I enjoy watching how the guy make and create various useful items, I like to create things, but now due to health problems all I can do is enjoy watching👍👍
Wow how amazing is that , very nice and i bet it is very strong to support the piece of glass you set on top of it you could even use the middle part to store thing that might be fraggle cause they would be safe from any kind of damage inside the tape. I dont know just a thought but very nice i like it a lot . Great job .
Fantastic, excellent skills, beautiful end product. But, for those of us without a full wood workshop, this whole project would be so much simpler if using a cnc router or even laser cutter.
This could be fun to do with wide craft sticks (Tongue depressers). The come pre sized & pre sanded. Just need to figure out how many are needed to loop around without breaking.
The blade was covered by the timber for the most of the cuts, no mention of the band saw then? and I'd have been more worried about that and I'm also a wood worker, the woodwork workshop is full of potential horrors we learn to adapt and stay safe
at 0:40 he's basically freehanding the piece of wood on a table saw, which is one thing you should never do Admittedly he doesn't have a choice because it's a homemade table saw with no fence...
Hello . Thank you for your beautiful work, I follow your example. You make very beautiful and creative works. I just have one question. What kind of glue is that yellow glue you use to connect the sticks? If you make it by hand, what is the combination of materials you use?
it was a nice design but the finishing was very poor. I don't know why you did not make it shining and stain the woods. I was a bit disappointed despite a good design and technique.
most likely just the same glue he was using before with a heavy amount of sawdust mixed in. after it cures it is almost indistinguishable from whole wood after sanding
ماشاء الله تبارك الرحمن تسلم ايدك عمل فني جميل تحياتي لك من فلسطين غزه
Aku suka proses pembuatan nya, sangat detail dan bagus 😊😊
amazing....ilike
Harika super super love
Beautiful!
Bardzo piękna robota, do końca nie wiedziałem co z tego wyjdzie. Pozdrowienia z Polski.
Super awesome 👌
Words is not enough to say that is so beautiful ❤️❤️❤️
Don’t know if i would go that far.. they were very aesthetic for sure
Thank you it's so amazing how simple things can be such beauty
تصميم جميل جدا
Amazingly beautiful. ❤️👍🇺🇸
Truly gorgeous
прекрасное клёкало получилось
Muy buena creasion es un grande maestro saludos
Wow! That was incredible to watch!
Thank you for sharing!!
Excellent.
Very Nice👌👌👌
i love you
Bravo très belle idée beau travail
Комментарий в поддержку канала и ролика, а также труда мастера.
Thank you very much
Very Good......
Very cool
Мастер досконально знает своё ремесло! Поразительно точно каждое действие.
Nice 👍👍 good job .
Stunning creations and an immaculate woodworking shop. ❤️👍🇺🇸
I enjoy watching how the guy make and create various useful items, I like to create things, but now due to health problems all I can do is enjoy watching👍👍
Hope you get better and recover to enjoy doing the things you like
Absolutely beautiful
Люблю такого рода видео! 😍👍
Why does no one have a crown guard fitted to their circular saws in these videos ? and that bandsaw with no guards at all, OMG scary
Nice
Wow how amazing is that , very nice and i bet it is very strong to support the piece of glass you set on top of it you could even use the middle part to store thing that might be fraggle cause they would be safe from any kind of damage inside the tape. I dont know just a thought but very nice i like it a lot . Great job .
Thank you, like, subscribe to support my channel
TOP demais.
Parabéns pelo trabalho.
Abraços brother.
🙏👏👏👏🤘👊
Precioso! Buen trabajo! 🤩
that small one would also make a neet lamp
Amazing! 😍
Руки у мастера золотые!
May i say, JUST WOW!👍
Tank you very nice 👍 and good 👌my friend ❤️
Amazing
Parabéns perfect 👏👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷
Could you imagine dusting that thing!!!!
Fantastic, excellent skills, beautiful end product. But, for those of us without a full wood workshop, this whole project would be so much simpler if using a cnc router or even laser cutter.
Interesting but did anyone else think it looked like a giant air filter besides me? Lol. Not much legroom but fun idea.
LOL, I'm glad I wasn't the only one to think that!
wow vet nice
Very interesting project. Very unique. ❤
I wish you would lower the blade guide.
This could be fun to do with wide craft sticks (Tongue depressers). The come pre sized & pre sanded. Just need to figure out how many are needed to loop around without breaking.
Оригинальный пылесборник
As a former trauma nurse, I can’t tell you how frightening it was to watch you cut those boards on the table saw with no push stick!!!
I was thinking the same thing at that point... nice equipment, should have the resources to do it right!
The blade was covered by the timber for the most of the cuts, no mention of the band saw then? and I'd have been more worried about that and I'm also a wood worker, the woodwork workshop is full of potential horrors we learn to adapt and stay safe
at 0:40 he's basically freehanding the piece of wood on a table saw, which is one thing you should never do
Admittedly he doesn't have a choice because it's a homemade table saw with no fence...
00ppppppppp0
Lol that you're thinking a pushstick would solve problems with that cut
👍👍👍👍👍
Hello . Thank you for your beautiful work, I follow your example. You make very beautiful and creative works. I just have one question. What kind of glue is that yellow glue you use to connect the sticks? If you make it by hand, what is the combination of materials you use?
The level of inconsistency is just grinch
it was a nice design but the finishing was very poor. I don't know why you did not make it shining and stain the woods. I was a bit disappointed despite a good design and technique.
Very nice work !!
How do you make the wood glue paste?
Hey. It's PVA glue mixed with fine wood shavings (literally dust)
@@ZoMBYaKa86 thanks!
What's the name and brand of the green tool
Judging by the lax safety habits I'd say it's not US or Europe. Using a circular saw without pushsticks or riving knifes? South East Asia most likely!
I hate to think of how you would dust that. Air compressor? Pressure washer?!
Feather duster.
like most things that take little effort and imagination, it is just so so.
Did you come here just to sat that?
@@mrsb33 Hell no I was led in by the deceptive title "Most Amazing" It ain't. It's mediocre at best.
What kind of glue are they using? Looks like peanut butter
most likely just the same glue he was using before with a heavy amount of sawdust mixed in. after it cures it is almost indistinguishable from whole wood after sanding
W
unimpressed
Buenas ideas, bonitos diseños pero ejecución chapucera.
Sloppy marking, cutting, and gluing techniques, and missed lots of spots with painting--hard to do with a sprayer, but he managed it. Not impressed.
The design is not bad but the way you did it shows that there's no pride for you to make these. Badly measure and worse cuts.
What a waste of good wood!!!! Wood waster!!!
More wood is wasted making toilet paper for you! At least the builder accomplished something. In your case nothing was accomplished.😊
Nice