Troubleshooting ClusterXL Part1

[@ArunKumar-we7xo]

Thanks for explanation in such a beautiful way

[@haasjenl9247]

Thanks for the detailed explanation. Only thing that i have to mention is, please don't use the Microsoft Sam voice anymore! (it makes you fall asleep).

[@sachindhawan86]

Thanks a lot...very useful and informative 😊

[@ShanaHimachaliVlog]

Hi
Thanks for your video.
i have faced same type of issue. but ethtool command is not working in R60. can you please suggest.

[@ArunKumar-we7xo]

I have a question what if on both gateways different ccp mode(multicast and broadcast).what is the output of cphaprob stat and cphaprob -a if on both gateways

[@checkpointsupport]

Hi Arun,
In case of one member ccp mode set to broadcast and the other to multicast, in version R80.20 and above, the output is below:
Member A:
=========
[Expert@R80.20_GW1:0]# cphaprob stat
Cluster Mode: High Availability (Active Up) with IGMP Membership
ID Unique Address Assigned Load State Name
1 (local) 12.0.0.1 0% STANDBY R80.20_GW1
2 12.0.0.2 100% ACTIVE R80.20_GW2
Active PNOTEs: None
Last member state change event:
Event Code: CLUS-114802
State change: DOWN -> STANDBY
Reason for state change: There is already an ACTIVE member in the cluster (member 2)
Event time: Tue Feb 4 15:18:30 2020
Cluster failover count:
Failover counter: 0
Time of counter reset: Fri Jan 31 10:12:11 2020 (reboot)
[Expert@R80.20_GW1:0]#
[Expert@R80.20_GW1:0]# cphaprob -a if
CCP mode: Manual (Multicast)
Required interfaces: 3
Required secured interfaces: 1
eth0 Non-Monitored non sync(non secured)
eth1 UP non sync(non secured), multicast
eth2 UP sync(secured), multicast
eth3 UP non sync(non secured), multicast
Virtual cluster interfaces: 2
eth1 10.0.1.150
eth3 13.0.0.10
Member B:
=========
[Expert@R80.20_GW2:0]# cphaprob stat
Cluster Mode: High Availability (Active Up) with IGMP Membership
ID Unique Address Assigned Load State Name
1 12.0.0.1 0% STANDBY R80.20_GW1
2 (local) 12.0.0.2 100% ACTIVE R80.20_GW2
Active PNOTEs: None
Last member state change event:
Event Code: CLUS-114904
State change: ACTIVE(!) -> ACTIVE
Reason for state change: Reason for ACTIVE! alert has been resolved
Event time: Tue Feb 4 15:18:30 2020
Cluster failover count:
Failover counter: 0
Time of counter reset: Fri Jan 31 10:12:11 2020 (reboot)
[Expert@R80.20_GW2:0]#
[Expert@R80.20_GW2:0]# cphaprob -a if
CCP mode: Manual (Broadcast)
Required interfaces: 3
Required secured interfaces: 1
eth0 Non-Monitored non sync(non secured)
eth1 UP non sync(non secured), broadcast
eth2 UP sync(secured), broadcast
eth3 UP non sync(non secured), broadcast
Virtual cluster interfaces: 2
eth1 10.0.1.150
eth3 13.0.0.10
Best Regards

[@deepak3532]

Cluster active device show error freez how we will resove

[@tusharnaik4710]

Awesome video and command is very useful while troubleshooing....you are awesome as always nice way to explain..everything is awesome...if possible share me your email id ...i will ask more question