Hello, I spent all day today researching the internet for information on how to fix an issue I encountered when I received a new modem-unable to view my surveillance cameras remotely. There is a lot of information, but your video finally helped me connect the dots and realize I needed to configure my new modem and add port forwarding settings for my cameras. Thank you so very much, this is a fantastic video!!
Great explanation and so easy to follow! Thank you so much - I've spent weeks googling trying to find out a way to access my camera remotely and try to make sense of all the tech speak! Your video made it so simple.
the port forwarding is really a simple task but the wAY you EXPLAINTED to everyone its really appreciable and hats off to you and yes you gain 1 new subscriber
My cam stopped working after the router reset. I was losing my hair figuring out what I forgot to change in settings. As soon as you said port forwarding, it clicked. Thank you. And great video
Best explanation of port forwarding I've come across. Many thanks - I now understand what I have to do to connect remotely to my home CCTV DVR. Thanks from England
Great video, question, don't you need to use dynamic dns to view camera from outside the home ?? I thought you have to use dynamic dns to see camera from outside your home network.
Hi. Is any way you can help to set up port forwarding for TALK TALK wifi hub. There many options to chose, and so far i did not figure out what to choose.
Sorry. No idea what device is that. Unfortunately I can go 101 to fix issues. Record free videos takes a lot of my personal time (channel does run any ads).
Thank you very much!! just have one question if i have about 6 o 8 cameras hat about port numbers? should i give a differente port number for each camera or put the same and just change the ip adress?
Thanks for sharing the videos .This tutorial is so detailed and easy to follow. And i've couple of Question . I did install hikvision IP cameras in some remote area and now i need to access it remotely to monitor from other location and setup and configured hikconnect unfortunately i encountered very low signal in the area to have a live feed from other location and i need proffessional help to fix the issue . what are my options ? Thanks.
Gracias por este video y la tecnica de presentacion. Ayuda enormemente a los que necesitan aprender los pasos requeridos para conectar a una camara remota. Excelente Video!!! 😀
Excellent Video! What if there are two routers in series on the DVR side of the internet? It goes from the main router, to an upstairs router/switch, and then to the DVR..
Is this only good for IP Cameras? Is it different if I have Analog Camera? Currently using an Amcrest DVR, I have downloaded the app to my phone. I am able to access the cameras through the app when I am connected to my home network. But once I leave my local network, I cannot and roam or use a work network, I cannot connect.
I'm able to access my cap using public ip and port but its not playing the video may be going to another port that i have to forward too. Do you know how can i know where its stuck now. Which port is it hitting that i need to allow??
What ports are needed?what are media,web,Mobil,udp and rtsp ports and their use?What is work around for active x (Internet explorer) discontinued?I.e. chrome or safari or opera?Plus video loss?
I have shop cameras attached to router to tmobile modem. I wish to access the dvr from home. Don't know how to assign an ip address to the shop system. Any help would be appreciated.
Hi, I'm using Meye app to view my 8 channels cctv cam. I got 1 ipcam from Foscam using IPcam Viewer Pro app to view. I was wondering how do I make this 8 channels cctv camera to be able to view on IPcam Viewer Pro app as well. I've tried many way putting the address also doesn't work. Could you help me, highly appreciated! Thank you Sir
Is this possible that my ip camera on remote network(my warehouse far from home but connected to internet) and my dvr is on local network (home) and record on it.
Thank you for your informative videos. I just set up a Verizon 5G Home Internet Gateway and trying to do the Port Forwarding for my LTS Security Camera System and IP Cameras. I accessed the Verizon 5G Gateway and went into Advance Settings where Port Forwarding was listed. I added my LTS DVR iPv4 address and added Port 80, Port 8000, and Port 8554. Unfortunately it didn't work. Any suggestions? Also I was thinking of adding a router to the Gateway thinking I could plug the LTS Security Camera System into the router and then set up the Port Forwarding on the router rather than the gateway. Interested in your thoughts on this also. Thanks, Ken
Great explanation. I have a couple of ip cameras and the problem I have is....how to find out what ports I can use, I have no idea. I notice you used ports 8080 and 34567. I don't know.
