Grandma3 Midi to OSC - Part II: Midi to OSC mapping using Chataigne

Part II of this series deals how to map control elements of a X-Touch Compact midi controller via OSC to GrandMA3 step by step. The mapping is done by the free software "Chataigne".
benjamin.kuperberg.fr/chataig...
My website with additional material and files for downloads.
stkrumm.de/grandma3-tutorial/
There is an error in the spoken comment at 3:24. Should read "control change 9".
Although I use the Behringer X-Touch Compact, any other midi controller or even a midi keyboard can be used.
A word of warning:
I had issues with 3 of the X-Touch devices. Behringer was very helpful, but finally I had to decide to live with it and build a work around.
All my devices didn't initialize correctly afte power on.
The faders would only send either "0" or "127".
I must activate layer "B" and switch back to "A" for sending a continuous stream of values between 1 and 100.
One error remains. On fader movement a CC26 is sent sporadically.

[@sbsonido]

already waiting for the next videos!! thanks

[@andreassalvisberg6425]

works perfectly! thanks so much for this tutorial

[@MarcoBento]

Fantastic!!!! GO GO GO!!!! Next video please 🙂

[@CineMuck84]

fantastic! thank you so much

[@enriquejaimeromero172]

chataigne es Fantastico excelente

[@lightinglizard7739]

I can set my output into grandma3 to control playback executor on pages 1 - 9 but can't for 10+ Is there a way to do this? I have one controller I like to set to page 10 and another controller that I unlock to floating faders for whatever page I have selected, Would Like to keep my playback pools 1-9 open for show

[@stefankrumm6709]

Hi, does page #10 already exist in your show file?

[@stefankrumm6709]

Hi, the problem is caused by the GrandMA3-Chataigne module. For some reason, the number of pages is restricted to 9. You can easily fix it by locating the "module.json" file in the plugin folder. In a text editor open the file and search for the executor entries. In the line
"Page": {"type":"Integer","min":1,"max":9,"default":1}, change "9" to the number of pages you need. On a Mac, the file lives in Documents/Chataigne/modules/grandMA3-Chataigne-Module-main.
cheers
Stefan

[@lightinglizard7739]

excellent and thanks for the quick response wow that was fast, one more question : I can toggle my cues saved on playback executors with my midi controller however lets say if I hit store or delete than a button on my midi controller assigned to an empty executor nothing happens, I want to setup a cue, press store and then press the empty slot on my midi controller to save, is this possible?

[@lightinglizard7739]

like I assigned my apc mini to 3.416 3.417 3.418 etc and they're all blank cues i want to press store than button 1 on my physical controller and have it store on assigned executor (lets say 3.416) the page is created and i have cues on 3.301-3.310 already made

[@stefankrumm6709]

@@lightinglizard7739 Hi, I am afraid that is not possible (but I will give it a try).

[@connorelder5798]

my master only jumps from 0 to 100 how do i make it variable

[@stefankrumm6709]

If you send me your Chataigne file I could check what‘s wrong.

[@_pasi2996]

@@stefankrumm6709 Sadly i have the same issues. What could i do ?

[@stefankrumm6709]

@@_pasi2996 Hi, did you set a filter/remapping? See video at 3:35. If you don't have success, please mail me your Chataigne file, I will try to fix it. [e-mail]

[@_pasi2996]

@@stefankrumm6709 yes, i had the remapping in there.
I didn't saved the file so i just recreated it and now it works. i don't knew what i was doing wrong before. But Thanks :D