Vielen Dank,Thx. To Press the delay and Start button helped to delete the EHO Fehlermeldung. The machine works again. Stupid "geplante Obsoleszenz" planned obsolescence
Hi, thanks for this video, its very helpful and the first video i found, that really helped me 😃 Can you say, what the other options do? My English is not the very best, so i didn't understand everything 😅🙈
dir sir I have the same machine with the same Problem but When I close the door directly appered E40 and with this Error I can do the other steps, what I did First I didn't close the door and I made every Step the same like your video but after Reseting the Error and go to eleo mode it dosn't because the door is not closed , and when I closed the door before this step will go the error E45 again and later E40 . can you pls tell me what will be the next if you have any suggestion. only for informatio I changed the Place for the relay with another one in the Board only to be sur that the relay is not the Problem also tested the first Transistor and it worked also .
I will try it directly today . i have the Problem he runs may 20 min then he starts to piep with in the display E60 after few minutes may 15 min he get in stiop . hopefully it works with teh reset in your video Thanks a lot greetings from Germany
Здравствуйте меня зовут Виктор, у меня такая же проблема показывает Fehlermeldungen E60 я пробывал сушилку прочистить полностью но современем опять показывает ошибка, может вы мне поможете подсказать что можно зделать ? Спасибо :)
Just tried to do this however when I switched it back on, selected my drying mode and pressed start it flashes with Err 🤷♀️ any idea how to help with this problem ??
Hi guys, if your aeg/Electrolux/zanussi heat pump dryer is running 30 minutes normally and then giving e60 (e63 in test mode) just checked the upper capasitor which should be 10uf. You will see it is around 4.5 - 5.0 that is a fault.. I finally solved it. Just replace the 10uf capasitor (the above one, connected to engine motor), no soldering or antything, it is plug and play. Buy it from an electronic market showing the old faulty one, do not buy it from an AEG or other brand shoppers. Otherwise it will be 10 times expensive. There is space to place it into the machine,, so the new one can be a little fat or long, no matter, just be carefull for the values like voltage etc. They are not polarized so you can attach the 2 cables whatever you want. You don't need to disassebly tumble or any thing. Just get the back top and right panel, you will see the 10uf capasitor lying horizontally. Fyi, the below one is 18uf and you need to diassemble tumble and other things to get it back, but fourtunately you can measure it without disassemble.
Because of this video, my dryer is working again. Thanks
Following Your instructions, I found an error code. Corrected the issue, and reset the dryer. Voila - problem solved.
Thanks a lot Mate😊
thank you for this video. with your advice the dryer is working again👊👊👊👌✋
Thanks fixed my dryer too 👏
thanks man you save me i was thinking what can i do without dryer thanks again
Vielen Dank,Thx. To Press the delay and Start button helped to delete the EHO Fehlermeldung. The machine works again. Stupid "geplante Obsoleszenz" planned obsolescence
Thank you so much. Incredible ❤️
Hi, thanks for this video, its very helpful and the first video i found, that really helped me 😃
Can you say, what the other options do? My English is not the very best, so i didn't understand everything 😅🙈
Thanks a lot: we avoided to replace our dryer thanks to your vidéo.
thank you for this help!
Thank you for upload, helpful!
Anyway I can speak to you I'm stumped with this dryer 🤣
dir sir I have the same machine with the same Problem but When I close the door directly appered E40 and with this Error I can do the other steps, what I did First I didn't close the door and I made every Step the same like your video but after Reseting the Error and go to eleo mode it dosn't because the door is not closed , and when I closed the door before this step will go the error E45 again and later E40 . can you pls tell me what will be the next if you have any suggestion. only for informatio I changed the Place for the relay with another one in the Board only to be sur that the relay is not the Problem also tested the first Transistor and it worked also .
how to test dryer model number t56840Lputting into test mode
Hi , i am using my dads one of these , but its not using the condenser so water draw not filling up .
Can you help ?
Ik heb een aeg lavatherm protex condensdroger met storing code e90 hoe kan ik dit repareren mvg Johan
Does anyone know what error code EF6 means? I cannot seem to find it online
Hi can you show a demo of test mode for Aeg lavaterm protex condenser dryer model number t65170 av
Will do if I see one
I will try it directly today . i have the Problem he runs may 20 min then he starts to piep with in the display E60 after few minutes may 15 min he get in stiop . hopefully it works with teh reset in your video Thanks a lot greetings from Germany
Hast du das Problem lösen können ?
Yes Did you manage the Problem error E60 please?
Здравствуйте меня зовут Виктор, у меня такая же проблема показывает Fehlermeldungen E60 я пробывал сушилку прочистить полностью но современем опять показывает ошибка, может вы мне поможете подсказать что можно зделать ?
Спасибо :)
My dryer just shows "Err" when trying to start any program... No other error codes ? What could it be ? I just changed drive belt on it.
Tomi - any luck - we have the same
@@davidrichards1682 Nope, i give up, bought New
Maine haben problem so EhE aber 1 mall geht 1 mal nicht geht maine trocken gleiche wi diese
Just tried to do this however when I switched it back on, selected my drying mode and pressed start it flashes with Err 🤷♀️ any idea how to help with this problem ??
To clear that just switch it off and on again
Здравствуйте
а какая ошибка у вас была ?
ошибка Е60
Ne tharje punon tre her nga 15mbedhjet minuta pastaj nzjer jobin hc2
Кто бы по-русски объяснил. Такая же машинка, но перестаёт работать посредине цикла.
Can have somebody with Error E60 ?
Hi guys, if your aeg/Electrolux/zanussi heat pump dryer is running 30 minutes normally and then giving e60 (e63 in test mode) just checked the upper capasitor which should be 10uf. You will see it is around 4.5 - 5.0 that is a fault.. I finally solved it. Just replace the 10uf capasitor (the above one, connected to engine motor), no soldering or antything, it is plug and play. Buy it from an electronic market showing the old faulty one, do not buy it from an AEG or other brand shoppers. Otherwise it will be 10 times expensive. There is space to place it into the machine,, so the new one can be a little fat or long, no matter, just be carefull for the values like voltage etc. They are not polarized so you can attach the 2 cables whatever you want. You don't need to disassebly tumble or any thing. Just get the back top and right panel, you will see the 10uf capasitor lying horizontally. Fyi, the below one is 18uf and you need to diassemble tumble and other things to get it back, but fourtunately you can measure it without disassemble.