"Dont go for more than 10 seconds". My personal favorite is to keep the key turned until you smell something burning then ask the boss if I actually need to be at work that day.
As it is written.... Romans 14:13 Let us not therefore judge one another anymore: but judge this rather, that no man put a stumblingblock or an occasion to fall in his brothers way.
my favorite method to tame a runaway diesel is to dump Co2 fire extinguisher into the air inlet pipe, that way later, if there's a fire you're really fucked...
I’ve been told a side benefit to unleashing the fire extinguisher contents into a runaway diesel intake is that it works great as a upper cylinder and valve cleaner as well.
pants with knee pads are good, right up until you forget that you are not wearnig them, on a small stone huge rock gravel or concreat floor, that innstant flash in ur head as ur knee touches floor. and then the screams started
@@scottsimpson8902 i'm not 100% sure. I think it might be 2001: Space Odyssey "Hello Dave, Hello HAL" because there is to much computer in the tractors these days.
Dewclaw has some good advice, "As long as you know it's the wrong decision that you're making, cuz then it's almost like you're making the right decision." Its like you're channeling the spirit of Ricky LaFleur of the Trailer Park Boy's. Life advice to die by.
I think the government got the last laugh on this one... Technically they bought the thing with your money then, they got you to buy it back while also taxing you again.... again..
I've grown to love your content so much, that I hope to never see your face. The idea of the person we've grown to love can never add up to any of our faces, combined.
Remember to put oil in it. Our competitor didn't and during a power outage they reported that their generators were running and more diesel was being delivered, shortly before going completely dark. Turns out, they never ran their generator tests long enough to discover that there was no engine oil in them.
If so, you'd hope he's house broken. Can't let my kids watch these videos the wife says. We're still in pain from laughing long and hard on fixing the kitchen plumbing.
I see your diesel and raise you a 1940s era incandescent bulb. I use on plugged directly into a wall socket on my bench, it's a dim as a candle, as hot as a star.
0:22 21st Century technology: computers, high power internal combustion engines, hydraulic systems, cargo helicopters, high tensile steel, ...the lighting itself is under our control, herded through wires and caged in batteries..... And yet, we still can’t beat the ancient Egyptian magic of......a bunch of rolling logs...
I have moved so many heavy things in my shop alone with a bunch of round tube on the floor, I saw it one time on a history channel doc about how they used to build stuff. Burnt into my memory
It's in cases like these I like to applaud from a distance, as to not catch anything. Such as "on fire" or "a sleeve on a drive axle". I'll come closer in a minute. Good job!
Block heater is hosed backwards. It works through thermosyphon. Bottom radiator hose T delivers cold coolant to the bottom of the block heater, hot coolant bubbles out the top to the engine.
When you have air in the fuel line of a diesel, cover the air intake while cranking the engine. This creates vacuum and sucks the air bubbles through. Then it fires right up.
As a Norwegian, I often find the Americans kind of delicate, - no swearing on TV. No nippels. No nothing. And in comes AvE and saves the day again. Super funny 👍 Thanks 😘
had some real fun this fall after a piston change on the ol john deere inline 6. disconnected the sediment bulb to prevent someone from trying to start the turd hauler and completely forgot about it once ready to start. thought there was air in the lines so we cracked the injectors to bleed only to entirely fill the system with air. a fun 3 hour bleed of the whole thing was just what the doctor prescribed.
I just watched a Zip Ties and Bias Plys vidya today. If I didn't know better, I'd say it's the same fella with an education he's pissed he paid for, just as a before and after. You guys are great
Holy hell that Nepros NWM-250 adjustable wrench looks amazing. I paused the video and went frame by frame to get the make and model. I knew it was one of your Japanese fancy tools. $80+ for one of them shiny dealies though. Too rich for my peasant blood right now. Excited to see this thing finally chooch. Hope it lives forever.
5:24 I've pumped that exact primer on enough engines that I could tell by the sound and the motion that you were nowhere near there yet. The new black primers are supposed to leak less.
Never underestimate the dangers of a runaway diesel engine. While I haven't witnessed this directly, I have been witness to the aftermath. 'twas on a (very new) fishing boat and the engine was connected to a three phase alternator that supplied almost all of the AC requirements on the boat. Normally the engine would run at 1500 RPM, three phase 415 alternator with 240 AC from phase to neutral. Not sure how fast the engine ended up before it turned into shrapnel, but ALL of the electrical equipment downstream was turned into junk!
