The Trainer #63 - Global OBD II Modes 6 Thru 10
HTML-код
- Опубликовано: 28 фев 2017
- Last time on the Trainer, we went over the first five modes of Global OBD II. We learned that there are a total of ten modes available to any technician that owns even the most inexpensive Global OBD II-capable tool. Each of these modes provides a resource that can help us troubleshoot and repair the Diagnostic Trouble Codes related to emissions - that is, most of the powertrain codes.
We also learned that the first five modes are, for the most part, ones you are used to using every day. Mode $03 for learning why the Check Engine light is illuminated, Mode $02 to see the stored Freeze Frame data related to the DTC that caused the light to come on, Mode $01 to view relative current data and finally, Mode $04 to turn the light off and clear the code(s) when we’re all done with our repair.
We’ll take a look at Modes $06 through $0A (that’s Mode 10 in computer talk), providing you an overview of what each mode does and it’s use as a diagnostic aid. You’ll learn about TIDs, CIDs and MIDs, how to make sure your customer didn’t install a used ECM without telling you, and show you that some DTCs can’t be erased no matter how hard you try.
All this, and a bit more, in the March edition of “The Trainer”.
Additional references you may find helpful!
Using the Modes of Global OBD II: www.searchautoparts.com/motora...
Finding the Right Diagnostic Path: www.searchautoparts.com/autome...
Think Like The ECM: www.searchautoparts.com/motora...
Mode $06 - A Tech's Perspective: www.searchautoparts.com/motora...
Pre-CAN Ford Misfire Tests: www.searchautoparts.com/motora...
If you'd like more info on the scan tools used in this video:
Launchtech USA:
launchtechusa.com/pad2/
Automotive Test Solutions EScan:
www.automotivetestsolutions.co...
Be sure and SUBSCRIBE to our channel so you'll be the first to know when new information is available!
@@@ FOLLOW US ON @@@
Facebook: / motoragemagazine
Twitter: / motor_age
Instagram: / motor_age
VISIT OUR WEBSITE!
www.motorage.com
TRAINING FOR PROFESSIONAL TECHNICIANS!
Motor Age Training: www.passthease.com
NACE Automechanika 2017: www.searchautoparts.com/autome...
Click this link to subscribe to the print or digital edition of Motor Age!
bit.ly/MotorAge_freesub_YT
@@@@@@@@@@@@@@@@@
Due to factors beyond the control of Motor Age, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Motor Age magazine (UBM Americas - Automotive Group) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Motor Age recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Motor Age, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Motor Age magazine or its corporate parent, UBM Americas.
Excellent Trainer. Always awesome to listen to someone who is dialed in.
Very good information, I had no idea about in some areas. Thanks to EricO who recommended this video!
Recently bought and enhanced scan tool for $200. Most I could afford, to spend on one.
Thank you for the excellent video. I complement your obvious knowledge and apreciate your smooth easy to follow delivery.
thanks Mr. Pete excellent information for those of us catching up or keeping up with the ever changing procedures .
Your the best instructor
Happy to watching video with a expert instructor like you sir Pete and Launch X431 pro is very good tools thanks
Very interesting thank you👍👍from🇦🇺
Good Afternoon Pete Meier motor age Take care and have a great day 👍
Thank you very much Mr Pete, although i don't have a scan tool but at least i know how things moves.
Great Job Pete, thanks for sharing!
Pete, that was some great info and you present it very well ! Nice !
Thanks for all this information. Very helpful. Blessings.
Great tutorial, great presentation, excellent presenter!
Thank you very much for your teaching. It is so helpful for me
Great teacher!!!
great Job Mr Pete thank for the information good presentation
Great information, thank you!
Excellent information.
Very informative video...