Hi Claudemir , Thank you for the great video. I have followed your steps and have it set up but when I remotely try to view by phone / pc/ laptop ; after getting to the page where I have to sing in with my user and password a message pops up saying “ Please install plug-in first” When I click on install and go back it still says the same thing . I have tried with 3 different browsers. I have checked the ports and they are open. Would you be able to advice on a solution. Thank you.
This is great. Very helpful for understanding what is happening. This explanation is for direct connection to a single camera. But how do you adapt this explanation for multiple cameras going to a central cctv dvr box? Is it basically identical?
You either do the por forwarding per IP camera or recorder. If you have a DVR connected to 16 cameras, you just need to set up the port forwarding once (for the DVR). The same is true if you are using NVRs.
Hello, I seem to have an issue with my PTZ IP camera, I can only view the camera from anywhere in the world on my mobile phone via Guard Viewer ( via P2P ) only if my phone is connected to a WIFi. When I switch to mobile data it does not connect. Do you know how to fix that? I can view the camera via any wifi around the world through the app but not via mobile data!
You probably have an Internet link with dynamic IP, so you dont stop it from changing unless you pay for a service with fix IP. Ask you Internet provider about prices for such option.
@@modousowe1414 Yeah. Sure. You can have Dynamic or Static IP given by your ISP depending on the service you have. You can use Port Forwarding and NAT to have access to the devices in your local area network and DDNS to solve the Dynamic IP issue if you want to. ;)
@@LearnCCTV I have the same configuration. although my IP cameras are connected to a cisco switch. I followed everything you did but it seemed i still cannot broadcast my IP camera. The Router and Switch's DHCP is also enabled. What could be the reason that I cannot access my IP camera?
Definitely the best training explanation I’ve ever seen but I have one question if you don’t have a static IP the modem/router will change occasionally and then you lose all your camera viewing and you have to reconfigure the new IP address that the modem has change to. Do you have a solution to keep up with the IP address when they change for your modem so you do not lose your camera and have to reconfigure every time your Internet provider modem IP changes.
Yes, After finishing the Port forwarding process,, use the DynDNS or No-IP DDNS service to solve the dynamic IP problem (The instructions are available on the respective websites).
i added the DVR to the Port Forwarding. At first the DVR wasnt coming up in the Port Forward list. now its. But when i put the ip address with the port it doesnt connect. i just get the error cant the browser couldnt connect. I have the Zosi H.265 and the modem router (its two in one) "UBC1322 - Ubee"
I'm wanting to see my DVR on my Mac and the DVR is fully working it can be seen on the TV and on tablets such as an Ipad and Mobile Phones. For me to access the DVR it asks for ActiveX to be installed but that if not mistaken cannot be installed on Mac. I know about IETab chrome extension which does work but I don't want to pay and so it expired. I know about installing virtual windows and going through all that don't want to mess around with all that. - - All I want to know is if I can access my DVR on a browser on my Mac without ActiveX. Can I forward the DVR to a website or something into which allows seeing of my DVR and doesn't need the use of ActiveX?
You could send the stream to a cloud service, but that will slow down your access a little bit and spending on the service you have to pay. Take a look at this video where I show how to see an IP camera on the cloud (It's the same process for DVRs). ruclips.net/video/3aZW4UBGqWk/видео.html
Thank you so much. That was step by step for dummies like me. I am in the process of setting up system at dads house to watch over him and keep him safe. I will know in a few weeks if i did it correct. I do have 1 question though. Do i have to port each camera or can i just access the NVR to navigate all cameras and settings?
Awesome video!! I have two questions: 1. The port number 34567, did you just create it at random or it's a standard port number 2. When you moved to the second PC to have access to the camera, is that PC on the same network or different network
1. The port number is for this manufacturer only (not usual). You must forward the ports that are described in the device network’s menu if you want to use such services (example port 80 for http or port 443 for https). 2. Different network via the Internet, otherwise it wouldn’t make any sense.
