This is a great tutorial, and great features from the pedal too! I've been looking for a budget multi effects pedal and this video definitely helped me decide :D
I have the MG 30 it’s great. But I have loaded the quick tone as well as the proper drivers on my Windows 10 but... it keeps saying the device needs to be connected even though it is connected. Any advice why it won’t connect? Thanks
@@nmol9733 ok so here’s what I can tell u ...I’m not very computer savvy so I had a friend help. Ok first download the editor and Driver for your operating system either Apple or Windows 10 or Windows 7...whichever you use make sure you download correct one. Also download firmware. Next do the firmware update. After that here’s where things get a little over my head...but you need to open something called the Bin File. Once you find and open the Bin File it allows you to open the Quick tone editor. I wish it was simpler to do but that’s what my friend did exactly. Hope it works .
I resolved this frustrating issue and guess what it was way simpler then what i was doing.. Step 1. Download and install the audio driver from the website. Step 2. download quick tone from the website. Step 3. download the latest firmware from the website and follow the instructions to install the firmware which is included with the download. Step 4. MOST IMPORTANT. Turn off the processor. press the loop and the drum button on the processor together and turn on the power of the processor both the buttons will turn green that would mean that your processor has entered into to firmware installation mode. Install the firmware. Step 5. restart the processor and go to quick tone it will work now.
Any solution on lossing sound while using NUX 300 to a real guitar amp? While practicing for about 1 hour eventually lost the sound coming from the effect. Any advice on how to solve this problem?
hi, my quick tone programme will not start, i have tried various usb 'data' cables, it has a pink 'x' in the top left hand corner when it tries to start, but doesnt get any further than that....i have uninstalled the drivers and reinstalled them , but it still wont work.....when i look in ''devices'' it all looks ok. and i have sound, but no quick time...im running windows 7. any help would be appreciated. thanks .
@@nmol9733 hi, i got so pissed off i just sent it back, and gave up.....nux needs to sort their products out big time......the other reason i gave it back was i found the distortions to be very ''wooly'' or ''fizzy'' ....it was as if the sound was around the note, with no attack...kind of as if you had your guitars volume pot turned back a quarter......not good.
@@100roberthenry Sound is not a concern for me but if it doesn’t connects to the computer I’ll be disappointed..anyways thanks for the answer. Appreciate it.
I resolved this frustrating issue and guess what it was way simpler then what i was doing.. Step 1. Download and install the audio driver from the website. Step 2. download quick tone from the website. Step 3. download the latest firmware from the website and follow the instructions to install the firmware which is included with the download. Step 4. MOST IMPORTANT. Turn off the processor. press the loop and the drum button on the processor together and turn on the power of the processor both the buttons will turn green that would mean that your processor has entered into to firmware installation mode. Install the firmware. Step 5. restart the processor and go to quick tone it will work now.
Hello, curious if one of you played with an acoustic guitar via the MG300. The sounds with an electric guitar are great. But I myself have a Taylor 816CE and want to use a little echo and reverb true the MG300. In anticipation, greetings Fred
Just bought the new MG 300. I'm not able to connect to the modeler with quick tone. It keeps showing, please connect to the modeler... Can someone please help.
Can you do a step-by-step video on how to update firmware and how to connect the quicktone to the computer. I can’t seem to connect device to the computer
I've seen at least 10+ videos of this unit and it sounds amazzing. Is this really that good? I wanted to get an analog pedal/ unit specifically like the nux cerebus but can't help thinking this is so much better as an option for tones even after it being digital.
Hello, how do you save a preset in another bank or program different from the one where it was created? These things are basic and important and you don't explain them anywhere or in a manual or anything. Thanks
I am very frustrated, firstly after setting the audio output volume, each time I switch from one tone to another, the audio coming out of my front stack amp, is so loud…I cannot seem to control the audio…way too loud, pedal was calibrated, but this does not help..also it’s hit or miss my Mac sees the MG300….can anyone advise me, seems every video I watch has nice sounds and not way way too loud through their amps….what am I doing wrong…..
Hi Monk, I just bought the MG300. How can I check the firmware version which is in my MG300? Can't find it anywhere on the small the display of the device or somwhere in the Quick tone application. Thanks, Ton
How are you re-amping the USB signal exactly? I have my audio IN and OUT as the NUX MG-300, but my dry track never gets re-amped. I'm using Tracktion Waveform 11 PRO and I hear the wet or dry signal fine and can record it, but the re-amping never gets the dry signal back into the MG-300 when I set it to re-amp mode in QuickTone.
hey man I already installed the driver ASIO fro NUX but it says ASIO inactive in the NUX control panel. Also no sound from input is coming in but the output thru the NUX Speaker is ok. how can I resolve this?>
I can't get sound to play back through the Mg-300 through headphones, etc after recording. QuickTone seems to freeze up when I try to change between wet/dry/reamp. Restarting computer doesn't help. Didn't have this issue with my Scarlett 2i2.
