это хорошая практика. за одним разрезом материал к пиле не несут. подготовка и маркировка массовых работ полезна по определению. два распила или 500+ разных за смену.... маркировка ОБЯЗАТЕЛЬНА. Хорошие привычки вам показывают.
Вы же понимаете, что это для демонстрации что нужно выпиливать, люди разные на свете, кто то может не понять, не все же такие умные как мы с вами сразу понимаем что выпиливать. выпиливать
In order for this hack to work there must be a 4x4 in this case on the outer wall as well to make it a direct 90° drop. Othe wise the joist will pivot and the angles you just cut will be off. And you have to cut the birdmouth at the same time. Or just do the math. But a jig works well and is fast. First contractor I worked for made a couple of jigs and did his cuts with a custom pruning chainsaw that had a holster on his belt and could keep 5 of us moving as fast as we could and would still out work us and stop for a smoke and refuel about every 20mins. That old goat was bullet proof
If you place the rafters on a block the height of the notch before marking them, it accounts for this. Though you have to get the distance from the post (center) right too by offsetting it the depth of the notch. In reality, it's easier to do the math for one rafter then use it as a pattern for the rest.
I think you misunderstood what happened there 😅. Calling off the way everything was lined up center points were never going to change only drop lower 🙂
Не получится так. После того как ты выпилишь нижний уголок у стропил, изменится угол и не совпадёт с опорным брусом. Так что это только в качестве демонстрации годится и незакрепленных стропилах, где можно свести основание.😂😂😂
You can always spot a tradesman by the amount of time he spends coloring in the cut off piece. You seriously cant remember which side of that line stays and which one goes bye bye after you cut it ever so neatly with your handsaw? Lmao. Nice video.
yeah I always mark a K on the side I'm keeping. sometimes I make my marks in a different location from where I'm making cuts and by the time I get to the saw, I'll almost certainly have forgotten wtf I'm cutting.
I absolutely love what you just showed us. Somebody’s thinking. That’s a good thing. Thank you very very very much. Have a really good day tomorrow. And God bless you and thanks for showing this.
That's incredible, a cordless saw that doesn't take batteries. Every carpenter in the world is going to want this invention when they find out about it!!!
What's the purpose of those lines? I could see if you had a crew that was assisting in cutting so they could now what pieces are trash but marking them for yourself?
@@imr71889in this case it's redundant but whenever you're fabricating a lot of pieces it's in your best interest to mark which parts of the cut are trash. You might think you won't lose track but better safe than sorry. Especially if you have ADHD
It's so whoever continues the job knows what I was thinking at the time of measurement. Yes that person might be me, but I might have an accident or if it's a home project, have to come back to it later. It's just best practice. Future you is never as smart as past you with foresight
Все прекрасно,красиво. Только нагрузка изменилась после запила. Ее проще сломать. До запила нагрузку держала допустим тонну, а после запила нарушается целосность и уже ни тонна, а шесть сот кг. Проще сломать ту где есть уже запил.
We usually do a little math. Cut one, check it then cut the other 75-100 with the 1st one which we( carpenters) call a pattern. We also like to use power tool as much as possible.
У меня та же мысль мелькнула при просмотре. Хм. Хотя я специально не учился. Но работал плотником. Эта мысль от опыта рабочего. Начинаешь критически смотреть на конструкцию. Исходя из опыта и понимания задач, материалов. Давно не работал плотником. Есть ностальгия по этой работе. Запах, расчëты, когда есть матерял, и инструмент. Всë получается. Опилки, стружка. Когда не получается. Как исправить? Сперва свои косяки. Потом косяки тех кого дали в подручные. И их надо научить. Потом оказывается что мудак ты. Когда с тобой они делали две недели нихрена не понимая. И не умея. А без тебя. Но уже умея. За три дня собрали тоже самое. 😂 забавные воспоминания.
@@Fishman20192 hand tools isn’t the cause, poor technique on marking and placement discipline is. Watch again and notice he keeps moving them out of position for marking but never accounted for it. Also notice how they were offset and not aligned when he went to mark the second king vertical.
