My thoughts as well! I appreciate how he doesn’t reek of “RUclips stoner” and instead talks to us like we’re bright eyed first year students taking our second semester of general chemistry. Thorough yet concise. Easy to understand. Very informative. Friendly but not gimmicky. Just subscribed!
Some people smoke weed and get munchies other smoke weed and learn science. So glad people like you exist! I always thought that was a much more complex procedure
2:38 realizing you don't have a tube rack and then awkwardly holding a centrifuge tube while loading it is a very specific and painfully relatable energy
Legend John, thanks for sharing the nugs of knowledge with us all! I bought an Amazon centrifuge ($180 or so) and some filter tubes (found on eBay for only a few $ each) . IMPORTANT: take note of the size diameter tube that your centrifuge supports, some of the models only support very small thin tubes and it can be really hard to locate filter tubes that actually fit!! I would advise locating the filter tubes first, and then purchasing a centrifuge machine that will support the size. Some filter tubes on the market are super expensive, like more than the centrifuge machine!! so be careful you have the tubes sorted first! I managed to find some filter tubes by a brand called "Millipore" that fit, however after spinning for 20-40 mins, there was no separation because I guess the filter size was too small in the tubes I tested (mine were called 100,000 MWCO for reference), so all the material was still in the upper section. I am investigating the idea of using rosin micron bags, if anyone knows about how to use these with a centrifuge, please let me know the tec! Thanks in advance and happy vaping everyone
Ok this is an amazing tutorial. If I'm not mistaken the best benefit of separating them is so that the terps don't get modified during the decarb. That cart looked so delicious filled! Man I wish the world was sane and I could just by your prime mix carts by mail. Maybe some day. Thanks again for showing all the steps, now I need to go price centrifuges lol!
This tech has been used to separate thca from terps for a good while now. We've been doing it since 2016. You can modify bowls on other centrifuges and process a lot more at the same time. There’s also centrifuges with cooling capabilities, spinning produces heat in the process and partially decarbs thca.
@@IchDuForeverExplorering No, your end product will still have them but they’ll end up in your terps, more than in your thca. I’m not even sure how you dewax and purify solventless, I’maure it’s possible, but it’s easy with hydrocarbons. If you’re working in lab with all the right safety precautions, tools, etc, you can mix your crude with fresh solvent in a mason jar, mix well until oil is dissolved, and winterize it in sub zero temps/cryo freezer. -80c works fastest and best. -40c works but takes longer. Once the terps and thca have separated in main jar, pour oil through brown coffee filter into another jar, thca should remain in jar or fall onto paper filter. Mix both terps and thca that have been separated into separate jars with fresh clean solvent, and freeze and filter again at least 3-4 times. This process is better than using centrifuges because you’re using subzero temps to separate terps and thca, you maintaining more of the terps and have white powdery thca.
I love this, this is literally me. Currently studying chemistry, meanwhile I’m doing a bit of botany and horticulture at home. I have always been intrigued by the cross section of my hobbies
In my late teens & 20s my friends and I would do shrooms, Isd, and ecstasy occasionally. Good times! All were positive, fun, spiritual experiences. But, it's been decades. I don't know anyone who knows anyone who can get psychedelics from. I live in LA & there's a Kush store three blocks from my house, but I can't function alone on weed. I wish they sold psilocybin gummies. I'm a little depressed & a little anxious on a regular basis. I'm not a big drinker and I hate taking pills. A bite or two of a chocolate bar, or a cup of mushroom tea everyday would be a godsent for me.
I’ve been researching on psychedelics and it’s benefits to individuals dealing with Anxiety, Depression, ADHD and from my findings, they really work and I’ve been eager to get some for a while but its been difficult to get my hands on them.
The Trips I've been having really helped me a lot. I’m now able to meditate and I finally feel in control of my emotions and my future and things that used to be mundane to me now seem incredible and full of nuance on top of that I'm way less driven by my ego and I have alot more empathy as well
@ohmakure4716 I feel the same way too. I put too much on my plate and it definitely affects my stress and anxiety levels. I am also glad to be a part of this community.