You must be in the wring menu... It's just port forwarding and you shouldn't inform the external IP because it can change if you are using a dynamic link. Check your router's manual.
Hello buddy, how's it going? Your channel is amazing I'm learning more here than in my college thank you so much. I'm working as a technical support, in a ISP for around 6 months, I want to improve my English as well to support some foreigns clients. Could you please give me some advices that I could use to improve my English in I.T area?
The title says DVR, but the video clearly shows just an IP camera, DVR could have analog cameras on it, so this video is misleading or incorrect. This video is also three years old as of now 2023. my router access is on an app way different . seems this applies to intelbras equipment? perhaps create an updated video and link it in the more place
The method applies for any router. Unfortunately it's no possible for me to have every single router to make a specific video about it. I don't have this one you mentioned. I suggest just watch the video and apply the concept to setup your router.
Greetings, how can I put my IP address static on my tp-link archer mr200 wireless home router. In global operation so that others can see it. It is protected at the same time. With the Java feature enabled
Best tutorial. Sir just wanna ask something. Is it possible to remote the camera using my webpage? I mean if i want to make a menu option in the webpage for example. (Camera) then if i click (camera) on my webpage it will automatically go on the remote viewing of the camera and also can control if i am using ip ptz camera. Is it possible or not? Thank you
everything is possible once you forward your port and have access to your remote location but in the video tutorial, he just mentioned how to forward the port but he didn't mention that you home internet IP address was changed after every 12 - 24 hours so to avoid this problem you need DNS account
Good job with explaining, I bought a new hard wired Swann security system & I would like to live view the motion alerted camera on mobile device/phone..I was told to buy a Linksys multi purpose wireless device(cannot use Ethernet cable)so I can have a wireless bridge from dvr to router using wifi bridge (linksys Multi Purpose device using cat 5 E cable) & to router/internet.. Then this video is gonna show me how to connect the camera system to the mobile device? Always used wifi camera system, but we are having late alerts with wifi systems(sometimes 3 hrs late using wifi) connection interruptions/high-low signals so I went with hard wired system with the 1 wifi bridge to reach signal to router.. Does this sound right to you? Thank You for the video..
Some security systems have the cloud service available and I believe that's the case with Swann. So just use their service and you do NOT need port forwarding. Just in case the service is not offered by the manufactuter, just follow the step on the video to port forward for different services such as Web Browser, Client software or Mobile App. It's just a question of using the correct port and you are done.
@@LearnCCTV thank you This is really unfamiliar territory I'm entering...I bought items piece meal without seeing the bigger picture After a farm robbery I'm incredibly motivated to get the parts all talking to each other....
Hello, I spent all day today researching the internet for information on how to fix an issue I encountered when I received a new modem-unable to view my surveillance cameras remotely. There is a lot of information, but your video finally helped me connect the dots and realize I needed to configure my new modem and add port forwarding settings for my cameras. Thank you so very much, this is a fantastic video!!
The best explanation I ever had. This dude has passion on teaching and He knows exactly what He's talking. Thank you very much. You made my day.
I’m glad you liked
Great explanation and so easy to follow! Thank you so much - I've spent weeks googling trying to find out a way to access my camera remotely and try to make sense of all the tech speak! Your video made it so simple.
Thanks. I'm glad I could help you.
I thinks this is the best explanation of accessing camera over the internet, theory and practical. simple and useful.
Thanks
the port forwarding is really a simple task but the wAY you EXPLAINTED to everyone its really appreciable and hats off to you and yes you gain 1 new subscriber
My cam stopped working after the router reset. I was losing my hair figuring out what I forgot to change in settings. As soon as you said port forwarding, it clicked. Thank you. And great video
I have been searching for this info for three days. Thanks you. Sub.
