Before changing the PCB you can test if pressing on connectors (big ones) start charging. If yes, you can put something above to press them by the plastic case. This worked for me! Thanks!
You just saved me a ton of trouble. I realised that I dropped my (silicone skin covered) phone earlier in the day and figured that some connectors were definitely loose. I pressed with my fingers the back cover of the phone (on a flat surface with the silicone face cover on). Charging started working just after that quick operation. Thank you!
@@adrian-iulianmitrofan-bitc5082 Amazing! BIG THANKS to you especially to Marius B for the GOLDEN TIP! I lost all hopes and fear to open my A40 on my own but the voila your comments helped me save all troubles and further damage.
This really worked for me, thanks!! Replaced the charger port on my A40, and tadaaaa! Your instructions are awesome. I used a credit card instead of a guitar pick
*✅ Become an EXPERT👉👉* movilone.eu
Before changing the PCB you can test if pressing on connectors (big ones) start charging. If yes, you can put something above to press them by the plastic case. This worked for me! Thanks!
what kind of material did you put over the connectors?
You just saved me a ton of trouble. I realised that I dropped my (silicone skin covered) phone earlier in the day and figured that some connectors were definitely loose. I pressed with my fingers the back cover of the phone (on a flat surface with the silicone face cover on). Charging started working just after that quick operation. Thank you!
@@adrian-iulianmitrofan-bitc5082 Amazing! BIG THANKS to you especially to Marius B for the GOLDEN TIP! I lost all hopes and fear to open my A40 on my own but the voila your comments helped me save all troubles and further damage.
Thank you so much man, you really helped me. Tightening the pins with tweezers will also help
Using a big clamp to tighten area behind the finger print area which allows my battery to charge....hooe.my screen don't crack 😂
You forgot to put the black screw back in you removed @3:15, otherwise clear tutorial.
This really worked for me, thanks!! Replaced the charger port on my A40, and tadaaaa! Your instructions are awesome. I used a credit card instead of a guitar pick
Thanx a million mate :D coaxial antenna was issue !
"Plastic triangular opening tool" AKA a guitar pic!
Very happy with your chanel!
:) Thank you for your comment! Best regards
Thank you! Good job!
Just what i was looking for thank you
This is a great video! Will this reset the phone and restore to factory settings? I want to fix the port without losing everything on my phone. Thanks
No, Anisha! You ll not lose any data information during the repair process. Best regards and thanks for asking!
You don't seem like someone who should attempt doing anything to their device...
Good. Workings
Kaiyum Telecom thanks for watching our tutorial! Best regards 👋
samsung is a real struggle😣😣😣
Thank you, Ahmad! you are right! Best regards
All modern phones are.
He forget the screw on the sub board
that 69 at the end was like a rickroll
So, I was just wondering... how much would the whole service cost?
Where can i buy this chip or however its called?
check desc
thanxs
I have done that still not charging for me
what does the black plastic that is over the battery and what happend if it broke
Wireless charger,
Broken:no wireless charging
hi mam/sir plz make video your mactiones and eqp tools
Shaha Pratik thanks for your suggestion! I ll prepare one ☝️
@@MovilonePhoneRepair thank yo ..
during disassembly i broke that golden cable on bottom (MAIN1 R16 190901) but everything seem to work, any idea what function this connection have?
start opening at the top to avoid damage (i did the same yesterday when i hotwired my phone to get it recharge)
Da de unde esti? Hahah
why the charging port is so expensive? Is it worth it?
yes, it s worth it! This device is still repaired! Best regards
Please how do you identify the original part...
noobs