Your channel has helped me learn so much in a very short time and I am so glad that you host this channel regularly . its one of the best channels around for PLC programming and Automation. Love it. Thank you.
Very honestly speaking I have hardly seen such a decent person like you. Please do not worry about more talking, more you talk more we know 😀. Being a good programmer it is needed to know what is happing in the controller level. Thanks a lot!
Thank you for all your videos. This has been very helpful. I have been in Rockwelll-Land for many many years and I needed some kick-start info to get me going in TIA Portal. Thanks again!
Safety IO device [6ES7 136-6BA00-0CA0] has quiet different settings than the one you showed in this video. Question:--- > Time 27:00, so we still need to connect the sensor cables to both inputs i.e. %I0.0. & %I1.0 both, but no need to separately monitor them in Safety program? So if I have 2 E-stop actuators then I should connect E-Stop_01 to %I0.0 and E-Stop_02 to %I1.0 but only monitor %I0.0 in safety program?
Hello Jamal, I am using FDI [6ES7 136-6BA00-0CA0] and the error is discrepancy failure channel state 1/0. I have tried many stuffs including the things shown in above video. Could you please help me ..TIA
Could you explain this more? Right click where? And in which configuration screen? I am struggling with my Profisafe connection despite having functioning Profinet standard I/Os
30min just talking about safety modules... and not even touching anything in depth. F-Stuff is very complex, don't forget to train on it before implementing anything on real machinery!
It's very important to talk about the technology, so that newbies like us can conceptualize the ideas. Take for instance the WinCC RunTime..I finally have an idea of its meaning after some of your videos and some personal effort into programming. I dont think youv given a talk on WinCC RT. The talk makes the idea come together very nicely.
I have safety PLC 1511 F PN... When i add safety card in my remote module it only accept F DI and for FDQ it is not allowing to give F addresses. It is saying aborted for assigning F address. What would be the problem?? Pls ans
Deckard Cain: Stay a while and listen! :-) At least you show everything. Most people only talk about few things in general and also mention that it is boring.
13:06 why two sensors? In addition to what youv said sensei,could it be that the two sensors use different technologies? Like if we wanted to measure level for instance, we could have capacitve level sensor and maybe radar level sensor? I dnt knw..
It's mostly for redundandy. If it comes to safety you better go with two sensors rather than one. You could also get some redundancy by using different technology (like you said with capacitive+ultrasonic) and use them in the program as just "signals"
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
please stop complaining about the length of the video it was very useful make it longer :)
I'll try! :D
Time management!
Time management is ok i think.
Your channel has helped me learn so much in a very short time and I am so glad that you host this channel regularly . its one of the best channels around for PLC programming and Automation. Love it. Thank you.
Very welcome!
Very honestly speaking I have hardly seen such a decent person like you. Please do not worry about more talking, more you talk more we know 😀. Being a good programmer it is needed to know what is happing in the controller level. Thanks a lot!
Finally fully professional channel. Great job 👍👍👍👍👍
You are the EKB of automation engineers. Thanks for sharing.
Nettes Video! Es ist egal, ob es länger als gewöhnlich ist! :))
Thank you for all your videos. This has been very helpful. I have been in Rockwelll-Land for many many years and I needed some kick-start info to get me going in TIA Portal. Thanks again!
Stay a while and listen... Diablo feelings.. great video!
Watching from Vietnam, thank you for sharing your knowledges, have a nice day to everyone
Safety IO device [6ES7 136-6BA00-0CA0] has quiet different settings than the one you showed in this video.
Question:--- > Time 27:00, so we still need to connect the sensor cables to both inputs i.e. %I0.0. & %I1.0 both, but no need to separately monitor them in Safety program? So if I have 2 E-stop actuators then I should connect E-Stop_01 to %I0.0 and E-Stop_02 to %I1.0 but only monitor %I0.0 in safety program?
There are MANY different devices, 100% correct! Very complex topic
Hello Jamal, I am using FDI [6ES7 136-6BA00-0CA0] and the error is discrepancy failure channel state 1/0. I have tried many stuffs including the things shown in above video. Could you please help me ..TIA
Thank you phillip for this courses
The most valuable material about safety. My regards to you.
Awesome video!! Once comment: when configuring the hardware make sure you right click and "assign profisafe address" for module to work!
Could you explain this more? Right click where? And in which configuration screen? I am struggling with my Profisafe connection despite having functioning Profinet standard I/Os
thanks phil, good sumup of some critical safety parameters!