This video is proof that a man can achieve all the talent, know-how, and gain all the reach to teach millions of people not to be bumblefucks and that man will use that talent, knowledge, skill, and reach to instead declare himself king of the bumblefucks
How can you expect it to pull straight when you’re using a bent chain? Plus when your inclined planes are made to Whitworth specifications, that does help either.
It’s the rpm of the engine that will set the Hz. So, like said above once it’s loaded down a little it’ll be fine. If not can just adjust the rpm until it is.
Wait wait stop! .... I left the stove on at home lol
4 года назад
Some of those standby generators from warm southern areas can be real sweet deals, there are people that actually think that because it's 70 or 80 degrees that the block heater isn't needed, they don't get many hours on them before you hear the knocking.
As a journeyman HD Tech, I'd use the end of my unlit Colts Mild cigar touching the starter as a signal when to tell the apprentice to stop cranking the customer's starter. If I blew smoke at him he knew to stop.
Well, I guess that one will definitely be in the demonetized section of the ledger. And so it rightfully should. Well done on bringing that beasty back to life.
I miss the good ole days of Mitsubishi reliability. Back when they would run flawlessly until they crashed into the side of a U.S aircraft carrier.
God damn dude
Too soon?
I didn’t say I liked their cause. I just said they where flying good gear.
Omg I almost didn't get it
🤣
"Dont go for more than 10 seconds". My personal favorite is to keep the key turned until you smell something burning then ask the boss if I actually need to be at work that day.
The prophecy of the discarded diesel has been completed!
Go forth and tell the brethren of the great accomplishment.
As it is written.... Romans 14:13 Let us not therefore judge one another anymore: but judge this rather, that no man put a stumblingblock or an occasion to fall in his brothers way.
Tis a Crustmas muracle!
The smelly hydrocarbons !
my favorite method to tame a runaway diesel is to dump Co2 fire extinguisher into the air inlet pipe, that way later, if there's a fire you're really fucked...
What if the fire starts and the engine is still running what do you tackle first
@@joshuabest100 the safety guy.
I’ve been told a side benefit to unleashing the fire extinguisher contents into a runaway diesel intake is that it works great as a upper cylinder and valve cleaner as well.
@@matthewl67 CO2 will just kill the engine by removing oxygen. No harm to the engine
this is the way.
Well crushing the fence posts with a generator is a good excuse not to build the fence!
theyre now egyptian dollies
It's important not to take offence the posts have been removed......I'll get my coat
@bobster1982 - Any idea why/how your comment claims it’s 5 days old, but this video claims it was posted 1hr ago.
@@deazdeaz9150 because its available earlier for patreons
I take a fence to this post!
"300 Amps through those wires -- would make very compelling youtube". How true.
Everything's a smoke machine if you use it wrong enough. -Uncle BF
Michael Steeves Compelling for sure, but short lived.
Well, the wires went to industrial heaters so they might as well contribute, right?
We don't tune into this hockey game to watch the skating, know what I'm saying?
@@markfergerson2145 - Balanced load eh?
"300 Amps through those wires -- would make very compelling youtube."
ElectroBOOM has entered the chat*
Not surprising the Dewclaw has pants with built in knee pads.
Why do you think AVE keeps inviting him back?
pants with knee pads are good, right up until you forget that you are not wearnig them, on a small stone huge rock gravel or concreat floor, that innstant flash in ur head as ur knee touches floor. and then the screams started
Knee pads are fucking amazing. Work that took me 8 hours went down to 5 hours because I could just throw myself on my knees :)
@@ulle500 - Mighty tough in the Priesthood . . .
"promotion pads"
I like that Ya got the Dewclaw trained to say "Hello Tractor" on startup.
I’ve heard that in other vids, what’s the reference?
@@scottsimpson8902 i'm not 100% sure. I think it might be 2001: Space Odyssey "Hello Dave, Hello HAL" because there is to much computer in the tractors these days.
