I just got one a few days ago. the handle is awesome and the knife is something to look at. Mine will also need some edge work and the grind is a bit uneven which gives the tip a bent look. These discrepancies are easily fixed as they are not extreme. I have not tested the AN.58 very much but so far it seems to be okay. I like it very much. Thanks for the video!
Now that's one cool knife. Absolutely loved that olive wood. I would love to have some in my shop for some projects. loved the slow motion ferro rod action. Thanks for sharing. Atb. Robert
Que belleza! Me gusta mucho el color de la madera. Nice looking blade, I've not heard of this knife maker before, thanks for showing it. The grooves in the handle looked very interesting too.
Oh my GOSH that is a BEAUTY!! I've never seen one like that. LOVELY!! OH! Love the way you say, "Coyote." (In Wyoming, we really mangle it, "Kai-yut"). Nice!! Jules
+Nathan4071 I will have some available in about a week, I'm setting up at an outdoor expo next Friday and Saturday, whatever doesn't sell there will be available. Anything in particular you are looking for?
+Nathan4071 I will do a video of what I have available next weekend, if you don't see anything you like, you can email me : dmize2009@hotmail.com or check out my website: www.mizecustomworks.com
The handle on that one is quite beautiful .. very nice! Perhaps lowering the edge angle a bit will get it to bit better in the wood .. It looked like a knife i have where the shoulders of the edge kept getting in the way of a consistant good bite. Great looking knife .. Take care!!
Nice lookin knife. Hollow grind? I always wondered about knife scales that are grooved in that fashion. Personally, I think they look good but may cause some discomfort to your hand after extended use. Your thoughts? Good vid Nathan, thanks for sharing! Greetings from Germany
+Modernbushcraft I wish I new how to do that. I used a lansky sharpening system and did a 20 degree on each side angle but it took me an hour. It bites into the wood better. Thank you for your input.
+Nathan4071 aha sharpen it on the lowest until you have a edge think it is 17 on the lansky? then put it on 20 and only do a couple of strokes on each side with the finest stone. but i think it would hold up fine with just a 17 degree edge too 😊
I just got one a few days ago. the handle is awesome and the knife is something to look at. Mine will also need some edge work and the grind is a bit uneven which gives the tip a bent look. These discrepancies are easily fixed as they are not extreme. I have not tested the AN.58 very much but so far it seems to be okay. I like it very much. Thanks for the video!
The scales are beautiful. Thank you.
Now that's one cool knife. Absolutely loved that olive wood. I would love to have some in my shop for some projects. loved the slow motion ferro rod action. Thanks for sharing. Atb. Robert
+BluegrassBushcraft The scales are very nice. You know me. I like playing with my ferro rod.
Thank you Robert.
I am always interested in the different steels out there.
Olive wood sometimes has little or no pattern but that handle/scales look great.
+PREPFORIT I got lucky with these scales.
Thank you for supporting my channel.
Que belleza! Me gusta mucho el color de la madera. Nice looking blade, I've not heard of this knife maker before, thanks for showing it. The grooves in the handle looked very interesting too.
Gracias. The knife scales are beautiful and they feel good in the hand.
Thank you Rashid.
that is a great looking knife brother thanks for sharing
+JusBurninItDown Smothers Thank you Brother. I'm working on re-profiling the edge.
Have a look at the Nieto Terrano scandi. It can also carve since it has a scandi edge.
Okay. I will check it out.
Pretty handles on that knife. Always fun watching the ferro rod .
+coyote238 Thank you my friend. The line of knives is named just like you.
Ferro rods are fun.
That has to be one of the best looking knives I have ever seen. Absolutely beautiful
+John “survivor johnny” Tewelow It's nice but I had to regrind the bevel to 20 degrees. Now it bites into the wood better.
That is one awesome knife.. certainly a powerful tool ya got there!
+JimmyFungus It's a nice knife. Thank you Jimmy.
Ke bonito el cuchillo! Thanks for sharing mi amigo! Nathan
+El Rabbit's Tactical, Reviewsl Gracias a ti Conejo.
Thanks for making a review with all the testing I needed to see! I've been looking at Nieto for a while.
Thank you for your time Brian.
That's a beautiful blade Nate.. Love it my friend.. very sharp video
+Shiny Knife Thank you Richie.
Have a good weekend my friend.
Sure like your new knife. And enjoyed the video. And may the blessings of the Lord be upon you all.
+Randy Parker Thank you Randy. I always appreciate your kind words my friend. Have a nice weekend.
Oh my GOSH that is a BEAUTY!! I've never seen one like that. LOVELY!! OH! Love the way you say, "Coyote." (In Wyoming, we really mangle it, "Kai-yut"). Nice!! Jules
Olive wood is beautiful. Thank you Jules, have a nice week.
n addition to a beautiful knife, we can see that it is very efficient! Congratulations great acquisition.
A friendly hug bushman!
Thank you Mateiros.
OMG one beautiful knife,love it
+phyllis mulkey Thank you Phyllis.
One wicked knife! Very well packed!
+guns4funcajanajustin Thank you Justin and Jana.
That is a great looking knife. I love the handles, blade, everything.
+Lazy Man Prepper Thank you my friend.
That is a beautiful knife...both the blade but especially the olive wood handle. It would be a pleasure to own such a fine knife.
+David Chouiniere Thank you David. It's nice to hear from you.
I bought this one from ecop. $44.00 Shipped on ebay.
Very cool Nathan you have all the toys buddy!
+Aaron Nelson Thank you Aaron.
That's a beautiful sheath.