В конце неправильный запил. Во первых их можно сбить внахлест- так надёжней. А во вторых тебе ещё конек к чему то прибивать, а ты острый угол наверху оставил!😮 Тренируйся.
That's nice for something quick and not meant to be nice. But if you want something nice, gonna have to use math and measure those angles before cutting.
На горизонтальной плоскости сделать шаблон по нужным размерам. На нём сделать первый экземпляр. Затем первый экземпляр использовать как шаблон для остальных. 👍
После выпила доски опустятся, и угол изменится.
Снизу на мауэрлате запиливается тоже в этот размер и все получится. Хотя скорее всего здесь просто показан пример запила, а не реальная стройка.
да и доска лопнет на месте спила со временем
@@Сибирякпапиннет. Только на диване!
Совершенно верно.
Это тупо на дурака. По нормальному для разметки ставится не сверзу а с торца. Тогда будет максимально точная разметка
Главное не забывать закрасить ненужную часть фломастером,иначе не получится😮
Вообще выпал с этого😂
это хорошая практика. за одним разрезом материал к пиле не несут. подготовка и маркировка массовых работ полезна по определению. два распила или 500+ разных за смену.... маркировка ОБЯЗАТЕЛЬНА.
Хорошие привычки вам показывают.
Неразукрашенный кусок не сгорит в печке. Вот и красят.
@@АЛЕКСАНДРМЕДВЕДЕВ-в5ч ну я о том же😏
Вы же понимаете, что это для демонстрации что нужно выпиливать, люди разные на свете, кто то может не понять, не все же такие умные как мы с вами сразу понимаем что выпиливать. выпиливать
As my grandpa always used to say, "Measure once, fuck it."
🤣🤣🤣
😂😂😂😂
😂👍
Sadly you had me in the first half, not gonna lie lol
😂😂
In order for this hack to work there must be a 4x4 in this case on the outer wall as well to make it a direct 90° drop. Othe wise the joist will pivot and the angles you just cut will be off. And you have to cut the birdmouth at the same time. Or just do the math. But a jig works well and is fast. First contractor I worked for made a couple of jigs and did his cuts with a custom pruning chainsaw that had a holster on his belt and could keep 5 of us moving as fast as we could and would still out work us and stop for a smoke and refuel about every 20mins. That old goat was bullet proof
Amazing how the boards magically got shorter so the notches were in the right place, and not too high as the were when you marked them😂😂😂
That's right! I was thinking this isn't right, but couldn't figure out what is silly.
Exactly!!
If you place the rafters on a block the height of the notch before marking them, it accounts for this. Though you have to get the distance from the post (center) right too by offsetting it the depth of the notch.
In reality, it's easier to do the math for one rafter then use it as a pattern for the rest.
I am sure they used the spent pieces to raise the center piece up to fit just right. See? no waste.
No clue, really
I think you misunderstood what happened there 😅. Calling off the way everything was lined up center points were never going to change only drop lower 🙂
Didn’t show the top of the finished piece.
Infatti, nella sequenza precedente già si nota che non coincidono!😂
That's because he didn't start from the center of the 4/4. He's got 2 different angles
Exactly my point.
You can tell it wasn't going to fit properly.
It doesnt match😅
Не получится так. После того как ты выпилишь нижний уголок у стропил, изменится угол и не совпадёт с опорным брусом. Так что это только в качестве демонстрации годится и незакрепленных стропилах, где можно свести основание.😂😂😂
Чтобы получилось надо ещё такой же кусок выпилить в нижней части стропилины, где она на мауэрлат ложится.)
now I understand, thanks for the clarification!!!
Если не штриховать - вообще не понятно, что отрезать, а что оставить)))
That's right. It is impossible to tell. You could cut off the long end accidentally.
Lol
И в правду...)))
😂😂😂😂,
я тоже ржал когда увидел что он штрихует куски
You can always spot a tradesman by the amount of time he spends coloring in the cut off piece. You seriously cant remember which side of that line stays and which one goes bye bye after you cut it ever so neatly with your handsaw? Lmao. Nice video.
