New version Super machine for milling and grinding. Part 1---- ruclips.net/video/O8zcOgmv2-Y/видео.html Super machine for milling and grinding. Part 2 --- ruclips.net/video/amrRSJg08Zk/видео.html
This the most simple, well designed router sled that I have seen. The simplicity is in the design. Well done. Of course everyone can improve upon your design for their specific needs. Very well done. Thank you for sharing. You have inspired me to make my own.
Also subscribe on my instagram:) - instagram.com/mr.vereshchak/ ➡️ LIKE the video and SUBSCRIBE if you enjoyed this video ! Join my Notification Squad: click the 🔔 Bell
To level with cross strings you need to lift the top one by the thickness of the string, or you will get a false level as the bottom string bends the top string by its thickness.
I could be wrong but if his table top is flat enough and no twist, he should be able to ensure all four rail corners are set at the same height. I would check with the string method to confirm before assuming this however.
Thats a terrible method, no offense. He is using levels as side rails on his sled. He simply levels one side and then uses a level going across the table on one end, then the next. Badaboom....level. Why bother using string when he has levels as sides it's a waster....also two opposing corners could be level with each other and the other opposing corners could have one high and the other low and guess what....the strings will touch. Strings can be handy in masonry or forming for concrete pours etc but not for this.
Как хорошо что нарвался на это видео так как сейчас надо под фрезер такая приблуда. Сделаю по своему, каретка текстолит, ребра жесткости (алюминий) они же для фрезера направляющие из фурнитуры для мебели. Сейчас современных профилей разных видов хоть опай ешь. За идею и видос однозначно жирный +
Thanks for taking all that time to show us how to build a beautiful sled, I know it was many hours to make, edit videos,ect. But the great reward is when your old and gray you can show the Grand kids all the things you’ve made 🙋🏻♂️
Очень ценно то, что обеспечена регулировка по высоте. С фиксированным расстоянием от фрезера до стола приходится под тонкую заготовку что-то подкладывать, и мудрить с её закреплением. Ваша конструкция избавляет от этой мороки . Лайк.
не умничай сильно, древесная пыль в принципе не вредна, дальше носа не проходит. Ну нет у человека пылесоса в гараже, во всяком случае на момент съемки. Главное, он идею рассказал за фрезер, а дальше каждый своей дорогой!
Хорошая работа. Единственное, что с универсальным угольником легче выравнивать направляющие. И можно добавить на салазки колесики, упирающиеся в бок направляющих, чтобы избегать перекосов при передвижении салазок.
This is absolutely perfect and does exactly what the description shows! it's well made and edited and great content, who could've possibly dislike it, they're not right on the head. Thanks for this video, great as always man.
J B i don’t get ads, I have RUclips premium or whatever it’s called. Ads are not controlled by the author but by RUclips I believe but I may be wrong. Good point though
@@JesusUruchurtu1 Adds are controlled by the author, and he chooses whether to monetize the videos, and to what degree. The more adds you see means the author is maximizing his monetization option, at the viewing expense of his audience. After a certain point, it gets ridicules, like this.
I 100% agree with you. Woodpecker stuff is nice, but boy are they proud of it--perfect way to unnecessarily dump a bunch of money! Luckily knockoffs of many of their tools are on aliexpress.com for much less, and we can just make the rest ;-)
Отличный стол ! спасибо! на завтра заказал фоненер 18 - буду делать что то похожее -- отличное решение -- думал о таком -- а тут раз и видео попалось!)
Great stuff great channel :) If i may? If you added stick on tape measures to the inside of each of the six pieces you adjust, They would be no need for the ruler.
This is a great idea. With the adjustable fencing, you don't need to risk extending the bit too far beyond the safe operation that is required. Less risk of the bit flying out of the router or breaking the shaft. Not over engineered with expensive slides and rails either. Mostly stuff around the shop already.
Шикарная приспособа... Судя по количеству струбцин, инструмента... Видно мастера... Спасибо... Только вопрос... Стружка под подошву фрезера не попадает?
Спасибо за совет натереть воском. Думаю, очень пригодится. Есть два вопроса. 1. Такое крепление направляющих расширяет возможности станка по толщине заготовки. Но, встаёт сразу вопрос, а с какой точностью вы выставляете параллельность рельсов столу? 2. Как крепите заготовку к столу?
this is great sled. I,m not an pro, but needed same but smaller sled for small pieces of unflated wood slices, so what to do to fix those slices, so they cant move
3 года назад
Beau travail, belle idée. Et méticuleux. Je le note...Bravo 😀
you did a really awesome job. with a leveling rule you solved leveling problem easily. what is the brand of the (wide) leveling rule you used, may i ask you?