Some of the prettiest olive wood I've seen!
+Kyknifeman1 Thank you. You have any knives for sale?
+Nathan4071 I will have some available in about a week, I'm setting up at an outdoor expo next Friday and Saturday, whatever doesn't sell there will be available. Anything in particular you are looking for?
A bushcraft knife.
+Nathan4071 I will do a video of what I have available next weekend, if you don't see anything you like, you can email me : dmize2009@hotmail.com or check out my website: www.mizecustomworks.com
Okay. Lets see what you have left after the show.
Beautiful blade. and that handle is all kinds of awesome.
Thank you Wildman. Check out the video titled no subscription necessary.
Nathan4071 I just watched it.
Okay.
Great piece of craftsmanship.
+Tim Watson Indeed. Thank you Tim.
That wood is stunning! What do you think about that steel?
The steel is holding good. I did a 20 degree reprofile and so far it's okay.
beautiful scales very nice knife
+MCK Thank you Mark. I'm was regrinding the edge to 20 degrees. It's not that easy. After about an hour, I got it.
I like that one Nathan. Interesting. Good looking knife.
+The Parker Ridges Thank you Team.
Don't know much about the steel but Spain has a good history of making knives.
What is the thickness of the blade?
Very nice review lovely looking handle
+cabotbluegill Thank you Mr. Howard for your continuous support.
Great Video Nathan.
+TheFourOfNine Thank you Jacinta.
have a good weekend.
Nathan4071
Thanks Nathan, enjoy your weekend.
Love Jacinta xX.
Beautiful blade!
Thank you Timberwookie.
excellent Nathan I am greeting
+Lola K Thank you Lola.
great video !
Thank you.
That's a beauty for sure!
+zalkona Thank you. I'm working on reprofiling the blade.
beautiful knife
Thank you Chris.
The handle on that one is quite beautiful .. very nice! Perhaps lowering the edge angle a bit will get it to bit better in the wood .. It looked like a knife i have where the shoulders of the edge kept getting in the way of a consistant good bite. Great looking knife .. Take care!!
+TimBlankJ What angle would you recommend?
Thank you Tim for your input.
Nathan4071 Well I don't know how that one is ground but I like 15 degrees per side .. sometimes less if the steel can handle it.
I think it's at 25. I will do 20 first and then 15
Thank you Tim.
That looks to be a great knife and I like the wax too
+Dean O Thank you my friend. I did a regrind on this knife and it's not easy. I got it after about an hour.
Nice lookin knife. Hollow grind? I always wondered about knife scales that are grooved in that fashion. Personally, I think they look good but may cause some discomfort to your hand after extended use. Your thoughts? Good vid Nathan, thanks for sharing! Greetings from Germany
I have used it and so far no discomfort but I only used the knife for feather sticking and batoning.
Now that is a knife!
+smetlogik Thank you.
Отличный нож..!!!!!... Отличное видео...!!!... Молодец...!!!!..))))..+1.....
+Corcoran AL Thank you my friend.
Love the wood.
+sharon crowe - Snoo's Backyard Bushcraft Thank you Sharon.
What's the length of de blade? Tnx
Thank you for your time. The blade is 4 inches.
What product gives olive wood?
Gracias desde España
The olive tree. Saludos desde California.
good looking knife!
+Dubglock23 Thank you my friend.
Do you like the grooves in the handles ?? Nice knife
Thank you Terry.
Un cuchillo muy bonito 👍👍
Gracias. Saludos.
Nice knife!!
+PrioritySurvival Thank you.
What kind of wax is that you used on handle?
Here is the link to the wax I made.
ruclips.net/video/x0Uflrnzq0M/видео.html
that's a keeper for sure nice Nathan atb ..tom
+kabaruser It's a nice knife. I need to get it sharp.
Thank you Tom.
+Nathan4071 are you in Spain ?
+kabaruser California.
+Nathan4071 my gf from Cali the bay area
Right on. I saw Andy drive to your state.
NICE!!!
+David West Thank you David.
Thank you for the share
Thank you Boylan.
Schöne Messer! Like! Walter
+Walter Hamburg Thank you Walter.
Also, how does a person get a ferro rod like that one?
It's sold out.
+Nathan4071 When will you be getting more?
about a month.
A donde compraste ese pedernal?
Aqui esta el link. Gracias.
www.ebay.com/sch/nathan4071/m.html?_nkw=&_armrs=1&_ipg=&_from=
muchas gracias!!! saludos!
would thin it a fair bit behind the edge at say 10 per side then put a 15 degree micro bevel on it if you want much better performance.
+Modernbushcraft I wish I new how to do that. I used a lansky sharpening system and did a 20 degree on each side angle but it took me an hour. It bites into the wood better.
Thank you for your input.
+Nathan4071 aha sharpen it on the lowest until you have a edge think it is 17 on the lansky? then put it on 20 and only do a couple of strokes on each side with the finest stone.
but i think it would hold up fine with just a 17 degree edge too 😊
Thank you for your advise. I will do that.
+Nathan4071 post a video showing how it is when done brother 😊
I will.
Why though when you can get a benchmade puuko for $125 in cpm3v lol
Benchmade makes good knives. I own a few. I just don't like the handle on the benchmade puukko.
Coyote 2058,,,,23cm????
Ahm...this is an nieto..made in spain? Hmm...i say its an Puma Ondular 1, made in germany ...look at pumaknives.de
Классное видео с меня лайк заходите на мой канал ест интересное видео.
+В поисках золота с Мистером Икс Thank you.