How to Make a Waterslide Image | Adding Decals to your Tumblers and Crafts
HTML-код
- Опубликовано: 24 авг 2024
- Watch How to Make a Waterslide Image step by step. I will show you where to find an image, supplies you need, and exactly how to print your waterslide image. I'll also walk you through how to add a waterslide image to your tumblers!
*I forgot to mention* Use clear waterslides on LIGHT SURFACES! Light glitters & paints or you wont be able to see it!!
//SUBSCRIBE: Click here to subscribe: / alisoncrafts
//WATCH NEXT!
Sealing your Waterslide Decals: • How to Seal a Watersli...
Best Glitter Method: • How to Apply Glitter u...
Full Wrap Waterslide Decal: • Easiest Way to Make a ...
I participate in various affiliate programs. Some links that I share may provide me a small commission if you make a purchase. This is at zero cost to you. I only recommend products I use personally!
//MAKE THIS YOURSELF:
Waterslide Paper: amzn.to/2M0nF4Y
Silicone Brush: amzn.to/2XMelob
Clear Spray Paint (Check local hardware store): amzn.to/3bP60bs
Plastidip Glossifier (check local hardware store): amzn.to/3sy7psT
The Hungry Jpeg: shareasale.com...
Creative Fabrica: www.creativefa...
MOTHER TUMBLER (use code alison5): mothertumbler.com?sca_ref=983865.BNCKc5zQ5i
--------------------
Making Tumblers, keychains, pop sockets, and Starbucks cups are some of my favorite crafts! If you're interested in learning more and exactly how to make them yourself, you're in the right place!
Crystalac Introduction Series: • Playlist
Tumbler Basics: • Beginner Tumbler Tutor...
Keychain and Acrylic Blank Tutorials: • Epoxy Free Keychain Tu...
All tumbler tutorials: • Playlist
Silhouette Basics:
-------------------
//SHOP TOOLS: craftingthegoo...
------------------
//LET'S CONNECT!
Insta: Alison.crafts_
Blog: www.craftingthegoodlife.com
RUclips: / alisoncrafts
TikTok: vm.tiktok.com/...
-----------------
I get 99% of all my images from Creative Fabrica! Use this link to get your first month FREE: www.creativefabrica.com/promo/5305/0p350-FGHIJKLMNO/ref/455608
Thank you, this is exactly what I was looking for. The way you break down every step it makes it so easy to follow along and not get confused.
It’s great to see your lives again !!!!🎉. He may have a dresses and I missed it when I was writing down the instructions that when printing waterslides say are we to mirror the image or no?
Thank you for the breakdown on how to print and make a waterslide. I'm not going to use brighttone though because I have a different method of doing it but this was helpful!!
I'll probably have to watch some other videos too bc this one was helpful but also missed a lot of details. I'm not sure exactly what bright tone is. I was unaware this would take days. I figured a couple of hours then dry time.
Hello Allison, good to meet you. Thank you for your awesome tutorial. I appreciate you.
THank you
Thank you sooo much for this video!! You saved me from going crazy!! I could not figure out how I was going to print the right size image onto the water slide!! You are a blessing 🙏🏻
So glad it helped!
Thank you so much, I needed to see this.
I learned so much thank you so much!!
Great video. Thanks for sharing. 💕
I love this teacher tumbler! Would you be able to make a tutorial on this tumbler?
I love how simple your tutorial is. TFS.
Can the decals be applied to any smooth surfaces, or it is things like mugs only?
What kind of printer is recommend? Can we use the same as sublimation?
I have an inkjet printer! I’m loving it too.
Thank you!!!! I was struggling with this.
I'm new to your Channel I have watched so many this morning ...I'm so thankful I found your channel. I LOVE how easy your tutorials are to follow.
I'm so glad you're here!!!
Love this video. Thanks for sharing. What brand of epoxy do you prefer? Thx. 💕
I actually don’t use epoxy, I use crystalac grande finale! thecrystalacstore.com/products/grande-finale-fast-dry-tumbler-coat?_pos=1&_psq=grand&_ss=e&_v=1.0&sca_ref=301559.RjXXsfrXmN
Thank you so very much! This has been so helpful
Did you make your own cup holder..?