Yes, brilliant. Builder's straight edge. I was thinking of using recovered melamine, but at about 10 quid each, the straight edge makes much more sense. I am just about to build a workbench, and I shall incorporate this. Thank you, and good thinking!
Идея великолепная, МОЛОДЦОМ! Верхние санки я бы поставил на двустороннюю опору а передвижение по алюминиевым рельсам можно на подшипниках. И механизм регулировки высоты более удобным можно сделать.... (Не судите за комментарий, это мое мнение.)
Very good video.. im a beginner and learning.. would it b possible to get the measurements for everything to build one and everything u bought for it.... that way I got a base to go off of.. thanks alot again for video...
What are the plastic wing nut heads called that you put your carriage bolts through? I’ve seen those before but can’t figure out what they’re called. Those are handy! I’d like to buy some.
![making a simple & easy Router Planing Jig [woodworking]](/img/1.gif)
New version
Super machine for milling and grinding. Part 1---- ruclips.net/video/O8zcOgmv2-Y/видео.html
Super machine for milling and grinding. Part 2 --- ruclips.net/video/amrRSJg08Zk/видео.html
This is the first time I’ve seen someone use the router to cut the hole in the router channel. Genius!
This the most simple, well designed router sled that I have seen. The simplicity is in the design. Well done. Of course everyone can improve upon your design for their specific needs. Very well done. Thank you for sharing. You have inspired me to make my own.
Thanks)))
Cheers mate, this video has given me an idea for a problem I’m having in my workshop. Much appreciated.
Also subscribe on my instagram:) - instagram.com/mr.vereshchak/
➡️ LIKE the video and SUBSCRIBE if you enjoyed this video !
Join my Notification Squad: click the 🔔 Bell
Дякую...
F
Where did you get the levels?
I did subscribe My King please do the same to my channel
!aaaa!!!!
I've seen something similar before. But this is the first I've seen someone show how to make it and not be to complicated. 🤴
To get them level, cross string lines from corner to corner and when they touch in the centre they will be equal height. Good job yeah. 👍👍👍
To level with cross strings you need to lift the top one by the thickness of the string, or you will get a false level as the bottom string bends the top string by its thickness.
Use a transit level
I could be wrong but if his table top is flat enough and no twist, he should be able to ensure all four rail corners are set at the same height. I would check with the string method to confirm before assuming this however.
Thats a terrible method, no offense. He is using levels as side rails on his sled. He simply levels one side and then uses a level going across the table on one end, then the next. Badaboom....level. Why bother using string when he has levels as sides it's a waster....also two opposing corners could be level with each other and the other opposing corners could have one high and the other low and guess what....the strings will touch. Strings can be handy in masonry or forming for concrete pours etc but not for this.
Класс !!! И бюджетно , и работает конструкция !👏👏👏👍👍👍
Это сильно !!! Ещё бы описание поподробнее , особенно стола для циркулярки. За видео огромное спасибо и, безусловно, лайк и подписка.
Спасибо))
видео стола ruclips.net/video/8r4tfG3qJn0/видео.html
Как хорошо что нарвался на это видео так как сейчас надо под фрезер такая приблуда.
Сделаю по своему, каретка текстолит, ребра жесткости (алюминий) они же для фрезера направляющие из фурнитуры для мебели. Сейчас современных профилей разных видов хоть опай ешь. За идею и видос однозначно жирный +
Thanks for taking all that time to show us how to build a beautiful sled, I know it was many hours to make, edit videos,ect. But the great reward is when your old and gray you can show the Grand kids all the things you’ve made 🙋🏻♂️
Очень ценно то, что обеспечена регулировка по высоте. С фиксированным расстоянием от фрезера до стола приходится под тонкую заготовку что-то подкладывать, и мудрить с её закреплением. Ваша конструкция избавляет от этой мороки . Лайк.
Какая хорошая идея, вместо пылесоса, разгонять компрессором пыль, по всей мастерской! Надо взять на вооружение!
не умничай сильно, древесная пыль в принципе не вредна, дальше носа не проходит. Ну нет у человека пылесоса в гараже, во всяком случае на момент съемки. Главное, он идею рассказал за фрезер, а дальше каждый своей дорогой!