Once you cut something wrong, you get in the habit of marking even when it obvious.
@@kenq7948 100%
yeah I always mark a K on the side I'm keeping. sometimes I make my marks in a different location from where I'm making cuts and by the time I get to the saw, I'll almost certainly have forgotten wtf I'm cutting.
Никогда не видел что бы люди так быстро пилили, браво!
For a carpenter, this is the equivalent of coloring outside the lines. 😂
I absolutely love what you just showed us. Somebody’s thinking. That’s a good thing. Thank you very very very much. Have a really good day tomorrow. And God bless you and thanks for showing this.
Огоо...
Но, что-то не сходиься с длиной досок и углом наклона при этом !
Ага. Нужно и снизу подпиливать тогда.
Изначально, эта конструкция должна стоять, на подставке в толщину линейки или брусков. А потом после осадки встанет на своё место
Мужик вручную пилит быстрее чем бензопила)))))
😂😂😂двумя разными пилами
It's Balsa Wood..
@@hiscifi2986 It's IRWIN saw☝️😊
That's incredible, a cordless saw that doesn't take batteries. Every carpenter in the world is going to want this invention when they find out about it!!!
LOL!
Как ловко автор срезал верх в конце видео,ведь всем понятно что там неровно
😂😂😂😂
Ага, так еще и низ когда зарежет верх съеб... 😂
Ja das wollte ich auch sehen 😂
Это проблема разметки. Принцип ясен. Размечайте аккуратней и получите ровненько. А критиковать дело нехитрое.😅
You know it man
А ЧЁ ЭТОТ УМЕЛЕЦ САМОРЕЗЫ НЕПОВКРУЧИВАЛ😂ТРЕБУЮ ПРОДОЛЖЕНИЯ,БАНКЕТА!!!😂
Its better to overlap ridge rafters rather than but them , it ties the structure together better
How do you put the roof on at the top of we do it that way
@@mishmashmechanic not a framer but I imagine he means you'd put them next to each other and just cut the corners that stick out.
Хорошая бесшумная бензопила , тоже такую хочу 😂😂😂
Then you realise you're slope is 45° not 60°. Oops. 2 new planks please.
He made the top out of focus so you couldn’t see that it was off😒
And this guy has 7 1/2 million followers wow
And the triangles he cut, are not even either one is deeper than the other, even if they both go up together
Ah oui! Merci infiniment pour la précision! 🙏🏽💗🌞🌈👩🏼🦱☮️🕊☮️🕊☮️🕊🕊🕊
That method guarantees slightly incorrect angles every time 😂
Line.cut.line.cut....
Use a speed square, line all together, cut all together, Mount all together, time saved for A beer.
Que maravilha postar um ensino desse, parabéns isso sim é aula na internet 👏👏
I'm glad he drew the red scribbles, or else I wouldn't know what to cut off
Beat me to it.
It's a common woodworking technique.
Always Mark the waste material!
@@MA-mo7yj Or choose not do so and learn the hard way! ;-)
El marcador me gustaría tener .😊
Pero el trabajo también es perfecto 👌 y muy bien ilustrado .
Gracias 🙂
Love the red squiggly lines.😅 just incase they thought those were the " use these" pieces. 😅
I was thinking the same thing 😅
Wasting ink
What's the purpose of those lines? I could see if you had a crew that was assisting in cutting so they could now what pieces are trash but marking them for yourself?
@@imr71889in this case it's redundant but whenever you're fabricating a lot of pieces it's in your best interest to mark which parts of the cut are trash. You might think you won't lose track but better safe than sorry. Especially if you have ADHD
It's so whoever continues the job knows what I was thinking at the time of measurement. Yes that person might be me, but I might have an accident or if it's a home project, have to come back to it later. It's just best practice. Future you is never as smart as past you with foresight
This is so impressive! I've never seen anyone that fast at a hand saw before!
Hey, i did this, now my plank is 3 inches short at the bottom!