Awesome teaching, so simple to understand.
best explanation so far
Thank you, you shows everything step by step. ❤
I need small clarification sir about external ip actually external ip is frequently changed thenhow should we used it
Best explanation of port forwarding I've come across. Many thanks - I now understand what I have to do to connect remotely to my home CCTV DVR. Thanks from England
Thanks, I’m glad you liked it.
Great video, question, don't you need to use dynamic dns to view camera from outside the home ?? I thought you have to use dynamic dns to see camera from outside your home network.
Amazing Explanation! You know what you are talking about!
Keep up the good work!
✅ The Ultimate Security Camera Guide V1
learncctv.com/ug1yt
▶️ Video Course - Free Trial - learncctv.com/skill-ytc
Hi. Is any way you can help to set up port forwarding for TALK TALK wifi hub. There many options to chose, and so far i did not figure out what to choose.
Sorry. No idea what device is that. Unfortunately I can go 101 to fix issues. Record free videos takes a lot of my personal time (channel does run any ads).
Thank you very much!! just have one question if i have about 6 o 8 cameras hat about port numbers? should i give a differente port number for each camera or put the same and just change the ip adress?
Thanks for sharing the videos .This tutorial is so detailed and easy to follow. And i've couple of Question .
I did install hikvision IP cameras in some remote area and now i need to access it remotely to monitor from other location and setup and configured hikconnect unfortunately i encountered very low signal in the area to have a live feed from other location and i need proffessional help to fix the issue . what are my options ? Thanks.
Gracias por este video y la tecnica de presentacion. Ayuda enormemente a los que necesitan aprender los pasos requeridos para conectar a una camara remota. Excelente Video!!! 😀
If i am using 2 routers (master and slave), should i set up both router to access my camera from the slave router?
very good teacher , love your vids
Outstanding video. Thank you.
Thanks
Excellent Video! What if there are two routers in series on the DVR side of the internet?
It goes from the main router, to an upstairs router/switch, and then to the DVR..
Not a techy, but this was explained very well
Is this only good for IP Cameras? Is it different if I have Analog Camera? Currently using an Amcrest DVR, I have downloaded the app to my phone. I am able to access the cameras through the app when I am connected to my home network. But once I leave my local network, I cannot and roam or use a work network, I cannot connect.
I'm able to access my cap using public ip and port but its not playing the video may be going to another port that i have to forward too. Do you know how can i know where its stuck now. Which port is it hitting that i need to allow??
Forward the RTSP port (554) and any others that are described in the product's menu.
What ports are needed?what are media,web,Mobil,udp and rtsp ports and their use?What is work around for active x (Internet explorer) discontinued?I.e. chrome or safari or opera?Plus video loss?
I have shop cameras attached to router to tmobile modem. I wish to access the dvr from home. Don't know how to assign an ip address to the shop system. Any help would be appreciated.
Very educational please keep them coming!
Juan Alvarado thanks. I’m glad you liked it.
Hi, I'm using Meye app to view my 8 channels cctv cam. I got 1 ipcam from Foscam using IPcam Viewer Pro app to view. I was wondering how do I make this 8 channels cctv camera to be able to view on IPcam Viewer Pro app as well. I've tried many way putting the address also doesn't work. Could you help me, highly appreciated! Thank you Sir
This tutorial is so detailed and easy to follow. I love it.
I'm glad you liked it.
If I am using a NVR for my 4 cameras, do i just need to do it once for the NVR ip address? and it will see all 4 cameras.
that IP you provided comes from where? it is not local such as 192....how do you get that IP numbers
Is this possible that my ip camera on remote network(my warehouse far from home but connected to internet) and my dvr is on local network (home) and record on it.
Yes.
Thank you for your informative videos. I just set up a Verizon 5G Home Internet Gateway and trying to do the Port Forwarding for my LTS Security Camera System and IP Cameras. I accessed the Verizon 5G Gateway and went into Advance Settings where Port Forwarding was listed. I added my LTS DVR iPv4 address and added Port 80, Port 8000, and Port 8554. Unfortunately it didn't work. Any suggestions?