@@Виктор-ч7т Умных, блять не любишь, но мне похуй1
Bravo Lucy, Melina, Salma, Kalani - ihr wart alle ganz toll!
Підписка, лайк. Саме те, що потрібно. Дивовижні і красиві ваші вироби ! Дякую за відос !
Супер. Не понимаю, как можно ставить дизлайк на такой шедевр
Спасибо)
Einwandfrei. Tolle Idee!
При больших размерах заготовки фуганок отдыхает) А так можно любую ширину отфуговать, это факт! Полезная приспособа!
Dude! This is the perfect router sled application for my shop! Thank you!
Thanks a lot 😉
Совет, линейки с внутренней части приклей - будет проще выставлять высоту.
veramente un ottima idea per un progetto versatile. Molto bravo, ti faccio i miei complimenti
Very good. my current one is fixed and a little limited. Time to upgrade. Thank you
Хорошая работа. Единственное, что с универсальным угольником легче выравнивать направляющие. И можно добавить на салазки колесики, упирающиеся в бок направляющих, чтобы избегать перекосов при передвижении салазок.
I love this idea it has been in my mined for the last week to build a table with adjustable sides just for this type of work great job.
Хорошая, кропотливая работа...перфекционист однако.
ruclips.net/video/O8zcOgmv2-Y/видео.htmlsi=O0SnBNrCGlq8-oKb
This is absolutely perfect and does exactly what the description shows! it's well made and edited and great content, who could've possibly dislike it, they're not right on the head. Thanks for this video, great as always man.
I enjoyed the video as well but man, that was a lot of commercials for a 17 minute video. That could have contributed to the dislikes.
J B i don’t get ads, I have RUclips premium or whatever it’s called. Ads are not controlled by the author but by RUclips I believe but I may be wrong. Good point though
Thank you 😊)
@@JesusUruchurtu1 Adds are controlled by the author, and he chooses whether to monetize the videos, and to what degree. The more adds you see means the author is maximizing his monetization option, at the viewing expense of his audience. After a certain point, it gets ridicules, like this.
Woodpecker just announced one for $1000.00. Been thinking about building one and this is a classic case of K.I.S.S. Great job, well done.
Thanks)
I 100% agree with you. Woodpecker stuff is nice, but boy are they proud of it--perfect way to unnecessarily dump a bunch of money! Luckily knockoffs of many of their tools are on aliexpress.com for much less, and we can just make the rest ;-)
@@drewt3210 бььь тттттттттиииии
Отличный стол ! спасибо! на завтра заказал фоненер 18 - буду делать что то похожее -- отличное решение -- думал о таком -- а тут раз и видео попалось!)
Спасибо!)
Great stuff great channel :) If i may? If you added stick on tape measures to the inside of each of the six pieces you adjust, They would be no need for the ruler.
Молодец мужик!
Great table! I really like the adj. sides thank you for sharing.
Супер.
Молодец мужик
Комментарий в поддержку канала и ролика, а также труда мастера.
Спасибо дружище, за хорошее видео. Лак и однозначно подписка. Всем добра.
Спасибо)))
Mr.Vereshchak ты наверное с Западной Украины ?)
This is completely awesome!
Well done!!! The guy has good hands! (Молодец!!! У парня хорошие руки!)
Спасибо! 😉
Круто, благодарю. Навёл на мысль,как сделать прикладу для своей работы. А по краям можно закрепить линейки ещё и сразу по ним выставлять правила.
One of the best router jig systems i have so far seen, but i would not be blowing all that dust around my workshop with a blower!
Excellent technic, it will inspire me. many thanks for sharing it. Greetings from Geneva.
Tolle Idee. Gutes Video.
Супер!!!!! Спасибо большое буду делать как у вас удачи коллега
This is a great idea. With the adjustable fencing, you don't need to risk extending the bit too far beyond the safe operation that is required. Less risk of the bit flying out of the router or breaking the shaft. Not over engineered with expensive slides and rails either. Mostly stuff around the shop already.
Can you drop a link for the rails you used please? Love this design
Muy bien!!!!!! Gracias desde TORREMOLINOS (Málaga) ESPAÑA
Шикарная приспособа... Судя по количеству струбцин, инструмента... Видно мастера... Спасибо...
Только вопрос... Стружка под подошву фрезера не попадает?
Спасибо за идею. Просто супер!!!
What a great sled, perfect video 👍
Thanks ☺️
Спасибо за совет натереть воском. Думаю, очень пригодится.