"Stay a while and listen" - Love the diablo reference :D
Thank you sir, for very long explanation related to safety PLC, these basic knowledge it's very useful for us
I love how he says "I'm not a professional", whilst teaching professionals.
The way of explanation is awesome 👌👌
Very helpful Topic! Best place to learn tia is right here
30min just talking about safety modules... and not even touching anything in depth. F-Stuff is very complex, don't forget to train on it before implementing anything on real machinery!
It's very important to talk about the technology, so that newbies like us can conceptualize the ideas. Take for instance the WinCC RunTime..I finally have an idea of its meaning after some of your videos and some personal effort into programming. I dont think youv given a talk on WinCC RT. The talk makes the idea come together very nicely.
I have safety PLC 1511 F PN... When i add safety card in my remote module it only accept F DI and for FDQ it is not allowing to give F addresses. It is saying aborted for assigning F address. What would be the problem?? Pls ans
Deckard Cain: Stay a while and listen! :-)
At least you show everything. Most people only talk about few things in general and also mention that it is boring.
Not too long! Very helpful. Thank You
This has been very helpful. Thanks a lot!
Very helpful for educational! Thank YOU!
You are a great teacher
Thanks a lot for this information. This video is very informative for safety beginners.
Thank you, Hegam very good video !
Thanks Nice video, cant wait for the next one,and dont worry about the time and all the talking love 2 listen :-)
Please, keep going this series
13:06 why two sensors? In addition to what youv said sensei,could it be that the two sensors use different technologies? Like if we wanted to measure level for instance, we could have capacitve level sensor and maybe radar level sensor? I dnt knw..
It's mostly for redundandy. If it comes to safety you better go with two sensors rather than one. You could also get some redundancy by using different technology (like you said with capacitive+ultrasonic) and use them in the program as just "signals"
Great work !! I really appreciate your videos.
Fantastic video! You should also talk about the details... has been helpful
Parabéns pelos seus ótimos vídeos! Continue sempre!
long but very good man thanks!!
Thank you very very much for the nice explanation
Welcome to Safety 😂 Nice one, Thank you for sharing all useful info with us
very helpful way of explaining safety thank you
Thanks for Siemens Safety!
Thanks for the video!! Working on a project where this will be used
This is gold
Very Interesting , many thanks!
Thank you for the very good explanation!
Thank you, Hegam
You are as always very welcome! Next one is up!
Excellent presentations
Thanks for all!!!
Great stuff.......Thanks a Lot!!
Bedankt
Thank you!
@@hegamurl7434 Hey what happen with you Sir, wie geths ist Sir? No more videos?
Great video! Can you please make a video with ET200pro F-switch programming setup
Support the guy!!!!!!!!!!!!!! DONT FORGET TO LIKE THE VIDEO.
Would you like to compare the "F-destination address ranger for PROFIsafe address" type 1 and type 2?
Do you plan to create some video about sinamics safety? It would be nice to see some Safety Acceptance tests for drives
Have a look here: ruclips.net/video/_891fire_tM/видео.html
What does sp mean in module et200 sp? And what does et mean?
Hey, teacher, from Kenya Africa
Hey Hegamurl. Nice video as usual. One question! Are you planning to do any videos about Advance Kinematics? Keep going the good work!
Good morning Hegamurl...can u make some video on s7 400-H or S7- 1500-H Plc
Very good!
Good work 💪
Thank you!
Loved it
Please make a video about screen window.
welcome to safety... lol
thanks hegamul
Great video Thanks
Good job
Hai Sir,From India🇮🇳
thank you very much
Thank You!
Thank you
Thanks 👍
Thank you sir
How to HMI PID plz
Klasse Videos! Ist auch ein Kanal auf deutsch angedacht?
Moin und danke!
Ne, erstmal will ich alles auf Englisch halten... ist halt "die" Internetsprache
Thank u bro
Vielen Dank
thank youu
Try stressing the second syllable in 'discrepancy' instead of the third :) Your presentation is otherwise flawless. 10 E coming up!!!
Hey, ich schreib mal auf deutsch weil du glaube ja deutsch bist :D
Hast du ein Video zu Bereichszeigern? Grüße
Moin! Ne, zu Pointern habe ich noch Nichts gemacht. Scheint aber ein beliebtes Thema zu sein, ich schau mal was sich da machen lässt
groso
Great video, thanks!