cls55/e55 AMG motor mount replacement DIY m113k
HTML-код
- Опубликовано: 6 сен 2024
- Little DIY I put together, not perfect but got the job done, if this video helped I'd appreciate if you liked and commented🙏
Follow me on Instagram!
/ thiccls
Gabriel S14 owner
...
Thanks a lot for this! There arent many CLS55 instructional videos out there, so this is highly appreciated. I also started making some for the things I am working on. I was able to get the driver side mount out without the need to disconnect the steering column, but it was a tight squeeze. I used Meyle mounts on my CLS55
That's awesome! Yeah i only took it off just in case, it's a single bolt so I wasn't trippen
@@thiccls3948 True that :) Are you active on MBWorld by any chance?
@@NDPhotonl not really, more active on the m113k Facebook groups and Instagram
@@thiccls3948 Too bad 😜
What's your IG
Well this is probably the best video showing what to do! I got stuck on driver side on my 07e63 you can get to the top bolt from the bottom although it is very hard but doable! Don’t think the e63 has the same space with the intake off! But I’ll try that way too!
looks like a safe way to work under a car
Time to do mine. Started getting weird codes for vacuum leaks. Was confused how the rubber hoses were popping off. Then while acting a fool in traffic I noticed the thud of my motor dropping on the mounts when I let off the throttle
😂😂😂
That is you oil cooler lines leaking bro the same thing happened with mine when my motor mounts went out
Yes! Replaced them the weekend after! Found them used on eBay for $175
I have the same leak rn my boy cars on jacks as we speak it’s that oil cooler line be careful taking the line off the oil cooler it will rip the threads right out and that’s when it gets expensive bc that what I did
Thanks lol, replaced it the week after I recorded this lol
Damn wish you was in jersey bro I need a good Mercedes’ mechanic
I'm not mechanic bro, I just learn how to fix things as they break🤣 not by choice, I'm just cheap and broke😅
@@thiccls3948same😂
I’m in nj lmk if u find one😅
Thank you for this. Is it neccessary to disconnect the steering shaft from the rack?
Of you need the extra wiggle room yes, it's only one bolt
Did you feel any shaking or vibrating after you did the job? I did the same thing as you took the little 13m steering stabilizer bolt out when I did them & then finished them up everything felt good except when I went on the freeway I let her eat up until 110 & i felt hella vibrating coming from the front 💀. I think my toe is also off on my front for my alignment i got to check it out when I get back to work on monday. Thanks for the video 💪
Nope, feels smooth till this day, no vibration even at over 150+ mph
Any tips for putting that little top plate back on the motor mount and then installing that top bolt on motor mount. I can't seem to get the angle of the screw aligned with it the angle is too great. Plus theirs very little room to even get a wrench or anything in their, and I have one of special wrenches.
I struggled with it too, you just gotta finesse it, took me about 30 minutes
@@thiccls3948 Thanks, I'll keep messing with it at least I know it's not just me. By the way I live in Vallejo and have a CLS55 also. Would love to meet up sometime
@@s2000navynitrous that's awesome, I got my Orange one wrapped in Vallejo lol, always down to meet a fellow AMG enthusiast, not too many cls55 owners
Good video thank you !
Appreciate that! Thank you
Where did you get the front lip from? I want to add that to my CLS55
eBay, just look up w219 front lip