I always hear people saying microdosing is bad. Microdosing mushrooms can not be deemed bad. A proper guidance from someone with a broad knowledge about it is definitely needed to open you up to the beauty of it
This is so weird and off topic? Is this some kind of bot thing? I did delete a mention of a drug dealer name they were trying to link. So odd, never seen something like this.
Just found this channel last week. You, my friend, are my *new role model.* Life Goals!!!!! _(currently at the entry-level closed pressurized column stage in my extraction journey. I want to eventually get to your level. I know the equip is super expensive though...)_
The centrifuge is actually pretty cheap check the description. Also I don’t even got a closed pressurized column myself you might be a couple steps ahead in the equipment ahha
you can use rosin bags instead of the filter tube if you'd like it to go a bit faster! I've noticed your terps will be very thick if done in this manner as more thca is able to get through the filter, but if you have live resin with decent chunkers, using rosin bags will save ya a couple hours in the centrifuge, and less centrifuge time means less time heating your terps up.
There is a way to do this on a large industrial scale with winery equipment using a screw press a screen and a centrifuge and an organic solvent. It’s possible to do the reaction cold to hot to put different terpenes into aromatic suspension it can be done in an oxygen free environment to ensure maximum plant aroma carry over and bio active material. Nuclearisation is also possible with hydrogen gas.
The medical Marijuana is supposed to duplicate the synthetic component not have a bunch of cripples running around on the bio active plant material. I’d recommend oxidising the oil then treatment with sulphuric acid to the potent non flavoured components.
Today i smoked a diamond for the first time. I crushed up a little bit and put it on some dirt weed that smelled like Grandma's spice rack, pure garbage weed. I got high before we even finished the J. It didn't last as long as a joint of the good good but it was a great high. I didn't get the munchies like i do with the flower. I wasn't disappointed.
Once I gave you unpleasant comment. Sorry for that because you are really making great job with such educational videos. Can you record extractions of cannabis to live resin? Watching such things is really amazing thing.
Minimum maybe $2k... Freshly harvested cannabis (not dried or cured) Solvent (usually butane, which is highly flammable and dangerous to work with) Extraction tube or system Purging equipment (like a vacuum oven) Freezer Safety equipment (gloves, goggles, outdoor workspace) however, if u want to make BHO (Butane Hash Oil) but make it qualify as ''live resin'' just use freshly harvested bud and subject it to below freezing temp. and your bho is live and that can be done for maybe $500 or less.
I love this video 😭 I have been wanting to study biology to apply it to the much needed weed industry for years now and haven’t been able to commit. The weed industry right now is being sabotaged by people who think high THC is everything. Breeding out most of the CBD from strains. We need more critical thinkers in that industry. The quality is trash for 98% of the weed offered
Have to say , I did not expect much.... But Dag Mabit!!! You're Crazy Informative with the small details!! The Tips an Proper Equipment!!! First timers follow your lead, They will be Singing your Praises from the Roof Tops!!😨 Appreciate the Professionalism! I started making moonshine and finally started making RSO!! Getting close to my 50's an arthritis is hell in my hands an knees sometimes. (Hitchhike and Hiking and pack is always Way too Heavy, Dog food usually🐕) But I do a half a dropper(tinctured) every other day. As long as I don't miss too many days of taking it I'm Pain Free On the Reg😉 Ok, I'm done. Really been wanting to share that I guess......☮️
I got a vague comprehension of what you're doing because I know some basic chemistry, but fuck me is this a video loaded with information. The light hearted music and seeming comedic tone of voice doesn't distract from how informative it is lmao
Great to see that this professional centrifuge can't handle litle imbalances. I use a 5ton cnc lathe as a centrifuge. It can easily spin up with a static imbalance in access of 100kg 😂 so my DIY verson works better than the real thing😁 But it's great to have someone explain the proces clearly. Good video. I'm learning things here. Keep up the good work