Hi! I have encountered some trouble with quicktone. I can actually proceed to the GUI of it but there is no sound when i pluck or strum my guitar. My guitar is plugged by the way. I am using windows 10. Checked the device manager in sound section and saw Nux Mg300 Audio saying "Device Cannot Start (Code 10 Error)" with a triangle exclamation point icon on it. How should i fix it? By the way, my only need is to bring the sound of my guitar whenever i use quicktone. Big thanks!
While using the MG-300 as an interface i surely can record, but it is impossible to monitor or even play back. If i want to do that, the only workaround I've found was to set my input to Nux Mg-300 but my output to System Default (Macbook Speakers). So i have to use my headphones connected to the mac and not to the nux. I'm using Macbook M1 and logic. Does anybody knows how to solve this?
Unos me compre la nux mg 300 hace un mes He creado presets pero pasando un tiempo se borran y es como si volviera a estar con el preset de fabrica alguien puede ayudarme por favor
@@andreapasillas5803 What I meant, I never paid for any driver for any device. Never in my life. Finally I managed to make the MG300 work (no drivers needed) but I resold it. I have the Valeton GP-100 and it's better IMO.
Yes, it's broken. I've emailed support about it. It works on Windows though, so if you have access to a Windows machine, you might try that. My device was not bricked after unsuccessful update from Mac. What bothers me though, after the update I checked the firmware version on the device and it still showed 1.00, you would think that it should show 1.06.
@@nuxaudio when you say the MG 300 with SILVER knobs are for the domestic market do you mean the CHINESE Domestic Market? And the MG 300 with WHITE KNOBS are for EVERYONE else like US, UK, Au, CA markets.
Weird how you can clearly hear clicks and glitches at 9:21, but no ones adresses it. Truth is Nux mg-300 is a nice litlle toy, but when it gets to recording, it's useless.
I have the same prob, i thought i was the only one and i think i just got broken nux mg300 cuz i just buy a new one and it's really annoying for the glitches thing Does it went well if we used audio interface with this mg300?
Muy buena mg . Pero Sería bueno que se pudiera hacer la actualización en android digo a través de un Smartphone y tener el QuickTone en android también porque no. Poder manipularlo en el celular.
Some usb cables are charge only, you need a data usb cable. I had the same problem now it’s ok. Find usb cable that used in smartphones for data transfer.
cant believe no one commented on the playing. sounds amazing!
If the output device is NUX MG300 where does the audio come out of? Doesn't play through the computer speakers
This is a great tutorial, and great features from the pedal too! I've been looking for a budget multi effects pedal and this video definitely helped me decide :D
I have the MG 30 it’s great. But I have loaded the quick tone as well as the proper drivers on my Windows 10 but... it keeps saying the device needs to be connected even though it is connected. Any advice why it won’t connect? Thanks
Same problem here. Please let me know if you find a way out.
@@nmol9733 ok so here’s what I can tell u ...I’m not very computer savvy so I had a friend help. Ok first download the editor and Driver for your operating system either Apple or Windows 10 or Windows 7...whichever you use make sure you download correct one. Also download firmware. Next do the firmware update. After that here’s where things get a little over my head...but you need to open something called the Bin File. Once you find and open the Bin File it allows you to open the Quick tone editor. I wish it was simpler to do but that’s what my friend did exactly. Hope it works .
I resolved this frustrating issue and guess what it was way simpler then what i was doing..
Step 1. Download and install the audio driver from the website.
Step 2. download quick tone from the website.
Step 3. download the latest firmware from the website and follow the instructions to install the firmware which is included with the download.
Step 4. MOST IMPORTANT. Turn off the processor. press the loop and the drum button on the processor together and turn on the power of the processor both the buttons will turn green that would mean that your processor has entered into to firmware installation mode. Install the firmware.
Step 5. restart the processor and go to quick tone it will work now.
@@nmol9733 Thanks you so much .. that was helpful.
Any solution on lossing sound while using NUX 300 to a real guitar amp? While practicing for about 1 hour eventually lost the sound coming from the effect. Any advice on how to solve this problem?
Do you need to run a DAW programme to get sound out of the computer also Nux control panel says ASIO not active.
Can anyone help?
I don't have laptop now so can i use directly without upgrade firmware no update driver?
Can we record it in garage band?
Hi can you use garageband to record?
Yes, absolutely.
Great device. Could we have more IR slots? 1 just isn’t enough.
