So you made both a motor and a generator from this by modifying the stator, very ingenious, I can't wait to get some stuff myself and start experimenting
@@EnterTheRealm found 2 fridges on the street, took the compressors, can't wait to find a washing machine, as soon as I get home and get things running I'll definitely contact you, thank you brother 🙏
Thats awesome bro. Im thinking about changing the way im going to do things so if you have any good ideas let me know also. Going to to attempt to power the motor three phase as originally designed for to turn an alternator.
i,m sorry but your picture quality is almost unwatchable,i,m trying to make chicken plucker from l.g.hyperdrive washing machine motor but cannot get motor to spin. i do not have a clue how to wire it through the power filter capacitor.please help torquay dave
Really appreciate your reply, I just noticed I will need a controller, please can you let me the right controller to get? Thanks a million for all your assistances?
Hi there, My main problem is knowing how to connect it to the variac, if it's alright with you, can you send me instructions how to do it, will really appreciate it, thanks
You would need to rectify the power with a bridge rectifer and some big dc caps. Then positive goes too one side of the power coil. And the negative goes to the emitter of the transistor.
@@EnterTheRealm ah right, not an electrician but dont you need a return wire to make a loop to make use of the 1 terminal of 3 ? got any diagram of your wiring you wouldnt mind sharing?
If you follow Patrick Kelly (free energy/overunity researcher) you will find a video out of many that hes posted on RUclips , about the arduino 3phase motor controller. Very convincing and interesting to note that gerard morin states in one his last videos, demonstrating the 6 inch hyper drive, that the custom controller he was using had an output of 400 volts....this arduino controller has the same 400 voltput, and the same tremendous performance ......it's a project worth looking into, there's a connection there.
Question, are those position sensors rated at 15 volts? Or 10 to 15 volts? I don't have a wii AC adapter, but I have a 12 volt adapter, will install work?
@@novalight8325 thanks bro will check it out. Atm there is no limit to voltage i can run my controller other than the limits of the components used. So far wich is 1200v . Ive only ever run it at 260v however. Would be insane to go any higher. Which i plan to do haha.
@@EnterTheRealm where are you putting the input onto the motor and where you taking the output reading from? they only have 3 terminals on the motor and hall sensor dont they?
The last guy done this fell off the face of the earth. I hope to see more.
Lol. I think hes still alive and well.
Super 💥 Experimente 💥💥💥
So you made both a motor and a generator from this by modifying the stator, very ingenious, I can't wait to get some stuff myself and start experimenting
Im glad you like it. If you need any help let me know.
@@EnterTheRealm found 2 fridges on the street, took the compressors, can't wait to find a washing machine, as soon as I get home and get things running I'll definitely contact you, thank you brother 🙏
Thats awesome bro. Im thinking about changing the way im going to do things so if you have any good ideas let me know also. Going to to attempt to power the motor three phase as originally designed for to turn an alternator.
Hard to figure out what you were doing but, glad to see you'er doing OK bro
I was just playing around been awhile since i done a video. Like wise bro :).
Have u placed it under much load yet, camera lens wet or satelite feed poor?
Terrible reception haha
From the radio tower on the ground, I live next to big chunk of copper. So doesnt help
@@EnterTheRealm Im sorry my badd, entered live feed and it was great. Thanks for all u do.
@@richardbecker4193I appreciate the kind words, thank you sir. There's more to come alot more.
Ich habe keine Ahnung was das überhaupt ist ? Kann man einen Laien aufklären ?
i,m sorry but your picture quality is almost unwatchable,i,m trying to make chicken plucker from l.g.hyperdrive washing machine motor but cannot get motor to spin. i do not have a clue how to wire it through the power filter capacitor.please help torquay dave
Love it
Thank you. 😊
Good morning, This Thomas D, I could not post anything or words on the group, do you know why?
Im unsure as to why my friend. Did you verify your email with telegram as its nothing to do with ETR Admin.
Really appreciate your reply, I just noticed I will need a controller, please can you let me the right controller to get? Thanks a million for all your assistances?
Honestly it depends on what you want to do. Im just experimenting with this motor. What is i you want to acheive with it.
@@EnterTheRealm Am trying to use the brushless motor to turn a 10kva alternator head.
If you want to get involved you can reach.me EnterTheRealm
t.me/EnterTheRealm
Sweet please join here EnterTheRealm
t.me/EnterTheRealm
Do you now of Gerard Amorim?
Morin
Yes
Yes
Yeah
Hi there,
My main problem is knowing how to connect it to the variac, if it's alright with you, can you send me instructions how to do it, will really appreciate it, thanks
You would need to rectify the power with a bridge rectifer and some big dc caps. Then positive goes too one side of the power coil. And the negative goes to the emitter of the transistor.
are you powering all 3 connections as 3 phase?
No. Only one phase is used to turn the rotor.
@@EnterTheRealm ah right, not an electrician but dont you need a return wire to make a loop to make use of the 1 terminal of 3 ? got any diagram of your wiring you wouldnt mind sharing?
Of course its in my video how its done part 1. I have separated the 3 phase one for tunring and 2 for generator purposes
Please how do you use one phase to turn the rotor?
@@babad7677 please watch how its done video for explanation. Hope that helps.
Greetings! I believe I know what Gerard Mori. Was using for his motor controller.....
Hey :) Yeah i think hes using a speed boat esc. Could be wrong howver inprefer my own controller.
If you follow Patrick Kelly (free energy/overunity researcher) you will find a video out of many that hes posted on RUclips , about the arduino 3phase motor controller. Very convincing and interesting to note that gerard morin states in one his last videos, demonstrating the 6 inch hyper drive, that the custom controller he was using had an output of 400 volts....this arduino controller has the same 400 voltput, and the same tremendous performance ......it's a project worth looking into, there's a connection there.
Question, are those position sensors rated at 15 volts? Or 10 to 15 volts? I don't have a wii AC adapter, but I have a 12 volt adapter, will install work?
@@novalight8325 thanks bro will check it out. Atm there is no limit to voltage i can run my controller other than the limits of the components used. So far wich is 1200v . Ive only ever run it at 260v however. Would be insane to go any higher. Which i plan to do haha.
@@novalight8325 those sensors are rated for 20v i believe maybe slightly more.
what you using to control the speed and motor position
Speed is controlled by input voltage. Rotation depends on polartiy. Switching is doen with a halll sensor and mosfet.
@@EnterTheRealm i have 2 of these motors but not got around to doing anything with them yet
You should use one to turn the other.
@@EnterTheRealm yeah i had that in mind when i bought them tbh, where did you get that variac from?
@@EnterTheRealm where are you putting the input onto the motor and where you taking the output reading from? they only have 3 terminals on the motor and hall sensor dont they?
You mean direct drive
Yeah
Do you have enth
Do ii have ŵhat?
Cómo funciona
es un circuito oscilador. las bobinas oscilan y los imanes se sincronizan
Buy a good camera 😅
It was the connection