Also I was thinking of adding a router to the Gateway thinking I could plug the LTS Security Camera System into the router and then set up the Port Forwarding on the router rather than the gateway. Interested in your thoughts on this also.
Thanks,
Ken
Great job at explaining. You made it very simple and clear to follow. Thank you for sharing.
I’m glad you liked.
You are awesome!! Thank you very much for this clear explanation.
Great explanation. I have a couple of ip cameras and the problem I have is....how to find out what ports I can use, I have no idea. I notice you used ports 8080 and 34567. I don't know.
You need to log into the camera and see which ports are already setup on the camera. You then just direct the same port in your router.
Hi Claudemir ,
Thank you for the great video. I have followed your steps and have it set up but when I remotely try to view by phone / pc/ laptop ; after getting to the page where I have to sing in with my user and password a message pops up saying “ Please install plug-in first”
When I click on install and go back it still says the same thing . I have tried with 3 different browsers. I have checked the ports and they are open.
Would you be able to advice on a solution.
Thank you.
Thank you , helped me solve my problem . :)
thanks for your explanation, but what if what you want to access is DVR not a camera as your video pointed out, is it the same principle?
Exactly the same principle.
It doesn't matter if it's an IP camera, DVR or NVR, the concept is the same.
Learn CCTV does each camera get a unique port? How would you access multiple ones remotely?
Thanks. Can you do remote viewing on cell phone with Verizon Actiontec fios router and Q-see DVR. I
Easy to install. Bright as ever.
Brilliant explanation, thank you.
This is great. Very helpful for understanding what is happening.
This explanation is for direct connection to a single camera. But how do you adapt this explanation for multiple cameras going to a central cctv dvr box? Is it basically identical?
You either do the por forwarding per IP camera or recorder. If you have a DVR connected to 16 cameras, you just need to set up the port forwarding once (for the DVR). The same is true if you are using NVRs.
Does this work for the Zosi DVR cctv?
Please can I port forward a Nvr 16 channels using the same method ?
MAY ALLAH ALMIGHTY BLESSED YOU SUPERBBBB VIDEO LOVE FROM PAKISTAN
BESR REGARDS CCTV TECHNICIAN ALI SHAN GHORI
Can you do a video for the sozi dvr only. I have followed your steps but no luck. Example you did was only for an IP Camera but not Dvr.
Great explanation sir.
Thanks and welcome
Can we do port forwarding with the DVR of an analog camera? Do DVR's have an IP address ?
Such an awesome explanation. Thanks a lot.
You are welcome.
@@LearnCCTV 72t7
Excellent explanation loved the diagrams, Made a very complicated concept easy to understand. Thank you!.
You are welcome.
Hello, I seem to have an issue with my PTZ IP camera, I can only view the camera from anywhere in the world on my mobile phone via Guard Viewer ( via P2P ) only if my phone is connected to a WIFi. When I switch to mobile data it does not connect. Do you know how to fix that? I can view the camera via any wifi around the world through the app but not via mobile data!
Great video. Are there any security concerns? Does port forwarding not make the device vulnerable to hackers?
I am your new subscriber, I wish I could find your channel earlier. Thanks for the great videos.
Thank you so much for amazing information about networking ip address.
Vou are welcome.
Thank you for this video. I have a question, How do I stop the router's external IP from changing?
You probably have an Internet link with dynamic IP, so you dont stop it from changing unless you pay for a service with fix IP. Ask you Internet provider about prices for such option.
@@LearnCCTV understood, I thought it was the router randomly changing the external router IP. thank you so much, very helpful.
Your external IP is control by your ISP (Internet service provider) for more information read about NAT routing protocols.
@@modousowe1414 Yeah. Sure. You can have Dynamic or Static IP given by your ISP depending on the service you have. You can use Port Forwarding and NAT to have access to the devices in your local area network and DDNS to solve the Dynamic IP issue if you want to. ;)
My ISP is using cg nat what to do?