Professional? This is like the second cheapest centrifuge on Amazon haha I wouldn’t call it professional, your lathe likely costs 10-100x what this device costs
I gotta echo a coule of comments, one of the best recommendations in a while from youtube. Been doing PG/PEG400 vapes for a bit now, this actually would help create pure vapes i think or atleast keep within a near purity. Very excited i found you :)
At 45micron you could get sub 45 micron sugar in your sauce depending on the quality of your crash out. It might clog an atomizer if carts is what you're doing. 45micron is definitely too big if you're using this method to filter particulate from your melted rosin for carts. IF you cant find smaller micron filters you can simply just use a regular ampule with a 2x4 5-10micron rosin bag cut down to size so it sits half way up the tube. Fold the top of the bag over the lip of the ampule and screw it between the lid and tube. Better filtration = 5 - 10 micron
They key is definitely having a 100% clean and quality THCA crash before seperation so you dont have micro crystalization. Then none of this is an issue. But if it isnt crashed well. Filtration is king. On a commercial scale - superior filtration = Less returns. Less returns = more sales. @@CartandPod
Fugeing off 6 g of isolate at a time sounds crazy to me😂 you can set up a centrifuge with micron buckets inside mason jars and do pounds at a time. This is a good proof of concept, though.
@CartandPod I can understand, especially with our hobbies, how this could happen, but we gotta be better man. We will never lose the stigma without a change to be more present. If we want to get high all the time, dope, that's dope, but do it right ✅️ 👌 😉. Great video, although, like I said before, you can get glass vessels to pull the terpenes into. It would also allow for zero loss as you could heat the vessel to remove any/all.
after playing x files on ps2 recently, using microscopes and mixing chems at the exact right amounts, this video is useful to me a scientist at the level of ps2
Side comment, what’s removed is a carboxylic acid (COOH), it seems that your assuming the carboxylic acid is protonated, or your ignoring the hydrogen gas to keep it simple for the non chemists among us lol. Just thought you’d want to hear some constructive informed feedback. I loved the video and learned some amazing techniques!!
So wait you put in live resin into the center of your get the thca diamond separated from the Terps and then you add the to back together to make live resin am I missing something?
@andrewsomebody844 👋 He does this because if you leave the terps in during the decarboxylation they will vaporize and be lost. I personally want just the pure THC Oil and so I won’t add the terps back in. Btw - that clear THC Oil that you saw him produce . . . . a very tiny amount can be placed sublingually under the tongue for a very powerful experience. 1/8th of a teaspoon might seem too powerful for many people.
First of all, thank you very much for the great video, I didn't know this was possible👍👍👍. Since I want to do this again, I have another question: 1.) What are the names of the filters that are in the centrifugal tubes? Where do you get the inserts from? 2.) How many ml do the centrifugal tubes have? 3.) When was the live resin put into the centrifugal tubes, right after the BHO had evaporated or was it already purged? I would be very happy to receive feedback, especially since I still need information about the filter insert👍. Best regards
Hello, thank you for the information, you are a genius. Please, I have a question regarding this process applied to the different types of bho. can it be done? greetings from Ecuador. Please don't ignore me, I've been thinking about this a lot.
This is, without a doubt, one of the best recommendations RUclips has ever fed me. Great video, thank you for taking the time to share this knowledge!
Thank you for the kind words!
My thoughts too I was literally just looking this up the other day and didn't find anything like this
My thoughts as well!
I appreciate how he doesn’t reek of “RUclips stoner” and instead talks to us like we’re bright eyed first year students taking our second semester of general chemistry.
Thorough yet concise. Easy to understand. Very informative. Friendly but not gimmicky.
Just subscribed!
I agree. This has expanded my understanding of how to get them pesky diamonds out!