If you want to add a waterslide to an acrylic blank, I know you have to seal and wait 48 hours before using Brite Tone, but how would you prep the blank when using on the non-glittered slide?
Light scuff sand with 400 grit sand paper and do 3 coats of BT before the waterslide!
Can you use bottle craft clear varnish
I love that glitter you used 😍🥰 What are the color glitters you used?
Would this be the same process if I use Grand Finale?
Thank you for this video! I was wondering, what is the process of sealing the waterslide if I'm not going to be putting a base color? Like just a plain stainless steel tumbler. I just want to put the image on and seal it.
Honestly you’re amazing! Thank you. I definitely subscribed
Thank you :)
I'm not going to use them on tumblers. What is bright tone?
Does it matter white vs clear waterslide? BTW I love this tutorial! You inspired me to make my own
it does matter! Here is the differencE: ruclips.net/video/RJz8YXmJVYc/видео.html
BRAVO!! Just what I needed! 😊
yay glad you found me!!
So the brite tone seals it that’s all I’ll need ?
can you use modge podge sealer spray ?
im looking to create my own words to make custom tumblers for the bar i make shirts for can you tell me an app that i can do this with please.
When printing do you turn bleed on or off
Can you buy decals I don't have a printer
I follow you on TikTok
I know this is an older video, but how do you make a see through decal? Like, I’m trying to make a Dr Pepper decal but it has the maroon color already there and I want the glitter to show through it to make the maroon color not the already maroon color with the logo. Not sure if that make sense lol
What is the model of your printer
Can I add a water slide to powder coated tumbler or do I have to sand it first? Also do I have to sand the whole tumbler to cover it in epoxy? I’m not adding glitter just a water slide but my husband wants it to be epoxied so the image doesn’t get messed up he works in construction.
So the clear layer that forms over the image on the cup isn’t supposed to peel off 🫤
the clear portion is the actual waterslide paper, that's what you transfer to your cup
thanks for making this understanable🥰
you're welcome!
So if you use a laser printer you don’t have to seal the decal with the clear coat/plastic coat?
I love these tutorials ! I am definitely subscribing. Where did you purchase the confetti looking glitter?
Thank yoU! Sass and Crafts!
Thank you for the video! Can I ask what glitter you used? What Colors?
And do you still use bright tone instead epoxy?
Hello Allison, just found your channel; love it thanks for sharing your vast knowledge. Question for you, what glitter did you use for the bottom of the tumbler, I love the colors. Thanks in advance.
Graffiti Dots from Sass and Crafts!
Can you print a water slide with a sublimation file?
Hello Alison thank you for ALL your great videos! I want to start making tumblers, in your opinion which is easier waterslide or sublimination?
definitely waterslide...sublimation requires a special printer and special ink. and a special coated tumbler :)
@@AlisonCrafts Thank you! 😊
Awesome ❤❤❤❤
Thanks!
@@AlisonCrafts ❤❤❤❤❤
What Microsoft word you using
Hello Ms. Alison, I'm late but I'm here for this lol. Love the tutorial and easy to understand instructions... Question, could I use epoxy over a waterslide decal?!
Yes of course!
Thank you so much for this video! I have been looking EVERYWHERE on RUclips for a video EXACTLY like this one. My only question is how did you put the name in the middle? I’ll be using an inkjet and Microsoft word.
I typed it in before i printed the decal!!
Its a wonderful .. can i make it without acrylic?
if you're using an inkjet printer you have to seal your images. If you have a laser printer you don't
Do I need a special ink for the paper? or can I use the regular ink that comes with the printer?
you can use regular ink!
I use laser waterslide. Once he’s on my tumbler, do I have to seal it before BT? If yes, how long should I wait before sealing with clear gloss spray. Thank you, I love your videos
you don't need to seal at all with laser waterslides! just make sure you let it dry overnight before BT
@@AlisonCrafts thank you, you are so helpful.
Love your videos. Can you please make one on printable vinyl on tumblers.
sure can!
@@AlisonCrafts thank you! 😊 do you have a link of where you get your tumblers?
