1509 wrong. the structure of a main spar should be Oriented such that Vertical forces that the wing experiences will be 'resisted'. this method of wing attachment results in a less-than contiguous main spar.!
1601 this component should be made with NINETY degree bends.!!! d
What material did you used to make cowling and landing gear and where can i buy it from in Pakistan?
for the cowl i used fiberglass cloth and wheel make from hard foam
@@rcmaking3412 where can i get fiberglass cloth from?
246 this fuselage is OVER-engineered. depending on the covering/skin used, Less internal structure May be Needed. in most cases, the use of glue fillets (at the long joins) adds a LOT of strength.
417 join join join. glue glue glue. equals more and More Unnecessary mass located aft-of the cg.!
googletranslate
When will you complete the Boeing 747 ? It’s been more then a year
Nice comment
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉😮😮😮😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😢😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😊😊😊😊😊😊❤❤❤
🫡
isn't this NumaVig's???? i never knew we could make his designs with hot glue xD
also, 1200gms????? that is too much weight for a 3d flyer.... i would rather put my 1500mah on it....
also also, where did you get the foamboard from? (Amazon is not having stock anymore)
I purchase foamboard in my local market in pakistan you can purchase from Ali express
@@rcmaking3412 ooohh
Ali Express is banned in India😂
"Flying weight: 1200 gram with battery" WAY TOO HEAVY for 1030mm wingspan depron model, it should not have exceeded 600grams.
That motor mount is a disaster waiting to happen. Hopefully it wont come apart mid-air.
The plywood panels have excess/unneded material left on them. You have a fretsaw, use it to make smooth rounded cutouts on panels.
Take everything written as constructive criticism, you can do better.