SOLD! THANK YOU SIR FOR YOUR TIME! 'am definitely buying One THIS Week 😅. From where I come from now,here in the FAR EAST.. The CF-98 Retails for an equivalent to $355( February 2024). Comes with 2-15 rounds magz. Would have preferred their original 20-rounds magazine, open top, double column 👍😊
at 9:49 please tell me the exact procedure to fit the mag spring. There is a tiny hole under the follower and same hole under the base plate. Should I insert one end of spring in the tiny hole of the follower and other end of the spring in the hole of base plate?? Please tell me. It is my earnest request to you to please make a short video on how to properly assemble the CF 98 mag. I have earlier model CF 98 (double feed mag). Thank you
it depend on which mag you have. mine does not have any holes if yours has holes and the spring end tips fits comfortably into the holes then thats where they belongs.
you need a vertical board just off-screen to touch w/ your knuckles when lifting items to show more closely since your hands have a tendency to lift things out of center
What happens if hammer is disengaged by pulling the trigger when bolt / slide is not on the frame? I recently bought this pistol and removed its barrel to clean it after firing. When the cleaning was done and I was closing the slide / bolt, I accidentally pulled the trigger. Interlocked hammer was disengaged. Hope it's not gonna cause malfunction/danger.
thanks.... no worry about dry firing center fire rds bcos the bolt and firing pin are robust but as a habit try to avoid doing too many, use your hand to release the hammer slowly.
Yes, like all the police forces in the world, they dont want a bullet that can penetrate few walls and kill an inoccent resident a few rooms over but yet, they want a bullet that has stopping power so 9mm is that perfect balance.
Thanks for the "sophisticated tool" idea. I was struggling. Thanks again !
Lol. Ya welcome 😁
SOLD!
THANK YOU SIR FOR YOUR TIME!
'am definitely buying One THIS Week 😅.
From where I come from now,here in the FAR EAST..
The CF-98 Retails for an equivalent to $355( February 2024).
Comes with 2-15 rounds magz.
Would have preferred their original 20-rounds magazine, open top, double column 👍😊
A detailed video. Thank you
Glad it was helpful!
at 9:49 please tell me the exact procedure to fit the mag spring. There is a tiny hole under the follower and same hole under the base plate. Should I insert one end of spring in the tiny hole of the follower and other end of the spring in the hole of base plate?? Please tell me. It is my earnest request to you to please make a short video on how to properly assemble the CF 98 mag. I have earlier model CF 98 (double feed mag). Thank you
it depend on which mag you have. mine does not have any holes if yours has holes and the spring end tips fits comfortably into the holes then thats where they belongs.
@@gnutzguy Thank you❤️
4:00, you didn't show the feeding sequence mechanism with bolt & bcg as a whole.
good idea. next time.
you need a vertical board just off-screen
to touch w/ your knuckles when lifting items
to show more closely since your hands have
a tendency to lift things out of center
What happens if hammer is disengaged by pulling the trigger when bolt / slide is not on the frame? I recently bought this pistol and removed its barrel to clean it after firing. When the cleaning was done and I was closing the slide / bolt, I accidentally pulled the trigger. Interlocked hammer was disengaged. Hope it's not gonna cause malfunction/danger.
Can you disassemble the sights, or replace them?
rear sight can be removed but the front is fixed.
Which one better sir is Sar 9 turkey or np42 norinco
The bolt carrier group is very like Ak47's. The locking system is quite unique.
machining marks on contact surfaces
make for less friction... perfection
doubles the price
true.
@@gnutzguy what have you heard of the Radom Sporter/Pioneer AK?
@@gnutzguy plus I suspect the too perfect interior surfaces of non-contact areas indicate modern casting methods rather than forged/machined
I just got a CF98 recently...
But on the CFO transfer sheet it show the make is by EMEI and not Norinco ...
I was wondering if is the same for you
yes, manufactured by EMEI. Norinco is only an exporter, they do not manufacture.
@@gnutzguy cool thank you
Love your videos, thanks for all you do. Hey, is this gun safe to dry fire? Will it cause any damage to do so?
thanks.... no worry about dry firing center fire rds bcos the bolt and firing pin are robust but as a habit try to avoid doing too many, use your hand to release the hammer slowly.
I had CF92. And i need a magazine like this clip. How can i get it?
sorry.
How can red dot be installed on it.
nope, just laser and flash light under the barrel.
The PLA use 5.8mm version, while the police use 9mm version.
Yes, like all the police forces in the world, they dont want a bullet that can penetrate few walls and kill an inoccent resident a few rooms over but yet, they want a bullet that has stopping power so 9mm is that perfect balance.
8000 rounds =3000 $, the ammo price is a little !
It's the worst gun in the world!
Not if I only paid us$200 for it. Old adage, you get what you pay.
@@gnutzguy I liked your words👍👌
60-million+ Chinese Soldiers Don't think so..