They are really nice and can't be beat for the money. Before these became available, it would cost up to about $2000 for a set that used amber for the signals. That wouldn't even include the other modes. Money well spent, in my opinion. Put some money back little by little and you'll have it before you know it. Thank you for watching!
Great video man! I found your videos on the lights earlier on, but I revisited them after having issues with condensation and being unable to switch the modes. Saw that you commented on a thread in the Mustang6g forum. Gonna try and leave the hazards on a lil longer like you suggested to see if that’ll work. Thanks for the help again. Lol i’ll let you know if that did it.
Hey Brother, I have 2019 GT/CS and I installed these lights, I still cant figure out the modes, I tried they are not changing. Please Advice, Am I missing something? what about the yellow wire you mentioned, do I need to run another wire to the third brake light?
@@BackyardBMX73 is it at possible for yout provide a brief wiring diagram (in layman’s terms )of the taillights?. I’m attempting a custom job with these s550 tails lights soon myself . Would be greatly appreciated
Mode 1 is a cursor. Each light illuminates then goes out as the next one lights up. Mode 4 is sequential. The lights illuminate then stay on as the next one illuminates.
So I just got these and do I have the wire up the third brake light part to even have brake lights, because I got them all hooked up and when I would press the brake it would do one sweep of the amber and then it would just go back to the running light
Scott, that happens when the sequential gets affected by another sequential signal. I had the same issue but I figured it was because of the strobe option I had installed on my third brake light. Once removed it worked fine.
Vland has all kinds of types of tail lights for the same price or cheaper and also free shipping. The quality is no different so if you’re still looking, take a look there
Comprehensive coverage, I like it! Almost fills like the dance in between modes she's twerking LOL
Lol quite the dancer, she is 😂
I like modes 1&4.
I really like mode 1. Something you don't see every day. Really cool that you can change them up when you want to. Thanks for watching!
Great video my man. These are so nice, I just wish I racked up enough money for these haha
They are really nice and can't be beat for the money. Before these became available, it would cost up to about $2000 for a set that used amber for the signals. That wouldn't even include the other modes. Money well spent, in my opinion. Put some money back little by little and you'll have it before you know it. Thank you for watching!
Great video man! I found your videos on the lights earlier on, but I revisited them after having issues with condensation and being unable to switch the modes. Saw that you commented on a thread in the Mustang6g forum. Gonna try and leave the hazards on a lil longer like you suggested to see if that’ll work. Thanks for the help again. Lol i’ll let you know if that did it.
Sounds good, let me know. Thank you for checking me out!
ponie1992 Yeah I still can’t get them to change modes lol. I also did what you did and kept the hazards on for 5 seconds. Dunno what I’m missing.
@@Kyle-he8en you have the yellow wire connected to the third brake light, correct?
ponie1992 yep ive got it connected. Is it that yellow wire that permits me to change the modes?
Not 100% sure, but I know guys have had issues if they didn't connect it. Could just be a faulty set, unfortunately.
Those modes are pretty cool!
I agree! Well worth it!
Mode 1 is awesome. Wish I could afford a smoked set
Yup, mode 1 is cool!
I really wished there was something similar to this for the Camaro!!! Great follow up video broham
Thanks brother! Man, your taillights are sick! I love the smooth sequencing signals on yours!
ponie1992 yeah but your’s are da shit though... they flow so damn well
Hello! Were did you buy your Euro lights? How do set up the different modes? Thanks!🚙💨
Got mine from S550euros on Instagram. Instructions to change modes came with them.
@@BackyardBMX73 Ok thanks.
No problem
Sorry, it was s550euros on Instagram
@@BackyardBMX73 Thanks👍🏻
Great video. Just picked up a set.
Thanks! You'll love em!
Just got some. What’s the difference between 1 and 4?
Mode 1 acts as a cursor. The previous light turns off as the next one lights up. Mode 4 is sequential. The previous stays lit as the next lights up.
For some reason when I have it on mode 4 my signal doesn’t work any fix to this?
Not that I'm aware of. If all other modes work correctly, could be a faulty assembly. I'd contact whoever you got them from.
Hey Brother,
I have 2019 GT/CS and I installed these lights, I still cant figure out the modes, I tried they are not changing.
Please Advice, Am I missing something? what about the yellow wire you mentioned, do I need to run another wire to the third brake light?
Did you run the yellow wire to the 3rd brake light? It's a must for proper operation.
No I didn't, how to do that.
I explain how I routed mine in this video:
ruclips.net/video/bEiGTmZGR2Q/видео.html
Thank you so much
The lights in got doesn't come with the yellow wire, I guess I can't do anything
I've noticed the reverse light also sequences, what reverse light are you using?
Custom, did it myself with small LED strips.
@@BackyardBMX73 is it at possible for yout provide a brief wiring diagram (in layman’s terms )of the taillights?. I’m attempting a custom job with these s550 tails lights soon myself . Would be greatly appreciated
@@bobayagga2233 these are plug and play other than tapping the yellow wire into the third brake light, to get the signal when it lights up.
Well what's the difference between mode 1 and mode 4
Mode 1 is cursor, mode 4 is sequential.
So they jumped one different to have an extra mod looks like there both doing the same thing...
@@goldenglove25 they're distinctly different, in my opinion. Both cool options.
Ok I see how there different now...
@@goldenglove25 🤘
What is the difference between mode 1 & 4?
Mode 1 is a cursor. Each light illuminates then goes out as the next one lights up. Mode 4 is sequential. The lights illuminate then stay on as the next one illuminates.
How do you change between the settings?
I believe I cover that during the install.
ruclips.net/video/bEiGTmZGR2Q/видео.html
So I just got these and do I have the wire up the third brake light part to even have brake lights, because I got them all hooked up and when I would press the brake it would do one sweep of the amber and then it would just go back to the running light
Yeah, I believe it gets the signal to trigger the brake lights from the third brake light.
Scott, that happens when the sequential gets affected by another sequential signal. I had the same issue but I figured it was because of the strobe option I had installed on my third brake light. Once removed it worked fine.
So where can I purchase these lights?
I got them from s550euros on Instagram.
Vland has all kinds of types of tail lights for the same price or cheaper and also free shipping. The quality is no different so if you’re still looking, take a look there
@@trezzer53 mine are Vland brand
First Yesss!!!!
Dammit you’re too fast
🤣🤣🤣
@@TooneTv . . . Ya Snooze ya Lose Bro!!
Coyote carguy lol you right
How much?
Contact s550euros on Instagram and tell him I sent ya. I can't give quotes for him, sorry.