I doubt that the sticky thing is terpenes. Terpenes should be as liquid as other essential oils.
Some people smoke weed and get munchies other smoke weed and learn science. So glad people like you exist! I always thought that was a much more complex procedure
2:38 realizing you don't have a tube rack and then awkwardly holding a centrifuge tube while loading it is a very specific and painfully relatable energy
The maplestory music just straight killed me 😂 throwback and a half.
Finished watching, mechanical separation is so cool~
As a wise man once said, “Yeah Science!”
"Yeah science bitch"
science bitchhhh
-the jessie
“Science, Bitch!”
only took 4 ounces.😂
Legend John, thanks for sharing the nugs of knowledge with us all! I bought an Amazon centrifuge ($180 or so) and some filter tubes (found on eBay for only a few $ each) . IMPORTANT: take note of the size diameter tube that your centrifuge supports, some of the models only support very small thin tubes and it can be really hard to locate filter tubes that actually fit!!
I would advise locating the filter tubes first, and then purchasing a centrifuge machine that will support the size.
Some filter tubes on the market are super expensive, like more than the centrifuge machine!! so be careful you have the tubes sorted first!
I managed to find some filter tubes by a brand called "Millipore" that fit, however after spinning for 20-40 mins, there was no separation because I guess the filter size was too small in the tubes I tested (mine were called 100,000 MWCO for reference), so all the material was still in the upper section.
I am investigating the idea of using rosin micron bags, if anyone knows about how to use these with a centrifuge, please let me know the tec!
Thanks in advance and happy vaping everyone
Just pinch the top of the bag into the screw tip or press fit of the vial to hold it down.
Good teacher.
Easy to follow and understand. Clear, articulate, and detailed.
Glad I stumbled across this video, interesting, and fun stuff!
Ok this is an amazing tutorial. If I'm not mistaken the best benefit of separating them is so that the terps don't get modified during the decarb. That cart looked so delicious filled!
Man I wish the world was sane and I could just by your prime mix carts by mail. Maybe some day.
Thanks again for showing all the steps, now I need to go price centrifuges lol!
The one linked in the description is under $99
@@CartandPod wow ok then triple thanks for the links as well!!
😂😂❤
That’s cool! The tip with the argon gas to reduce oxidation is awesome! Thanks for sharing this! Very helpful!
The music choices for the background were top notch, thanks :)
I think i found my new favorite channel
This tech has been used to separate thca from terps for a good while now.
We've been doing it since 2016.
You can modify bowls on other centrifuges and process a lot more at the same time.
There’s also centrifuges with cooling capabilities, spinning produces heat in the process and partially decarbs thca.
Yup nothing new
I guess new to rosin@@CartandPod
And I like it. Have you used to cooled or chilled centrifuges?
Nope this is my first one, and was my first time using it for the video as well! But I’ve got more experiments coming up
do the fats and waxes have to be removed for this process to work?
@@IchDuForeverExplorering
No, your end product will still have them but they’ll end up in your terps, more than in your thca.
I’m not even sure how you dewax and purify solventless, I’maure it’s possible, but it’s easy with hydrocarbons.
If you’re working in lab with all the right safety precautions, tools, etc, you can mix your crude with fresh solvent in a mason jar, mix well until oil is dissolved, and winterize it in sub zero temps/cryo freezer. -80c works fastest and best. -40c works but takes longer.
Once the terps and thca have separated in main jar, pour oil through brown coffee filter into another jar, thca should remain in jar or fall onto paper filter.
Mix both terps and thca that have been separated into separate jars with fresh clean solvent, and freeze and filter again at least 3-4 times.
This process is better than using centrifuges because you’re using subzero temps to separate terps and thca, you maintaining more of the terps and have white powdery thca.
Been trying to find info about this all over, thanks for explaining how to use a centrifuge!
