If you ever start making this for collectors I would love to be first in line, lol. I think I will do one in CAD, and 3D print it for now. I have to say it’s a long look for the K-bar I carry as a soldier.
Do you know what kind of metal did you use here? Was it mild steel, because I have never seen sheet metal like this that wasn't mild steel. Also I love your work :)
Selamün aleyküm ben türkiye,denim. Sizin ülkeniz neresi ..Videolarınızı büyük bir keyifle izliyorum.Bu tür ustaların yaptığı işlerin çoğunu yotube dan izliyorum, Harıkasınız çok becereklisiniz. Sanırım Türkiye,ye gönderme imkanı yoktur. Eğer varsa kullanışlı bir bıçak fiyatı nedir.Kısaca bilgi verirseniz çok sevinirim.Kolay gelsin.
@@sharpsteels4635 The materials I bought online, I don’t think I can buy them in your area. If you want to make one yourself, why not try other steels.
@@creatorqi yeah i tried but leaf spring is too thick and my forge is very weak, i need some source from which i get steel of perfect thickness just like yours. I still searching for source, I would love some tips
@@sharpsteels4635 I mostly buy materials from the Internet, I hardly go to the store to buy, because I can't find it either. You should look for it at your local hardware store or grocery store.
Man I just wanted to know... is an angle grinder with a flap disk and a cutting one, plus a belt sander and a buncha files enough for makin knives? Sharpening stones and drills not included Plus I made a knife that I wanted you to see, maybe give the cons of it? Where can I send it to you
Sorry, there is no way to send your blade to me. The tools you listed are enough to make a blade, but if you want to install a knife handle, a drill bit and an electric drill are indispensable.
@@creatorqi Thanks, I was gonna ask that too. Lovely finish. Also, what grit of sandpaper did you finish with before dunking the blade in the fe-chloride?
Good Build effort! Like how you handled some of the tight corners and angles. What steel was used for the blade? You didnt show the normalizing or how you achieved the stone wash, im sure most of your viewers would like to see that process, even if its a bit ghetto. :)
This is manganese steel, a material that has long been annealed. The stone washing process is skipped and there is no record. The next related video will be shown.
@@creatorqi Annealing and normalizing are very different. One softens the steel and relieves internal stresses, the other aids ion grain refinement. If no normalizing was done, the grain of that steel will be coarse and wont hold up to abuse, nor will its edge retention be as good as it could be.
素晴らしい仕事ですね、soo cool work, it can be use even for military , just one question , dude wich war you wanna go to !? 😊 i’ll be in your side . どんな 金属を使いましたでしょうか？お返事頂ければ嬉しいですね。
![DDG & G Herbo - Nosey [Official Video]](http://i.ytimg.com/vi/I9Ra0Zc2NlQ/mqdefault.jpg)
Pure talent 👌🏽 came to see a paracord handle
and treated to a beautifully made knife.
If you ever start making this for collectors I would love to be first in line, lol. I think I will do one in CAD, and 3D print it for now. I have to say it’s a long look for the K-bar I carry as a soldier.
Металлический бриллиант💎
My favorite knife, from my favorite game
beautiful job, I am waiting for your next projects. Greetings :D
i love your works ... keep going
Oh by the way cool knife
Fantastic
Magnificent!
Like!
Beautiful Knife! I see, you are wearing your good fire resitant angle grinder and welding shoes
Art maker
Very nice indeed...
Beautiful work
Вышел ёжик из тумана, вынул ножик из кармана.👍
very cool
かっこいい
Is nice dude
Thanks!
to grip the blade well, you must make the handle thick.. it became a nice knife..
That's right, the thick handle is more comfortable to hold.
This was an awesome recreation of the CSGO knife! Great job! I just did the Damascus camo on my channel!
A+ man
Thank you, sir!
Do you know what kind of metal did you use here? Was it mild steel, because I have never seen sheet metal like this that wasn't mild steel.
Also I love your work :)
This is 65 manganese steel, I bought a soft material, and it has hardness after quenching.
Knife super..👍👍👍👍👍👍👌👌👌👌
❤️❤️
Selamün aleyküm ben türkiye,denim. Sizin ülkeniz neresi ..Videolarınızı büyük bir keyifle izliyorum.Bu tür ustaların yaptığı işlerin çoğunu yotube dan izliyorum, Harıkasınız çok becereklisiniz. Sanırım Türkiye,ye gönderme imkanı yoktur. Eğer varsa kullanışlı bir bıçak fiyatı nedir.Kısaca bilgi verirseniz çok sevinirim.Kolay gelsin.
Thank you friends in Turkey for liking my work.
I have never sold a knife, nor have I calculated its price.
good job
It a really nice blade... you could have put more effort in making the handle better.
what grit sandpaper do you use on your belt sander?
80 grit abrasive belt.
What was the source of the steel you used? I mean what was it before, like a leaf spring or something
Not a leaf spring, but another type of spring sheet, 65 manganese steel (unquenched).
@@creatorqithanks for the reply, can you tell me how do you get it, i mean the source
@@sharpsteels4635 The materials I bought online, I don’t think I can buy them in your area. If you want to make one yourself, why not try other steels.
@@creatorqi yeah i tried but leaf spring is too thick and my forge is very weak, i need some source from which i get steel of perfect thickness just like yours. I still searching for source, I would love some tips
@@sharpsteels4635 I mostly buy materials from the Internet, I hardly go to the store to buy, because I can't find it either. You should look for it at your local hardware store or grocery store.