@@scottsimpson8902 the tractor says hello on the screen at start up, he shown it in another vidgeo. its only polite to respond back
Dewclaw has some good advice, "As long as you know it's the wrong decision that you're making, cuz then it's almost like you're making the right decision."
Its like you're channeling the spirit of Ricky LaFleur of the Trailer Park Boy's. Life advice to die by.
I think the government got the last laugh on this one... Technically they bought the thing with your money then, they got you to buy it back while also taxing you again....
again..
I've grown to love your content so much, that I hope to never see your face. The idea of the person we've grown to love can never add up to any of our faces, combined.
This is been a hell of a journey to see this bastard running for sure!
Agreed!! Sounds great!
The Fuel Pump Priming Thumb+forefinger stroking action seemed very well practiced and proficient.
Just observation.
And the matching heavy breathing.
"Don't go more than 10 seconds." Yeah, my wife tells me the same thing.
I dont care if ya gotta go to work
Not like I could go back to back without a sammich anyways.
Sounds like six seconds too long for me.
Wait, what?
lol the ol two pump chump - haven't seen that one for a looooong while
No, you heard her wrong, she asked you to last more than 10 seconds ya dingus.
Didn't think the day would ever come that we'd see this beast run again.
That is one of the cleverest way to grade and compact gravel I've ever seen.
Remember to put oil in it. Our competitor didn't and during a power outage they reported that their generators were running and more diesel was being delivered, shortly before going completely dark. Turns out, they never ran their generator tests long enough to discover that there was no engine oil in them.
I'm Canadian and I can't get over the true "Canadian Accent" of the two of you :)
It's a joy to watch your vijeos :)
A good way to end my workweek. With a good laugh and a cold one. Does anyone else feel like this guy is part of your family?😜
If so, you'd hope he's house broken.
Can't let my kids watch these videos the wife says.
We're still in pain from laughing long and hard on fixing the kitchen plumbing.
There is, without a doubt, more BTU's flying out the rad of the generator than there is coming out the two electric heaters.
That comment thou.... WIN
One can always park the gen. unit into the shop and vent the exhaust directly into the shop also for increase in efficiency.
On a serious note, I wonder why we don't see water-cooled homeowner generators to heat the homes with the 'waste' heat energy pulled off the engine.
@@randomidiot8142 google: CHP (combined heat and power [make America vibrate again (diesel lobby)]).
I see your diesel and raise you a 1940s era incandescent bulb. I use on plugged directly into a wall socket on my bench, it's a dim as a candle, as hot as a star.
AvE, You guys are working way too hard. Off the top of my head, I can think of seven easier ways to stick gravel to fence posts.
That last part in the outro was the generator after an hour or so.
You two are fucken edumicating the world through humour and entertainment.
Keep it up
Cheers!
One always appreciates a Stan Rogers parody. There are just too few of those in the world.
300 Amps thru this wire = .5 seconds of the best youtube ever!
0:22 21st Century technology: computers, high power internal combustion engines, hydraulic systems, cargo helicopters, high tensile steel, ...the lighting itself is under our control, herded through wires and caged in batteries.....
And yet, we still can’t beat the ancient Egyptian magic of......a bunch of rolling logs...
Aww man I love this guy's sense a humor. Couldn't work with a guy like this because I wouldn't be able to get anything done.
"Hello Tractor" - Dewclaw Dec 2020
Is it a throwback to the movie " the sand pebbles" with Steve Mcqueen? When he walk in the engine room and says " hello engine"
I have moved so many heavy things in my shop alone with a bunch of round tube on the floor, I saw it one time on a history channel doc about how they used to build stuff. Burnt into my memory
It's in cases like these I like to applaud from a distance, as to not catch anything. Such as "on fire" or "a sleeve on a drive axle". I'll come closer in a minute.
Good job!
Sounds like you are a survivor. I like to stand back at least 2 oopses.
The commentary is worth the price of entry all by itself. The engineering is worth the step back in time thank god both are free.
Old city transit trick. When changing the fuel filter, fill it up with atf, makes it easier to prime and the fluid will clean the injectors
I'm sure AFT would work well for an 80s engine, but maybe stick with diesel. also, fill up the oil filter before you put it on
@@FROG2000 Bah, that engine was already run 'til toast o'clock without oil, what's another few seconds
Great for 7.3l power stroke too. Some shops/owner's swear by a quart a month in the tanks too. Your mileage may vary. 😎👍
Only good for older diesels. The more modern stuff will end up with problems running something other than diesel through them.