Есть два вопроса.
1. Такое крепление направляющих расширяет возможности станка по толщине заготовки. Но, встаёт сразу вопрос, а с какой точностью вы выставляете параллельность рельсов столу?
2. Как крепите заготовку к столу?
Самое актуальное что я видел. Просто и удобно, спасибо!
well done. best I have seen, thanks!
Nice workbench.
Thanks)
Great job mate simple but effective what are those aluminium straight edges called I could think of 1000 reasons why I need those in the workshop
عمل رايع تشكر على الفيديو
You have the dopest set up with the out feed table / slab bench. I want it.
this is great sled. I,m not an pro, but needed same but smaller sled for small pieces of unflated wood slices, so what to do to fix those slices, so they cant move
Beau travail, belle idée. Et méticuleux. Je le note...Bravo 😀
merci)))
Nice, something useful on the RUclips
Ik had het graag in het Nederlands. Dank je wel
Спасибо, интересное видео 👍
Love the videos keep up the great work. What are you using for the rails?
Very good! Confratulations! It´s a great tool.
Cool vid! Thanks for the help, this looks kinda perfect for me :)
Very neat.
Thanks
Красавчик👍👍👍👍
Excelente,para minhas necessidades farei pequenas modificações,um ótimo trabalho, obrigado por compartilhar seu conhecimento.RGS.🇧🇷
Thanks))
Great Job !
you did a really awesome job. with a leveling rule you solved leveling problem easily. what is the brand of the (wide) leveling rule you used, may i ask you?
very good ......Superman..ๆๆๆๆๆ
Yes, brilliant. Builder's straight edge. I was thinking of using recovered melamine, but at about 10 quid each, the straight edge makes much more sense. I am just about to build a workbench, and I shall incorporate this. Thank you, and good thinking!
руки от куда надо растут!
лайк.
Спасибо!
This is one of the best flattening sled designs I've seen. Thank you for sharing!
I am glad to hear it. it's important to me 😊
@@mr.vereshchak Thank you for this video bro, what are the dimensions please?
Nice vid. Thanks.
Спасибо!За информацию)
Подскажите пожалуйста, фреза какого бренда используется для выравнивания спила на видео?
Nice project. Thanks for sharing. Thumbs up! But I can imagine there are more simple ways to make an adjustable router sled.
Идея великолепная, МОЛОДЦОМ! Верхние санки я бы поставил на двустороннюю опору а передвижение по алюминиевым рельсам можно на подшипниках. И механизм регулировки высоты более удобным можно сделать.... (Не судите за комментарий, это мое мнение.)
Respekt odlicno
You are the best. I like your videos. 😊💪
Thanks)
Love the design. What is the brand of those metal rails that sit in the adjustable height custom pieces you made?
Very good video.. im a beginner and learning.. would it b possible to get the measurements for everything to build one and everything u bought for it.... that way I got a base to go off of.. thanks alot again for video...
Инопланетный рейсмус... респект и подписка без комментариев
Спасибо)))
What are the plastic wing nut heads called that you put your carriage bolts through? I’ve seen those before but can’t figure out what they’re called. Those are handy! I’d like to buy some.
This is a really good sled
😊
c'est super je vais la fabriquer merci
merci)
what router bit should i use to flatten a round slab like in your video?
Very nice video Mr V.
Thanks)
Eine gute Idee, voll Genial das ganze.
Крутая приспособа! возьму на заметку!!! Подскажите,пжл,как называются направляющие matrix? Ссылку на магазин не дадите?
you know your stuff lad fair play 100%
Хорошая работа
Спасибо)))
Good Idea , good Work.
Great job! But I still think that electric hand planer and jig for it is better option than the router!
hi
thx for this amazing video.
which cutting bit are you using?
thank you very much
Frickin brilliant bro, you got mad skills
Hey very nice video @Mr.Vereshchak can you show us how you modified your saw table to the state it is in now?
Здравствуйте. Какое впечатление сложилось о красной маките? Так ли необходима регулировка оборотов на фрезере?
Классно, СПАСИБО! Творческих успехов, удачи!
Спасибо!)
Prepare yourself a L shaped jigs with various lengths, so you can set the height easier than measuring.
Thanks for the vid.
Thanks for the idea )))))
Я бы на стойках снизу сделал болты, которые поднимали бы планку, так и точнее и удобнее регулировать )
Excelente projeto, vou tentar fazer.