Reasons why my channel has low subs is because I do not do Facebook, Tiktok or Instagram or any other platform. I do not edit my videos or have fancy thumbnails. I do not have intros with music. I do not do shorts. I do not livestream. I do not sell merchandise. I am not sponsored. I have never had a give a way. My channel is not monetized. I do not give out links for Paystreak discount promotion codes on products. I do not graphically promote dealer's or manufacturers logos. I do not ask my viewers for money. I do not claim to be an expert. I do not try to convince my viewers that I am using the "best" detector. I do like to keep it simple. Thanks for watching and commenting Johnny.
I've also noticed that with big coils in heavy iron contamination, if there is iron near the edges of the coils as you end or begin your swing, NOT under THEM, they will also create falsing. It seems like you have a lot of contamination at this site as well which is why you're not hitting the coin from every angle. Its similar trying to detect near the playground poles with a big coil. I did this test with a large rusty bolt about 4 inches away from the edge of my Legend coil as I swing and I couldn't hit a silver dime on the surface let alone in the ground. I never went over the bolt...........it was just beside the edge of my coil.
Thats some serious mineralization. My yard sounds about the same, but its purely from iron trash. Dropping sensitivity to 12-15 helped somewhat with the stock coil, getting a 6 inch coil made a world of a difference.
hello, first of all I want to thank you for your channel and the many videos posted daily, I have taken a lot of advantage when I go out with the detector.. I have the legend and I am very happy with the detector, I usually use it at 15 kw and I have had good results ..my question is why do you always use the recovery speed at maximum or almost ..in this video wouldn't you have a better result putting it at 6 or less!? Thanks.
My ground is dense clay and is mineralized. Dropping the recovery speed low does not get you deeper targets in mineralized ground. If I set the recovery speed at 6, I probably would not find much. If you are hunting in mild ground with few minerals, you can get away with lower recovery speeds.
Hi, I'm wondering your thoughts on multi frequency and steel cored coins I heard someone say that the vanquish dosnt work well on modern canadian coins, so I asked that question in a canadian Facebook group About 4 people said the vanquish is good in canada, coins come up in the very low numbers BUT have a unique sound and can tell when its a coin 1 person said the vanquish is garbage in canada and dosnt use the vanquish to coin shoot I recently bought my mom a vanquish, and I was worried it wouldnt coin shoot well On the legend 1.05, I use 20khz usually, I need to test multi and coin shooting aswell, I only just updated to 1.11 five minutes ago, but I almost never use multi
Boa noite amigo sou do Brasil Temos o mesmo problema com as moedas com núcleo de aço quase todos elas estão na faixa do ferro Estou tendo sucesso com as seguintes configurações Multe frequência 3 Sensibilidade conforme o tereno Velocidade de recuperação 6 Filtro de ferro 5 Estabilizador 3 Não eliminar as tampas de garrafa Fazer teste no ar e dentro da terra para aprender o som que a legend faz
As to the extera stuck shaft. Next time after water hunt rinse it out with fresh water straight away. You Always will have trouble after water hunting with any machine ,from silt build up in shafts
For someone who makes out to no about detectors , Why would you do a silly test like this , everyone with any knowledge about detecting knows that a freshly buried target is no different to a air test which is completely pointless, trouble with the people who watch these sorts of clips believe all they see ,and sadly most of whats on RUclips is rubbish from people who haven't been detecting that long or simply don't no what there talking about.
man!! I don't know why this channel isn't blown up to a million subs. I learn so much from you bro and I appreciate everything you do thank you
Reasons why my channel has low subs is because I do not do Facebook, Tiktok or Instagram or any other platform. I do not edit my videos or have fancy thumbnails. I do not have intros with music. I do not do shorts. I do not livestream. I do not sell merchandise. I am not sponsored. I have never had a give a way. My channel is not monetized. I do not give out links for Paystreak discount promotion codes on products. I do not graphically promote dealer's or manufacturers logos. I do not ask my viewers for money. I do not claim to be an expert. I do not try to convince my viewers that I am using the "best" detector. I do like to keep it simple. Thanks for watching and commenting Johnny.
Thanks ,I learned something today. As always good job Jeremy.
Glad to help
Thanks Jeremy
You should rototill your back yard then take a giant magnet and gather up as many nails as you can find. 😂
Just for fun..I'd like to see the Bounty Hunter on the same targets. Thanks Jim
Thanks you,Jere OP man
Great Video / I alway learn from your testing!!!
Thank you! Cheers!
Great video as always! Lots of Mineralization.
Yes! Thank you!
