Thank you so much sir ...Your videos have equally helped me in clearing my critical graphics subject . So blessed You are doing a great job sir ! Respect
Hats off sir it is because of you i have got good marks in my eg paper though others say it is tough and I have started to explain about your channel whoever ask me
Wonderful Mr Manas, if I add little tips for your students, plz follow below two points in traces 1. if any geometrical shape like line , plane etc. on its top view extends towards vertical plane and where it touch is known as the trace and we must be locate it's distance from XY line, that how much it "Above" or "Below" 2. In front view with same condition the meeting on Horizontal plane but this time the Horizontal trace is the distance count "in front" or behind X Y line
a line ab is 70 mm long lying entirely behind V.P and above HP. The HT of the line is 5mm behind VP and the VT is 25mm below HP. The true distance between the horizontal trace and the vertical trace of line is 50mm and true distance between horizontal trace and end A is 30mm.Draw the projections of the line and inclinations with reference lines if end A is left of end B
Thanku so much sir I am so confused in concepts of projections and less confidantal till this time now I am understand all concepts of projection of line and I can solve it ...thanku so much sir again 😊 keep going to help students in this better way ..
C) FV of a line measures 70 min and makes an angle of 30" with XY. The and A in the HP and the VT of the line is to mom below XY. The line is inclined at 45 to the VP. Draw the projections of the line and find its TL. and true inclinations with the HP. Also locate the HT
1. The ends of a line AB are 50 mm and 20 mm above HP. The length of its elevation is 70 mm and its VT is 10 mm above HP. The line is inclined at 40⁰ to VP. Find its true length and true inclination with H P. Also locate its traces. ..sir... Can u help me sir... By solving it...
Problem: The TV of line ‘AB’ measures 60 mm and is inclined at 45° to the XY line. Point ‘A’ is 10 mm above HP and 20 mm in front of VP, Point ‘B’ is 45 mm above HP. Draw the projections of line. Calculate ‘θ’ and TL of a line. Assume the line is in the first quadrant.
very very useful sir but I'm not able to solve this problem Line AB is 175mm long is inclined to VP and parallel to HP.The FV is 125mm long.Its end A is 50mm in front of VP and 75mm above HP.Endpoint B is in 1st Quadrant.Draw its projections and find traces(if any)???? please help me with this problem!!!
Traces Problem 1 FV of line AB makes 450 angle with XY line and measures 60 mm. Line’s TV makes 300 with XY line. End A is 15 mm above HP and it’s VT is 10 mm below HP. Draw projections of line AB, determine inclinations with HP & VP and locate HT, VT.
Sir can u please answer the question a line AB has end A in hp and 50 mm in front of vp.end B is in vp and 65mm above hp.the distance between end projectors of the line when measured along the reference line is 60mm.determine the true length and true inclination with hp and vp..
Shouldn't this be the one was around? The value given in the question on the true length rather than the real length. So b`and b1` should switch places Correct me if I'm wrong.
Glad it helped! All the best 😀Do share this channel and its playlist with your friends. 1. Engineering Drawing Playlist (ENGLISH): ruclips.net/p/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS 2. Engineering Drawing Playlist (HINDI): ruclips.net/p/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU 3. Engineering Mechanics Playlist (OLD): ruclips.net/p/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS 4. Engineering Mechanics Playlist (NEW 2023-2024): ruclips.net/p/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP 5. Mechanics of Solids Playlist: ruclips.net/p/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP 6. Theory of Machines / KOM / DOM Playlist: ruclips.net/p/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU 7. AUTOCAD Playlist: ruclips.net/p/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G 8. Machine Drawing Playlist: ruclips.net/p/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics. Second Channel for Hindi Audience: @btechplus Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc
Thanks Priyanka Do watch all the content on drawing and mechanics..... And do tell your friends about this channel so that they can also benefit..... All the best
Hi Adarsh..Well Thanks for appreciating my work... All the best in life And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401 Small contributions can make a Big Difference
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thank you so much sir ...Your videos have equally helped me in clearing my critical graphics subject .
So blessed
You are doing a great job sir !
Respect
Hats off sir it is because of you i have got good marks in my eg paper though others say it is tough and I have started to explain about your channel whoever ask me
All the best Gopu.....Fly high..
Thank you sir
Wonderful Mr Manas,
if I add little tips for your students,
plz follow below two points in traces
1. if any geometrical shape like line , plane etc. on its top view extends towards vertical plane and where it touch is known as the trace and we must be locate it's distance from XY line, that how much it "Above" or "Below"
2. In front view with same condition the meeting on Horizontal plane but this time the Horizontal trace is the distance count "in front" or behind X Y line
a line ab is 70 mm long lying entirely behind V.P and above HP. The HT of the line is 5mm behind VP and the VT is 25mm below HP. The true distance between the horizontal trace and the vertical trace of line is 50mm and true distance between horizontal trace and end A is 30mm.Draw the projections of the line and inclinations with reference lines if end A is left of end B
Thanku so much sir I am so confused in concepts of projections and less confidantal till this time now I am understand all concepts of projection of line and I can solve it ...thanku so much sir again 😊 keep going to help students in this better way ..
C) FV of a line measures 70 min and makes an angle of 30" with XY. The and A in the HP and the VT of the line is to mom below XY. The line is inclined at 45 to the VP. Draw the projections of the line and find its TL. and true inclinations with the HP. Also locate the HT
thank you for the tip @ 6.59 its a big concept enlightening
: dalna be sale
is it possible that a HT and a VT can lie above and below to XY reference line together if line is inclined to both the planes?
Shouldn't the VT lie in VP?