This helped restore a bit of my damaged relationship with "trust the science"
Trust the seance
Trust the sauce
I love this, this is literally me. Currently studying chemistry, meanwhile I’m doing a bit of botany and horticulture at home. I have always been intrigued by the cross section of my hobbies
In my late teens & 20s my friends and I would do shrooms, Isd, and ecstasy occasionally. Good times!
All were positive, fun, spiritual experiences. But, it's been decades. I don't know anyone who knows anyone who can get psychedelics from. I live in LA & there's a Kush store three blocks from my house, but I can't function alone on weed. I wish they sold psilocybin gummies. I'm a little depressed & a little anxious on a regular basis. I'm not a big drinker and I hate taking pills.
A bite or two of a chocolate bar, or a cup of mushroom tea everyday would be a godsent for me.
I’ve been researching on psychedelics and it’s benefits to individuals dealing with Anxiety, Depression, ADHD and from my findings, they really work and I’ve been eager to get some for a while but its been difficult to get my hands on them.
The Trips I've been having really helped me a lot. I’m now able to meditate and I finally feel in control of my emotions and my future and things that used to be mundane to me now seem incredible and full of nuance on top of that I'm way less driven by my ego and I have alot more empathy as well
@ohmakure4716
I feel the same way too. I put too much on my plate and it definitely affects my stress and anxiety levels. I am also glad to be a part of this community.
I always hear people saying microdosing is bad. Microdosing mushrooms can not be deemed bad. A proper guidance from someone with a broad knowledge about it is definitely needed to open you up to the beauty of it
This is so weird and off topic? Is this some kind of bot thing? I did delete a mention of a drug dealer name they were trying to link. So odd, never seen something like this.
Damn and here I was thinking pressing was the be all end all, this is some extremely interesting and cool stuff, thanks for sharing and teaching.
Nice. I science and have two mmj , chem related, patents in the field. Fun to watch another beaker shaker ply the trade w/understanding
I was like oh cool scientist does something with THC cool, just found out your whole channel covers this topic cant wait to binge them all
maplestory music be bumpin
It took me minutes it was in my head
Buying a centrifuge.
My guy PLEASE take a melamine sponge to that hotplate lmao.
Melamine sponges are gods gift to cleaning.
@@annyeong6373the fact you made that comment while having Jesus as your avatar is too good. 👏
Just found this channel last week. You, my friend, are my *new role model.*
Life Goals!!!!! _(currently at the entry-level closed pressurized column stage in my extraction journey. I want to eventually get to your level. I know the equip is super expensive though...)_
The centrifuge is actually pretty cheap check the description. Also I don’t even got a closed pressurized column myself you might be a couple steps ahead in the equipment ahha
@CartandPod great information what is the metal piece that's spinning when you're decarbing?
@@General_SaNu he explains what it is right before using it. it's a glass magnetic stir bar.
@@xavierdoppler9997 does the potency of the THC matters or it's mainly the thca that's separated is purified no matter what strain
@@General_SaNu you have to specify what you're asking a little bit more.
This guy is a G nothing but respect for you bro thanks for the knowledge
you can use rosin bags instead of the filter tube if you'd like it to go a bit faster! I've noticed your terps will be very thick if done in this manner as more thca is able to get through the filter, but if you have live resin with decent chunkers, using rosin bags will save ya a couple hours in the centrifuge, and less centrifuge time means less time heating your terps up.
Yes I’ve been suggesting this to people who cannot find the filters as well :)
Which Rosin bags do you use?
@user-fz2od7xb7y any, try around 25 mic
There is a way to do this on a large industrial scale with winery equipment using a screw press a screen and a centrifuge and an organic solvent. It’s possible to do the reaction cold to hot to put different terpenes into aromatic suspension it can be done in an oxygen free environment to ensure maximum plant aroma carry over and bio active material. Nuclearisation is also possible with hydrogen gas.
The medical Marijuana is supposed to duplicate the synthetic component not have a bunch of cripples running around on the bio active plant material. I’d recommend oxidising the oil then treatment with sulphuric acid to the potent non flavoured components.