So if I’m using epoxy, is the brite tone still necessary?
For clay produ
Is the bright tone like epoxy?
It's a non toxic alternative. Just a safe option to use instead!
so helpful!!!
I'm so glad!
Hi, I love this tutorial. Quick question, what Bright Tone do you use? I’m new to this and your videos are so helpful. Thank you for sharing.
This is the link! YOu want to choose GLOSS thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN
I have problems with the water slide cracking or tearing. Did you say let it dry before epoxy?
definitely let it dry really well! also try using this method to seal: ruclips.net/video/54EIVCe1taU/видео.html
You rock I’m going to water slide an image onto my bikes fuel tank
that's so cool!
Do i need to mirror this?
it depends on how you apply. the way i do it in this video you do not need to mirror
If you put glitter do you put a thin layer on epoxy before doing the wat waterslide?
You want it to be fully smooth before adding waterslides
Hi does anyone know the equivalent to brightone in the uk ??
What inkjet printer do you use?
I have an office jet printer. Idk what would be the best paper to get to make water slides 😭
honestly any printer will work!
Me encanta!!!! que brocha es esa?
Gracias! It's a Taklon Brush amzn.to/2LE6sPh
If I wanted to add a water slide to a basic non decorated cup that isn’t sanded do I still need to add that liquid you mentioned at the end?
if you're doing ceramic you should probably bake it to make it more permanent. if it's a different kind of cup you'll want some protection so it doesn't crack or scratch over time.
You can link your bright tone that you use? Also if you don’t mind me asking what laptop do you use? I use a Mac and a HP laser printer and it doesn’t come out that bright.
I would look into how to can adjust your printer settings, you could probably make some adjustments to make them look a little better! Here is the link to Brite Tone: thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN
What is bright tone?
Not sure you will reply since it's been so long since this was posted. But can you use a laser printer for waterslide?
yes absolutely!!
what printer do you use and ink ?
Is this the same process for using Amazing Clear Cast Resin? (I'm assuming so🤷♀️), and thank you so much for your videos!! They are great!
Also, could I use Triple Thick Clear Glaze and Plasti Dip multi purpose flexible coating?
Yes the process is the same for resin!! And I think triple thick will work... I'm 99% sure any clear spray will do!
How do you know when to use clear water slide paper or the white water slide paper?
so white waterslide has a white back ground, so you may want to use it on a dark background. You'll also want to cut it with your cutting machine so you can get as close to the image as possible! Here is a side by side: ruclips.net/video/RJz8YXmJVYc/видео.html
do you use sublimation ink for waterslide decals? I added sublimation ink to my inject printer instead of the in that comes with, but colors are faded.
No regular ink! Sublimation only for sublimation projects
Wow! Beautiful instructions 😝 I think I’m ready 😁🤓 can I ask what did use for crayon? ☺️
you got this!! I use this: www.creativefabrica.com/product/crayon-split-monogram-svgback-to-school/ref/455608/
@@AlisonCrafts thank you 😊 what font is that?
@@nhaydeehdz03 farmhouse lemonade!
So the same water slide paper you put In A printer I can use with my Cricut?
Yep!
If my water slide has already gassed off for 48 hours before adding it to my tumbler how long do I need to wait before adding BT
overnight to make sure it's dry
Thanks so much for your video! I'm making waterslide's for nails and I'm having trouble with my decal being translucent. I used clear paper, printed my images, sprayed 3-4 layers of clear spray paint. When I soak the image (15secs) it's pretty translucent. Can anyone give me some feedback on how to fix this?
Yes, the clear waterslide is translucent but should show up pretty well on a light/white background. You can use white waterslide though!
@@AlisonCrafts Thank you! Mine were almost completely transparent on a yellow nail. I’ll keep trying & look into white waterslide paper 🙂
Do you not use epoxy? Do you use that finishing liquid instead?
don't use epoxy, I use CrystaLac Brite Tone!
How tiny of an image have you done?
Are you using bright tone instead of epoxy?
Yes i am!
Do you use sublimation ink to print it?
I was searching the comments for this exact question… did you figure it out?