1. The ends of a line AB are 50 mm and 20 mm above HP. The length of its
elevation is 70 mm and its VT is 10 mm above HP. The line is inclined at 40⁰ to
VP. Find its true length and true inclination with H P. Also locate its traces.
..sir... Can u help me sir... By solving it...
Problem:
The TV of line ‘AB’ measures 60 mm and is inclined at 45° to the XY line.
Point ‘A’ is 10 mm above HP and 20 mm in front of VP, Point ‘B’ is 45 mm
above HP. Draw the projections of line. Calculate ‘θ’ and TL of a line.
Assume the line is in the first quadrant.
very very useful sir but I'm not able to solve this problem
Line AB is 175mm long is inclined to VP and parallel to HP.The FV is 125mm long.Its end A is 50mm in front of VP and 75mm above HP.Endpoint B is in 1st Quadrant.Draw its projections and find traces(if any)????
please help me with this problem!!!
@Abhinav verma yes
Sir,can you help me solving other tutorial problems also??
Thankyou
Traces Problem 1
FV of line AB makes 450 angle with XY line and measures 60 mm.
Line’s TV makes 300 with XY line. End A is 15 mm above HP and it’s VT is 10 mm
below HP. Draw projections of line AB, determine inclinations with HP & VP and locate HT, VT.
Sir can u please answer the question a line AB has end A in hp and 50 mm in front of vp.end B is in vp and 65mm above hp.the distance between end projectors of the line when measured along the reference line is 60mm.determine the true length and true inclination with hp and vp..
Shouldn't this be the one was around? The value given in the question on the true length rather than the real length. So b`and b1` should switch places
Correct me if I'm wrong.
There were certain questions in which we have to take some assume TL and others. Pls tell those. Thanks
+Tanay Kumar
Tanay, you can post those questions......in here
sur how can we describe Ht ?
as 0.6 mm in front of vp?
Sir what if phi is given instead of bita and we need to find out the same thing.
Thanku sir for this video, video is very useful.
Glad it helped!
All the best
😀Do share this channel and its playlist with your friends.
1. Engineering Drawing Playlist (ENGLISH): ruclips.net/p/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS
2. Engineering Drawing Playlist (HINDI): ruclips.net/p/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU
3. Engineering Mechanics Playlist (OLD): ruclips.net/p/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS
4. Engineering Mechanics Playlist (NEW 2023-2024): ruclips.net/p/PLIhUrsYr8yHxeypEyVdWeGNxWHjNxU_JP
5. Mechanics of Solids Playlist: ruclips.net/p/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP
6. Theory of Machines / KOM / DOM Playlist: ruclips.net/p/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU
7. AUTOCAD Playlist:
ruclips.net/p/PLIhUrsYr8yHyLArdiiSDLa0Fmz8YKIy7G
8. Machine Drawing Playlist: ruclips.net/p/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w
Visit Main Channel Page(@manaspatnaikmech) for Playlists on specific topics.
Second Channel for Hindi Audience: @btechplus
Download the Manas Patnaik App for Premium content : bit.ly/3wMRxoc
thank u somuch sir
i really liked ur tutorial
thank u so much
Thanks Priyanka
Do watch all the content on drawing and mechanics.....
And do tell your friends about this channel so that they can also benefit.....
All the best
Welcome dear 😊😊
Sir what if both lines when extended intersect at the same point on the xy line?
Question arises in my mind that why that 10mm VT is not just below that 15mm line like all problems?
Waiting for reply
sir i want to ask, that what the part should be draken and whats not
At 5.38.. locus of VT or VT line..pls clarify my doubt
can you say how to draw traces when distance is not given
Thank you so much sir...
Sir can u explain this bottom question
Very helpful sir
Sir i am suffering from graphics this subject is full tough to me hence sir please give any suggestions. ..😭😓
quit the subject
nice tutorial sir,it will be helpful to my btech semester exam
Hi Adarsh..Well Thanks for appreciating my work...
All the best in life
And if you wanna support my channel visit this link: manaspatnaik.in/?page_id=401
Small contributions can make a Big Difference
@@ManasPatnaikofficial nice sir
TL to find on locus b i.e; a' is center or v' is center i confused
onnu poda
u r great , thank u very much
Thanks ☺️ sir
Sir how can I solve using this condition
6:59
Thanks sir
All the best subhas.....
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): ruclips.net/video/WG6H2pISUzQ/видео.html
2. Engineering Drawing/Graphics (Hindi): ruclips.net/video/SB83cUaAiCM/видео.html
3. Engineering Mechanics / Applied Mechanics: ruclips.net/video/Z4WN2Z9okfs/видео.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: ruclips.net/video/Co4YlavCpeQ/видео.html
5. Theory of Machines: ruclips.net/video/Co4YlavCpeQ/видео.html
6. Machine Drawing: ruclips.net/video/iFCnFUR9Gdc/видео.html
7. Engineering Drawing for Engineering Services Prelims: ruclips.net/p/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU
8. Physics for Class 11: ruclips.net/video/0fejUC79LZY/видео.html
9. Manas Speaks Series: ruclips.net/p/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0
10. Channel 2 Link:
ruclips.net/channel/UC_aqx41HWeOebfL6FqBYU6Q
Wah
Sir please can you make a video on how to approach and solve when points are in 2nd 3rd 4th quadrant
i will surely do that....
can you please tell the truth length.
Its 6.4 cm
Manas Patnaik Thank you.
Thank u sir
Manas ji maine apse question pocha tha apne reply nahi diya
Is problem ko dekh kr Meri Ed me pass hone ki ummmeed zero ho gayi
Hindi me kro na sir jada smjega