USB Trimmer || How to convert a Philips trimmer into a USB powered trimmer || DIY innovation
HTML-код
- Опубликовано: 22 авг 2024
- We had a 10 year old Phillips Trimmer, it's battery was dead. So we thought of recycling the trimmer by converting it into a USB powered trimmer.
We used to put the Trimmer on charging for hours, by enabling the trimmer with USB power has reduced that effort & one can use it anywhere without any hassle
The DIY is about how to convert a Philips trimmer into a USB powered trimmer. The material used in the DIY is given below-
1) Philips trimmer
2) USB cable
3) USB power bank
4) Drill machine
5) Spudger kit
6) Lead wire
7) Soldering machine
8) Wire Stripper
9 ) Scissors
You can refer below Amazon links for the material used for DIY-
1) USB cable -amzn.to/30XYDsj
2) USB power bank -amzn.to/3iAH33I
3) Drill machine - amzn.to/2Y2n71M
amzn.to/2FhMCpd
4) Spudger kit- amzn.to/3fVI5Wl
5) Lead wire - amzn.to/3iV0moH
6) Soldering machine -amzn.to/2Q0POHP /
amzn.to/31VYBjY
7) Wire Stripper -amzn.to/3aqu4yE
#howto #homeandall #homenll #home&all #USB #USBtrimmer #Philips #PhilipsTrimmer #Trimmer #howtoconvert #Trimmerbatteryissue
#trimmerbatteryreplacement #DIYtrimmer #DIYUSBtrimmer #Innovation #Idea #BestDIY
Great job mate
5volt dc should be stepped down to 1.5volt.
1.2 volt
Better you connect IN4007 diode in positive terminal. So it will work decent.
@vikasazad08 Thank you
Can we connect it directly to a charger
Better you connect IN4007 diode in positive terminal to control uncontrollable speed into decent speed.
i used 4 diodes of in4007 on series its working on low speed than before but still its fast and if i use the 5th diode then the speed becomes too low .
also the diodes are heating if the trimmer blade is being slowed by touching. is there any solution for heating???
Hie brother Motor bs jhatke leri hai on nai hori plsss help
I tried this method but working slowly and stuck again and again solve pls
wow...great....Thanks
Trimmer work too fast with loud noise how to control it
You can try using 1/2/3 diodes in series as per speed requirement, this will reduce speed and noise of the trimmer.
Can we connect original trimmer charger at the Terminals
Power bank output jada he to aapne kese
Adjust key he Power bank ka output jada he lagba 5 Volt to aapne use 1.5 Volt me kese convert keya jara bata dege pl
You can try using 1/2/3 diodes in series as per speed requirement, this will reduce speed of the trimmer.
4.6 out put volt hota battery trimmer kai uper or 70 mah supply in normal power bank 1.5 supply hote hai and 5 volt lekha hota hai so no problem 😉 and AK resistance use kar sakto. Ho
@@homeandallofficial make a video of this too
@@reviewerbibhuti5100 Thank you
Speed bhot jyada hai
Will this destroy the dynamo since its 5V? The battery is just 1.2V
Exactly. Don't try this yourself. Rechargeable battery is easily available in the market. Just replace it. You will need 1.2v 750mAh NiMh AAA battery.
All fake..
@@avijeetkumar1585
Nimh means?
Is this specific kind for trimmers?
Nichal megnisium battery 🔋
@@Nitesh.559 Thanks bro
Is trimmer ka charger mil jayega