Your still kicking out some awesome footage! Thanks man!
Today i smoked a diamond for the first time. I crushed up a little bit and put it on some dirt weed that smelled like Grandma's spice rack, pure garbage weed. I got high before we even finished the J. It didn't last as long as a joint of the good good but it was a great high. I didn't get the munchies like i do with the flower. I wasn't disappointed.
Awesome video brother!
I like the way you "how-to"✌🏼
I wish I knew you well enough to ask you to send me one of those carts so I can try it. It looks so fresh!
Once I gave you unpleasant comment. Sorry for that because you are really making great job with such educational videos. Can you record extractions of cannabis to live resin? Watching such things is really amazing thing.
The setup to make live resin would costs tens of thousands of dollars and be outside my budget as well as 99% of my viewers sadly.
@@CartandPod wow so expensive. How about CO2 extractions? Or maybe something like "nugsmasher" press?
Minimum maybe $2k...
Freshly harvested cannabis (not dried or cured)
Solvent (usually butane, which is highly flammable and dangerous to work with)
Extraction tube or system
Purging equipment (like a vacuum oven)
Freezer
Safety equipment (gloves, goggles, outdoor workspace)
however, if u want to make BHO (Butane Hash Oil) but make it qualify as ''live resin'' just use freshly harvested bud and subject it to below freezing temp. and your bho is live and that can be done for maybe $500 or less.
Not saying its safe but blasting fresh frozen into a jar with dry ice is a thing, however dumb
I was referring to co2 as the expensive method
Now that I’m older I love learning about stuff like this
Just yesterday i was thinking of putting live resin in a centrifuge and now look. Just such a video on youtube..
Favorite weedtuber. Keep up the work man.
Bro just dropped Gems .. matter fact even better, Diamonds 💎 🎉😂 THANK YOU FOR THE INFO BRO ! Keep dropping videos!
💯
I love this video 😭
I have been wanting to study biology to apply it to the much needed weed industry for years now and haven’t been able to commit. The weed industry right now is being sabotaged by people who think high THC is everything.
Breeding out most of the CBD from strains. We need more critical thinkers in that industry.
The quality is trash for 98% of the weed offered
You answered all my questions by the end of the video 👌🏻 very thorough lol
idk why youtube recommended this but the maplestory music was chill
Love your content dude😂❤🎉
Have to say , I did not expect much.... But Dag Mabit!!! You're Crazy Informative with the small details!! The Tips an Proper Equipment!!! First timers follow your lead, They will be Singing your Praises from the Roof Tops!!😨 Appreciate the Professionalism! I started making moonshine and finally started making RSO!! Getting close to my 50's an arthritis is hell in my hands an knees sometimes. (Hitchhike and Hiking and pack is always Way too Heavy, Dog food usually🐕) But I do a half a dropper(tinctured) every other day. As long as I don't miss too many days of taking it I'm Pain Free On the Reg😉 Ok, I'm done. Really been wanting to share that I guess......☮️
My guy took a dab between cuts around 17:35 to 17:45 lol. Totally chopped. 😂
I got a vague comprehension of what you're doing because I know some basic chemistry, but fuck me is this a video loaded with information. The light hearted music and seeming comedic tone of voice doesn't distract from how informative it is lmao
Altitude also plays an important factor in heating anything. Make sure to lower your temps at higher altitudes.
This is the man we needed
All Hail Science!!! 😎
You spelt satan wrong 😑
This is why you don't cheat on spelling tests I cannot spell now! lol@@ethanhayward2424
@@ethanhayward2424satan is so edgy and cool !
@@clalam5241 ya I know that doofus 😎
@@clalam5241 meet me behind the monkey bars 4:15 sharp, nerd 🤬
I just quit smoking. Saved me a lot of money on centrifuges
Haha
I suddenly want a centrifuge for Christmas
I would do switches every 15-20 min with 88 degrees. never pass that if possible. Chilled tubes wonderful idea! You are great, glad to of subscribed!