@@NBSV1 considering it has what appears to be a old school bosch style pump, probably would not hurt anything.
Thanks for having dewclaw we enjoy his company
One of the guys has the nickname 'Singer Sowing Machine'. Although he is hung like a needle, it went in and out like feck 😂🤣😂
Block heater is hosed backwards. It works through thermosyphon. Bottom radiator hose T delivers cold coolant to the bottom of the block heater, hot coolant bubbles out the top to the engine.
That Mitsubitchy, she purrs.
Thanks Ava, Everybody needed this one . WE NEED A JOB !
When you have air in the fuel line of a diesel, cover the air intake while cranking the engine. This creates vacuum and sucks the air bubbles through. Then it fires right up.
As a Norwegian, I often find the Americans kind of delicate, - no swearing on TV. No nippels. No nothing.
And in comes AvE and saves the day again. Super funny 👍 Thanks 😘
He's from Canada
Using a Japanese wrench on a Japanese motor. That’s how you know you’re doing her right.
I think they call that hen-tie
@@lemuelseale1640 No thats chicken bondage.
What wrench is it?
@@tomkeehn Nepros Adjustable Wrench
@@lemuelseale1640 Hen-tie? Eww who wants BDSM chickens?
I think Dew Claw deserves his own vise after all that good work.
When in danger or in doubt, run in circles, scream and shout!
Robert A Heinlein
The heavy breathing while you're priming it is a nice touch.
Doing it the hard way. Crack the valve and jam an airhose in the tank, seal tightly with a rag until she comes.
so you've met my x then?
that and crack all the injector lines loose and crank till she pees on herself, Then close them. The ol bitch will fire in the first few seconds then.
No rubber required
@@-tr0n Fuel, air, compression... all that is missing is a spark. But if you have enough compression you don't need a spark. LOL.
had some real fun this fall after a piston change on the ol john deere inline 6. disconnected the sediment bulb to prevent someone from trying to start the turd hauler and completely forgot about it once ready to start. thought there was air in the lines so we cracked the injectors to bleed only to entirely fill the system with air. a fun 3 hour bleed of the whole thing was just what the doctor prescribed.
So how many bottle caps per KWH are you planning on charging during the apocalypse with that contraption?
5 Nuka Cola Quantums to recharge your fusion core
“It might be thin but it sure is short”. I’m in fucking stitches
Fitting 12 ga wire in a 250 kcmil hole lol "you can fit more of them in that way" 😂
There's 37 strands in 250 wire, not sure if each individual strand is same size as 12 ga, but I think its close.
I just watched a Zip Ties and Bias Plys vidya today. If I didn't know better, I'd say it's the same fella with an education he's pissed he paid for, just as a before and after. You guys are great
what a good way to start a weekend
Holy hell that Nepros NWM-250 adjustable wrench looks amazing. I paused the video and went frame by frame to get the make and model. I knew it was one of your Japanese fancy tools. $80+ for one of them shiny dealies though. Too rich for my peasant blood right now. Excited to see this thing finally chooch. Hope it lives forever.
5:24 I've pumped that exact primer on enough engines that I could tell by the sound and the motion that you were nowhere near there yet. The new black primers are supposed to leak less.
Sparky work not paying the bills, but I'm glad to see ole Dew Claw should have his grow show up and running soon.
Title: Will it run?
Me: No idea but I am probably going to laugh at something here
Uhhh the title says will it shart for me.
This keeps getting better and better as you watch
This was fuggin' beautiful.
Never underestimate the dangers of a runaway diesel engine. While I haven't witnessed this directly, I have been witness to the aftermath. 'twas on a (very new) fishing boat and the engine was connected to a three phase alternator that supplied almost all of the AC requirements on the boat. Normally the engine would run at 1500 RPM, three phase 415 alternator with 240 AC from phase to neutral. Not sure how fast the engine ended up before it turned into shrapnel, but ALL of the electrical equipment downstream was turned into junk!