It is required to change your computer into static configuration or dhcp will do?
At first you can use DHCP to get the IP from the router, then you change it to static using the same information to guarantee the IP won’t change.
@@LearnCCTV I have the same configuration. although my IP cameras are connected to a cisco switch. I followed everything you did but it seemed i still cannot broadcast my IP camera. The Router and Switch's DHCP is also enabled. What could be the reason that I cannot access my IP camera?
Definitely the best training explanation I’ve ever seen but I have one question if you don’t have a static IP the modem/router will change occasionally and then you lose all your camera viewing and you have to reconfigure the new IP address that the modem has change to. Do you have a solution to keep up with the IP address when they change for your modem so you do not lose your camera and have to reconfigure every time your Internet provider modem IP changes.
Yes, After finishing the Port forwarding process,, use the DynDNS or No-IP DDNS service to solve the dynamic IP problem (The instructions are available on the respective websites).
I gotta question. Every time u say connected to the internet, are u talking about the modem?
Router
i added the DVR to the Port Forwarding. At first the DVR wasnt coming up in the Port Forward list. now its. But when i put the ip address with the port it doesnt connect. i just get the error cant the browser couldnt connect. I have the Zosi H.265 and the modem router (its two in one) "UBC1322 - Ubee"
it possible if your isp provider is not static public ip
Yes, it is. You can do the port forwarding process and then do the DDNS configuration, they are different things.
I'm wanting to see my DVR on my Mac and the DVR is fully working it can be seen on the TV and on tablets such as an Ipad and Mobile Phones.
For me to access the DVR it asks for ActiveX to be installed but that if not mistaken cannot be installed on Mac.
I know about IETab chrome extension which does work but I don't want to pay and so it expired.
I know about installing virtual windows and going through all that don't want to mess around with all that.
-
-
All I want to know is if I can access my DVR on a browser on my Mac without ActiveX.
Can I forward the DVR to a website or something into which allows seeing of my DVR and doesn't need the use of ActiveX?
You could send the stream to a cloud service, but that will slow down your access a little bit and spending on the service you have to pay.
Take a look at this video where I show how to see an IP camera on the cloud (It's the same process for DVRs). ruclips.net/video/3aZW4UBGqWk/видео.html
Thank you so much. That was step by step for dummies like me. I am in the process of setting up system at dads house to watch over him and keep him safe. I will know in a few weeks if i did it correct. I do have 1 question though. Do i have to port each camera or can i just access the NVR to navigate all cameras and settings?
You just have to create a rule for the NVR.
Awesome video!! I have two questions:
1. The port number 34567, did you just create it at random or it's a standard port number
2. When you moved to the second PC to have access to the camera, is that PC on the same network or different network
1. The port number is for this manufacturer only (not usual). You must forward the ports that are described in the device network’s menu if you want to use such services (example port 80 for http or port 443 for https).
2. Different network via the Internet, otherwise it wouldn’t make any sense.
@@LearnCCTV Please, what do mean by "for this manufacturer"? I was thinking you would use port 21 since it's FTP.
Dear Sir, I have two remote sites with two DVR..how to view these two site in same monitor or smart TV ? hope your kind reply
Thank you man, you are the best.
Thanks.
tnx you show a great lesion
GREAT CCTV VIDEO make more... and where i can find the link for the free pdf
Great video. Now I understand it as well :)
Thank you for free download
Thank you so much for the easy explanation
You are welcome.
Thank you very much sir
In 10:26 you port forward is single in my router it asks for two ip means first local and remote ip then what should i do ? please tell me
You must be in the wring menu... It's just port forwarding and you shouldn't inform the external IP because it can change if you are using a dynamic link. Check your router's manual.