This is what I immediately saw........wait! Did I just say something about his saw technique. 😮😅probably not.😢
😂😂😂😂😂😂😂😂😂😂😂
Actually it’s longer at the bottom if you do it like this.
Perfekt 👍🏼 👍🏼
Before I read y'all response I said he have to dig the other end down into the ground etc. What says yous?
Все прекрасно,красиво. Только нагрузка изменилась после запила. Ее проще сломать. До запила нагрузку держала допустим тонну, а после запила нарушается целосность и уже ни тонна, а шесть сот кг. Проще сломать ту где есть уже запил.
Самое интересное не попало в кадр, как стоят доски слева и с права. Обязательно нужен жёлтый угольник такой же ширины, он универсален для любого угла
Super bravo, j'adore les vrais charpentiers qui font le travail de la création à pose...
You're my hero You did all that with a hand Saw 😂😂😂
That’s a lot of extra work!…. But for somebody who does not work with would regularly… good tips!
We usually do a little math. Cut one, check it then cut the other 75-100 with the 1st one which we( carpenters) call a pattern. We also like to use power tool as much as possible.
100%
Gosh dang it! This was so satifying! Good job!
Пила хорошая , быстро пилит и тихо - самое главное.
Это не пила)) Это у него так рука быстро двигается, натренированная.
Конечный узел сращивания следует делать внахлёст, друг на друга рядом, а не подрезая их, так как на видео. Хотя для фронтонов так проще.
У меня та же мысль мелькнула при просмотре. Хм. Хотя я специально не учился. Но работал плотником. Эта мысль от опыта рабочего. Начинаешь критически смотреть на конструкцию. Исходя из опыта и понимания задач, материалов. Давно не работал плотником. Есть ностальгия по этой работе. Запах, расчëты, когда есть матерял, и инструмент. Всë получается. Опилки, стружка. Когда не получается. Как исправить? Сперва свои косяки. Потом косяки тех кого дали в подручные. И их надо научить. Потом оказывается что мудак ты. Когда с тобой они делали две недели нихрена не понимая. И не умея. А без тебя. Но уже умея. За три дня собрали тоже самое. 😂 забавные воспоминания.
Those top pieces definitely didn't match up 😂😂
They did fine for the example of How to cut seat and heel, especially by hand! Duh. Guessing you’ve never understood using hand tools!
@@Fishman20192 hand tools isn’t the cause, poor technique on marking and placement discipline is. Watch again and notice he keeps moving them out of position for marking but never accounted for it. Also notice how they were offset and not aligned when he went to mark the second king vertical.
@@Fishman20192 I've been a joiner for 33yrs...shut up and sit down
When your "ta-daaah!!" moment turns out to be an "oh shit!" moment, but you post it anyway 😂
People joke Alot but I enjoy these. They are Great
Good thing he remembered to squiggle the parts he needed to discard. I hate it when I throw away boards but keep the blocks!
Не правильно расчертил! Горизонт должен быть по верхней плоскости бруса! А так он вырезы сделал выше и при уклоне бревна вырезы не сойдутся!
Сойдутся , если них укоротит на глубину ( по угольнику) , вот только пусть покажет как после этого он делает пятку на стропильной ноге со свесом !!
That’s very neat for just freehand like that 👌
И угол поменялся
As my great uncle used to say, “better a shit joint than a good blunt”
Бро, хорошая работа и без ненужной болтавни. Привет из России ❤
Он криво всё сделал. Что там хорошего?
手ノコでここまで綺麗に切れることが凄い!
В конце неправильный запил.
Во первых их можно сбить внахлест- так надёжней.
А во вторых тебе ещё конек к чему то прибивать, а ты острый угол наверху оставил!😮
Тренируйся.
Дятл
Он показал это в примере!! Но так нельзя пилить лучше не стоит
И всё же, как лучше: внахлёст или встык с фиксацией "шабашками"?
@@Andrey_Oserov нахлест надежно
@@Kalsyn005
Спасибо. Правильно всё же: "второпях, вскоре, взаимно, вместо, внахлёст, ..."