What type of metal was used and can I use leaf spring 5160 type metal.
I use 65 manganese steel, and 5160 steel would a good choice, too.
I use 65 manganese steel, and 5160 steel would a good choice, too.
Witam gdzie idzie pobrać wzory tych noży? Pozdrawiam serdecznie
Almost every video has a template download link in the description, you can download it directly
@@creatorqi dziękuję za odpowiedź pozdrawiam
Should’ve also done the bo2 knife seeing as is very similar
Man I just wanted to know... is an angle grinder with a flap disk and a cutting one, plus a belt sander and a buncha files enough for makin knives? Sharpening stones and drills not included
Plus I made a knife that I wanted you to see, maybe give the cons of it? Where can I send it to you
Sorry, there is no way to send your blade to me. The tools you listed are enough to make a blade, but if you want to install a knife handle, a drill bit and an electric drill are indispensable.
@@creatorqi alright man thanks for the information
👏👏👏👏
Your pretty good at that. Is there any way you could do a video on Weskers knife from resident evil 5. 👍
I‘ll consider making such a knife someday in the future.
You got the skills. I have no doubt you can do it
excellent work. What material was used for the Blade surface treatment. Best regards
It is ferric chloride.
@@creatorqi thanks
@@creatorqi Thanks, I was gonna ask that too. Lovely finish. Also, what grit of sandpaper did you finish with before dunking the blade in the fe-chloride?
Good Build effort! Like how you handled some of the tight corners and angles. What steel was used for the blade? You didnt show the normalizing or how you achieved the stone wash, im sure most of your viewers would like to see that process, even if its a bit ghetto. :)
This is manganese steel, a material that has long been annealed.
The stone washing process is skipped and there is no record. The next related video will be shown.
@@creatorqi Annealing and normalizing are very different. One softens the steel and relieves internal stresses, the other aids ion grain refinement. If no normalizing was done, the grain of that steel will be coarse and wont hold up to abuse, nor will its edge retention be as good as it could be.
En sonunda kullandığınız bileme taşının cinsi nedir.Girit taşımı mesela.bunun gibi.
They are #1000, #5000, and #10000 Whetstones. As for which whetstone is, I am not sure.
👍👍👍👍👍
😊
Will construction steel that is used for building work for this ?
This is manganese steel, not low carbon steel for construction.
Thanks for clarifying you make good work !
Gorgeous work! I would love to buy such a knife from you. Is this possible?
Sorry bro, due to local legal restrictions, it cannot be mailed.
很强啊这次
是吗，感觉还行吧？😀
@@creatorqi 挺好，一定多从实用主义出发
Perfect
what metal alloy was used?
65Mn Steel.
@@creatorqi Thank you
can you tell me about the length of this knife ??
Total length 300mm.
Thank you for your details..
что означает длинный ноготь на мизинце?
Sorry, I do not understand what you mean
@@creatorqi what does a long nail on the little finger mean?
Le prix de ce bijou ?
Not for sale, sir.
where to buy?
Sorry sir, only one, not for sale.
Can I has one?
Sorry sir, not for sale.
just another shitty stamped knife should be forged properly
Sandpaper is coarse or fine
👍👍👍
I always like the tactical knifes and this one it's out of this world 🌎 amazing job 👏
another amazing design! so nice to see such great creativity.
Elegancki 🇵🇱 🐺🐺🐺⚔❗
NICE NICE NICE
❤❤
please share the dimensions of the apparatus.
I like this shape!!
Pretty cool design
what is the thickness of the metal here?
great job, that looks awesome!
take my money
Well done creator ci good my from uzbekistan🇺🇿🇺🇿
Thanks your support, sir!
Thank you for making your templates available 🙏
You got those lines crispy, nice work!
Lovely
Very nice knife, very clean work, great channel in general.
素晴らしい仕事ですね、soo cool work, it can be use even for military , just one question , dude wich war you wanna go to !? 😊 i’ll be in your side .
どんな 金属を使いましたでしょうか？お返事頂ければ嬉しいですね。
May the world be peaceful and there will never be war.
This is manganese steel, sir.
Bellissimo!!!! Ottimo lavoro. Bravo!!!
Beautiful knife.. 👍
Awesome informational educational video experience Y'alls God Bless Ya 🙏
Stay safe, my friend.
Why did you need to make a hole for the lanyard, if you cut off the ends of the paracord?
Not adding a hole always feels uncoordinated. If you like, this hole can be tied to a rope or used as a hanging hole.
Parabéns, essa faca é de mais, gostei muito... onde posso adquirir?
This is the only one. I'm glad you like this knife.
Đẹp .
I love this knife! Can i buy it anywhere from you or is it just for you
Only one, sir. Not for sale.
@@creatorqi understood. I'm a massive fan though, so if you ever want to sell it pls contact me :)
How wide knive should be
about this knife, 35mm max.
👍🏻
Really nice knife what did you treat it with to give it that finish?
Unkown what you mean.
@@creatorqi the blade treatment part you dipped it in a liquid to give it a very cool finish
Now I know you.😅
@@creatorqi what do you mean
What metal did you use?
Manganese Steel.
cool, do you have a good supplier? seems to be hard to find.
I don't have any supplier. Maybe you should try other steels that are easier to find.
Where did you find yours?
@@randallblack6525 Online shopping in Taobao. I think you should look for it at your local hardware store or grocery store.