I know that I can load 1 IR into 1 bank. Can I load a total of 26 different IRs (1 per bank)? Thanks
hi, my quick tone programme will not start, i have tried various usb 'data' cables, it has a pink 'x' in the top left hand corner when it tries to start, but doesnt get any further than that....i have uninstalled the drivers and reinstalled them , but it still wont work.....when i look in ''devices'' it all looks ok. and i have sound, but no quick time...im running windows 7. any help would be appreciated. thanks .
Same issue here. Let me know if you find a way.
@@nmol9733 hi, i got so pissed off i just sent it back, and gave up.....nux needs to sort their products out big time......the other reason i gave it back was i found the distortions to be very ''wooly'' or ''fizzy'' ....it was as if the sound was around the note, with no attack...kind of as if you had your guitars volume pot turned back a quarter......not good.
@@100roberthenry Sound is not a concern for me but if it doesn’t connects to the computer I’ll be disappointed..anyways thanks for the answer. Appreciate it.
I resolved this frustrating issue and guess what it was way simpler then what i was doing..
Step 1. Download and install the audio driver from the website.
Step 2. download quick tone from the website.
Step 3. download the latest firmware from the website and follow the instructions to install the firmware which is included with the download.
Step 4. MOST IMPORTANT. Turn off the processor. press the loop and the drum button on the processor together and turn on the power of the processor both the buttons will turn green that would mean that your processor has entered into to firmware installation mode. Install the firmware.
Step 5. restart the processor and go to quick tone it will work now.
@@nmol9733 great, glad you got it going,...
I can't connect to PC with my mg 300. Any way to fix this?
Hello, I have the Domestic version with chrome knobs, how can I upgrade the firmware? Quicktone says Please Connect the modeler with usb
Quick tone nie działa. Instaluje się ale nie wyświetla strony , klapa.
Hello, curious if one of you played with an acoustic guitar via the MG300. The sounds with an electric guitar are great. But I myself have a Taylor 816CE and want to use a little echo and reverb true the MG300. In anticipation, greetings
Fred
question sir, do you have tried to record it direct to the android phone? like MUSLADY/CUVAVE/CUBE BABY?? TIA
Is It a must to update it
Just bought the new MG 300. I'm not able to connect to the modeler with quick tone. It keeps showing, please connect to the modeler... Can someone please help.
Possibly the wrong USB cable. It needs to be a data cable, not charging.
can this method also be used in the garageband application?
Can this record through phone via usb cable? Nice vid btw.
Can you do a step-by-step video on how to update firmware and how to connect the quicktone to the computer. I can’t seem to connect device to the computer
Me too. 2 days trying and no communication at all with computer
Same problem!
The problem was the cable. Some are just for charging and others are charging and data.
@@Vinifloriano Im using the one supplied still no joy
Mine came with no cable. Would try another
Seems a lot of people having computer connection problems but no support from NUX!
I've got mine no issues. It detected my device fast unlike my zoom g5.
I've seen at least 10+ videos of this unit and it sounds amazzing. Is this really that good? I wanted to get an analog pedal/ unit specifically like the nux cerebus but can't help thinking this is so much better as an option for tones even after it being digital.
Can we record mg300 using any DAW like garage band on Mac?
Hello, how do you save a preset in another bank or program different from the one where it was created? These things are basic and important and you don't explain them anywhere or in a manual or anything. Thanks
I am very frustrated, firstly after setting the audio output volume, each time I switch from one tone to another, the audio coming out of my front stack amp, is so loud…I cannot seem to control the audio…way too loud, pedal was calibrated, but this does not help..also it’s hit or miss my Mac sees the MG300….can anyone advise me, seems every video I watch has nice sounds and not way way too loud through their amps….what am I doing wrong…..
Hi Monk, I just bought the MG300. How can I check the firmware version which is in my MG300? Can't find it anywhere on the small the display of the device or somwhere in the Quick tone application. Thanks, Ton
Hold Edit/Exit and Save button for 3 seconds, by pressing the modul group button []choose "Info" and press Edit/Exit
@@bluesound666 ok great, thanks Andries👍🏻
Can someone help me out ,why is my asio driver from nux website isn't getting installed?
Is it possible for future update to allow users to load more than 1 solitary ir?????. Maybe just 5 or 10???? Please
How are you re-amping the USB signal exactly? I have my audio IN and OUT as the NUX MG-300, but my dry track never gets re-amped. I'm using Tracktion Waveform 11 PRO and I hear the wet or dry signal fine and can record it, but the re-amping never gets the dry signal back into the MG-300 when I set it to re-amp mode in QuickTone.
Can we record mg300 using any DAW ? Like garage band in Mac?
Hello! Is there a way to record at the same time the dry and wet signal?
Thank you for the tutorial. I appreciate it.