Hello buddy, how's it going? Your channel is amazing I'm learning more here than in my college thank you so much. I'm working as a technical support, in a ISP for around 6 months, I want to improve my English as well to support some foreigns clients. Could you please give me some advices that I could use to improve my English in I.T area?
Just watch everything in English and try to explain what you've learned to yourself also in English.
The title says DVR, but the video clearly shows just an IP camera, DVR could have analog cameras on it, so this video is misleading or incorrect. This video is also three years old as of now 2023. my router access is on an app way different . seems this applies to intelbras equipment? perhaps create an updated video and link it in the more place
It IS rocket science!! Your a genius!
That AV plugin on the camera is for audio, not power, right? Don't you need POE?
No. This camera does not have audio input. The connector is the power supply.
the name of software to draw? pleaseee
Does it need a Static IP from the ISP?
No. You can use this process and later use a DDNS service to keep everything working with a dynamic IP address.
Does this only work for a static IP? I have a DVR which keeps disconnecting when remote viewing and I'm not sure why?
You can set up the device to work like this and then set up the DDNS to solve the dynamic IP issue.
Thanks a lot
how if the router no have ip public..but ip private...can still forwarding?
How to open and change desired ports for a Charter/Spectrum router??
The method applies for any router. Unfortunately it's no possible for me to have every single router to make a specific video about it. I don't have this one you mentioned. I suggest just watch the video and apply the concept to setup your router.
Greetings, how can I put my IP address static on my tp-link archer mr200 wireless home router. In global operation so that others can see it. It is protected at the same time. With the Java feature enabled
Thank you very much
excellent explaination
Best tutorial. Sir just wanna ask something. Is it possible to remote the camera using my webpage? I mean if i want to make a menu option in the webpage for example. (Camera) then if i click (camera) on my webpage it will automatically go on the remote viewing of the camera and also can control if i am using ip ptz camera. Is it possible or not? Thank you
everything is possible once you forward your port and have access to your remote location but in the video tutorial, he just mentioned how to forward the port but he didn't mention that you home internet IP address was changed after every 12 - 24 hours so to avoid this problem you need DNS account
you are master bro.get it easy to us.
Thanks.
Good job with explaining, I bought a new hard wired Swann security system & I would like to live view the motion alerted camera on mobile device/phone..I was told to buy a Linksys multi purpose wireless device(cannot use Ethernet cable)so I can have a wireless bridge from dvr to router using wifi bridge (linksys Multi Purpose device using cat 5 E cable) & to router/internet.. Then this video is gonna show me how to connect the camera system to the mobile device? Always used wifi camera system, but we are having late alerts with wifi systems(sometimes 3 hrs late using wifi) connection interruptions/high-low signals so I went with hard wired system with the 1 wifi bridge to reach signal to router.. Does this sound right to you? Thank You for the video..
Some security systems have the cloud service available and I believe that's the case with Swann. So just use their service and you do NOT need port forwarding. Just in case the service is not offered by the manufactuter, just follow the step on the video to port forward for different services such as Web Browser, Client software or Mobile App. It's just a question of using the correct port and you are done.
Perfectly explained, thank you so much for this video. 🙏👍 I’ve subbed to you.
Thanks.
God sent me to you. THANK YOU!!
Will this work if my ISP provide me a dynamic IP address?
Just use these steps and then use a DDNs (No-IP or DynDNS) to take care of the Dynamic IP.
Could you explain more on this
Thankyou BIG thumbs up
please where you get an external ip of the router?
In the router network menu or use your computer to visit the webpage ipchicken.com it will show your router's IP.
My camera was purchased in china... how do I get the camera address ?
I'm using orbi netgear base station and satellite....your English is terrific..!
Hi Raymond. No matter where your buy your camera. If it's an IP camera, you should find it's address in the Network Menu.
@@LearnCCTV thank you
This is really unfamiliar territory I'm entering...I bought items piece meal without seeing the bigger picture
After a farm robbery I'm incredibly motivated to get the parts all talking to each other....
what if it will change the public ip address?
Where is he getting the port numbers from?