Angry porta-pixies
The fram filter was a nice touch. The patsy got screen time
This video is proof that a man can achieve all the talent, know-how, and gain all the reach to teach millions of people not to be bumblefucks and that man will use that talent, knowledge, skill, and reach to instead declare himself king of the bumblefucks
The distressed fence posts are worth more. Ingenious idea. Two jobs one operation.
For about a year: wondering, wondering, wondering...what about that generator, eh?
Points for the proper use of the Knuckle Busting Nut Rounder, extra points for the excellent Space Balls reference!
How can you expect it to pull straight when you’re using a bent chain? Plus when your inclined planes are made to Whitworth specifications, that does help either.
08:09 I see by the look of it, that... you are a man of culture and taste.
Crescent wrench aka Saskatchewan socket set.
Appropriately packaged in a genuine Saskatchewan Sealskin tool bag to boot!
I like how dewclaw is the one finishing all the projects around here
Eeehh 62 or 60 Hz what ever gets the job done
That's no-load speed, put something on it to harness the pixies and she'll settle right down to 60. I think ours at work go about 62-62.5 Hz no-load.
@@timothybarney7257 also, those gauges are rather subjective. Verify the output with a good meter before trusting those gauges.
Mr. Mom reference? 220, 221 whatever it takes.
It’s the rpm of the engine that will set the Hz. So, like said above once it’s loaded down a little it’ll be fine. If not can just adjust the rpm until it is.
Probably the Fetzer valve.
Can't beat them sore D##k deals!!, lol nice to see you got that running. Still remember that tear down video. Good stuff
Some speculate that this is exactly how the mighty pyramids of British Colombia were built.
😂I've been waiting a long time for this one,we electricians need a lot of thinking time!Top job.
Take forever to wire up the motor and when the boss asks why it doesn’t work... “The mechanical guys didn’t level it!”
60ish Hz.
Perfect!
8:17 The finest Canadian mating call of 'em all. Don't get better than that boys!
Wait wait stop! .... I left the stove on at home lol
Some of those standby generators from warm southern areas can be real sweet deals, there are people that actually think that because it's 70 or 80 degrees that the block heater isn't needed, they don't get many hours on them before you hear the knocking.
3:13 Thats a Rickyism from trailer park Boys! Genius!
Excellent hand pumping on Dewclaw rod. Pumped till it blew it's shomoo on his safety specks.
Ichipussi diesels need LOTS O' PRIMING to get 'em to chooch.
But they chooch really good when wet
"but, ya know, a demon haunted world and so forth"
he's got a point
missed opportunity at 5:23 ... "it never took so long"
Underrated
I love this guy, hands off baby doll.
Heavy breathing at 5:30 was intense.
Nice one AvE. I'm glad that one worked out. Glad to see more vids from you.
I'll amend your comment slightly: Got to give credit where credit is Dew, Claw.
I'm am happy to see you got it running 👍
"Third Eye Brown"
As a journeyman HD Tech, I'd use the end of my unlit Colts Mild cigar touching the starter as a signal when to tell the apprentice to stop cranking the customer's starter. If I blew smoke at him he knew to stop.
Is that the same generator that was run without oil and had the rods knockin’?
@@gailtaylor1636 I could hardly watt.
Thought it was grounded but I was mistaken
I was so amped to see it kick over.
A lot easier if ya fill the fuel filter before you put it on. You can even use transmixer fluid if ya got no spare diesel sitting around.
SPACEBALLS THE RUclips COMMENT
I was going to say Dew wasn't using his fancy black stanley tools but in the end he could not help himself!
0:20 Uncle AvE, I think there might be prior art on that one...
Well, I guess that one will definitely be in the demonetized section of the ledger. And so it rightfully should. Well done on bringing that beasty back to life.
20 minutes past warranty period!
I once used fire wood to install a drivetrain in a car in Dawson Creek BC . And it worked!
Was disappointed there was no 'Consent in a Can' used. I thought for sure that was standard Kanukistan procedure for starting a diesel.
They in eastern canaderp.
@@andyreid7274 aren't they in BC? It seems to me AVE has brought it up several times.
You can get a lot done real quick without an overseer around. Also safety third, second, well it’s up there on the list.
Listening to your yard parrots singing "any cockle do!"
Great job guys. Conveniently posted on a Friday night so I can go hunt a big black mamba for saturday's endeavors!