I want the negative too.Please
Is there a drivers for Windows 8 ??? Can't find it on nux web site...
Do u have Chinese version?
hey man I already installed the driver ASIO fro NUX but it says ASIO inactive in the NUX control panel. Also no sound from input is coming in but the output thru the NUX Speaker is ok. how can I resolve this?>
I can't get sound to play back through the Mg-300 through headphones, etc after recording. QuickTone seems to freeze up when I try to change between wet/dry/reamp. Restarting computer doesn't help. Didn't have this issue with my Scarlett 2i2.
My nux mg 300 cant connect PC, what wrong?
Can I hook to my cellphone
can i connect my speaker monitor without audiointerface?
Hi! I have encountered some trouble with quicktone. I can actually proceed to the GUI of it but there is no sound when i pluck or strum my guitar. My guitar is plugged by the way. I am using windows 10. Checked the device manager in sound section and saw Nux Mg300 Audio saying "Device Cannot Start (Code 10 Error)" with a triangle exclamation point icon on it. How should i fix it? By the way, my only need is to bring the sound of my guitar whenever i use quicktone. Big thanks!
Sadly there are alot of us with the same problem you can try emailing support michael@cherubtechnology.com
How did you move the effects before and after the ampli?
Can we record it using any DAW like garage band on Mac?
While using the MG-300 as an interface i surely can record, but it is impossible to monitor or even play back.
If i want to do that, the only workaround I've found was to set my input to Nux Mg-300 but my output to System Default (Macbook Speakers).
So i have to use my headphones connected to the mac and not to the nux.
I'm using Macbook M1 and logic.
Does anybody knows how to solve this?
does it work on ipad?
Does it work as an ios interface?
Hello, how is the audio quality in this? Is this atleast 24bit?
48KHz Sampling Rate. Better than most multieffect on the range
Please... Reques tutorial update nux mg 20🙏🙏🙏🙏🙏 please....
What kind of USB cord do we need to plug this in to computer?
Type micro-b, android phone cable will work (unless your apple computer doesn't support USB)
Unos me compre la nux mg 300 hace un mes
He creado presets pero pasando un tiempo se borran y es como si volviera a estar con el preset de fabrica alguien puede ayudarme por favor
Best product for the price
Wait, where did you find the mac drivers for nux and how did you install it? It can't be found anywhere.
you have to pay for any drivers and updates
@@andreapasillas5803 No. Never.
@@Sancho_Retablez You haven't tried to download firmware updates recently.
@@andreapasillas5803 What I meant, I never paid for any driver for any device. Never in my life.
Finally I managed to make the MG300 work (no drivers needed) but I resold it. I have the Valeton GP-100 and it's better IMO.
I wasn’t able to update firmware on macOS, I’ll try again on the next update.
Yes, it's broken. I've emailed support about it. It works on Windows though, so if you have access to a Windows machine, you might try that. My device was not bricked after unsuccessful update from Mac. What bothers me though, after the update I checked the firmware version on the device and it still showed 1.00, you would think that it should show 1.06.
I saw some of them are silver knob, some of them are white knob, what’s the difference?
the silver ones are silver, and the white ones are white
@@podoz LMAO damn you beat me to that one!!
Silver knobs are exclusive for domestic market, please avoid getting the silver version.
@@nuxaudio when you say the MG 300 with SILVER knobs are for the domestic market do you mean the CHINESE Domestic Market? And the MG 300 with WHITE KNOBS are for EVERYONE else like US, UK, Au, CA markets.
@@nuxaudio im in the united states and accidentally ordered a silver version off reverb what are the consequences or differences?
Weird how you can clearly hear clicks and glitches at 9:21, but no ones adresses it. Truth is Nux mg-300 is a nice litlle toy, but when it gets to recording, it's useless.
I have the same prob, i thought i was the only one and i think i just got broken nux mg300 cuz i just buy a new one and it's really annoying for the glitches thing
Does it went well if we used audio interface with this mg300?
@@underwa7erboi843 No. when recording, glitches occur all the time. Everything else works good but...
pity PC software is not available for Linux
Needs more preset slot...and some of the effect doesn't do anything...need more stable update
Muy buena mg . Pero Sería bueno que se pudiera hacer la actualización en android digo a través de un Smartphone y tener el QuickTone en android también porque no. Poder manipularlo en el celular.
i cannot connect to my mg300 .. usb not detected..
Some usb cables are charge only, you need a data usb cable. I had the same problem now it’s ok. Find usb cable that used in smartphones for data transfer.
Sadly there are alot of us with the same problem you can try emailing support michael@cherubtechnology.com
Cool, but you're overruning the buffer at times in the reamp it seems.
I have old ex why need new one.
NUX thinks people have 3 hands.