One you pass 70 your degrading terpiens
Great to see that this professional centrifuge can't handle litle imbalances. I use a 5ton cnc lathe as a centrifuge. It can easily spin up with a static imbalance in access of 100kg 😂 so my DIY verson works better than the real thing😁
But it's great to have someone explain the proces clearly. Good video. I'm learning things here. Keep up the good work
Professional? This is like the second cheapest centrifuge on Amazon haha I wouldn’t call it professional, your lathe likely costs 10-100x what this device costs
i wish i could sample one right now. potent medecine!
You can use 3 tubes to balance a centrifuge provided you place the tubes in a triangular configuration
Yup but I didn’t have enough resin for that
I gotta echo a coule of comments, one of the best recommendations in a while from youtube. Been doing PG/PEG400 vapes for a bit now, this actually would help create pure vapes i think or atleast keep within a near purity. Very excited i found you :)
Eww don’t use pg and especially don’t use PEG that isn’t safe to inhale
You were definitely stoned after the mixing of the terpenes commenced, but that's okay, so was I.
I feel like this channel is going to make me impulse buy some expensive toys.
The maplestory music takes me back lol
Great educational material and beautiful end product. Thanks!
this is the weed equivalent of peeling the icing off of an oreo, just to put the icing and cookie all back in your mouth together
Sure but with one half less wafer
😂😂@@CartandPod
Great music choice..maybe one day Maplestory will make old school servers
this is generally the method we used to bring live resin pens to colorado
At 45micron you could get sub 45 micron sugar in your sauce depending on the quality of your crash out. It might clog an atomizer if carts is what you're doing.
45micron is definitely too big if you're using this method to filter particulate from your melted rosin for carts.
IF you cant find smaller micron filters you can simply just use a regular ampule with a 2x4 5-10micron rosin bag cut down to size so it sits half way up the tube.
Fold the top of the bag over the lip of the ampule and screw it between the lid and tube.
Better filtration = 5 - 10 micron
The terp sauce won’t clog at 10-30% usage. I prefer the extra stuff in it from the larger micron size
They key is definitely having a 100% clean and quality THCA crash before seperation so you dont have micro crystalization.
Then none of this is an issue. But if it isnt crashed well. Filtration is king.
On a commercial scale - superior filtration = Less returns. Less returns = more sales.
@@CartandPod
He definitely does weed. But also highly informative! Now i need to find a cheap but good centrifuge...
The one I used in the video and have linked in the description is under $99 usd. As cheap as it gets.
@@CartandPod Oh damn, i didn't even look at the video description, but started googling immediately... thanks! ♥
The Maplestory nostalgia keeps hitting me so hard, man.
Amazing Video, keep up the Great Content ❤️💛💚
maplestory ost will forever live on
Fugeing off 6 g of isolate at a time sounds crazy to me😂 you can set up a centrifuge with micron buckets inside mason jars and do pounds at a time. This is a good proof of concept, though.
You can do more ofc, I only had a little bit of live resin
Very informative. It’s a game changer☝🏽
What a guy what a video very smart and understandable
You know the guy is legit when he wears a lab coat. Just kidding btw i loved your video.
Finally got a reason to get a nice lab coat, guess I got a new hobby..
this guy is great, now I've gotta find myself a cheap centrifuge ;p
Link in description to a
Great video. I love the down to earth teaching methods for us low budget folks. One question, can this be done with live rosin? Thanks teacher.
Yes I’ll be doing a video on rosin soonish
when it will come?@@CartandPod
lmao, the ethanol on the hotplate, way to give the cannabis community a strong name!