I've also noticed that with big coils in heavy iron contamination, if there is iron near the edges of the coils as you end or begin your swing, NOT under THEM, they will also create falsing. It seems like you have a lot of contamination at this site as well which is why you're not hitting the coin from every angle. Its similar trying to detect near the playground poles with a big coil. I did this test with a large rusty bolt about 4 inches away from the edge of my Legend coil as I swing and I couldn't hit a silver dime on the surface let alone in the ground. I never went over the bolt...........it was just beside the edge of my coil.
Thats some serious mineralization. My yard sounds about the same, but its purely from iron trash. Dropping sensitivity to 12-15 helped somewhat with the stock coil, getting a 6 inch coil made a world of a difference.
Small coils have to process less ground. When the ground is hot...small coils are way way easier to use
Love the war zones
I use big coils less than 5% off the time. Thanks
I use big coils for maybe 25 hours every year.
hello, first of all I want to thank you for your channel and the many videos posted daily, I have taken a lot of advantage when I go out with the detector.. I have the legend and I am very happy with the detector, I usually use it at 15 kw and I have had good results ..my question is why do you always use the recovery speed at maximum or almost ..in this video wouldn't you have a better result putting it at 6 or less!? Thanks.
My ground is dense clay and is mineralized. Dropping the recovery speed low does not get you deeper targets in mineralized ground. If I set the recovery speed at 6, I probably would not find much. If you are hunting in mild ground with few minerals, you can get away with lower recovery speeds.
Can you try a sovereign or excalibur . They are slow sweep . But they good in mineral soils.
I do not have those detectors.
Hi, I'm wondering your thoughts on multi frequency and steel cored coins
I heard someone say that the vanquish dosnt work well on modern canadian coins, so I asked that question in a canadian Facebook group
About 4 people said the vanquish is good in canada, coins come up in the very low numbers BUT have a unique sound and can tell when its a coin
1 person said the vanquish is garbage in canada and dosnt use the vanquish to coin shoot
I recently bought my mom a vanquish, and I was worried it wouldnt coin shoot well
On the legend 1.05, I use 20khz usually, I need to test multi and coin shooting aswell, I only just updated to 1.11 five minutes ago, but I almost never use multi
Boa noite amigo sou do Brasil
Temos o mesmo problema com as moedas com núcleo de aço quase todos elas estão na faixa do ferro
Estou tendo sucesso com as seguintes configurações
Multe frequência 3
Sensibilidade conforme o tereno
Velocidade de recuperação 6
Filtro de ferro 5
Estabilizador 3
Não eliminar as tampas de garrafa
Fazer teste no ar e dentro da terra para aprender o som que a legend faz
O som cortado pulando repetindo em alta velocidade
@Paystreak Superfreak Wow did not expect much change. What metal is the coin? If it was. a Big Silvie it wouldnt change much.
Copper, silver aluminum, gold. brass!! A coin that size is a high conductor!!. The numbers probably would not change no matter what metal it was.
Found a thimble today and a button and coins no silver today or jewelry but had fun.
Congrats on the thimble!! I did not go metal detecting today. 105 degrees today and 110 tomorrow.
@@PaystreakSuperfreak we are having a hot streak here too all triple digits this week bummer..
Se colocasse no modo ouro (prospecção), teria pegado com facilidade.
Excelente video y hallazgos, saludos cordiales desde chile 🙋♂️🇨🇱👍🗝️⛏️💍👏
As to the extera stuck shaft. Next time after water hunt rinse it out with fresh water straight away. You Always will have trouble after water hunting with any machine ,from silt build up in shafts
The shaft is clear of silt. It does that when the shaft is wet. The upper shaft has a suction because of the very tight clearance.
What version software are you running on the D2?
v1.1
@@PaystreakSuperfreak full tones is a better separator now but I get a lot of iron grunts on deep targets, keep up the good work👍
The numbers are reference anyways. It's all about that sweet repeatable beep baby..
Yes!!
Nokta legend vs Xterra pro? Whos win? 🤔
Legend for jewelry and gold...XTP for the water
@@PaystreakSuperfreak I'm walking in the forest and field
Legend all the way. Legend has much more versatile frequencies
@@PaystreakSuperfreak Is Deus 2 worse than Legend and XTP?
Get your old analog machines out and try it again ,😮 no change , who knows😊
For someone who makes out to no about detectors , Why would you do a silly test like this , everyone with any knowledge about detecting knows that a freshly buried target is no different to a air test which is completely pointless, trouble with the people who watch these sorts of clips believe all they see ,and sadly most of whats on RUclips is rubbish from people who haven't been detecting that long or simply don't no what there talking about.
After more than 30 years of metal detecting, I do not claim to have all the answers. These "silly tests" provide us with answers.
The Godfather Himself Guy’s 🫵