What kind of brush is that you are using to brush the Brite tone on
I use a taklon brush! amzn.to/2LE6sPh
Hi, do you mirror this if you’re using Cricut ?
you don't have to mirror waterslides but some people like to apply them that way
If you only printing a small image, can you use the same waterslide sheet for for future projects? Hope my question make sense
So i've done it where i use like the top 3 inches (or whatever size) and then turn the page around so the side i didn't use can still feed into the printer. Does that make sense?
@@AlisonCrafts so you cut out your image before you seal or do you spray the whole sheet?
@@naturallycyn I cut off the tip where the design is before I seal. Definitely don't seal the whole page if you still want to print on it!
@@AlisonCrafts thanks...I was always hesitant thinking I would waste a full sheet
Can I use tint printer? 🙏🏼❤
I'm sorry, I'm not sure what that is
Hi. Thanks so much for your videos. This is my first time trying this so I'm starting simple. I purchased 16-oz insulated double-wall tumblers (BPA Free Acrylic materials) for a family vacation. I am using my laser jet printer to print on clear waterslide paper. I'm not doing anything else to these clear cups besides these waterslide designs. Should I wash these and dry as you suggested, then follow your instructions with the Brite Tone before and after placing the waterslides? Of course I would wait the appropriate time. I was a little confused about the sandpaper. But I guess that would only be done if your were painting, glittering, or another type of decorating. I feel like if I sand the tumbler, then it will look scratched. Is this correct, or does the Brite Tone make it look smoother? Thanks for your help.
scuff sand the acrylic with the 400 grit sand paper, then do a few coats of brite tone. Then you can add your waterslide & follow that up with a few more coats!
Thank you! One more question. After applying the waterslide onto the tumbler, you said to dry for 24 hours before applying Brite Tone. Is this for both Laser Jet and Ink Jet printers?
Nevermind. I looked through your comments, and you had already answered my questions. Thank you!
Can we do these steps on clear glass?
yes!
Help when I squeegee the water it leaks the paint
Did you seal your images with spray paint?
What is bright tone. Is that epoxy? Im new to tumblers. TFS.
Brite tone is a non toxic epoxy alternative!
@@AlisonCrafts ohhhh. Thank you. Thats great. Have a wonderful day. ❤️🇨🇦
Is hp deskjet a good brand
I don't know much about it...i'd check reviews on amazon!
What kind of paper for inkjet?
amzn.to/3edWa2u
Can I use crystalac on stoneware mugs?
Do I have to sand it ?
You know, i'm not 100% sure on that. I'll ask around :)
@@AlisonCrafts thank you so much 💕
What printer do you use?
I have an old epson. Any printer will work!
What if I don’t use bright tone? I use UV resin is it the same steps?
Yep!
@@AlisonCrafts also do I have to seal my image if I am using printable sticker paper using an inkjet printer? I know I do for water slides, was curious about printable vinyl and sticker paper
@@amandabomboy2244 it really depends on the brand of sticker paper. Best to test a little bit and see!
@@AlisonCrafts thank you so much.
@@AlisonCrafts also will any sealer work?
Can you upload the image into design space?
yes!
Will it have color if I upload it onto design space?
Is there anyway to make glow in the dark tumbler ? I know you can add the pigment powder to epoxy but how would it work for Crystalac ? Also can you use acrylic paint to splatter on the cup ? Love watching your videos !
yes you can do both of those things! You can mix glow powder into BT and do a few coats of it!
@@AlisonCrafts thanks so much for the reply !
EVERY time I use my laser printer to print a decal, it runs or bleeds. I can't figure it out for the life of me. What is the secret?!? I bought this new laser printer just for decals. I used the highest quality settings. I'm super frustrated.
Is your paper made specifically for laser printers?
@@AlisonCrafts Yes! I believe all settings are correct. There might be an issue with the mechanics. There is a dragging line in the center of the paper when I print. It almost looks like an embossing.
What kind of printer do you use?
I just use a basic Epson printer
@@AlisonCrafts ok so it doesn’t need to be a fancy inkjet printer?
@@daniellebudick9485 nope! Anything will work