I had no water nearby the place was just starting renovations
Plus it could use a little cleaning like I said haha
@CartandPod I can understand, especially with our hobbies, how this could happen, but we gotta be better man. We will never lose the stigma without a change to be more present. If we want to get high all the time, dope, that's dope, but do it right ✅️ 👌 😉. Great video, although, like I said before, you can get glass vessels to pull the terpenes into. It would also allow for zero loss as you could heat the vessel to remove any/all.
They don’t make glass ones with the filters sadly
Which kda size do you use for the filter tubes ? I guess thca has molecular weight of 60 kda so i should be altoght with 50 kda ?
I love this channel. ❤🎉
Well, I don't have a centrifuge but I am a patient man and I like my jar tek diamonds.
Its costs just under $99 it’s surprising cheap
Can u plz make a video about how to turn juicy diamonds into live resin for pens? I have looked so hard and can’t find any instructions
This definitely earned a follow
I’m recreating this using the spin cycle on my washing machine, wish me luck
💪🔄💨
One of the healthiest ways to separate.
Bruh how did we go from CustomGrow420 to legit science
Bros putting it out there.
15:40 this looks like an...interesting art piece
Music is relaxing
OHHH this is pot related... I'm just such a nerd I click on this kind of stuff even when it's not related to getting blazed.
Loving the Tetris music
Maplestory not Tetris ;p
Thx for the method of terps extraction before making edibles. Could use them elsewhere. Nice 👍
You will be the perfect parent. Do as I say, not as I do.
Can you use hash Rosin instead of Resin?
I'd like to see a video where you shove a whole plant into a pollen seeve. 7 layers or more to show the whole thing separated into parts.
What is a pollen seeve? Google doesn’t return any results
Like this? Dry Ice Hash Rosin
ruclips.net/video/AMMIBl_iD88/видео.html
@CartandPod i ment to say sieve. My bad. Crush a whole plant through the micron levels for stems seeds etc. all the way down.
Highly recommended you invest in a quality mic, this is some great content but a better mic would definitely make this a 10/10 video
after playing x files on ps2 recently, using microscopes and mixing chems at the exact right amounts, this video is useful to me a scientist at the level of ps2
My man was big mad about the 250-300 thing 😂
Haha
Side comment, what’s removed is a carboxylic acid (COOH), it seems that your assuming the carboxylic acid is protonated, or your ignoring the hydrogen gas to keep it simple for the non chemists among us lol. Just thought you’d want to hear some constructive informed feedback. I loved the video and learned some amazing techniques!!
Just keeping it simple by saying co2/carboxyl group, it’s already too complex to follow for most haha
@@CartandPod I can totally appreciate that. Thank you for sharing your knowledge!!!
Terp sauce drew me in
So wait you put in live resin into the center of your get the thca diamond separated from the Terps and then you add the to back together to make live resin am I missing something?
@andrewsomebody844 👋
He does this because if you leave the terps in during the decarboxylation they will vaporize and be lost. I personally want just the pure THC Oil and so I won’t add the terps back in. Btw - that clear THC Oil that you saw him produce . . . . a very tiny amount can be placed sublingually under the tongue for a very powerful experience. 1/8th of a teaspoon might seem too powerful for many people.
You could have weighed the tool used for scooping and then just added the resin and reweigh tool to get a more exact weight for each container.
First of all, thank you very much for the great video, I didn't know this was possible👍👍👍.
Since I want to do this again, I have another question:
1.) What are the names of the filters that are in the centrifugal tubes? Where do you get the inserts from?
2.) How many ml do the centrifugal tubes have?
3.) When was the live resin put into the centrifugal tubes, right after the BHO had evaporated or was it already purged?
I would be very happy to receive feedback, especially since I still need information about the filter insert👍.
Best regards
I think your kinda like “Nile Green” -so cool to see science stuff with weed
Hello, thank you for the information, you are a genius. Please, I have a question regarding this process applied to the different types of bho. can it be done? greetings from Ecuador. Please don't ignore me, I've been thinking about this a lot.
Depends on if it’s terpy enough and if the thc is starting to clump up