Where do i learn to saw that fast?
Final cut pro 😂
Buy an electric saw
Colonel Steve Austin.
В этом случае нужно и низ выпиливать. Иначе доска не ляжет ровно, так как меняется Уго наклона..... Делитанты....
Супер ,жаль что так не работает в строительстве, но для летней беседки пожалуй сойдет
He missed the last cut. The board was raised
Notice how both bits of wood don't actually touch each other enough
My favorite part is the power saw! 😅
Man those battery operated tools sure are quick now days 😂
Simple! Brilliant! (As long as you know how...) 👍
The best part was the sound effects while cutting 😂
Its really good you marked the pieces you are throwing away. I might have thrown the wrong part in the trash.
Good job he scribbled on the waste bit otherwise we would never have guessed.
Must be one of those new high speed reciprocating saws!
I’m sure glad he used that red pencil to show which part to throw away.
por fin algo hecho sin maquinas electricas muy bueno
It's not a tip. It's just thinking and understanding basic geometry.
I just feel like this process was a lot longer and harder than it needed to be
Пересмотрела несколько раз. Полезный совет, но звук ножовки в ускоренном виде это прям что то...настроение поднялось, хотя на улице дождь идет
I like how the last shot hid how the off the point came out
My hands have not moved that quickly since I gave up coffee and cocaine.
That's a very fast saw! Heck yeah!😮
Et la pointe foirée ^^
Très bonne technique sans prise de cote en tout cas. :-)
M140i giving it some beans in the background 😅
carpenters don't put 9 lines for what needs cut 😂😂😂😂
All I learned from this is, U need a red crayon to make beautiful, complicated cuts.
Эра элекролобзиков ещё не наступила...😂😂😂😂😂😂😂😂😂
Гениально😂😂😂😂
Голь на выдумку хитра
It's mind boggling to me that he has to scratch out the piece he's not gonna use, like how would he not remember? LOL
This is believable. The tops didn't match up. We call this kind of Carpenter "a hack" or a "wood butcher".
Каментария буткул бомани гапла лекин хамма ушодан чикади зур
That sawzall blade is HUGE !!!!!
I respect the fact they gave a fuck to squiggly out the useless pieces
My grandpa use to build houses like that! Now they have power tools
*used
The fastest hand sawer in the world. Good job.
Carpentry is just different levels of that box with the shapes as a kid
That's nice for something quick and not meant to be nice. But if you want something nice, gonna have to use math and measure those angles before cutting.
We are glad for you that you are rediscovering America 🥴
Good thing he marked out the piece he was gonna throw away. It would have been real embarrassing if he showed us 4 triangles on a post.
Comments never disapoint, so many experts watching you tube videos offering their advice!
That is how my dad built his own trusses ❤back in 1954 !! I am living in his home now
Только диагональный забил совпадёт ,в первом случае, при наклоне, углы поменяются.
It’s a lot harder then you think to cut an angle like that straight.with a hand saw. Nice job.
*than
I like how he shades in the waste part just to remind himself 😂
cross braced without the cuts for aesthetics is alot stronger
He's not telling you about the 48 years he spent looking for those 2x4s at home Depot. so perfecto🎉
Nice work! That hand saw seems like it needs sharpened though
*sharpening
Ive never in my life ,seen a saw zall blade that big before!!¡😊
Если в конце уголочек не показать, то можно подумать, что он сошёлся)
Oh my Goshhh!!!... Is it possible to get these knowledges and skills¿¿¡...
Мне звук понравился 😂 как на пилораме😂
Не показал, а ведь их либо снизу пилить, либо под них подкапывать...😂 Геометрия твоё всё!
На горизонтальной плоскости сделать шаблон по нужным размерам.
На нём сделать первый экземпляр. Затем первый экземпляр использовать как шаблон для остальных. 👍
Умелец не показал, что противоположный конец "доски" был поднят на высоту запила, перед разметкой.😊
❤❤❤maravilhoso um ótimo trabalho
Very smart, it would also be smart if you use a power tool to cut the wood...